Open Source ZEC (ZCash) GPU Miner AMD & NVidia (up to 45 sol/s on RX480) - page 141.

giagge

legendary

Activity: 1134

Merit: 1001

I have try this , all on windows 10 x64 , driver whql 375 .

2 gtx 1070 with this config
devices = ["1", "1", "1", "1", "1"];

1 gtx 1070 with this config
devices = ["1", "0", "0", "0", "0"];

2 x gtx 1070 but launch 2 istance with this config
1x devices = ["1", "0", "0", "0", "0"];
2x devices = ["0", "1", "0", "0", "0"];

Pls fix it

.

RandyMagnum

sr. member

Activity: 662

Merit: 250

A Windows GPU miner with stratum support is missing from the landscape right now and it would offer a simple workaround for those that don't want to build zcashd on a linux system to get an address. They could keep the coins on a stratum pool and payout to an exchange or wait for a Windows wallet.

giagge

legendary

Activity: 1134

Merit: 1001

Ok now work , but dont good hashrate , 2 x gtx 1070 on windows 10 x64 only 9.5 sol for card .

.

Gaglam

sr. member

Activity: 390

Merit: 250

I'm running it on win7

orionpaxx12

member

Activity: 101

Merit: 10

Quote from: eXtremal on October 24, 2016, 10:58:14 AM

Quote

So youre saying I can use this mining on an Eth rig that is windows 10 by just using the windows binary ? I dont have to do the Windows Ubuntu shell install to use it ?

Yes, no problem mining in windows 10, but you must obtain valid Z-Address for payments, it possible only on linux or on first online exchange with ZCash deposit support.

Quote

Also how about CPU mining can this miner do both CPU and GPU at the same time or do you need to use something like NiceHash'es fee based miner on a separate console ?

I'll release separate CPU miner after 1-2 days.

is this miner only for win 10, cant seem to get it running on win7 always comes up with an error, thanks in advance

Flenger

full member

Activity: 165

Merit: 100

GTX 1060 6G = 16 sol/s Win 7 64

AMD (Crimson-15.12-With-DOTNet45-Win7-64Bit) - OpenCL error: -42 at /build/xpmclient/src/opencl.cpp:152

AMD (Non-WHQL-Win10-64Bit-Radeon-Software-Crimson-16.10.2-Oct19) Win 10 64
[GPU 0] T=-1C A=-1% sols=17.746 rx470 4
[GPU 1] T=-1C A=-1% sols=16.593 rx470 4
[GPU 2] T=-1C A=-1% sols=19.102 rx480 8
[GPU 3] T=-1C A=-1% sols=20.051 rx480 8
[GPU 4] T=-1C A=-1% sols=19.441 rx480 8

tiCeR

hero member

Activity: 1946

Merit: 867

Defend Bitcoin and its PoW: bitcoincleanup.com

Quote from: Amph on October 25, 2016, 12:04:33 PM

Quote from: ivcelmik on October 25, 2016, 11:12:28 AM

Quote from: millefiori on October 25, 2016, 11:03:36 AM

750 ti makes ~10 s/s

Correct but with multi gpu spil the hashrate if u try with 5 gpus u get 2s/s for each

when this will be fixed on windows? on ubutntu it appear to be working with multiple gpu?

So its just a wrong display?

I edited the config just to use ojne gpu but it looks like it full ignors it ? Sad

tiCeR

hero member

Activity: 1946

Merit: 867

Defend Bitcoin and its PoW: bitcoincleanup.com

Quote from: millefiori on October 25, 2016, 12:02:33 PM

Quote from: ivcelmik on October 25, 2016, 11:50:18 AM

Yes with 2 card spilt the hasrate in 2 with 3 split in 10/3 and so on

I had the same on ethOS (built on ubuntu) when mined ETH with pair of r9 380's on old s775 MoBo. Had a 9,5 hashrate on each of two cards. One alone was giving stable 18,5.
After switching to Win 7 problem has disappearerd and only thing each card does 17,5 even with some mem bust.

So what sys do you have? May be using Win can solve that problem too?

I am on windows because i failed for round about 8 hours to get amd drivers installed on ubuntu :/

noobtrader

legendary

Activity: 1456

Merit: 1000

great info, my gpu are now ready Wink

Amph

legendary

Activity: 3248

Merit: 1070

Quote from: ivcelmik on October 25, 2016, 11:12:28 AM

Quote from: millefiori on October 25, 2016, 11:03:36 AM

750 ti makes ~10 s/s

Correct but with multi gpu spil the hashrate if u try with 5 gpus u get 2s/s for each

when this will be fixed on windows? on ubutntu it appear to be working with multiple gpu?

millefiori

newbie

Activity: 28

Merit: 0

Quote from: ivcelmik on October 25, 2016, 11:50:18 AM

Yes with 2 card spilt the hasrate in 2 with 3 split in 10/3 and so on

I had the same on ethOS (built on ubuntu) when mined ETH with pair of r9 380's on old s775 MoBo. Had a 9,5 hashrate on each of two cards. One alone was giving stable 18,5.
After switching to Win 7 problem has disappearerd and only thing each card does 17,5 even with some mem bust.

So what sys do you have? May be using Win can solve that problem too?

tiCeR

hero member

Activity: 1946

Merit: 867

Defend Bitcoin and its PoW: bitcoincleanup.com

Quote from: gegebitlover on October 24, 2016, 07:09:53 PM

Quote from: dianasta on October 24, 2016, 03:01:11 PM

3 x Sapphire 290X ~ 51 sols/s

[GPU 0] T=-1C A=-1% sols=16.829
[GPU 1] T=-1C A=-1% sols=17.005
[GPU 2] T=-1C A=-1% sols=17.040

hello you can give us your setup memory clock please because i have 4 R9 290 running at 10.7 sol his would be cool thank you

What are your settings? I just end with this with 4x 280x saphire

sols 9,7 on each card :/

_javi_

hero member

Activity: 968

Merit: 624

Still a manic miner

Do you need just the nvidia driver or something else? I get opencl error while trying with a 1070

padrino

legendary

Activity: 1428

Merit: 1000

https://www.bitworks.io

Any word on general stratum support?

ivcelmik

sr. member

Activity: 519

Merit: 250

Quote from: iom on October 25, 2016, 11:32:28 AM

Quote from: millefiori on October 25, 2016, 11:22:07 AM

Quote from: ivcelmik on October 25, 2016, 11:12:28 AM

if u try with 5 gpus u get 2s/s for each

I've read above that only 4 gpus are limited for that miner (work properly). is that right? Or even 2 will be bad allready?

Problem is the same with 2 Nvidia cards too.

Yes with 2 card spilt the hasrate in 2 with 3 split in 10/3 and so on

Cryptozillah

hero member

Activity: 687

Merit: 502

Quote from: CjMapope on October 25, 2016, 11:33:53 AM

Quote from: Cryptozillah on October 25, 2016, 11:11:16 AM

Any wallets for Windows available yet ?

what?

this is a GPU miner thread...

plus zcash doesn't even get released till the 28th, AND has already stated there will NOT be windows wallets on launch...

please do some research before coming into a thread with useless questions... or for god sake alteast READ the OP...

Buy a better fucking attitude.. thnx

anorganix

copper member

Activity: 970

Merit: 287

Per aspera ad astra

Remove the pause and the . (dot) from the config.
Fanspeed = XXX YYY ZZZ should be your last line.

And change platform from amd to nvidia.

Gaglam

sr. member

Activity: 390

Merit: 250

Well, maybe because a nvidia gtx 1070 is not an AMD Card?
Just maybe... Huh

valkot

newbie

Activity: 35

Merit: 0

Quote from: giagge on October 25, 2016, 11:36:52 AM

My nvidia gtx 1070 dont work on windows 10 , use this config.txt :

server = "coinsforall.io";
port = "6668";

# Your ZCASH payout address
address = "zthTb2ToG5kuAc11Ni6NxoYjoxQdEr2XvST7XEdLvmHG9k7kotEcwYCaAn1SH4zRdPoXn9kNeFm8CQo k9SNtNgn8d9WcdTK";

# You can give this machine a custom name
# Computer name is used as default
# name = "worker_name";

# Platform:
# "amd": AMD GCN cards
# "nvidia": NVidia Maxwell cards
platform = "amd";

# GPU crash handling (properly untested feature):
# 0 - do nothing
# 1 - close miner application
# 2 - reboot system (need superuser rights)
onCrash = "0";

# - The following settings have one entry per GPU
# - If you have more than 4 just add more entries or leave it as is to use defaults
# - All entries must be separated by commas and set between double quotes

# 0 = don't use device
# 1 = use device
devices = ["1", "1", "1", "1", "1"];

# work sizes
worksizes = ["256", "256", "256", "256", "256"];

# threads
threads = ["8192", "8192", "8192", "8192", "8192"];

# -1 means don't change
corefreq = ["-1", "-1", "-1", "-1", "-1"];
memfreq = ["-1", "-1", "-1", "-1", "-1"];
powertune = ["-1", "-1", "-1", "-1", "-1"];
fanspeed = ["-1", "-1", "-1", "-1", "-1"];

pause

.

platform = "amd" Huh

?

giagge

legendary

Activity: 1134

Merit: 1001

My nvidia gtx 1070 dont work on windows 10 , use this config.txt :

server = "coinsforall.io";
port = "6668";

# Your ZCASH payout address
address = "zthTb2ToG5kuAc11Ni6NxoYjoxQdEr2XvST7XEdLvmHG9k7kotEcwYCaAn1SH4zRdPoXn9kNeFm8CQo k9SNtNgn8d9WcdTK";

# You can give this machine a custom name
# Computer name is used as default
# name = "worker_name";

# Platform:
# "amd": AMD GCN cards
# "nvidia": NVidia Maxwell cards
platform = "nvidia";

# GPU crash handling (properly untested feature):
# 0 - do nothing
# 1 - close miner application
# 2 - reboot system (need superuser rights)
onCrash = "0";

# - The following settings have one entry per GPU
# - If you have more than 4 just add more entries or leave it as is to use defaults
# - All entries must be separated by commas and set between double quotes

# 0 = don't use device
# 1 = use device
devices = ["1", "1", "1", "1", "1"];

# work sizes
worksizes = ["256", "256", "256", "256", "256"];

# threads
threads = ["8192", "8192", "8192", "8192", "8192"];

# -1 means don't change
corefreq = ["-1", "-1", "-1", "-1", "-1"];
memfreq = ["-1", "-1", "-1", "-1", "-1"];
powertune = ["-1", "-1", "-1", "-1", "-1"];
fanspeed = ["-1", "-1", "-1", "-1", "-1"];

pause

.

Topic: Open Source ZEC (ZCash) GPU Miner AMD & NVidia (up to 45 sol/s on RX480) - page 141. (Read 320717 times)