2013-06-17: payment sent to friedcat
And so it begins.
Pleasantries and gratitudes for orchestrating this exchange.
Topic: [OPEN Worldwide] Group Buy #6 @86/50 ASICMiner Erupter USB 2.04236 ea. @ 5 units - page 5. (Read 16784 times)
June 17, 2013, 08:55:08 AM
And so it begins.
Pleasantries and gratitudes for orchestrating this exchange.
June 17, 2013, 06:59:01 AM
Another question: I have the rasperry pi board. Can it be attached to the usb hub to get energy like the usb miners?
Depends on the hub:
http://elinux.org/RPi_VerifiedPeripherals#Powered_USB_Hubs
I have a Monoprice Aquagate which DOES power the pi and work. And an Anker that does NOT.
June 17, 2013, 06:41:29 AM
Another question: I have the rasperry pi board. Can it be attached to the usb hub to get energy like the usb miners?
June 17, 2013, 06:40:24 AM
Hi guys,
doesn't the last version of cgminer work with these things?
What about the pool? Is any of them still good ?
doesn't the last version of cgminer work with these things?
What about the pool? Is any of them still good ?
June 17, 2013, 05:59:50 AM
Down for the majority of 2 days? Maybe a few hours. I'm still getting my normal payouts from them. I have Oz as my backup, and I use cgminer 3.1.1.
They were down for like 6 hours+ today, and multiple hours yesterday.
That is a solid portion of time, I did not get to see the actual time down from work.
What are your hardware errors like in 3.1.1.?
Also, 3.2.2 just errors and closes, can't even get it to run.
Hmm. I don't recall it being down that much, but I wasn't watching it all the time.
I'm about 5% HW errors at diff ~5. I think that works about to about 1%. I haven't tried 3.2.2 yet, and I won't until I have time to blow or I see others post successful results.
M
June 17, 2013, 01:47:59 AM
GROUP BUY #6 IS NOW OFFICIALLY CLOSED.
just received a payment address from friedcat and payment has been sent: https://blockchain.info/tx/ff37d95fdab6e3b643392c08d97fad3d6762327938a8de77c2009d9d0355b308
just received a payment address from friedcat and payment has been sent: https://blockchain.info/tx/ff37d95fdab6e3b643392c08d97fad3d6762327938a8de77c2009d9d0355b308
And I was just looking forward to my other ACH's clearing soon to make it an even 10!
Darn!
June 17, 2013, 01:37:14 AM
GROUP BUY #6 IS NOW OFFICIALLY CLOSED.
just received a payment address from friedcat and payment has been sent: https://blockchain.info/tx/ff37d95fdab6e3b643392c08d97fad3d6762327938a8de77c2009d9d0355b308
just received a payment address from friedcat and payment has been sent: https://blockchain.info/tx/ff37d95fdab6e3b643392c08d97fad3d6762327938a8de77c2009d9d0355b308
June 17, 2013, 01:16:58 AM
Down for the majority of 2 days? Maybe a few hours. I'm still getting my normal payouts from them. I have Oz as my backup, and I use cgminer 3.1.1.
They were down for like 6 hours+ today, and multiple hours yesterday.
That is a solid portion of time, I did not get to see the actual time down from work.
What are your hardware errors like in 3.1.1.?
Also, 3.2.2 just errors and closes, can't even get it to run.
June 17, 2013, 12:06:29 AM
everything should be updated on OP, if you see anything incorrect, please let me know. time to get rest! 
I'm Jealous! as I'm yet to work on dinner! June 16, 2013, 11:53:20 PM
everything should be updated on OP, if you see anything incorrect, please let me know. time to get rest!
June 16, 2013, 08:15:57 PM
MikeMike; 3; 6.2318;1FTMMyzjigg5CKTTZh77GDv8Y6Lb4HPr5a
NOTE: this makes 8pcs total...
noted!NOTE: this makes 8pcs total...
I mean Sweet!
Anyone get these working well with CGminer?
I get 10% hardware errors in 3.1.1, which is the only one I can get to work.
In bitminter I get <0.5% errors, they don't run hot at all with these fans.
However bitminter pool has been dead for hte majority of two days, which sucks balls, and I need a backup pool.
Thoughts?
"New cgminer version, 3.2.2, hopefully fixes a lot of bugs with the direct USB behaviour on these devices."
https://bitcointalksearch.org/topic/m.2490394
However there is info there that links errors to heat.
June 16, 2013, 08:11:07 PM
MikeMike; 3; 6.2318;1FTMMyzjigg5CKTTZh77GDv8Y6Lb4HPr5a
NOTE: this makes 8pcs total...
noted!NOTE: this makes 8pcs total...
I mean Sweet!
Anyone get these working well with CGminer?
I get 10% hardware errors in 3.1.1, which is the only one I can get to work.
In bitminter I get <0.5% errors, they don't run hot at all with these fans.
However bitminter pool has been dead for hte majority of two days, which sucks balls, and I need a backup pool.
Thoughts?
"New cgminer version, 3.2.2, hopefully fixes a lot of bugs with the direct USB behaviour on these devices."
https://bitcointalksearch.org/topic/m.2490394
However there is info there that links errors to heat.
June 16, 2013, 08:07:34 PM
MikeMike; 3; 6.2318;1FTMMyzjigg5CKTTZh77GDv8Y6Lb4HPr5a
NOTE: this makes 8pcs total...
noted!NOTE: this makes 8pcs total...
I mean Sweet!
Anyone get these working well with CGminer?
I get 10% hardware errors in 3.1.1, which is the only one I can get to work.
In bitminter I get <0.5% errors, they don't run hot at all with these fans.
However bitminter pool has been dead for hte majority of two days, which sucks balls, and I need a backup pool.
Thoughts?
"New cgminer version, 3.2.2, hopefully fixes a lot of bugs with the direct USB behaviour on these devices."
https://bitcointalksearch.org/topic/m.2490394
However there is info there that links errors to heat.
June 16, 2013, 07:57:40 PM
Anyone get these working well with CGminer?
I get 10% hardware errors in 3.1.1, which is the only one I can get to work.
In bitminter I get <0.5% errors, they don't run hot at all with these fans.
However bitminter pool has been dead for hte majority of two days, which sucks balls, and I need a backup pool.
Thoughts?
I get 10% hardware errors in 3.1.1, which is the only one I can get to work.
In bitminter I get <0.5% errors, they don't run hot at all with these fans.
However bitminter pool has been dead for hte majority of two days, which sucks balls, and I need a backup pool.
Thoughts?
Down for the majority of 2 days? Maybe a few hours. I'm still getting my normal payouts from them. I have Oz as my backup, and I use cgminer 3.1.1.
M
June 16, 2013, 07:55:17 PM
MikeMike; 3; 6.2318;1FTMMyzjigg5CKTTZh77GDv8Y6Lb4HPr5a
NOTE: this makes 8pcs total...
noted!NOTE: this makes 8pcs total...
I mean Sweet!
Anyone get these working well with CGminer?
I get 10% hardware errors in 3.1.1, which is the only one I can get to work.
In bitminter I get <0.5% errors, they don't run hot at all with these fans.
However bitminter pool has been dead for hte majority of two days, which sucks balls, and I need a backup pool.
Thoughts?
June 16, 2013, 06:37:40 PM
MikeMike; 3; 6.2318;1FTMMyzjigg5CKTTZh77GDv8Y6Lb4HPr5a
NOTE: this makes 8pcs total...
noted!NOTE: this makes 8pcs total...
I mean Sweet!
June 16, 2013, 06:35:14 PM
ilpirata79; 6; 12.06; 1UKmHLagJ69SA4gWGMKcNdk5i7FJy6Vqp
sent PM, for 6 miners your payment is a bit short June 16, 2013, 06:27:18 PM
MikeMike; 3; 6.2318;1FTMMyzjigg5CKTTZh77GDv8Y6Lb4HPr5a
NOTE: this makes 8pcs total...
noted! NOTE: this makes 8pcs total...
June 16, 2013, 06:04:55 PM
ilpirata79; 6; 12.06; 1UKmHLagJ69SA4gWGMKcNdk5i7FJy6Vqp
June 16, 2013, 06:01:15 PM
MikeMike; 3; 6.2318;1FTMMyzjigg5CKTTZh77GDv8Y6Lb4HPr5a
NOTE: this makes 8pcs total...
NOTE: this makes 8pcs total...
Jump to: