OLD: BFGMiner 3.10.0: modular ASIC+FPGA, GBT+Strtm, RPC, Mac/Lnx/W64, AntU1, DRB - page 124.

vulgartrendkill

hero member

Activity: 518

Merit: 500

Quote from: HellDiverUK on September 20, 2013, 03:51:14 AM

Code?

I added the --http-port 8330 command to the shortcut, and pointed the blades at the IP of the machine. As it says in the README.ASIC

So thats all you have to do for bfg to recognise the cards (excluding set up of blade config page?)

HellDiverUK

hero member

Activity: 1246

Merit: 501

Quote from: HellDiverUK on September 20, 2013, 02:30:38 AM

Got 3.2.1 running on Windows 7 Enterprise x86 last night. As soon as the Blade connected to BFG, BFG just quit/disappeared. Upon reopening BFG everything worked perfectly. Connected the second Blade, and again BFG quits. I've rebooted etc several times, and BFG is happy now.

To me, it seems BFG quits on the very first instance on a Blade connecting to the HTTP port (perhaps something craps out creating the virtual device?).

3.2.1 works OK on Linux, on the same machine (Intel NUC DCCP847DYE) with 4GB RAM and 30GB Kingston SSD).

Scratch that. First time the Blade connects at each reboot, BFG quits. It runs perfectly every time until the next reboot.

Blades aren't being restarted, just using the Switch Server function (the backup server are to a stratum_proxy running on my WHS.

HellDiverUK

hero member

Activity: 1246

Merit: 501

Quote from: 2GOOD on September 19, 2013, 07:48:44 PM

Luke, wanted to give it a try with one blade... on 7x64 I must use 32bit since blades are not supported in x64... but something's wrong with --http-port option, here's what I get:

It only works on 32-bit. As in, not on 64-bit. Why are you running it on 64-bit and expecting it to work? Huh

HellDiverUK

hero member

Activity: 1246

Merit: 501

Code?

I added the --http-port 8330 command to the shortcut, and pointed the blades at the IP of the machine. As it says in the README.ASIC

vulgartrendkill

hero member

Activity: 518

Merit: 500

Quote from: HellDiverUK on September 20, 2013, 02:30:38 AM

Got 3.2.1 running on Windows 7 Enterprise x86 last night. As soon as the Blade connected to BFG, BFG just quit/disappeared. Upon reopening BFG everything worked perfectly. Connected the second Blade, and again BFG quits. I've rebooted etc several times, and BFG is happy now.

To me, it seems BFG quits on the very first instance on a Blade connecting to the HTTP port (perhaps something craps out creating the virtual device?).

3.2.1 works OK on Linux, on the same machine (Intel NUC DCCP847DYE) with 4GB RAM and 30GB Kingston SSD).

Would you be able to give me an example of the code you used with BFG to get the blades working please? I've got mine at home to set up when I finish work and I7d love to get them up and running asap.

Thanks

HellDiverUK

hero member

Activity: 1246

Merit: 501

Quote from: Beans on September 20, 2013, 01:04:16 AM

I need to pick up a pc this week just to run my butterfly singles. LTC mining on the same rig is more trouble then its worth. I would like to get somthing I may have use for down the road. Has anyone been able to run bfgminer on a windows 8 tablet? Easyminer is the only thing I know for sure, that runs on a win tablet but it's complete garbage.

I wouldn't bother - you could pick up a "real" PC for less than a shitty tablet.

That said, I don't see why it wouldn't work...

HellDiverUK

hero member

Activity: 1246

Merit: 501

Got 3.2.1 running on Windows 7 Enterprise x86 last night. As soon as the Blade connected to BFG, BFG just quit/disappeared. Upon reopening BFG everything worked perfectly. Connected the second Blade, and again BFG quits. I've rebooted etc several times, and BFG is happy now.

To me, it seems BFG quits on the very first instance on a Blade connecting to the HTTP port (perhaps something craps out creating the virtual device?).

3.2.1 works OK on Linux, on the same machine (Intel NUC DCCP847DYE) with 4GB RAM and 30GB Kingston SSD).

Beans

hero member

Activity: 518

Merit: 500

I need to pick up a pc this week just to run my butterfly singles. LTC mining on the same rig is more trouble then its worth. I would like to get somthing I may have use for down the road. Has anyone been able to run bfgminer on a windows 8 tablet? Easyminer is the only thing I know for sure, that runs on a win tablet but it's complete garbage.

baby_ghost

member

Activity: 89

Merit: 10

Blade with bfgminer successfully, but I can run it on some seconds only, it started and mine, but when have som reject or another reasons which I don't know, bfgminer windows disappear and gone.

2GOOD

hero member

Activity: 547

Merit: 531

First bits: 12good

Luke, wanted to give it a try with one blade... on 7x64 I must use 32bit since blades are not supported in x64... but something's wrong with --http-port option, here's what I get:

Code:

Failed to init bfd from (C:\bfgminer-3.2.1-win32\libplibc-1.dll)
0x6ef48397 : C:\bfgminer-3.2.1-win32\libplibc-1.dll : _win_SetHandleType
0x424eed : C:\bfgminer-3.2.1-win32\bfgminer.exe : /home/luke-jr/Projects/Educati
on/Tonal/BitCoin/cgminer/make-release-tmp/bfgminer-3.2.1-tmp/miner.c (10331) : i
n function (main)
0x4010bb : C:\bfgminer-3.2.1-win32\bfgminer.exe : crt1.c
Failed to init bfd from (C:\Windows\SysWOW64\ntdll.dll)
0x77c39ed2 : C:\Windows\SysWOW64\ntdll.dll : RtlInitializeExceptionChain
Failed to init bfd from (C:\Windows\SysWOW64\ntdll.dll)
0x77c39ea5 : C:\Windows\SysWOW64\ntdll.dll : RtlInitializeExceptionChain

Without --http-port it is hashing away with one card

Luke-Jr

legendary

Activity: 2576

Merit: 1186

Quote from: Xer0 on September 19, 2013, 06:12:30 PM

Quote from: Luke-Jr on September 13, 2013, 12:15:25 PM

Quote from: Xer0 on September 13, 2013, 11:15:50 AM

when to expect stratum proxy enabled for OpenWRT?

After I decide to write stratum proxy support (or someone else contributes it), at least Tongue

i tought its already included in the general Linux and rPi source, is it so much different for OpenWRT?

There is no stratum proxy support in BFGMiner at all right now, but it is a Planned Feature™.

Xer0

hero member

Activity: 826

Merit: 1000

°^°

Quote from: Luke-Jr on September 13, 2013, 12:15:25 PM

Quote from: Xer0 on September 13, 2013, 11:15:50 AM

when to expect stratum proxy enabled for OpenWRT?

After I decide to write stratum proxy support (or someone else contributes it), at least Tongue

i tought its already included in the general Linux and rPi source, is it so much different for OpenWRT?

HellDiverUK

hero member

Activity: 1246

Merit: 501

Quote from: Luke-Jr on September 19, 2013, 12:07:07 PM

Quote from: HellDiverUK on September 19, 2013, 11:34:47 AM

Any news on BFG supporting the RedFury USB (2.5GH) miners, Luke?

Andreas has provided some code, but I don't have a unit to test with.
Just pushed a "bigpic" branch based on Andreas's code merged up, if you want to try it out.
It looks like there's a lot of code in there that will be redundant with the metabank/littlefury code, so I should probably merge the two before it'll be 3.3-ready.

I don't have one yet, there's a local group buy just starting, so maybe in a few weeks. I'll of course try it if/when the miner appears.

OtaconEmmerich

full member

Activity: 235

Merit: 100

3.1.4 seems stable, any reason why 3.2.0/1 is so fickle on my PC now? When I first got it it it was stable enough...Odd.

JBT

full member

Activity: 165

Merit: 100

i am getting loads of stratum connection to pool 0 interrupted errors

JBT

full member

Activity: 165

Merit: 100

Quote from: Luke-Jr on September 19, 2013, 12:38:44 PM

Quote from: JBT on September 19, 2013, 12:36:16 PM

ok maybe i read this wrong can i disable the gpu but autoscan for all the usb eruptors?

-S opencl:noauto -S erupter:all

lol ty Luke

OtaconEmmerich

full member

Activity: 235

Merit: 100

Quote from: Luke-Jr on September 19, 2013, 12:33:53 PM

Quote from: OtaconEmmerich on September 19, 2013, 12:30:47 PM

Yep, same setup.

Can you try 3.1.4 on the same PC that 3.2.0 has the issue on?

I'll try that out, but I'll give an update in about an hour.

Luke-Jr

legendary

Activity: 2576

Merit: 1186

Quote from: JBT on September 19, 2013, 12:36:16 PM

ok maybe i read this wrong can i disable the gpu but autoscan for all the usb eruptors?

-S opencl:noauto -S erupter:all

JBT

full member

Activity: 165

Merit: 100

ok maybe i read this wrong can i disable the gpu but autoscan for all the usb eruptors?

ed. nm found it -S eruper:all -G ,still pondering going the usb route since the comm ports change sometimes and would like to see if a device is zomby or working

Luke-Jr

legendary

Activity: 2576

Merit: 1186

Quote from: OtaconEmmerich on September 19, 2013, 12:30:47 PM

Yep, same setup.

Can you try 3.1.4 on the same PC that 3.2.0 has the issue on?

Topic: OLD: BFGMiner 3.10.0: modular ASIC+FPGA, GBT+Strtm, RPC, Mac/Lnx/W64, AntU1, DRB - page 124. (Read 1193219 times)