Open Source XPM (Primecoin) GPU Miner & Pool xpmforall.org - page 6.

a7269118

newbie

Activity: 14

Merit: 0

Quote from: [email protected] on October 04, 2019, 04:47:43 PM

Hi!

The second day of XPM is mined two times lower than usual (xpmforall.org)... Is it just me?
And it’s not clear how to contact the admin...

There is currently no such situation and the difficulty is reduced again. CPD's computing power has increased by 27 times, From 11.05 CPD up to 318 CPD,and daily rewards have increased from 96 XPM to 108 to 113.
I recommend that you check if the parameters or overclocking parameters are stable.
If the mining is unstable, it is often less than an hour to display the card error, and the profit is naturally declining.

[email protected]

newbie

Activity: 2

Merit: 0

Hi!

The second day of XPM is mined two times lower than usual (xpmforall.org)... Is it just me?
And it’s not clear how to contact the admin...

buny

full member

Activity: 237

Merit: 100

Quote from: suona on September 11, 2019, 02:07:58 AM

Unfortunately it is very difficult to exchange primecoin sometimes...
Most of exchangers don't support it, those few that support it sometimes may have weeks of very low activity for this coin.

there is such a coin - scudo maltese. Grin

is about the same as primecoin.

you need to rename primecoin to eXtremalikcoin. so as not to mislead anyone.

suona

newbie

Activity: 10

Merit: 0

Unfortunately it is very difficult to exchange primecoin sometimes...
Most of exchangers don't support it, those few that support it sometimes may have weeks of very low activity for this coin.

https://i.imgur.com/RyKp2s3.png
https://i.ibb.co/MBpjGVX/xpm-exchange-problem.png

Juniormkl

newbie

Activity: 155

Merit: 0

The nvidia miner isnt working using RTX 2080, when i start the miner it give me this error: error: 701
failed with error CUDA_ERROR_LAUNCH_OUT_OF_RESOURCES at /home/user/build/xpmclient/src/xpm/cuda/xpmclient.cpp:598

buny

full member

Activity: 237

Merit: 100

Apparently eXtremal own ass increases complexity. Grin

batko

full member

Activity: 169

Merit: 100

125w

partyman

newbie

Activity: 14

Merit: 0

Quote from: batko on August 04, 2019, 03:11:51 PM

default config, only change ASM

how much power use 480 nitro+

Hyp0crit

newbie

Activity: 108

Merit: 0

Quote from: SLasVegas on August 04, 2019, 04:01:54 PM

Hello. I just started mining on the site xpmforall today.

I downloaded the AMD miner.

I altered the config file to put my desktop wallet address in the file.
I also just named my GPU what I wanted.

It's been over 20 minutes now. Everytime I enter my wallet address in the site,
and hit submit, it's not showing me any statistics for my mining.
I am finding valid shares on the mining window.
It says I'm doing about .34 to .36 chains per day on the mining window.

How long does it take for my stats to start showing up on the site??

Thanks for info.

Check your config file and wallet address at web. Check there is no any extra spaces etc.
It takes less than minute to see stats over website (xpmforall)

a7269118

newbie

Activity: 14

Merit: 0

Quote from: batko on August 04, 2019, 03:11:51 PM

default config, only change ASM

I have several RX580 brands, but I have changed the BIOS to dig ETH, so if I dig XPM, there is a close core frequency, and there are some differences in micro-computing power. I think this is caused by the modification of the label and BIOS. For 0.49 CPD, the lowest is 0.43 CPD, which is under the asm mode.

cirlama

jr. member

Activity: 156

Merit: 1

I think it's quite fast to get the stats on http://coinsforall.io (http://xpmforall.org/ is there for the calculator only)

SLasVegas

newbie

Activity: 45

Merit: 0

Hello. I just started mining on the site xpmforall today.

I downloaded the AMD miner.

I altered the config file to put my desktop wallet address in the file.
I also just named my GPU what I wanted.

It's been over 20 minutes now. Everytime I enter my wallet address in the site,
and hit submit, it's not showing me any statistics for my mining.
I am finding valid shares on the mining window.
It says I'm doing about .34 to .36 chains per day on the mining window.

How long does it take for my stats to start showing up on the site??

Thanks for info.

batko

full member

Activity: 169

Merit: 100

default config, only change ASM

cirlama

jr. member

Activity: 156

Merit: 1

Quote from: batko on August 03, 2019, 05:44:53 AM

RX 480 nitro + 1200/2000 - 0.46CPD blockhain driver.

what are your settings, the basic ones below Huh

sieveSize = "480";
weaveDepth = "36864";
width = "auto";
windowSize = "8192";
multiplierLimits = ["25", "31", "34"];

batko

full member

Activity: 169

Merit: 100

RX 480 nitro + 1200/2000 - 0.46CPD blockhain driver.

cirlama

jr. member

Activity: 156

Merit: 1

Quote from: Pinocchio on July 22, 2019, 03:20:39 PM

Some results (ver 10.3 vs 10.5):

Radeon Vega 56: 0.7 CPD -> close to 0.8 CPD
Radeon Nano: 0.5 CPD -> close to 0.6 CPD
Radeon Rx 480: 0.4-0.42 CPD -> 0.43 CPD

Rx 480 doesn't give me 0.5 CPD, what sieve size and similar settings should I try to get there?

Hi all, what are your settings to get 0.43 CPD on RX480 (or 580...), mine seems a bit lower, it was some time ago but if I remember well, I tried many settings...

tar1s

jr. member

Activity: 40

Merit: 1

a7269118
Just luck Grin

a7269118

newbie

Activity: 14

Merit: 0

Quote from: a7269118 on July 24, 2019, 11:52:16 PM

Quote from: singlass on July 24, 2019, 07:46:30 PM

please show Tahiti some love & bless it with the asm kernel fatha

The new version of 10.5 asm mode has increased a lot of cpd, the original 8 amd gpu only 2.96cpd, rose to 3.43 in asm mode, but the stability is tested as needed.

But the temperature of ASM mode has risen to 70 degrees ~ very high temperature

25 GPU power increased by 144W

The original version 10.2.2 is 9.3 CPD
Rise to 11.08CPD

Using version 10.5 for a few days, I found one thing, counting 11 CPD per day, theoretically 87 XPM a day.
https://upload.cc/i1/2019/08/01/wQrWnx.jpg

But I found that 96XPM was dug for a day, equivalent to 12 CPD computing power. I think the developer's so-called Radeon 4xx / 5xx GPU on Linux is up to 30%, and it can also be on WINDOWS, but it can't be displayed on the computing power.

https://upload.cc/i1/2019/08/01/c4uWpk.jpg
https://upload.cc/i1/2019/08/01/Ob3kUx.jpg

a7269118

newbie

Activity: 14

Merit: 0

Quote from: singlass on July 24, 2019, 07:46:30 PM

please show Tahiti some love & bless it with the asm kernel fatha

The new version of 10.5 asm mode has increased a lot of cpd, the original 8 amd gpu only 2.96cpd, rose to 3.43 in asm mode, but the stability is tested as needed.

But the temperature of ASM mode has risen to 70 degrees ~ very high temperature

25 GPU power increased by 144W

The original version 10.2.2 is 9.3 CPD
Rise to 11.08CPD

singlass

jr. member

Activity: 65

Merit: 1

please show Tahiti some love & bless it with the asm kernel fatha

Topic: Open Source XPM (Primecoin) GPU Miner & Pool xpmforall.org - page 6. (Read 109866 times)