my question was a little bit confused.
the anminters were found on win2008 r2 machine with bfgminer. the bifury's not. The "Ants" where shown in the sysconfig with sllabs drivers and the bifuries shown as bifuries.
Topic: OLD: BFGMiner 3.10.0: modular ASIC+FPGA, GBT+Strtm, RPC, Mac/Lnx/W64, AntU1, DRB - page 50. (Read 1193208 times)
January 28, 2014, 05:15:39 AM
January 28, 2014, 03:40:21 AM
unplug em all.
cpanel remove the CP drivers cgminer installed.
In Windows 7 admin command prompt.
set DEVMGR_SHOW_NONPRESENT_DEVICES=1
devmgmt
Then pick show hidden devices
And delete all com ports
look for any other drivers ports ect that zdaig may have installed. (grey ones are no longer installed devices) safe to remove.
reboot
reinstall the sllabs drivers
reboot
install all usb asics
reboot
run BFGminer
cpanel remove the CP drivers cgminer installed.
In Windows 7 admin command prompt.
set DEVMGR_SHOW_NONPRESENT_DEVICES=1
devmgmt
Then pick show hidden devices
And delete all com ports
look for any other drivers ports ect that zdaig may have installed. (grey ones are no longer installed devices) safe to remove.
reboot
reinstall the sllabs drivers
reboot
install all usb asics
reboot
run BFGminer
January 28, 2014, 03:17:52 AM
What can be the prob, that bgminer (3.10.0) running on a w2k8 r2/win7 machine doesn't found my 2 bifury's (cgminer does it).
If cgminer sees them, that means you Zadig'd it (which breaks the real driver).You'll need to undo that (somehow) to get it to work properly again.
January 28, 2014, 02:51:44 AM
What can be the prob, that bgminer (3.10.0) running on a w2k8 r2/win7 machine doesn't found my 2 bifury's (cgminer does it).
On Win7 it founds my BitMinter Ant1.
thx
On Win7 it founds my BitMinter Ant1.
thx
January 28, 2014, 01:11:58 AM
Any chance of having BFGminer on BAMT? Been trying to install all day without success.
Unfortunately, BAMT died with GPU mining.The last release, 0.5, was nearly 2 years ago.
If you can figure out where to get the 0.6 beta, it had BFGMiner, but the version is ancient by now
January 28, 2014, 01:02:29 AM
Any chance of having BFGminer on BAMT? Been trying to install all day without success.
January 27, 2014, 07:12:03 PM
No GPU support?
Launch bfgminer with the -S opencl:auto argument to mine with GPUs. In the next update to bfgminer, launching bfgminer with the --scrypt argument will automatically scan for GPUs.
January 27, 2014, 06:45:43 PM
No GPU support?
January 27, 2014, 01:30:05 PM
I wonder if the new hubs we got from razorfishsl would be perfect for that kind of overclocking? I bet they would.
listen up wot is going on?
i have an antminer u1 and im using bfgminer 3.10.0
antminer is clocked to 2.2gh/s using code 0A81 however... it does not clock at that speed it just stays at the default 1.6gh/s
however... i can set it second best at 2gh/s using code 0981 and it stays at that speed.
WOT is going on?? doth the program not like letters in the freq code or?
clocking 2.2gh/s worked in cgminer however... i switched to bfg as i dont want to pull multiple erupters out of usb ports incase they get ted broken.
in any case... im losing 10% hash rate because of this WOT DO I DO should i continue with this ponzi scheme just wot do i do.
in any case wot is a hash error rate? if there is too much will the work be destroyed?
regarded
ipoomyself
2.2 IS VERY DIFFICULT TO overclock to . you need a stud hub with very good power regulation. 2.0 is easy to do. so what is the hub that you are using?i have an antminer u1 and im using bfgminer 3.10.0
antminer is clocked to 2.2gh/s using code 0A81 however... it does not clock at that speed it just stays at the default 1.6gh/s
however... i can set it second best at 2gh/s using code 0981 and it stays at that speed.
WOT is going on?? doth the program not like letters in the freq code or?
clocking 2.2gh/s worked in cgminer however... i switched to bfg as i dont want to pull multiple erupters out of usb ports incase they get ted broken.
in any case... im losing 10% hash rate because of this WOT DO I DO should i continue with this ponzi scheme just wot do i do.
in any case wot is a hash error rate? if there is too much will the work be destroyed?
regarded
ipoomyself
January 27, 2014, 01:04:20 PM
listen up wot is going on?
i have an antminer u1 and im using bfgminer 3.10.0
antminer is clocked to 2.2gh/s using code 0A81 however... it does not clock at that speed it just stays at the default 1.6gh/s
however... i can set it second best at 2gh/s using code 0981 and it stays at that speed.
WOT is going on?? doth the program not like letters in the freq code or?
clocking 2.2gh/s worked in cgminer however... i switched to bfg as i dont want to pull multiple erupters out of usb ports incase they get ted broken.
in any case... im losing 10% hash rate because of this WOT DO I DO should i continue with this ponzi scheme just wot do i do.
in any case wot is a hash error rate? if there is too much will the work be destroyed?
regarded
ipoomyself
2.2 IS VERY DIFFICULT TO overclock to . you need a stud hub with very good power regulation. 2.0 is easy to do. so what is the hub that you are using? i have an antminer u1 and im using bfgminer 3.10.0
antminer is clocked to 2.2gh/s using code 0A81 however... it does not clock at that speed it just stays at the default 1.6gh/s
however... i can set it second best at 2gh/s using code 0981 and it stays at that speed.
WOT is going on?? doth the program not like letters in the freq code or?
clocking 2.2gh/s worked in cgminer however... i switched to bfg as i dont want to pull multiple erupters out of usb ports incase they get ted broken.
in any case... im losing 10% hash rate because of this WOT DO I DO should i continue with this ponzi scheme just wot do i do.
in any case wot is a hash error rate? if there is too much will the work be destroyed?
regarded
ipoomyself
January 27, 2014, 12:12:36 PM
Been a while and curious about this issue and wondering if it's been sorted or looked at yet.
https://github.com/luke-jr/bfgminer/issues/374
https://github.com/luke-jr/bfgminer/issues/374
January 27, 2014, 12:06:48 PM
i have a little problem running bfgminer 3.10.0 with 2 block erupters.
ICA 0: | 427.1/330.6/ 0.00Mh/s | A: 0 R:0+0(none) HW:1/100%
ICA 1: | 402.2/332.2/326.8Mh/s | A:425 R:2+0(.47%) HW:0/none
ICA1 works like it should but ICA0 not.
i can see 427.1Mh/s on ICA0 but why there is A: 0?
please help
ICA 0: | 427.1/330.6/ 0.00Mh/s | A: 0 R:0+0(none) HW:1/100%
ICA 1: | 402.2/332.2/326.8Mh/s | A:425 R:2+0(.47%) HW:0/none
ICA1 works like it should but ICA0 not.
i can see 427.1Mh/s on ICA0 but why there is A: 0?
please help
1. Your batch file should have -S erupter:all and then it's called BES in the listings. ICA (icarus) is (was) an earlier device that used a similar profile.
2. Either your first device is faulty or you need a powered hub.
January 27, 2014, 11:25:48 AM
i have a little problem running bfgminer 3.10.0 with 2 block erupters.
ICA 0: | 427.1/330.6/ 0.00Mh/s | A: 0 R:0+0(none) HW:1/100%
ICA 1: | 402.2/332.2/326.8Mh/s | A:425 R:2+0(.47%) HW:0/none
ICA1 works like it should but ICA0 not.
i can see 427.1Mh/s on ICA0 but why there is A: 0?
please help
ICA 0: | 427.1/330.6/ 0.00Mh/s | A: 0 R:0+0(none) HW:1/100%
ICA 1: | 402.2/332.2/326.8Mh/s | A:425 R:2+0(.47%) HW:0/none
ICA1 works like it should but ICA0 not.
i can see 427.1Mh/s on ICA0 but why there is A: 0?
please help
January 27, 2014, 02:38:43 AM
Thanks guys, .00001700 is 17.00uBTC I hope 
January 27, 2014, 02:21:54 AM
On the BFGminer stat screen, what is I:17.00uBTC/hr or rather what is uBTC ?
100th 1000th 10,000th 100,000th 1,000000th BTC ? 1.0000000 where is decimal on 8 digits for 17 uBTC.
0.000000017 <-- that100th 1000th 10,000th 100,000th 1,000000th BTC ? 1.0000000 where is decimal on 8 digits for 17 uBTC.
17uBTC would be 0.000017
Of course it could just be to late at night, I've had a few beers and I should be in bed.
January 27, 2014, 02:02:27 AM
On the BFGminer stat screen, what is I:17.00uBTC/hr or rather what is uBTC ?
100th 1000th 10,000th 100,000th 1,000000th BTC ? 1.0000000 where is decimal on 8 digits for 17 uBTC.
0.000000017 <-- that100th 1000th 10,000th 100,000th 1,000000th BTC ? 1.0000000 where is decimal on 8 digits for 17 uBTC.
January 27, 2014, 12:48:25 AM
On the BFGminer stat screen, what is I:17.00uBTC/hr or rather what is uBTC ?
100th 1000th 10,000th 100,000th 1,000000th BTC ? 1.0000000 where is decimal on 8 digits for 17 uBTC.
100th 1000th 10,000th 100,000th 1,000000th BTC ? 1.0000000 where is decimal on 8 digits for 17 uBTC.
January 26, 2014, 10:55:20 PM
I tried to search for this info, but could not find anything. Given the fact there are rejected shares, how can the "all time average hashrate based on accepted shares" (118.5Gh/s) be larger than the "all time average hashrate" (117.4Gh/s)? How can the pool accept shares faster than the miner can generate them?
http://i650.photobucket.com/albums/uu229/ericisback1/photo-1.jpg
http://i650.photobucket.com/albums/uu229/ericisback1/photo-1.jpg
January 26, 2014, 04:52:04 PM
Anyone here using RPi with Yellowjacket nanofury?
On bfgminer 3.10.0 (win7), Yellowjacket runs fine.
On RPi(Minepeon), I have compiled the 3.10.0, but it does not detect the 4 x Yellowjackets. cgminer detects and runs them, but I get failure after running for 30 minutes.
I am using a powered hub 5V 4A max output.
Are there additional switches or options that I need to include when compiling 3.10.0 in Arch Linux(I think Minepeon is running on top of Arch Linux)?
Would appreciate any help here.
Thanks.
In part of the configure output is a section showing enabled drivers. If the NFY is enabled then run bfgminer as sudo aka root. If that still does not work. A boot flag may need to be changed that forces USB 1.1On bfgminer 3.10.0 (win7), Yellowjacket runs fine.
On RPi(Minepeon), I have compiled the 3.10.0, but it does not detect the 4 x Yellowjackets. cgminer detects and runs them, but I get failure after running for 30 minutes.
I am using a powered hub 5V 4A max output.
Are there additional switches or options that I need to include when compiling 3.10.0 in Arch Linux(I think Minepeon is running on top of Arch Linux)?
Would appreciate any help here.
Thanks.
Well I did both but I get a shitload of errors
when using sudo i keep getting WITHOUT -S all flag the NFY start up without an hitch, but it doesn't start the usb erupters.
with the -S all flag I keep getting the mcp error and:
mcp2210_set_cfg_spi: Error setting current SPI config
[2014-01-26 21:48:55] NFY 0: bitfury_init_oldbuf: Giving up after 4 tries
[2014-01-26 21:48:55] NFY 0: bitfury_init_oldbuf: Giving up after 4 tries
[2014-01-26 21:48:56] NFY 0: bitfury_init_oldbuf: Giving up after 4 tries
and the NFYs go off kinda immediatly after that.
when adding the boot flag to usb 1.1 the PI crashes and reboots...
I got no issues under windows.
January 26, 2014, 04:13:12 PM
Anyone here using RPi with Yellowjacket nanofury?
On bfgminer 3.10.0 (win7), Yellowjacket runs fine.
On RPi(Minepeon), I have compiled the 3.10.0, but it does not detect the 4 x Yellowjackets. cgminer detects and runs them, but I get failure after running for 30 minutes.
I am using a powered hub 5V 4A max output.
Are there additional switches or options that I need to include when compiling 3.10.0 in Arch Linux(I think Minepeon is running on top of Arch Linux)?
Would appreciate any help here.
Thanks.
In part of the configure output is a section showing enabled drivers. If the NFY is enabled then run bfgminer as sudo aka root. If that still does not work. A boot flag may need to be changed that forces USB 1.1On bfgminer 3.10.0 (win7), Yellowjacket runs fine.
On RPi(Minepeon), I have compiled the 3.10.0, but it does not detect the 4 x Yellowjackets. cgminer detects and runs them, but I get failure after running for 30 minutes.
I am using a powered hub 5V 4A max output.
Are there additional switches or options that I need to include when compiling 3.10.0 in Arch Linux(I think Minepeon is running on top of Arch Linux)?
Would appreciate any help here.
Thanks.
Jump to: