OLD: BFGMiner 3.10.0: modular ASIC+FPGA, GBT+Strtm, RPC, Mac/Lnx/W64, AntU1, DRB - page 67.

Taugeran

hero member

Activity: 658

Merit: 500

CCNA: There i fixed the internet.

Quote from: Luke-Jr on January 10, 2014, 10:59:20 AM

Quote from: HellDiverUK on January 10, 2014, 04:35:42 AM

Quote from: HellDiverUK on January 09, 2014, 05:27:36 AM

Just picked up a Bitburner Fury - how is bfg's support for these things?

Also got a Bitburner XX (Avalon chips). Again, I assume bfg supports these things?

Not sure why you assume that.
Bitburner still hasn't provided and docs, sample units, code, or even communicated.

I believe they emulate Avalon units with the mcu. So -S Ava:/path/to/bitburner may work

I might try adjusting the --Avalon-options to follow the bit burner formula.

And looking at cg's driver, btb is a sub driver

HellDiverUK

hero member

Activity: 1246

Merit: 501

Still having issues getting the Nanofurys to work on nwooll's version of bfg. Running it on Debian, hidapi is installed correctly as far as I can tell (no warning or errors when setting up bfg).

Any ideas?

HellDiverUK

hero member

Activity: 1246

Merit: 501

Quote from: Luke-Jr on January 10, 2014, 10:59:20 AM

Quote from: HellDiverUK on January 10, 2014, 04:35:42 AM

Quote from: HellDiverUK on January 09, 2014, 05:27:36 AM

Just picked up a Bitburner Fury - how is bfg's support for these things?

Also got a Bitburner XX (Avalon chips). Again, I assume bfg supports these things?

Not sure why you assume that.
Bitburner still hasn't provided and docs, sample units, code, or even communicated.

I assumed it did because most devs are fothcoming with stuff like that. Or they worked similarly to some other device, I don't know. That's kind of why I asked.

Fair enough, looks like cgminer it is then. Sad

Edit: From cgminer's readme file:

Code:

All current BitBurner devices (BitBurner X, BitBurner XX and BitBurner Fury)
emulate Avalon devices, whether or not they use Avalon chips.

So, is there a chance bfg will work? I guess I'll just have to try it when the boards arrive.

Luke-Jr

legendary

Activity: 2576

Merit: 1186

Quote from: HellDiverUK on January 10, 2014, 04:35:42 AM

Quote from: HellDiverUK on January 09, 2014, 05:27:36 AM

Just picked up a Bitburner Fury - how is bfg's support for these things?

Also got a Bitburner XX (Avalon chips). Again, I assume bfg supports these things?

Not sure why you assume that.
Bitburner still hasn't provided and docs, sample units, code, or even communicated.

rmolby

member

Activity: 75

Merit: 10

Quote from: ice56 on January 10, 2014, 07:29:28 AM

Quote from: Taugeran on January 10, 2014, 12:28:39 AM

Quote from: darcimer on January 09, 2014, 11:49:18 PM

Quote from: ice56 on January 09, 2014, 12:50:03 PM

Hello with https://www.dropbox.com/s/z29x4n6ng510joi/bfgminer-npw-antminer.7z, and
bfgminer -S antminer:all -S erupter:all, it goes with my erupter an antminer but my nanofurys no more go why?

with bfgminer3.9 and only -S erupter:all i see my nanofury and my erupters.

without zadig.

how my nanofury, erupters and antminers go on windows???

setup :

1* dlink 10 port usb hub -> 2 erupters and 2 nanofurys 3.5A power
1* delock 7 port hub -> 3 antminer 3.5A power
and individual an two differnt usb ports on my pc
so i have enough power i think.

Could someone please explain to me how to use the binaries? I downloaded them, but I have no idea what to do with them now that I have them. I am trying to run some U1's on an anker 9 port hub, and all I am getting is icarus..
Thanks!

~D

you need to use -S antminer:all in the command line

optionally if you wish to OC them a tad add --set-device antminer:freq=0981

this will set the clock to 250 MHz and produce ~2.0Gh/sec

view https://github.com/AntMiner/AntGen1/blob/master/manual/AntMiner-U1%20user%20guide.pdf
for a table of frequencies

ok step by step
1. i Downloadet https://www.dropbox.com/s/z29x4n6ng510joi/bfgminer-npw-antminer.7z,
2. extrakt
3. copy zlib1 (32bit) to extrakt folder
4. put Logindata in conf file
5. start with cmd file with this line: "bfgminer -S antminer:all -S erupter:all"
6. bfgminer only found the 3 antminer and the 2 erupter, but my nanofurys not there and not found with Managment Devices.

WHY? because when i downloadet bfgminer 3.8 or 3.9 and start with "bfgminer -S all" or "bfgminer -S erupter:all" then my 2 nanofurys are in bfgminer and the 2 erupter too.
why not with this npw-antminer edition? is there compiled without nanofurys? but other post´s i read in this topic it goes at there

why i dont compile it myself? because i have probs with compiler in ./configure part
my compiler dont found "autoreconf" and i dont found solution atm.

Someone correct me if I am wrong since I don't own a fury, but I think all you have to do is also add this to the command line

Code:

-S bigpic:all

and it will probe for the furys.

ice56

newbie

Activity: 11

Merit: 0

Quote from: Taugeran on January 10, 2014, 12:28:39 AM

Quote from: darcimer on January 09, 2014, 11:49:18 PM

Quote from: ice56 on January 09, 2014, 12:50:03 PM

Hello with https://www.dropbox.com/s/z29x4n6ng510joi/bfgminer-npw-antminer.7z, and
bfgminer -S antminer:all -S erupter:all, it goes with my erupter an antminer but my nanofurys no more go why?

with bfgminer3.9 and only -S erupter:all i see my nanofury and my erupters.

without zadig.

how my nanofury, erupters and antminers go on windows???

setup :

1* dlink 10 port usb hub -> 2 erupters and 2 nanofurys 3.5A power
1* delock 7 port hub -> 3 antminer 3.5A power
and individual an two differnt usb ports on my pc
so i have enough power i think.

Could someone please explain to me how to use the binaries? I downloaded them, but I have no idea what to do with them now that I have them. I am trying to run some U1's on an anker 9 port hub, and all I am getting is icarus..
Thanks!

~D

you need to use -S antminer:all in the command line

optionally if you wish to OC them a tad add --set-device antminer:freq=0981

this will set the clock to 250 MHz and produce ~2.0Gh/sec

view https://github.com/AntMiner/AntGen1/blob/master/manual/AntMiner-U1%20user%20guide.pdf
for a table of frequencies

ok step by step
1. i Downloadet https://www.dropbox.com/s/z29x4n6ng510joi/bfgminer-npw-antminer.7z,
2. extrakt
3. copy zlib1 (32bit) to extrakt folder
4. put Logindata in conf file
5. start with cmd file with this line: "bfgminer -S antminer:all -S erupter:all"
6. bfgminer only found the 3 antminer and the 2 erupter, but my nanofurys not there and not found with Managment Devices.

WHY? because when i downloadet bfgminer 3.8 or 3.9 and start with "bfgminer -S all" or "bfgminer -S erupter:all" then my 2 nanofurys are in bfgminer and the 2 erupter too.
why not with this npw-antminer edition? is there compiled without nanofurys? but other post´s i read in this topic it goes at there

why i dont compile it myself? because i have probs with compiler in ./configure part
my compiler dont found "autoreconf" and i dont found solution atm.

HellDiverUK

hero member

Activity: 1246

Merit: 501

Quote from: HellDiverUK on January 09, 2014, 05:27:36 AM

Just picked up a Bitburner Fury - how is bfg's support for these things?

Also got a Bitburner XX (Avalon chips). Again, I assume bfg supports these things?

asjfdlksfd

full member

Activity: 128

Merit: 100

I didn't found my last post of my request. So may I ask again for a little Chilly extension:

Can we have a ZlX (with lowercase) extension or an us of ZcX instead ZGX in the "M" menu to see also all the ASIC temperatures at runtime?. Generally the Identify command is not working. Maybe it can be used more for detailed informations:

Select processor to manage using up/down arrow keys
BFL 1 : 29.0C | OFF /27.72/26.45Gh/s | A: 1069 R: 9+ 0(.83%) HW: 21574/3.8% BitFORCE SHA256 SC from MrTeal and ChipGeek Serial: FTWZA0ON Kernel: bulk queue Temperatures: 29.0C 27.0C Voltages: 3.290 / 1.161 / 12.187

[E]nable dentify [F]an control
[Slash] Find processor [Plus] Add device(s) [Enter] Close device manager

Here generally I want to get all the temperatures from ZlX command also in the Devices menu (M):
PROCESSOR 0: 36.25 C PROCESSOR 1: 31.00 C PROCESSOR 2: 38.00 C PROCESSOR 3: 33.25 C PROCESSOR 4: 35.00 C PROCESSOR 5: 33.75 C PROCESSOR 6: 34.00 C PROCESSOR 7: 31.75 C
Or use ZcX instead of ZCX to add temperatures to the Chip lines for less precision for a first implementation
DEVICE: Chili SC MANUFACTURER: MrTeal and ChipGeek FIRMWARE: 1.2.14e CHIP PARALLELIZATION: NO QUEUE DEPTH:40 PROCESSOR 0: 12 engines @ 339 MHz -- MAP: FFE1 37 C PROCESSOR 1: 8 engines @ 323 MHz -- MAP: 0FF0 32 C PROCESSOR 2: 16 engines @ 356 MHz -- MAP: FFFF 39 C PROCESSOR 3: 9 engines @ 314 MHz -- MAP: 07FA 34 C PROCESSOR 4: 16 engines @ 297 MHz -- MAP: FFFF 36 C PROCESSOR 5: 7 engines @ 257 MHz -- MAP: 807B 34 C PROCESSOR 6: 13 engines @ 330 MHz -- MAP: FFE3 35 C PROCESSOR 7: 8 engines @ 307 MHz -- MAP: 0FF0 32 C THEORETICAL MAX: 28.46 GH/s ENGINES: 89 FREQUENCY: 319 MHz CRITICAL TEMPERATURE: 0 TOTAL THERMAL CYCLES: 0 XLINK MODE: MASTER XLINK PRESENT: NO OK

Codemeister

full member

Activity: 131

Merit: 100

Hobby Miner

Is the overclock limited to 2 GH/s?

AbiTxGroup

sr. member

Activity: 447

Merit: 250

Quote from: darcimer on January 10, 2014, 12:34:46 AM

I think you are a couple steps ahead of me. The binaries are in a .7z file, and I can't open it. I think once I can run it, I will be able to enter the right commands. I'm using XP.

Try 7-zip portable

http://portableapps.com/apps/utilities/7-zip_portable

or....

the full version at http://www.7-zip.org/

darcimer

member

Activity: 66

Merit: 10

Quote from: Taugeran on January 10, 2014, 12:28:39 AM

Quote from: darcimer on January 09, 2014, 11:49:18 PM

Quote from: ice56 on January 09, 2014, 12:50:03 PM

Hello with https://www.dropbox.com/s/z29x4n6ng510joi/bfgminer-npw-antminer.7z, and
bfgminer -S antminer:all -S erupter:all, it goes with my erupter an antminer but my nanofurys no more go why?

with bfgminer3.9 and only -S erupter:all i see my nanofury and my erupters.

without zadig.

how my nanofury, erupters and antminers go on windows???

setup :

1* dlink 10 port usb hub -> 2 erupters and 2 nanofurys 3.5A power
1* delock 7 port hub -> 3 antminer 3.5A power
and individual an two differnt usb ports on my pc
so i have enough power i think.

Could someone please explain to me how to use the binaries? I downloaded them, but I have no idea what to do with them now that I have them. I am trying to run some U1's on an anker 9 port hub, and all I am getting is icarus..
Thanks!

~D

you need to use -S antminer:all in the command line

optionally if you wish to OC them a tad add --set-device antminer:freq=0981

this will set the clock to 250 MHz and produce ~2.0Gh/sec

view https://github.com/AntMiner/AntGen1/blob/master/manual/AntMiner-U1%20user%20guide.pdf
for a table of frequencies

I think you are a couple steps ahead of me. The binaries are in a .7z file, and I can't open it. I think once I can run it, I will be able to enter the right commands. I'm using XP.

Taugeran

hero member

Activity: 658

Merit: 500

CCNA: There i fixed the internet.

Quote from: darcimer on January 09, 2014, 11:49:18 PM

Quote from: ice56 on January 09, 2014, 12:50:03 PM

Hello with https://www.dropbox.com/s/z29x4n6ng510joi/bfgminer-npw-antminer.7z, and
bfgminer -S antminer:all -S erupter:all, it goes with my erupter an antminer but my nanofurys no more go why?

with bfgminer3.9 and only -S erupter:all i see my nanofury and my erupters.

without zadig.

how my nanofury, erupters and antminers go on windows???

setup :

1* dlink 10 port usb hub -> 2 erupters and 2 nanofurys 3.5A power
1* delock 7 port hub -> 3 antminer 3.5A power
and individual an two differnt usb ports on my pc
so i have enough power i think.

Could someone please explain to me how to use the binaries? I downloaded them, but I have no idea what to do with them now that I have them. I am trying to run some U1's on an anker 9 port hub, and all I am getting is icarus..
Thanks!

~D

you need to use -S antminer:all in the command line

optionally if you wish to OC them a tad add --set-device antminer:freq=0981

this will set the clock to 250 MHz and produce ~2.0Gh/sec

view https://github.com/AntMiner/AntGen1/blob/master/manual/AntMiner-U1%20user%20guide.pdf
for a table of frequencies

darcimer

member

Activity: 66

Merit: 10

Quote from: ice56 on January 09, 2014, 12:50:03 PM

Hello with https://www.dropbox.com/s/z29x4n6ng510joi/bfgminer-npw-antminer.7z, and
bfgminer -S antminer:all -S erupter:all, it goes with my erupter an antminer but my nanofurys no more go why?

with bfgminer3.9 and only -S erupter:all i see my nanofury and my erupters.

without zadig.

how my nanofury, erupters and antminers go on windows???

setup :

1* dlink 10 port usb hub -> 2 erupters and 2 nanofurys 3.5A power
1* delock 7 port hub -> 3 antminer 3.5A power
and individual an two differnt usb ports on my pc
so i have enough power i think.

Could someone please explain to me how to use the binaries? I downloaded them, but I have no idea what to do with them now that I have them. I am trying to run some U1's on an anker 9 port hub, and all I am getting is icarus..
Thanks!

~D

Juzz

newbie

Activity: 3

Merit: 0

Quote from: jedimstr on January 09, 2014, 12:57:41 PM

Quote from: Juzz on January 09, 2014, 10:30:30 AM

...snip...

I get segmentation fault when trying to launch that bfgminer - I am on an Ubuntu x86 latest version, I've compiled hidapi myself since there wasn't any in the repositories...

Try running bfgminer under sudo permissions.

That seg faults as well, but now the prompts are no longer on separate lines (when pressing enter).

AHA!
I just renamed my bfgminer.conf and now it starts up!

Question_is

newbie

Activity: 4

Merit: 0

Quote from: Question_is on January 07, 2014, 08:26:58 PM

BFGMiner : https://github.com/luke-jr/bfgminer
Where should I work to modify the sha256_nonce find code for CPU-64bit or GPU ?

I know that CPU and GPU mining is looked as: overcome by FPGA and Asics, but I want to
do that; in spite of all the odds.

I want to write my code for CPU-64bit or GPU mining, but I see that,
"sha256" and "nonce" are in all the following files below.
They are quite a lot. Probably there are files, with code for
different architectures.

Can someone suggest me the files that I have to work in ?

Thankyou anyway

------These files have "sha2" as text inside-------------
/driver-cpu.h
/sha2.c
/sha2.h
/libblkmaker/base58.c
/libblkmaker/private.h
/x86_32/Makefile.am
/x86_32/Makefile.in
/x86_32/sha256_xmm.asm
/x86_64/Makefile.am
/x86_64/Makefile.in
/x86_64/sha256_xmm_amd64.asm

-----These files have both "sha2" and "nonce" as text inside----------
/api.c
/diablo130302.cl

/driver-cpu.c

/findnonce.c
/Makefile.am
/Makefile.in
/miner.c
/miner.h
/scrypt130511.cl
/scrypt.c
/sha256_4way.c

/sha256_cryptopp.c
/sha256_generic.c
/sha256_sse2_amd64.c
/sha256_sse2_i386.c
/sha256_sse4_amd64.c

/util.c
/libblkmaker/blkmaker.c
/libblkmaker/blkmaker.h
/libblkmaker/example.c
/x86_64/sha256_sse4_amd64.asm

--------------------------------------------

I gave a quick look inside these files, and
I think I can take out from the list the following:

/sha256_altivec_4way.c
http://en.wikipedia.org/wiki/AltiVec

/sha256_via.c
http://www.via.com.tw/en/initiatives...at_and_how.jsp

/driver-bitforce.c
https://en.bitcoin.it/wiki/Mining_hardware_comparison

/driver-ztex.c
http://www.ztex.de

Can someone help me a bit more ?

Thankyou in advance

twib2

sr. member

Activity: 280

Merit: 250

Helperizer

Quote from: twib2 on January 09, 2014, 12:03:34 PM

Quote from: nwoolls on January 09, 2014, 02:18:58 AM

Quote from: twib2 on January 08, 2014, 10:18:21 PM

Thanks, that's what I would have thought, but it still didn't show with the "--help" switch. *shrug*

Sorry that's my bad. It doesn't show in --help or ./configure unfortunately. If you see the .o file compiled though you are good to go.

I had thought as much, and I did get the driver-antminer.o file made, BUT no joy on bfgminer recognizing my ants, using "-S antminer:all" or manually looking with M+ antminer:all during operation when it's telling me no devices found. As far as I can tell, no errors during the compile. I even tried with a fresh git clone and antminer feature, and of course did the autogen, configure, make steps. I do use "strip" - could that be the problem (never has before, but you never know...)?

Bump since I think this was missed at the bottom of the page - nwoolls, anyone?

I just can't get it to recognize the ANTs even with all the above and with no compiler errors, with the *.rules set up, and even running as root.

chiefstank

member

Activity: 81

Merit: 10

Quote from: JakeTri on January 09, 2014, 06:56:11 PM

Quote from: chiefstank on January 09, 2014, 06:32:24 PM

again, forgive my ignorance. but i want to set multiple device settings on the conf file but only one is getting loaded.

"set-device":["NFY:osc6_bits=53"],
"set-device":["antminer:freq=0981"]

how exactly should this be configured in the conf file?

thanks in advance. you all are great! Cheesy

Try

"set-device":["NFY:osc6_bits=53", "antminer:freq=0981"]

ahh, got it. didn't know how they would be separated. once again, this thread rules.

works like a charm! Cheesy

JakeTri

full member

Activity: 154

Merit: 100

Quote from: chiefstank on January 09, 2014, 06:32:24 PM

again, forgive my ignorance. but i want to set multiple device settings on the conf file but only one is getting loaded.

"set-device":["NFY:osc6_bits=53"],
"set-device":["antminer:freq=0981"]

how exactly should this be configured in the conf file?

thanks in advance. you all are great! Cheesy

Try

"set-device":["NFY:osc6_bits=53", "antminer:freq=0981"]

trojanguys

newbie

Activity: 24

Merit: 0

Please anyone help me understand how to use bfgminer with ant miner, i am a new to all of this and have had no success
Huh

chiefstank

member

Activity: 81

Merit: 10

again, forgive my ignorance. but i want to set multiple device settings on the conf file but only one is getting loaded.

"set-device":["NFY:osc6_bits=53"],
"set-device":["antminer:freq=0981"]

how exactly should this be configured in the conf file?

thanks in advance. you all are great! Cheesy

Topic: OLD: BFGMiner 3.10.0: modular ASIC+FPGA, GBT+Strtm, RPC, Mac/Lnx/W64, AntU1, DRB - page 67. (Read 1193208 times)