OLD: BFGMiner 3.10.0: modular ASIC+FPGA, GBT+Strtm, RPC, Mac/Lnx/W64, AntU1, DRB - page 66.

Mudbankkeith

hero member

Activity: 868

Merit: 1000

Quote from: HiGer on January 12, 2014, 07:21:22 AM

Hi,

I am using this (https://www.dropbox.com/s/z29x4n6ng510joi/bfgminer-npw-antminer.7z) in Win7x64 with the parameter "--set-device antminer:freq=0981" It starts up ok, finds the antminer but reports that
"AMU 0: Applying rule antminer:freq=0981: Unknown option:freq" and then starts hashing at the standard speed. Why? Supposedly overclocking is working? Am I doing something wrong?

Full start parameter is "bfgminer.exe -S antminer:all -o pooladdress:port -u XXX -p XXX --set-device antminer:freq=0981"

In this form it is working for me.

bfgminer.exe --set-device antminer:freq=0981 -o http://stratum.bitcoin.cz:3333 -O miner:password -S antminer:all

Make sure you have the latest version of antminer.7z
I think there have been 3 now.

sikke

sr. member

Activity: 504

Merit: 250

Thank you for Antminer support and overcloking. Works nice for my work in progress miner box.. Might never ROI but it's fun to make. I plan to swap out all those old Erupters for Antminers total could be 130 miners. Also will swap those ATX power supplys for 5V 40A psu.

I bypassed the internal fuse for those 13slot USB hubs so they work nicely

52x Erupter
13x Antminer

HiGer

newbie

Activity: 6

Merit: 0

Hi,

I am using this (https://www.dropbox.com/s/z29x4n6ng510joi/bfgminer-npw-antminer.7z) in Win7x64 with the parameter "--set-device antminer:freq=0981" It starts up ok, finds the antminer but reports that
"AMU 0: Applying rule antminer:freq=0981: Unknown option:freq" and then starts hashing at the standard speed. Why? Supposedly overclocking is working? Am I doing something wrong?

Full start parameter is "bfgminer.exe -S antminer:all -o pooladdress:port -u XXX -p XXX --set-device antminer:freq=0981"

visdude

legendary

Activity: 1081

Merit: 1001

Quote from: stef942 on January 11, 2014, 10:42:30 AM

Hello,

im under Ubuntu,

using this :

Code:

git clone -b feature\/antminer-u1-support https://github.com/nwoolls/bfgminer.git bfgminer-npw
cd bfgminer-npw
./autogen.sh
./configure
make

and then

Code:

bfgminer -S antminer:all -S erupter:all

my 5 antminer are seen as BEE Huh

and mining at BEE speed Cry

How can i fix this please?

I don't do Ubuntu but in Windows, I usually isolate each type of USB miners, i.e. run the BEs first in one instance and after they are engaged, plug in the Furies (or Ants in this case) and run another instance of the appropriate BFGMiner. But then again, I don't know jack about Ubuntu.

stef942

full member

Activity: 181

Merit: 100

"no devices found" now... Huh

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: stef942 on January 11, 2014, 10:42:30 AM

Code:

bfgminer -S antminer:all -S erupter:all

my 5 antminer are seen as BEE Huh

and mining at BEE speed Cry

How can i fix this please?

Make sure you are running the version of bfgminer you just built:

Code:

./bfgminer -S antminer:all -S erupter:all

stef942

full member

Activity: 181

Merit: 100

Hello,

im under Ubuntu,

using this :

Code:

git clone -b feature\/antminer-u1-support https://github.com/nwoolls/bfgminer.git bfgminer-npw
cd bfgminer-npw
./autogen.sh
./configure
make

and then

Code:

bfgminer -S antminer:all -S erupter:all

my 5 antminer are seen as BEE Huh

and mining at BEE speed Cry

How can i fix this please?

darcimer

member

Activity: 66

Merit: 10

Quote from: ice56 on January 10, 2014, 07:29:28 AM

Quote from: Taugeran on January 10, 2014, 12:28:39 AM

Quote from: darcimer on January 09, 2014, 11:49:18 PM

Quote from: ice56 on January 09, 2014, 12:50:03 PM

Hello with https://www.dropbox.com/s/z29x4n6ng510joi/bfgminer-npw-antminer.7z, and
bfgminer -S antminer:all -S erupter:all, it goes with my erupter an antminer but my nanofurys no more go why?

with bfgminer3.9 and only -S erupter:all i see my nanofury and my erupters.

without zadig.

how my nanofury, erupters and antminers go on windows???

setup :

1* dlink 10 port usb hub -> 2 erupters and 2 nanofurys 3.5A power
1* delock 7 port hub -> 3 antminer 3.5A power
and individual an two differnt usb ports on my pc
so i have enough power i think.

Could someone please explain to me how to use the binaries? I downloaded them, but I have no idea what to do with them now that I have them. I am trying to run some U1's on an anker 9 port hub, and all I am getting is icarus..
Thanks!

~D

you need to use -S antminer:all in the command line

optionally if you wish to OC them a tad add --set-device antminer:freq=0981

this will set the clock to 250 MHz and produce ~2.0Gh/sec

view https://github.com/AntMiner/AntGen1/blob/master/manual/AntMiner-U1%20user%20guide.pdf
for a table of frequencies

ok step by step
1. i Downloadet https://www.dropbox.com/s/z29x4n6ng510joi/bfgminer-npw-antminer.7z,
2. extrakt
3. copy zlib1 (32bit) to extrakt folder
4. put Logindata in conf file
5. start with cmd file with this line: "bfgminer -S antminer:all -S erupter:all -S NFY:all"
6. bfgminer only found the 3 antminer and the 2 erupter, but my nanofurys not there and not found with Managment Devices.

WHY? because when i downloadet bfgminer 3.8 or 3.9 and start with "bfgminer -S all" or "bfgminer -S erupter:all" then my 2 nanofurys are in bfgminer and the 2 erupter too.
why not with this npw-antminer edition? is there compiled without nanofurys? but other post´s i read in this topic it goes at there

why i dont compile it myself? because i have probs with compiler in ./configure part
my compiler dont found "autoreconf" and i dont found solution atm.

I'm no expert, but maybe you forgot in the command line?? -S NFY:all

Beastlymac

hero member

Activity: 630

Merit: 501

Miner Setup And Reviews. WASP Rep.

Quote from: rmolby on January 10, 2014, 10:17:57 PM

Quote from: nwoolls on January 10, 2014, 02:20:44 PM

Quote from: rmolby on January 10, 2014, 10:24:00 AM

Someone correct me if I am wrong since I don't own a fury, but I think all you have to do is also add this to the command line

Code:

-S bigpic:all

and it will probe for the furys.

The bigpic driver is for Red Fury / Blue Fury - the BF1 devices. The nanofury driver is for Ice Fury and other NanoFury (NF1) based devices.

I stand corrected.

You want to use

Code:

-S NFY:all

For IceFury

rmolby

member

Activity: 75

Merit: 10

Quote from: nwoolls on January 10, 2014, 02:20:44 PM

Quote from: rmolby on January 10, 2014, 10:24:00 AM

Someone correct me if I am wrong since I don't own a fury, but I think all you have to do is also add this to the command line

Code:

-S bigpic:all

and it will probe for the furys.

The bigpic driver is for Red Fury / Blue Fury - the BF1 devices. The nanofury driver is for Ice Fury and other NanoFury (NF1) based devices.

I stand corrected.

semzor

newbie

Activity: 19

Merit: 0

can i find out what is the average difficulty (=>1) of shares that my miner finds for the time frame that bfgminer has run?

edit: well i guess it would be very close to 1 hehe

Taugeran

hero member

Activity: 658

Merit: 500

CCNA: There i fixed the internet.

running 2NFY, 1BPM (pen modded), 2 KLN, 1 BES(more to be put back online)

krodmandoon

full member

Activity: 434

Merit: 105

So if I set my pool, worker info and --disable-gpu -S all. This will detect all USB miners?

darcimer

member

Activity: 66

Merit: 10

Quote from: AbiTxGroup on January 10, 2014, 12:54:32 AM

Quote from: darcimer on January 10, 2014, 12:34:46 AM

I think you are a couple steps ahead of me. The binaries are in a .7z file, and I can't open it. I think once I can run it, I will be able to enter the right commands. I'm using XP.

Try 7-zip portable

http://portableapps.com/apps/utilities/7-zip_portable

or....

the full version at http://www.7-zip.org/

Thank you!

chadgroover

newbie

Activity: 42

Merit: 0

Working perfectly with 5x U1 on Windows 7 x64

Makes such a welcome change to not have to piss about with unplugging all but 1 device before you can start cgminer!

Taugeran

hero member

Activity: 658

Merit: 500

CCNA: There i fixed the internet.

Quote from: Luke-Jr on January 10, 2014, 02:39:12 PM

Quote from: Taugeran on January 10, 2014, 02:34:10 PM

Also. What software driver is needed to comm with the Klondike series. Receiving 2 later today

Klondike is a direct USB device, so use Zadig for it.

So Lib USB is all I need on a BBB. And -S kln:/path/to/Klondike ?

Normally I could figure it out but I'm sleep deprived, etc. the usual

Luke-Jr

legendary

Activity: 2576

Merit: 1186

Quote from: Taugeran on January 10, 2014, 02:34:10 PM

Also. What software driver is needed to comm with the Klondike series. Receiving 2 later today

Klondike is a direct USB device, so use Zadig for it.

Taugeran

hero member

Activity: 658

Merit: 500

CCNA: There i fixed the internet.

Also. What software driver is needed to comm with the Klondike series. Receiving 2 later today

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: rmolby on January 10, 2014, 10:24:00 AM

Someone correct me if I am wrong since I don't own a fury, but I think all you have to do is also add this to the command line

Code:

-S bigpic:all

and it will probe for the furys.

The bigpic driver is for Red Fury / Blue Fury - the BF1 devices. The nanofury driver is for Ice Fury and other NanoFury (NF1) based devices.

HellDiverUK

hero member

Activity: 1246

Merit: 501

Yeah, reading on down the ASIC.README I saw that. I'll update when I try.

Topic: OLD: BFGMiner 3.10.0: modular ASIC+FPGA, GBT+Strtm, RPC, Mac/Lnx/W64, AntU1, DRB - page 66. (Read 1193208 times)