Topic: Open Source ZEC (ZCash) GPU Miner AMD & NVidia (up to 45 sol/s on RX480) - page 109. (Read 320684 times)
October 28, 2016, 12:22:29 PM
my miner crashes on win 10 running 6x rx470s
October 28, 2016, 12:22:18 PM
Begin to switching to main net, pool will be unavailable during few minutes (up to 30) 
When mining on coins for all can we designate individual workers as: zxxxxxxx.rig1By adding .worker to end of address.
THX
October 28, 2016, 12:21:41 PM
Trying to open suprnova, but it is down. Somebody has the same problem?
yes its downIt is still down. It might be attacked by some concerned parties. Suprnova is quite a good pool recently.
October 28, 2016, 12:18:16 PM
You know I really visioned some guy sitting in his underwear on a PC typing some commands.
LOL
October 28, 2016, 12:17:18 PM
Does the fanspeed setting work on Linux? Doesn't seem to do anything on my 470's, and the fan is too slow.
The new AMDGPU-PRO Driver for Linux doesn't seem to have any console app to adjust it.
same here. it's over 70oC. sometimes, one of my gpu (6xRX470) crash.The new AMDGPU-PRO Driver for Linux doesn't seem to have any console app to adjust it.
Same same,
Running silent army under linux with rx 480 because win10 crashes with silent army but gives double sols compared to non-silent army..
It would be really nice if we could, in Linux, control freq, mem, fan through the config.txt as there is no AMD tweak tool for Linux as there is Wattman for Windows.. But.. changing this config.txt makes no changes.. not even turns fans faster..?
GPU's getting quite hot and need to turn fans up.. but how?
increase value in /sys/class/drm/card0/device/hwmon/hwmon0/pwm1 (default on mine was 35)
i.e. set fans to 250 (255 is max)
Code:
sudo echo 250 > /sys/class/drm/card0/device/hwmon/hwmon0/pwm1
additional cards change card# hwmon#
October 28, 2016, 12:16:44 PM
You know I really visioned some guy sitting in his underwear on a PC typing some commands.
October 28, 2016, 12:16:10 PM
Trying to open suprnova, but it is down. Somebody has the same problem?
yes its down October 28, 2016, 12:15:46 PM
Trying to open suprnova, but it is down. Somebody has the same problem?
October 28, 2016, 12:15:16 PM
Yes you need new address
thank you - may I ask how I would go about doing this? do i need to edit the zcash.conf file in linux wallet and then restart wallet and generate new wallet address?
i am pretty sure thats what has to be done but what do we change the zcash.conf to get the wallet on the mainnet
October 28, 2016, 12:14:11 PM
git updated with 1.0.0
genesis block is public
genesis block is public
October 28, 2016, 12:14:04 PM
Yes you need new address
thank you - may I ask how I would go about doing this? do i need to edit the zcash.conf file in linux wallet and then restart wallet and generate new wallet address?
You can reference this guide https://github.com/zcash/zcash/wiki/1.0-User-Guide
October 28, 2016, 12:12:51 PM
Yes you need new address
thank you - may I ask how I would go about doing this? do i need to edit the zcash.conf file in linux wallet and then restart wallet and generate new wallet address?
October 28, 2016, 12:11:47 PM
Yes you need new address
thank you - may I ask how I would go about doing this? do i need to edit the zcash.conf file in linux wallet and then restart wallet and generate new wallet address?
October 28, 2016, 12:07:40 PM
October 28, 2016, 12:05:10 PM
Yes you need new address
October 28, 2016, 12:01:50 PM
Begin to switching to main net, pool will be unavailable during few minutes (up to 30)
New addresses are required correct? RC4? October 28, 2016, 12:01:42 PM
Begin to switching to main net, pool will be unavailable during few minutes (up to 30)
do we need to create a new main net zcash address?
October 28, 2016, 11:55:44 AM
orionpaxx12
Error -4 is CL_MEM_OBJECT_ALLOCATION_FAILURE, you have not enough memory, or can't access entire memory on card (may be GPU_MAX_ALLOC_PERCENT и GPU_USE_SYNC_OBJECTS variables can help you).
Error -4 is CL_MEM_OBJECT_ALLOCATION_FAILURE, you have not enough memory, or can't access entire memory on card (may be GPU_MAX_ALLOC_PERCENT и GPU_USE_SYNC_OBJECTS variables can help you).
ok thanks the 1070 is 8gb where exactly would i add the variables GPU_MAX_ALLOC_PERCENT и GPU_USE_SYNC_OBJECTS
try pasting this before your command line for your bat file
GPU_MAX_ALLOC_PERCENT 100
GPU_USE_SYNC_OBJECTS 100
yeah normally but there is no bat file just the config, and as far as i remember those variables are for amd, i am getting the error with the 1070, can you even create a bat file for this 2.2 ver.?
October 28, 2016, 11:54:57 AM
Begin to switching to main net, pool will be unavailable during few minutes (up to 30)
October 28, 2016, 11:52:05 AM
Does the fanspeed setting work on Linux? Doesn't seem to do anything on my 470's, and the fan is too slow.
The new AMDGPU-PRO Driver for Linux doesn't seem to have any console app to adjust it.
same here. it's over 70oC. sometimes, one of my gpu (6xRX470) crash.The new AMDGPU-PRO Driver for Linux doesn't seem to have any console app to adjust it.
Same same,
Running silent army under linux with rx 480 because win10 crashes with silent army but gives double sols compared to non-silent army..
It would be really nice if we could, in Linux, control freq, mem, fan through the config.txt as there is no AMD tweak tool for Linux as there is Wattman for Windows.. But.. changing this config.txt makes no changes.. not even turns fans faster..?
GPU's getting quite hot and need to turn fans up.. but how?
https://sourceforge.net/projects/amdovdrvctrl/
already try that one as well but no luck..
Jump to: