what could it be?
If I'm not mistaken, Navi is not yet supported.I assumed so, I wanted to get a different opinion. Thanks
Topic: Open Source XPM (Primecoin) GPU Miner & Pool xpmforall.org - page 5. (Read 110156 times)
I assumed so, I wanted to get a different opinion. Thanks
what could it be?
If I'm not mistaken, Navi is not yet supported. Who has these cards? Sapphire Radeon RX 5500XT PULSE 8192Mb
W10 64
By installing the drivers - Adrenalin 2020 Edition 19.12.2 Recommended (WHQL)
When you start the miner (10.2, 10.3,10.5), it simply closes with the loss of the video adapter.
Ask for help
W10 64
By installing the drivers - Adrenalin 2020 Edition 19.12.2 Recommended (WHQL)
When you start the miner (10.2, 10.3,10.5), it simply closes with the loss of the video adapter.
Ask for help
start xpmclient from cmd and see what is wrong
when you run this is what gives
date time ( uptime ) v|
2019-12-26 13:09:37.345 ( 0.001s) INFO| Logging to 'miner-2019-12-26.log', mode: 'a', verbosity: 0
2019-12-26 13:09:37.360 ( 0.016s) INFO| xpmclient-10.3
2019-12-26 13:09:37.371 ( 0.027s) INFO| ClientName = ClientID = InstanceID =
2019-12-26 13:09:37.374 ( 0.030s) INFO| Address = ''
2019-12-26 13:09:37.970 ( 0.626s) INFO| found platform[0] name = 'AMD Accelerated Parallel Processing'
2019-12-26 13:09:37.973 ( 0.629s) INFO| found 1 devices
2019-12-26 13:09:37.975 ( 0.630s) INFO| Using device 0 as GPU 0
2019-12-26 13:09:38.041 ( 0.697s) INFO| compiling gfx1012_sha256.bin ...
2019-12-26 13:09:44.864 ( 7.520s) INFO| compiling gfx1012_sieve.bin ...
2019-12-26 13:09:49.296 ( 11.952s) INFO| compiling gfx1012_sieve_utils.bin ...
2019-12-26 13:09:50.401 ( 13.057s) INFO| compiling gfx1012_Fermat.bin ...
2019-12-26 13:09:59.171 ( 21.827s) INFO| compiling gfx1012_Fermat_utils.bin ...
2019-12-26 13:10:02.831 ( 25.487s) INFO| prepare_adl success
2019-12-26 13:10:02.833 ( 25.489s) INFO| GPU 0 iAdapterIndex 0 strUDID PCI_VEN_1002&DEV_7340&SUBSYS_E4211DA2&REV_C5_6&2D99A9EE&0&00000008A iBusNumber 3 iDeviceNumber 0 iFunctionNumber 0 iVendorID 1002 strAdapterName Radeon RX 5500 XT
2019-12-26 13:10:02.839 ( 25.494s) INFO| GPU 0 Radeon RX 5500 XT hardware monitoring enabled
2019-12-26 13:10:02.841 ( 25.497s) ERR| Failed to ADL_Overdrive5_ODParameters_Get
2019-12-26 13:10:02.843 ( 25.499s) ERR| Failed to ADL_Overdrive5_ODPerformanceLevels_Get
2019-12-26 13:10:02.845 ( 25.501s) ERR| Failed to ADL_Overdrive5_FanSpeedInfo_Get
2019-12-26 13:10:02.847 ( 25.503s) ERR| Failed to ADL_Overdrive5_PowerControl_get
2019-12-26 13:10:02.849 ( 25.505s) INFO| set_powertune(0, 20) failed
2019-12-26 13:10:02.879 ( 25.535s) INFO| N=12 SIZE=8192 STRIPES=480 WIDTH=20 PCOUNT=36864 TARGET=10
2019-12-26 13:10:02.882 ( 25.538s) INFO| GPU 0: has 11 CUs
2019-12-26 13:10:02.997 ( 25.653s) INFO| GPU 0: primorial = 13082761331670030 (54 bits)
2019-12-26 13:10:02.999 ( 25.655s) INFO| GPU 0: sieve size = 125829120 (27 bits)
2019-12-26 13:10:03.283 ( 25.939s) INFO| Connecting to frontend: coinsforall.io:6666 ...
2019-12-26 13:10:03.708 ( 26.364s) INFO| Connecting to bitcoin: 151.80.96.105:60000 ...
2019-12-26 13:10:03.717 ( 26.373s) INFO| Connecting to signals: 151.80.96.105:60001 ...
2019-12-26 13:10:04.801 ( 27.457s) INFO| Work received: height=3489864 diff=10.964632
2019-12-26 13:10:04.811 ( 27.467s) WARN| ran out of hashes, increasing sha256 work size coefficient to 65536
2019-12-26 13:10:06.617 ( 29.273s) INFO| Work received: height=3489865 diff=10.964635
what could it be? I run the miner with the standard settings
What will we use our capacities for?
For heating a house 
despite the noise it is not a bad idea
Who has these cards? Sapphire Radeon RX 5500XT PULSE 8192Mb
W10 64
By installing the drivers - Adrenalin 2020 Edition 19.12.2 Recommended (WHQL)
When you start the miner (10.2, 10.3,10.5), it simply closes with the loss of the video adapter.
Ask for help
W10 64
By installing the drivers - Adrenalin 2020 Edition 19.12.2 Recommended (WHQL)
When you start the miner (10.2, 10.3,10.5), it simply closes with the loss of the video adapter.
Ask for help
start xpmclient from cmd and see what is wrong
Who has these cards? Sapphire Radeon RX 5500XT PULSE 8192Mb
W10 64
By installing the drivers - Adrenalin 2020 Edition 19.12.2 Recommended (WHQL)
When you start the miner (10.2, 10.3,10.5), it simply closes with the loss of the video adapter.
Ask for help
W10 64
By installing the drivers - Adrenalin 2020 Edition 19.12.2 Recommended (WHQL)
When you start the miner (10.2, 10.3,10.5), it simply closes with the loss of the video adapter.
Ask for help
some bot asshole did not rebuild? or simply because the moron lowers the price? green - sale. red - purchase.
Oh my god ... where do they come from?
What will we use our capacities for?
For heating a house
What will we use our capacities for?
so ... xpm from polo will be remove sun & we dont have any serious exchange for him...does xpm will be dead & we are XXX with him?
get rid of 0.000004 per poloniex. just don’t go to other exchanges.
so ... xpm from polo will be remove sun & we dont have any serious exchange for him...does xpm will be dead & we are XXX with him?
If you dig ETH, the RX560 is half of the RX570, and the RX550 is half of the RX560.
Ok, thanks!
So about ~6cpd for rx560 and ~3cdp for rx 550 at current state.
If you dig ETH, the RX560 is half of the RX570, and the RX550 is half of the RX560.
Why there is a problem with rx 570/80 card's when you add more than 2 per rig. Some of the cards crash after a little while.
Can I add special command to miner when 1 or more gpu's crash miner restarts?
I don't have the same problem with other rigs gtx 1070/p106 and old tahiti cards.
Can I add special command to miner when 1 or more gpu's crash miner restarts?
I don't have the same problem with other rigs gtx 1070/p106 and old tahiti cards.
Parameter setting join
# GPU crash handling
# Enter OS terminal command here
# for example:
# onCrash = "shutdown -r 1"
onCrash = "taskkill /f /im xpmclient.exe";
As long as the GPU crashes, it will force xpmclient.exe to be closed.
But restarting xpmclient.exe requires another batch file.
-------------------------------------------
:1
TIMEOUT 10
tasklist | find /i "xpmclient.exe" || echo %date% %time% XPM START >> log.txt && start xpmclient
goto 1
-------------------------------------------
Copy the text inside the dotted line to a new text file, and modify the extension file name to .bat and put the same path into xpmclient.exe
In the future, as long as the new batch file is executed, the GPU crash can be forced to close the software, and then xpmclient.exe is automatically restarted.
Thank you!
Have anyone tried mining this with Rx 550/560 series? How many cpd?
Why there is a problem with rx 570/80 card's when you add more than 2 per rig. Some of the cards crash after a little while.
Can I add special command to miner when 1 or more gpu's crash miner restarts?
I don't have the same problem with other rigs gtx 1070/p106 and old tahiti cards.
Can I add special command to miner when 1 or more gpu's crash miner restarts?
I don't have the same problem with other rigs gtx 1070/p106 and old tahiti cards.
Parameter setting join
# GPU crash handling
# Enter OS terminal command here
# for example:
# onCrash = "shutdown -r 1"
onCrash = "taskkill /f /im xpmclient.exe";
As long as the GPU crashes, it will force xpmclient.exe to be closed.
But restarting xpmclient.exe requires another batch file.
-------------------------------------------
:1
TIMEOUT 10
tasklist | find /i "xpmclient.exe" || echo %date% %time% XPM START >> log.txt && start xpmclient
goto 1
-------------------------------------------
Copy the text inside the dotted line to a new text file, and modify the extension file name to .bat and put the same path into xpmclient.exe
In the future, as long as the new batch file is executed, the GPU crash can be forced to close the software, and then xpmclient.exe is automatically restarted.
Why there is a problem with rx 570/80 card's when you add more than 2 per rig. Some of the cards crash after a little while.
Can I add special command to miner when 1 or more gpu's crash miner restarts?
I don't have the same problem with other rigs gtx 1070/p106 and old tahiti cards.
Can I add special command to miner when 1 or more gpu's crash miner restarts?
I don't have the same problem with other rigs gtx 1070/p106 and old tahiti cards.
0.00000666 and celebrate.
Mining and latest client version works fine.
The only problem is markets/exchanges - as always for Primecoin... Is offline for deposits and trading at the moment... :/
https://imgur.com/6AL4jrl
The only problem is markets/exchanges - as always for Primecoin... Is offline for deposits and trading at the moment... :/
https://imgur.com/6AL4jrl
Hi!
The second day of XPM is mined two times lower than usual (xpmforall.org)... Is it just me?
And it’s not clear how to contact the admin...
The second day of XPM is mined two times lower than usual (xpmforall.org)... Is it just me?
And it’s not clear how to contact the admin...
There is currently no such situation and the difficulty is reduced again. CPD's computing power has increased by 27 times, From 11.05 CPD up to 318 CPD,and daily rewards have increased from 96 XPM to 108 to 113.
I recommend that you check if the parameters or overclocking parameters are stable.
If the mining is unstable, it is often less than an hour to display the card error, and the profit is naturally declining.
No, equipping works stably, the parameters have not changed. The speed is the same. Errors are rare. And in the wallet, coins fall half as much ...
Maybe it’s worth changing the difficulty in the settings from 11 to 10?
The version window of xpmclient-opencl-10.5-beta1-win64 has the time to display the current continuous operation, at least 172800 sec, that is, no abnormality in gpu for 2 days.
Jump to: