Hello, may I have someone encountered this problem?
GPU has RX570, a total of 9
My computing power has 3.13 CPD
In theory, the final test difficulty is 11.30, and there will be 16 XPM in one day.
But when I actually tested for an hour, it only increased by 0.42 XPM, which is equivalent to about 10 XPM per day, which is very different from the result of the calculator.
It is the same whether use version 10.2.2 or 10.3.
Whether the driver version is the latest 19.3.1 or the mining driver is the same
My parameters are set as follows
platform = "amd";
cpuload = "1";
target = "auto";
sieveSize = "420";
weaveDepth = "40960";
width = "auto";
windowSize = "8192";
multiplierLimits = ["24", "31", "35"];
Overclocking parameters are the same as Core 1300 / Memory 1750, or Core 1150 / Memory 2000
The average daily is lower than the computer 10~14 XPM
But it started to decrease after February 24~ there are 24 XPM in one day.
I have been digging for half a year, but never less than the calculator is so big
Topic: Open Source XPM (Primecoin) GPU Miner & Pool xpmforall.org - page 9. (Read 110182 times)
64 bit, ofcourse.
All my rigs are with win 10, all with 8 gb of ram, same drivers, on two on them 32-bit is working, on other 3 not working.
I do not know on which memory do you mean, but i think that is not problem.
Something else, but doesnt know what.
bit depth of windows 10? 32 or 64 bits? I do not know on which memory do you mean, but i think that is not problem.
Something else, but doesnt know what.
All my rigs are with win 10, all with 8 gb of ram, same drivers, on two on them 32-bit is working, on other 3 not working.
I do not know on which memory do you mean, but i think that is not problem.
Something else, but doesnt know what.
I do not know on which memory do you mean, but i think that is not problem.
Something else, but doesnt know what.
Hi,
I have this "64 bit kernels not supported on 32 bit executable" errors on 3 of my 5 mining rigs, AMD Rx 470,480,570 cards.
What can I do to make all my rigs work with 32-bit miner ?
Miner users reported error "64 bit kernels not supported on 32 bit executable" in some cases, x86_64 version not have this issue.
I can add x86 build support to deploy system (https://github.com/eXtremal-ik7/xpmclient/tree/version/zcash/contrib), after this you can build x86 version by yourself.
Hi,
I have this "64 bit kernels not supported on 32 bit executable" errors on 3 of my 5 mining rigs, AMD Rx 470,480,570 cards.
What can I do to make all my rigs work with 32-bit miner ?
Hi Masters, please share a configuration parameter of GTX780/780Ti …
Hi guys,
I have this problem with the new client:
compiling ...
source: 222565 bytes
xpm.cu(6885): error: identifier "SIEVERANGE3" is undefined
xpm.cu(6896): error: identifier "SIEVERANGE1" is undefined
xpm.cu(6910): error: identifier "SIEVERANGE2" is undefined
xpm.cu(6954): error: identifier "SIEVERANGE3" is undefined
4 errors detected in the compilation of "xpm.cu".
I have this problem with the new client:
- GeForce GTX 1080 Ti; Compute capability 6.1
xpm.cu(6885): error: identifier "SIEVERANGE3" is undefined
xpm.cu(6896): error: identifier "SIEVERANGE1" is undefined
xpm.cu(6910): error: identifier "SIEVERANGE2" is undefined
xpm.cu(6954): error: identifier "SIEVERANGE3" is undefined
4 errors detected in the compilation of "xpm.cu".
what you R9 390 cpd ?
18.8.110.2.2->~0.47
10.3->~0.44
Lost quite a bit of speed with the new version..
Testing with datacoin
10.2.2 > 178-182 CPD on all 3 of my cards. 2x RX580 and 1 R9 280
10. 3 > 160 - 165 CPD on each card if i play with the settings i can get the RX580's to 170-175 CPD but the R9280 Still sits in the low 160's
Testing with datacoin
10.2.2 > 178-182 CPD on all 3 of my cards. 2x RX580 and 1 R9 280
10. 3 > 160 - 165 CPD on each card if i play with the settings i can get the RX580's to 170-175 CPD but the R9280 Still sits in the low 160's
what you R9 390 cpd ?
18.8.110.2.2->~0.47
10.3->~0.44
Hello!
I have a problem
Earlier I used the R390 + Radeon Pro Duo. Connection was via R390
Then R390 burned down due to a failed fan))
Now Pro Duo can not run for mining. The client starts for 1 second and immediately closes itself.
A similar situation on the second computer with R5 2400G
What to do?))
that's what he writes in the logs
2019-03-21 14:33:41.043 ( 0.196s) ERR| OpenCL error: -42 at /home/user/build/xpmclient/src/opencl.cpp:142
I have a problem
Earlier I used the R390 + Radeon Pro Duo. Connection was via R390
Then R390 burned down due to a failed fan))
Now Pro Duo can not run for mining. The client starts for 1 second and immediately closes itself.
A similar situation on the second computer with R5 2400G
What to do?))
that's what he writes in the logs
2019-03-21 14:33:41.043 ( 0.196s) ERR| OpenCL error: -42 at /home/user/build/xpmclient/src/opencl.cpp:142
I did not notice any changes in speed for 580 - as it was, 0.44 remained.
I did not notice any changes in speed for 580 - as it was, 0.44 remained.
Is the speed the same?
Quote
Quote from: pepi on March 17, 2019, 12:16:39 PM
Solo mining with this client yes/no?
For solo mining need pool build with dropped accounting, web and other unnecessary parts. Also, pool required patched primecoind client and linux only. Need rewrite some code of pool, I working on it.
Why you not want use madmax's client for solo mining?
https://github.com/madMAx43v3r/xpmserver
Solo mining with this client yes/no?
For solo mining need pool build with dropped accounting, web and other unnecessary parts. Also, pool required patched primecoind client and linux only. Need rewrite some code of pool, I working on it.
Why you not want use madmax's client for solo mining?
https://github.com/madMAx43v3r/xpmserver
1. Because it is 5 years old
2. Dont know hot to compile it
3. Datacoin mine solo without any problem,so only problem we have is primecoin wallet. And Primecoin wallet is one of few that native doesnot support solo mining ( and long time ago it was promised that will be fixed but we are still waiting for that)
4. That old code has some issues with changing IP address so I dont wont to mine many hours for nothing.
Internal changes are rewritten to code to fix that but they was never released to github
0.74(75), 
it was 0.79, but I lost the settings
580-> 0,45(46)
Known problem, some drivers create non-optimal kernels.. for example, kernel compiled for R9 29x on old drivers works better on Polaris GPUs. Need fix it in next miner version 10.4.it was 0.79, but I lost the settings
580-> 0,45(46)
Пpивeтcтвyю, в чём x64 вepcия xpmclient "лyчшe" x86 ?
Бoльшe 2гб oзy для пpoцecca xpmclient вpoдe нe нyжнo, нaгpyзкa нa пpoцeccop низкaя дaжe в x86 вepcии. A вoт kernel's мeждy x86 и x64 вepcиями нe coвмecтимы.
Пpocьбa coбepитe x86 вepcию для xpmclient 10.3
Need use English here.Бoльшe 2гб oзy для пpoцecca xpmclient вpoдe нe нyжнo, нaгpyзкa нa пpoцeccop низкaя дaжe в x86 вepcии. A вoт kernel's мeждy x86 и x64 вepcиями нe coвмecтимы.
Пpocьбa coбepитe x86 вepcию для xpmclient 10.3
Miner users reported error "64 bit kernels not supported on 32 bit executable" in some cases, x86_64 version not have this issue.
I can add x86 build support to deploy system (https://github.com/eXtremal-ik7/xpmclient/tree/version/zcash/contrib), after this you can build x86 version by yourself.
Solo mining with this client yes/no?
For solo mining need pool build with dropped accounting, web and other unnecessary parts. Also, pool required patched primecoind client and linux only. Need rewrite some code of pool, I working on it.Why you not want use madmax's client for solo mining?
https://github.com/madMAx43v3r/xpmserver
Is this still open source?
xpmclient alltimes open sourcehttps://github.com/eXtremal-ik7/xpmclient/tree/version/zcash
Same decrease on R9 380 and R9 390. Driver version is 19.3.2.
I have checked R9 390, but used little bit different config:Quote
sieveSize = "630";
multiplierLimits = ["25", "31", "34"];
And got same results as 10.2.2 miner. multiplierLimits = ["25", "31", "34"];
390 and 480 -> -0.03 (0.04) cpd 
Same decrease on R9 380 and R9 390. Driver version is 19.3.2.
390 and 480 -> -0.03 (0.04) cpd
Same decrease on R9 380 and R9 390. Driver version is 19.3.2.
Jump to: