Open Source ZEC (ZCash) GPU Miner AMD & NVidia (up to 45 sol/s on RX480) - page 110.

nevermind41

full member

Activity: 186

Merit: 100

Quote from: TheKoolaider on October 28, 2016, 10:44:50 AM

Quote from: nevermind41 on October 28, 2016, 10:42:43 AM

D:\zcashclient-0.2.2>zcashgpuclient
madPrimeMiner-v1.1
ClientName = 'PC01' ClientID = 1682249513 InstanceID = 183674
Address = 'zthTb2ToG5kuAc11Ni6NxoYjoxQdEr2XvST7XEdLvmHG9k7kotEc
9kNeFm8CQok9SNtNgn8d9WcdTK'
found platform[0] name = 'Intel(R) OpenCL'
found platform[1] name = 'NVIDIA CUDA'
platform AMD Accelerated Parallel Processing not exists

Config is really hard to understand. I have 1070 rig. What must I do to work it properly?

anywhere it says amd in quotes, change it to nvidia. I was able to get that to detect the cards, but on my 750m I'm testing on, it would crash.

Thanks for your reply. I opened config with wordpad and I found the problem as you said. I always use notepad because of this I couldn't understand anything.

TheKoolaider

member

Activity: 84

Merit: 10

Quote from: orionpaxx12 on October 28, 2016, 10:47:08 AM

Quote from: eXtremal on October 28, 2016, 10:13:22 AM

orionpaxx12
Error -4 is CL_MEM_OBJECT_ALLOCATION_FAILURE, you have not enough memory, or can't access entire memory on card (may be GPU_MAX_ALLOC_PERCENT и GPU_USE_SYNC_OBJECTS variables can help you).

ok thanks the 1070 is 8gb where exactly would i add the variables GPU_MAX_ALLOC_PERCENT и GPU_USE_SYNC_OBJECTS

try pasting this before your command line for your bat file

GPU_MAX_ALLOC_PERCENT 100

GPU_USE_SYNC_OBJECTS 100

orionpaxx12

member

Activity: 101

Merit: 10

Quote from: eXtremal on October 28, 2016, 10:13:22 AM

orionpaxx12
Error -4 is CL_MEM_OBJECT_ALLOCATION_FAILURE, you have not enough memory, or can't access entire memory on card (may be GPU_MAX_ALLOC_PERCENT и GPU_USE_SYNC_OBJECTS variables can help you).

ok thanks the 1070 is 8gb where exactly would i add the variables GPU_MAX_ALLOC_PERCENT и GPU_USE_SYNC_OBJECTS

thaiphamce

newbie

Activity: 26

Merit: 0

Quote from: ratatella on October 28, 2016, 10:41:19 AM

Quote from: thaiphamce on October 28, 2016, 10:34:19 AM

Quote from: FlappySocks on October 28, 2016, 10:25:12 AM

Does the fanspeed setting work on Linux? Doesn't seem to do anything on my 470's, and the fan is too slow.
The new AMDGPU-PRO Driver for Linux doesn't seem to have any console app to adjust it.

same here. it's over 70oC. sometimes, one of my gpu (6xRX470) crash.

Same same,

Running silent army under linux with rx 480 because win10 crashes with silent army but gives double sols compared to non-silent army..

It would be really nice if we could, in Linux, control freq, mem, fan through the config.txt as there is no AMD tweak tool for Linux as there is Wattman for Windows.. But.. changing this config.txt makes no changes.. not even turns fans faster..?

GPU's getting quite hot and need to turn fans up.. but how?

I find an app here, but I can't install it. Maybe not work for ubuntu 16.04 Huh

https://sourceforge.net/projects/amdovdrvctrl/

TheKoolaider

member

Activity: 84

Merit: 10

Quote from: nevermind41 on October 28, 2016, 10:42:43 AM

D:\zcashclient-0.2.2>zcashgpuclient
madPrimeMiner-v1.1
ClientName = 'PC01' ClientID = 1682249513 InstanceID = 183674
Address = 'zthTb2ToG5kuAc11Ni6NxoYjoxQdEr2XvST7XEdLvmHG9k7kotEc
9kNeFm8CQok9SNtNgn8d9WcdTK'
found platform[0] name = 'Intel(R) OpenCL'
found platform[1] name = 'NVIDIA CUDA'
platform AMD Accelerated Parallel Processing not exists

Config is really hard to understand. I have 1070 rig. What must I do to work it properly?

anywhere it says amd in quotes, change it to nvidia. I was able to get that to detect the cards, but on my 750m I'm testing on, it would crash.

Gaglam

sr. member

Activity: 390

Merit: 250

That did the trick Grin

Thanks a lot

Silentarmy:

[GPU 0] T=-1C A=-1% sols=25.254
[GPU 1] T=-1C A=-1% sols=23.967
[GPU 2] T=-1C A=-1% sols=25.051
[GPU 3] T=-1C A=-1% sols=22.417
[GPU 4] T=-1C A=-1% sols=24.900

Normal version:

[GPU 0] T=-1C A=-1% sols=15.305
[GPU 1] T=-1C A=-1% sols=14.203
[GPU 2] T=-1C A=-1% sols=15.729
[GPU 3] T=-1C A=-1% sols=14.305
[GPU 4] T=-1C A=-1% sols=14.267

jpozz

newbie

Activity: 1

Merit: 0

Will the pool automatically switch over to the mainnet?
Right now we're only mining on the testnet right?
It's running fine on Windows 7 so far, though only once instance per GPU.

nevermind41

full member

Activity: 186

Merit: 100

D:\zcashclient-0.2.2>zcashgpuclient
madPrimeMiner-v1.1
ClientName = 'PC01' ClientID = 1682249513 InstanceID = 183674
Address = 'zthTb2ToG5kuAc11Ni6NxoYjoxQdEr2XvST7XEdLvmHG9k7kotEc
9kNeFm8CQok9SNtNgn8d9WcdTK'
found platform[0] name = 'Intel(R) OpenCL'
found platform[1] name = 'NVIDIA CUDA'
platform AMD Accelerated Parallel Processing not exists

Config is really hard to understand. I have 1070 rig. What must I do to work it properly?

ratatella

newbie

Activity: 21

Merit: 0

Quote from: thaiphamce on October 28, 2016, 10:34:19 AM

Quote from: FlappySocks on October 28, 2016, 10:25:12 AM

Does the fanspeed setting work on Linux? Doesn't seem to do anything on my 470's, and the fan is too slow.
The new AMDGPU-PRO Driver for Linux doesn't seem to have any console app to adjust it.

same here. it's over 70oC. sometimes, one of my gpu (6xRX470) crash.

Same same,

Running silent army under linux with rx 480 because win10 crashes with silent army but gives double sols compared to non-silent army..

It would be really nice if we could, in Linux, control freq, mem, fan through the config.txt as there is no AMD tweak tool for Linux as there is Wattman for Windows.. But.. changing this config.txt makes no changes.. not even turns fans faster..?

GPU's getting quite hot and need to turn fans up.. but how?

tbearhere

legendary

Activity: 3164

Merit: 1003

My god... why did they make it sooooooooooo different to mine a coin? ? ?

eXtremal

sr. member

Activity: 2106

Merit: 282

👉bit.ly/3QXp3oh | 🔥 Ultimate Launc

Quote from: Gaglam on October 28, 2016, 10:36:28 AM

Quote from: eXtremal on October 28, 2016, 10:31:34 AM

Message about R9 280X and version 0.2.2:

Quote

Yes, that works with 1 instance of silentarmy

About 20 sols on stock clocks.

cant start silentarmy with my r9 280x's:

found 5 devices
Using device 0 as GPU 0
Using device 1 as GPU 1
Using device 2 as GPU 2
Using device 3 as GPU 3
Using device 4 as GPU 4
OpenCL error: -11 at /build/xpmclient/src/opencl.cpp:163

Driver issues 100%
Remove binaries and try another

fmz89

legendary

Activity: 1762

Merit: 1002

Quote from: eXtremal on October 28, 2016, 10:31:34 AM

Message about R9 280X and version 0.2.2:

Quote

Yes, that works with 1 instance of silentarmy

About 20 sols on stock clocks.

what windows version doing well on silentarmy?

muleman8

member

Activity: 121

Merit: 10

how do we create a mainnet wallet address on linux?

Raja_MBZ

legendary

Activity: 1834

Merit: 1520

Quote from: majestymage on October 28, 2016, 10:31:30 AM

they started the blockchain? we can mine now?

When they will, you'll clearly see some extra activity in Mining (Altcoins) section for sure. Tongue

Still busy in configuring the miner best for mining (higher hash-rate with less electric consumption). I'll surely post my results in separate thread for RX 480 owners.

Gaglam

sr. member

Activity: 390

Merit: 250

Quote from: eXtremal on October 28, 2016, 10:31:34 AM

Message about R9 280X and version 0.2.2:

Quote

Yes, that works with 1 instance of silentarmy

About 20 sols on stock clocks.

cant start silentarmy with my r9 280x's:

found 5 devices
Using device 0 as GPU 0
Using device 1 as GPU 1
Using device 2 as GPU 2
Using device 3 as GPU 3
Using device 4 as GPU 4
OpenCL error: -11 at /build/xpmclient/src/opencl.cpp:163

thaiphamce

newbie

Activity: 26

Merit: 0

Quote from: FlappySocks on October 28, 2016, 10:25:12 AM

Does the fanspeed setting work on Linux? Doesn't seem to do anything on my 470's, and the fan is too slow.
The new AMDGPU-PRO Driver for Linux doesn't seem to have any console app to adjust it.

same here. it's over 70oC. sometimes, one of my gpu (6xRX470) crash.

krile

hero member

Activity: 746

Merit: 500

Quote from: majestymage on October 28, 2016, 10:31:30 AM

they started the blockchain? we can mine now?

not yet

eXtremal

sr. member

Activity: 2106

Merit: 282

👉bit.ly/3QXp3oh | 🔥 Ultimate Launc

Message about R9 280X and version 0.2.2:

Quote

Yes, that works with 1 instance of silentarmy

About 20 sols on stock clocks.

majestymage

hero member

Activity: 994

Merit: 504

they started the blockchain? we can mine now?

krile

hero member

Activity: 746

Merit: 500

Quote from: adamvp on October 28, 2016, 10:29:38 AM

could anyone provide a link to the Zcashclient 0.2.2 or other working gpu client??

Its in the OP

Topic: Open Source ZEC (ZCash) GPU Miner AMD & NVidia (up to 45 sol/s on RX480) - page 110. (Read 320715 times)