Bitcoin Forum>Alternate cryptocurrencies>Mining (Altcoins)
Pages:
Author

Topic: [OS] nvOC easy-to-use Linux Nvidia Mining - page 23. (Read 418313 times)

Rev123
newbie
Activity: 14
Merit: 0
Re: [OS] nvOC easy-to-use Linux Nvidia Mining
June 23, 2018, 12:43:21 PM
#7877
Quote from: papampi on June 20, 2018, 01:39:24 AM
nvOC 19-2.1 beta image, Ubuntu 16.04, Nvidia 390, Date 180619

Thanks to all contributors.

This is a beta image and not fully tested yet.
Please post bugs, errors,questions and any problems here in forum or GitHub issues.

nvOC_V19-2.1beta_U16.04_N390_D180619.img sha256:
cb607c8e028d3bc0a0e274c34b4e0def0c71330053f0c8328120a717e0029938

nvOC_V19-2.1beta_U16.04_N390_D180619.img.zip sha256:
7700dfdfc1cabab8a1dd9816a6322d6653c89943cb63afa59e79f88cfe14a6a9

Zip download size 3.6 Gb, Image size 9 Gb
Auto expand to fill all the volume at first boot.

Download link

Write the image with your favourite image writer of choice
Browse to the small fat partition you can see on the drive, edit 1bash.
Auto start miner is set to no, change it when you are sure all settings are correct.
Attach the SSD/USB/HDD to rig and boot up.
USB install not recommended for mining, only use it for testing.


Good luck.
Keep calm and carry on mining.

Hello.
Does the new version support Equihash 144.5 & 192.7? If not then when is planned? THX.
LuKePicci
jr. member
Activity: 128
Merit: 1
Re: [OS] nvOC easy-to-use Linux Nvidia Mining
June 23, 2018, 12:23:24 PM
#7876
Quote from: CryptAtomeTrader44 on June 22, 2018, 07:28:21 PM
Quote from: LuKePicci on June 15, 2018, 05:31:17 AM
Quote from: CryptAtomeTrader44 on June 13, 2018, 05:44:37 PM

When do you plan to provide a new ISO file ? How much time testing ?


Thank you for all your feedbacks, please test again the miners update procedure, we did some chenges recently, in case of any issue with the testing version please report on github, to avoid confusing people here. As you see lot of things changed, and the testing stage is just at the beginning. The more people test the new beta version, the more we feel confident in declaring it as ready. Please remember to always attach a report anytime you report issues because the report contains version info needed to understand which test version you are running at that time.

A few pages ago, we had discussed updating to a newer version of ubuntu that was to be released last spring. What about these projects?

As I wrote, I think Xubuntu could do the trick and be a little lighter. I know that leenoox also wanted to propose many other systems even more minimalist but I do not know if he finally gave up his idea to lighten the image of nvOC.
A lot of work has been done to decople the whole nvOC thing, including miners and firstboot management from Ubuntu as a base OS. Now, if someone in this nice community would like to work on an image built on top of Xubuntu/Lubuntu or whatever is at least "doable" without taking care of patching nvOC scripts. All scripts are now portable enough, I think, the only work to do in case someone want to run it on a different OS is to install nvidia and motherboard support drivers, together with all kind of system optimizations he want. In other words, what @leenux was proposing is now an easy task to deal with, for anyone, BUT keep in mind that, as @leenux pointed out in this discussion on GitHub, it would be quite impossible for anybody here to be able to support you if you're using an image which is custom built by you.
LuKePicci
jr. member
Activity: 128
Merit: 1
Re: [OS] nvOC easy-to-use Linux Nvidia Mining
June 23, 2018, 11:40:09 AM
#7875
Thank you for your extensive testing.
Future images will have a new firstboot management that will hopefully work better and support recompilation as well.

> 1st/2nd test
Regarding 1bash, 2.1 template is very different from the old 2.0 version, and any attempt to let nvOC run or import it automatically from the fat partition will lead to basically random errors. It is absolutely needed to update/match a new template with all your old config to get it working. For that reason only, your tests using the old 1bash wouldn't get you too far. Newer images will have a README in the small fat partition to help you download an updated (and working) template. Also, if 1bash version is older or mismatching with the expected one you will get an alert.

> 3rd/4th test
3main was looping while on FTC because its miner was not yet recompiled. For the same reason, as you pointed out, FTC manual mining was not functional.
On first launch, the default 1bash is configured to mine ETH, so it will start mining it. After a short while WTM_SWITCHING starts working and if the best coin to mine is different he will update 1bash and restart nvOC scripts to perform the switch.
Regarding the compilation of miners, seems that your miners (and parent) folder is somehow broken, as if it has not been initialized properly. Was the compiling error related to a custom terminal profile you created or with the image default one? Please cd to ~/NVOC/testing and post the output of
Code:
git status

> 5th/6th test
Don't mind the content of the home folder, there is some stuff from the old 2.0 version to allow testers have both old 2.0 and 2.1 available, will be cleaned up in future images. All 2.1 testing stuff is inside NVOC/testing (if pap actually used this path).
The commend near ETH_EXTENSION_ARGUMENTS is misleading, eth extension arguments apply anytime you mine eth, with any miner, not just for claymore. Will change it, thanks for pointing it out.
CryptAtomeTrader44
full member
Activity: 340
Merit: 103
It is easier to break an atom than partialities AE
Re: [OS] nvOC easy-to-use Linux Nvidia Mining
June 23, 2018, 11:01:15 AM
#7874
6 / New test on ETH with the miner BMINER (no 2nd coin, ETH only) by modifying only the MINER = BMINER
Code:
service lightdm restart

Code:
   SCREEN -c /home/m1/NVOC/mining/screenrc-miner -dmSL miner /home/m1/NVOC/mining/miners/bminer/latest/bminer -uri ethstratum://cryptatometrader44.ATOMICMINER44:[email protected]:20535 -esm 2 -allpools 1 -allcoins 1 SCREEN -c /home/m1/NVOC/mining/screenrc-miner -dmSL miner /home/m1/NVOC/mining/miners/bminer/latest/bminer -uri ethstratum://cryptatometrader44.ATOMICMINER44:[email protected]:20535 -esm 2 -allpools 1 -allcoins 1
    
Miner output: ./nvOC miner-log
    
    
    SCREEN -c /home/m1/NVOC/mining/screenrc-miner -dmSL miner /home/m1/NVOC/mining/miners/bminer/latest/bminer -uri ethstratum://cryptatometrader44.ATOMICMINER44:[email protected]:20535 -esm 2 -allpools 1 -allcoins 1 SCREEN -c /home/m1/NVOC/mining/screenrc-miner -dmSL miner /home/m1/NVOC/mining/miners/bminer/latest/bminer -uri ethstratum://cryptatometrader44.ATOMICMINER44:[email protected]:20535 -esm 2 -allpools 1 -allcoins 1
  Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:3]) assigned value 1200.

  Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:4]) assigned value 105.

  Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:4]) assigned value 1100.

  Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:5]) assigned value 105.

  Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:5]) assigned value 1150.

  Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:6]) assigned value 105.

  Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:6]) assigned value 1100.

  Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:7]) assigned value 105.

  Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:7]) assigned value 1100.

  Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:8]) assigned value 105.

  Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:8]) assigned value 1100.

  Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:9]) assigned value 105.

  Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:9]) assigned value 1250.

flag provided but not defined: -esm
Bminer: When Crypto-mining Made Fast (v8.0.0-32928c5)

  -api :
        The endpoint (i.e., :) that bminer serves its REST API. The REST API is disabled if it is unspecified.
  -devices comma-separated IDs
        List of comma-separated IDs of the CUDA devices that Bminer should run on. By default bminer runs on all CUDA devices available on the system.
  -dual-intensity int
        The intensity of the secondary mining. Valid values are 0 to 300. Default is 0, which is to tune automatically.
  -dual-subsolver int
        The sub-solver for dual mining. Valid values are 0, 1, 2, 3. Default is -1, which is to tune automatically. (default -1)
  -failover sameHost|immediateNext|random
        Fail-over strategy between multiple pools. Bminer can retry the connection, failover to the next pool or a pool that is randomly chosen in the lists of available pools. (sameHost|immediateNext|random) (default "immediateNext")
  -gpucheck uint
        The interval in seconds that Bminer polls whether the CUDA devices have hung. Set to 0 to disable the checks. (default 90)
  -logfile 
        Append the logs to the file .
  -max-network-failures int
        Number of consecutive attempts that Bminer tries to recover from network failures. Set to -1 to keep on recovering. (default -1)
  -max-temperature int
        Hard limits of the temperature of the GPUs. Bminer slows down itself when the temperautres of the devices exceed the limit. (default 85)
  -no-runtime-info
        Disable runtime information collection for Bminer.
  -no-timestamps
        Suppress timestamps in the logging messages.
  -nofee
        Disable the devfee but it also disables some optimizations.
  -share-check uint
        The interval of seconds that Bminer polls to ensure there are accepted shares. Set to 0 to disable the checks. (default 900)
  -strict-secure
        Verify the certificates of servers when connecting to a SSL-enabled Stratum server.
  -uri ://[:]@:
        A comma-seperated list of URIs that bminer should mine towards. It has the format of ://[:]@:. Please refer to https://www.bminer.me for the specification of the URIs.
  -uri2 ://[:]@:
        A comma-seperated list of URIs that bminer should mine towards secondarily. It has the format of ://[:]@:. Currently Bminer supports blake14r:// or blake2s:// as secondary for ETH mining. Please refer to https://www.bminer.me for the specification of the URIs.
  -watchdog
        Automatically restart to recover from hung GPUs. Bminer exits itself in case of errors if watchdog is disabled. (default true)




Theses options give me some erros because 3main or 0miner add them with Bminer !!!! Huh
Code:
ETH_EXTENSION_ARGUMENTS=""    # add any additional Claymore miner arguments here
If i put them in
Code:
CLAYMORE_OPTS="-esm 2 -allpools 1 -allcoins 1"                                 # Claymore optional arguments. EX: add "-esm 2" for miningpoolhub
at the begenning of 1bash file, there is no pb with BMINER on ETH only
CryptAtomeTrader44
full member
Activity: 340
Merit: 103
It is easier to break an atom than partialities AE
Re: [OS] nvOC easy-to-use Linux Nvidia Mining
June 23, 2018, 10:57:40 AM
#7873
5 / New test on ETH with CLAYMORE miner (no 2nd coin, ETH only) by only changing COIN = ETH
5a/ Restart Xsever
Code:
m1@m1-desktop:~/NVOC/mining$ sudo service lightdm restart

Ok claymore starts normaly

Code:
SCREEN -c /home/m1/NVOC/mining/screenrc-miner -dmSL miner /home/m1/NVOC/mining/miners/claymore/latest/ethdcrminer64 -epool europe.ethash-hub.miningpoolhub.com:20535 -ewal cryptatometrader44.ATOMICMINER44 -epsw x -mode 1 -dbg -1 -esm 2 -allpools 1 -allcoins 1
    
Miner output: ./nvOC miner-log
    
    
    SCREEN -c /home/m1/NVOC/mining/screenrc-miner -dmSL miner /home/m1/NVOC/mining/miners/claymore/latest/ethdcrminer64 -epool europe.ethash-hub.miningpoolhub.com:20535 -ewal cryptatometrader44.ATOMICMINER44 -epsw x -mode 1 -dbg -1 -esm 2 -allpools 1 -allcoins 1
  Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:9]) assigned value 105.

  Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:9]) assigned value 1250.


����������������������������������������������������������������ͻ
�                Claymore's Dual GPU Miner - v11.8               �
�              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             �
����������������������������������������������������������������ͼ

ETH: 1 pool is specified
Main Ethereum pool is europe.ethash-hub.miningpoolhub.com:20535
AMD OpenCL platform not found 
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool, "x" to select GPU
CUDA initializing...

NVIDIA Cards available: 10 
CUDA Driver Version/Runtime Version: 9.1/8.0
GPU #0: GeForce GTX 1070, 8119 MB available, 15 compute units, capability: 6.1  (pci bus 1:0:0)
GPU #1: GeForce GTX 1060 6GB, 6078 MB available, 10 compute units, capability: 6.1  (pci bus 2:0:0)
GPU #2: GeForce GTX 1060 6GB, 6078 MB available, 10 compute units, capability: 6.1  (pci bus 3:0:0)
GPU #3: GeForce GTX 1070, 8119 MB available, 15 compute units, capability: 6.1  (pci bus 5:0:0)
GPU #4: GeForce GTX 1060 6GB, 6078 MB available, 10 compute units, capability: 6.1  (pci bus 6:0:0)
GPU #5: GeForce GTX 1070, 8119 MB available, 15 compute units, capability: 6.1  (pci bus 7:0:0)
GPU #6: GeForce GTX 1070, 8119 MB available, 15 compute units, capability: 6.1  (pci bus 8:0:0)
GPU #7: GeForce GTX 1060 6GB, 6078 MB available, 10 compute units, capability: 6.1  (pci bus 9:0:0)
GPU #8: GeForce GTX 1060 6GB, 6078 MB available, 10 compute units, capability: 6.1  (pci bus 10:0:0)
GPU #9: GeForce GTX 1070, 8119 MB available, 15 compute units, capability: 6.1  (pci bus 11:0:0)
Total cards: 10 

You can use "+" and "-" keys to achieve best ETH speed, see "FINE TUNING" section in Readme for details.

ETH: Stratum - connecting to 'europe.ethash-hub.miningpoolhub.com' <35.156.160.57> port 20535 (unsecure)
ETH: Stratum - Connected (europe.ethash-hub.miningpoolhub.com:20535) (unsecure)
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: miner-proxy stratum mode
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
"-allcoins" option is set, default pools will be used for devfee, check "Readme" file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

Setting DAG epoch #194...
ETH: Authorized
Setting DAG epoch #194 for GPU8
Create GPU buffer for GPU8
Setting DAG epoch #194 for GPU9
Create GPU buffer for GPU9
Setting DAG epoch #194 for GPU0
Create GPU buffer for GPU0
Setting DAG epoch #194 for GPU2
Create GPU buffer for GPU2
Setting DAG epoch #194 for GPU3
Create GPU buffer for GPU3
Setting DAG epoch #194 for GPU1
Create GPU buffer for GPU1
Setting DAG epoch #194 for GPU7
Create GPU buffer for GPU7
Setting DAG epoch #194 for GPU6
Create GPU buffer for GPU6
Setting DAG epoch #194 for GPU5
Create GPU buffer for GPU5
Setting DAG epoch #194 for GPU4
Create GPU buffer for GPU4
GPU9 DAG creation time - 6875 ms
Setting DAG epoch #194 for GPU9 done
GPU3 DAG creation time - 6893 ms
Setting DAG epoch #194 for GPU3 done
GPU5 DAG creation time - 6936 ms
Setting DAG epoch #194 for GPU5 done
GPU6 DAG creation time - 6978 ms
Setting DAG epoch #194 for GPU6 done
GPU0 DAG creation time - 7034 ms
Setting DAG epoch #194 for GPU0 done
ETH: 06/23/18-17:28:32 - New job from europe.ethash-hub.miningpoolhub.com:20535
ETH - Total Speed: 155.634 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 31.309 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 31.259 Mh/s, GPU4 0.000 Mh/s, GPU5 31.067 Mh/s, GPU6 30.591 Mh/s, GPU7 0.000 Mh/s, GPU8 0.000 Mh/s, GPU9 31.408 Mh/s
GPU8 DAG creation time - 9449 ms
Setting DAG epoch #194 for GPU8 done
GPU7 DAG creation time - 9444 ms
Setting DAG epoch #194 for GPU7 done
GPU2 DAG creation time - 10105 ms
Setting DAG epoch #194 for GPU2 done
GPU4 DAG creation time - 10106 ms
Setting DAG epoch #194 for GPU4 done
GPU1 DAG creation time - 10093 ms
Setting DAG epoch #194 for GPU1 done
ETH: 06/23/18-17:28:34 - SHARE FOUND - (GPU 8)
ETH: Share accepted (36 ms)!
GPU0 t=43C fan=55%, GPU1 t=41C fan=55%, GPU2 t=43C fan=55%, GPU3 t=37C fan=55%, GPU4 t=46C fan=55%, GPU5 t=42C fan=55%, GPU6 t=38C fan=55%, GPU7 t=41C fan=55%, GPU8 t=43C fan=55%, GPU9 t=38C fan=55%
ETH: 06/23/18-17:28:52 - New job from europe.ethash-hub.miningpoolhub.com:20535
ETH - Total Speed: 259.299 Mh/s, Total Shares: 1, Rejected: 0, Time: 00:00
ETH: GPU0 31.097 Mh/s, GPU1 19.156 Mh/s, GPU2 19.143 Mh/s, GPU3 31.249 Mh/s, GPU4 19.174 Mh/s, GPU5 31.012 Mh/s, GPU6 30.871 Mh/s, GPU7 23.064 Mh/s, GPU8 23.054 Mh/s, GPU9 31.480 Mh/s
ETH: 06/23/18-17:29:04 - SHARE FOUND - (GPU 0)
ETH: Share accepted (39 ms)!
ETH: 06/23/18-17:29:05 - SHARE FOUND - (GPU 4)
ETH: Share accepted (36 ms)!
GPU0 t=47C fan=55%, GPU1 t=47C fan=55%, GPU2 t=48C fan=55%, GPU3 t=43C fan=55%, GPU4 t=52C fan=55%, GPU5 t=46C fan=55%, GPU6 t=43C fan=55%, GPU7 t=46C fan=55%, GPU8 t=49C fan=55%, GPU9 t=44C fan=55%
ETH: 06/23/18-17:29:15 - SHARE FOUND - (GPU 8)
ETH: Share accepted (36 ms)!
ETH: 06/23/18-17:29:24 - SHARE FOUND - (GPU 2)
ETH: Share accepted (36 ms)!
ETH: 06/23/18-17:29:25 - New job from europe.ethash-hub.miningpoolhub.com:20535
ETH - Total Speed: 258.739 Mh/s, Total Shares: 5, Rejected: 0, Time: 00:01
ETH: GPU0 31.268 Mh/s, GPU1 19.172 Mh/s, GPU2 19.166 Mh/s, GPU3 31.080 Mh/s, GPU4 19.069 Mh/s, GPU5 31.010 Mh/s, GPU6 30.885 Mh/s, GPU7 23.035 Mh/s, GPU8 23.074 Mh/s, GPU9 30.979 Mh/s
ETH: 06/23/18-17:29:31 - New job from europe.ethash-hub.miningpoolhub.com:20535
ETH - Total Speed: 259.365 Mh/s, Total Shares: 5, Rejected: 0, Time: 00:01
ETH: GPU0 31.180 Mh/s, GPU1 19.206 Mh/s, GPU2 19.183 Mh/s, GPU3 31.221 Mh/s, GPU4 19.171 Mh/s, GPU5 31.059 Mh/s, GPU6 30.806 Mh/s, GPU7 23.035 Mh/s, GPU8 23.064 Mh/s, GPU9 31.440 Mh/s
GPU0 t=50C fan=55%, GPU1 t=52C fan=55%, GPU2 t=51C fan=55%, GPU3 t=47C fan=55%, GPU4 t=57C fan=55%, GPU5 t=49C fan=55%, GPU6 t=46C fan=55%, GPU7 t=50C fan=55%, GPU8 t=54C fan=55%, GPU9 t=47C fan=55%
ETH: 06/23/18-17:29:50 - New job from europe.ethash-hub.miningpoolhub.com:20535
ETH - Total Speed: 259.347 Mh/s, Total Shares: 5, Rejected: 0, Time: 00:01
ETH: GPU0 31.195 Mh/s, GPU1 19.179 Mh/s, GPU2 19.174 Mh/s, GPU3 31.264 Mh/s, GPU4 19.210 Mh/s, GPU5 30.987 Mh/s, GPU6 30.850 Mh/s, GPU7 23.049 Mh/s, GPU8 22.990 Mh/s, GPU9 31.449 Mh/s
ETH: 06/23/18-17:30:01 - SHARE FOUND - (GPU 2)
ETH: Share accepted (37 ms)!
ETH: 06/23/18-17:30:08 - SHARE FOUND - (GPU 8)
ETH: Share accepted (36 ms)!
GPU0 t=51C fan=55%, GPU1 t=56C fan=55%, GPU2 t=53C fan=55%, GPU3 t=50C fan=55%, GPU4 t=60C fan=55%, GPU5 t=51C fan=55%, GPU6 t=49C fan=55%, GPU7 t=53C fan=55%, GPU8 t=57C fan=55%, GPU9 t=50C fan=55%
ETH: 06/23/18-17:30:11 - New job from europe.ethash-hub.miningpoolhub.com:20535
ETH - Total Speed: 259.271 Mh/s, Total Shares: 7, Rejected: 0, Time: 00:01
ETH: GPU0 31.236 Mh/s, GPU1 19.194 Mh/s, GPU2 19.170 Mh/s, GPU3 31.195 Mh/s, GPU4 19.160 Mh/s, GPU5 31.013 Mh/s, GPU6 30.777 Mh/s, GPU7 23.017 Mh/s, GPU8 23.043 Mh/s, GPU9 31.466 Mh/s
ETH: 06/23/18-17:30:13 - SHARE FOUND - (GPU 5)
ETH: Share accepted (37 ms)!
ETH: 06/23/18-17:30:18 - New job from europe.ethash-hub.miningpoolhub.com:20535
ETH - Total Speed: 258.857 Mh/s, Total Shares: 8, Rejected: 0, Time: 00:01
ETH: GPU0 30.825 Mh/s, GPU1 19.205 Mh/s, GPU2 19.150 Mh/s, GPU3 31.249 Mh/s, GPU4 19.217 Mh/s, GPU5 31.055 Mh/s, GPU6 30.812 Mh/s, GPU7 23.063 Mh/s, GPU8 23.032 Mh/s, GPU9 31.250 Mh/s
ETH: 06/23/18-17:30:33 - New job from europe.ethash-hub.miningpoolhub.com:20535
CryptAtomeTrader44
full member
Activity: 340
Merit: 103
It is easier to break an atom than partialities AE
Re: [OS] nvOC easy-to-use Linux Nvidia Mining
June 23, 2018, 10:54:48 AM
#7872
I think there is a problem with nvOC_miner_update.sh because i can see some forlders that shouldn't be here
Code:
m1@m1-desktop:~$ pwd
/home/m1
m1@m1-desktop:~$ ls
2unix~      Desktop    KTccminer-cryptonight  SILENTminer        xmr-stak
ANXccminer  Downloads  KXccminer              SPccminer          ZENEMYminer
ASccminer   dstm       MSFTccminer            TPccminer
backups     ethminer   NAccminer              Untitled Document
bminer      gocode     NVOC                   vertminer
claymore    KTccminer  nvoc_logs              www
CryptAtomeTrader44
full member
Activity: 340
Merit: 103
It is easier to break an atom than partialities AE
Re: [OS] nvOC easy-to-use Linux Nvidia Mining
June 23, 2018, 10:22:47 AM
#7871
On Windows 7, write the image via HDDrawcopy on another disk then connect to my RIG, then copy my 1bash currently used on the 19.2.0 via another profile in the terminal
1st test:
1 / My 1bash was not copied to the system at first boot
2 / The autoexpand was not done at the first boot
3 / The second boot did not start the system
4 / The 3rd boot shows me unrecoverable file system error

Code:
nvOC v0019-2.1 - Community Release

 nvOC v0019-2.1 - Community Release 


Cannot make directory '/var/run/screen': Permission denied


rig IP: 192.168.1.144


rig MAC: b8:97:5a:f7:33:9e  


01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
02:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
05:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
06:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
07:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
09:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
0a:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
0b:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)


Sat Jun 23 05:41:31 2018       
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 390.67                 Driver Version: 390.67                    |
|-------------------------------+----------------------+----------------------+
| GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
|===============================+======================+======================|
|   0  GeForce GTX 1070    Off  | 00000000:01:00.0  On |                  N/A |
|  0%   51C    P8     9W / 151W |    125MiB /  8119MiB |      4%      Default |
+-------------------------------+----------------------+----------------------+
|   1  GeForce GTX 106...  Off  | 00000000:02:00.0 Off |                  N/A |
| 37%   51C    P8     8W / 180W |      9MiB /  6078MiB |      4%      Default |
+-------------------------------+----------------------+----------------------+
|   2  GeForce GTX 106...  Off  | 00000000:03:00.0 Off |                  N/A |
| 25%   45C    P8    10W / 180W |      9MiB /  6078MiB |      4%      Default |
+-------------------------------+----------------------+----------------------+
|   3  GeForce GTX 1070    Off  | 00000000:05:00.0 Off |                  N/A |
|  0%   47C    P8     6W / 151W |      9MiB /  8119MiB |      2%      Default |
+-------------------------------+----------------------+----------------------+
|   4  GeForce GTX 106...  Off  | 00000000:06:00.0 Off |                  N/A |
| 38%   53C    P8     7W / 180W |      9MiB /  6078MiB |      4%      Default |
+-------------------------------+----------------------+----------------------+
|   5  GeForce GTX 1070    Off  | 00000000:07:00.0 Off |                  N/A |
|  0%   44C    P8     5W / 151W |      9MiB /  8119MiB |      1%      Default |
+-------------------------------+----------------------+----------------------+
|   6  GeForce GTX 1070    Off  | 00000000:08:00.0 Off |                  N/A |
|  0%   50C    P8     7W / 151W |      9MiB /  8119MiB |      2%      Default |
+-------------------------------+----------------------+----------------------+
|   7  GeForce GTX 106...  Off  | 00000000:09:00.0 Off |                  N/A |
| 27%   46C    P8     6W / 180W |      9MiB /  6078MiB |      4%      Default |
+-------------------------------+----------------------+----------------------+
|   8  GeForce GTX 106...  Off  | 00000000:0A:00.0 Off |                  N/A |
| 33%   50C    P8     6W / 180W |      9MiB /  6078MiB |      3%      Default |
+-------------------------------+----------------------+----------------------+
|   9  GeForce GTX 1070    Off  | 00000000:0B:00.0 Off |                  N/A |
|  0%   47C    P8     6W / 151W |      9MiB /  8119MiB |      2%      Default |
+-------------------------------+----------------------+----------------------+
                                                                               
+-----------------------------------------------------------------------------+
| Processes:                                                       GPU Memory |
|  GPU       PID   Type   Process name                             Usage      |
|=============================================================================|
|    0      1276      G   /usr/lib/xorg/Xorg                            94MiB |
|    0      2072      G   compiz                                        28MiB |
|    1      1276      G   /usr/lib/xorg/Xorg                             6MiB |
|    2      1276      G   /usr/lib/xorg/Xorg                             6MiB |
|    3      1276      G   /usr/lib/xorg/Xorg                             6MiB |
|    4      1276      G   /usr/lib/xorg/Xorg                             6MiB |
|    5      1276      G   /usr/lib/xorg/Xorg                             6MiB |
|    6      1276      G   /usr/lib/xorg/Xorg                             6MiB |
|    7      1276      G   /usr/lib/xorg/Xorg                             6MiB |
|    8      1276      G   /usr/lib/xorg/Xorg                             6MiB |
|    9      1276      G   /usr/lib/xorg/Xorg                             6MiB |
+-----------------------------------------------------------------------------+


  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:0]) assigned value 100.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:1]) assigned value 100.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:2]) assigned value 100.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:3]) assigned value 100.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:4]) assigned value 100.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:5]) assigned value 100.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:6]) assigned value 100.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:7]) assigned value 100.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:8]) assigned value 100.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:9]) assigned value 100.

Power limit for GPU 00000000:01:00.0 was set to 75.00 W from 151.00 W.

Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.

Provided power limit 75.00 W is not a valid power limit which should be between 90.00 W and 200.00 W for GPU 00000000:02:00.0
Terminating early due to previous errors.

LAUNCHING:  MINER TEMPCONTROL
Cannot make directory '/var/run/screen': Permission denied

process in screen temp, guake terminal Tab (f12), 'nvOC temp-log'

    
    
     Auto Start Miner is set to NO 
    
     Miner is not starting 
    
    

  Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:0]) assigned value 100.

  Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:0]) assigned value 100.

  Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:1]) assigned value 100.

  Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:1]) assigned value 100.

  Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:2]) assigned value 100.

  Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:2]) assigned value 100.

  Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:3]) assigned value 100.

  Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:3]) assigned value 100.

  Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:4]) assigned value 100.

  Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:4]) assigned value 100.

  Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:5]) assigned value 100.

  Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:5]) assigned value 100.

  Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:6]) assigned value 100.

  Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:6]) assigned value 100.

  Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:7]) assigned value 100.

  Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:7]) assigned value 100.

  Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:8]) assigned value 100.

  Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:8]) assigned value 100.

  Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:9]) assigned value 100.

  Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:9]) assigned value 100.




2nd test:
On Windows 7, write the image via HDDrawcopy on another disk then connect to my RIG, then copy my 1bash currently used on the 19.2.0 via another profile in the terminal:

1 / the system booted correctly and executed the first boot script successfully. The autoexpand ran correctly and my 1 bash was copied, then the system rebooted
2 / the script 3main read some variables of my 1 bash but does not seem able to determine which coin / algorithm it should use
3 / The 3main script prevented the watchdog script from starting and he refused to start the minning. the system remained started, the tabs in guakes are started but nothing happens.

Code:
nvOC v0019-2.1 - Community Release

 nvOC v0019-2.1 - Community Release 


No Sockets found in /var/run/screen/S-m1.



rig IP: 192.168.1.144


rig MAC: b8:97:5a:f7:33:9e  


01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
02:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
05:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
06:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
07:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
09:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
0a:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
0b:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)


Sat Jun 23 06:08:35 2018       
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 390.67                 Driver Version: 390.67                    |
|-------------------------------+----------------------+----------------------+
| GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
|===============================+======================+======================|
|   0  GeForce GTX 1070    Off  | 00000000:01:00.0  On |                  N/A |
|  0%   48C    P8     8W / 151W |    124MiB /  8119MiB |      4%      Default |
+-------------------------------+----------------------+----------------------+
|   1  GeForce GTX 106...  Off  | 00000000:02:00.0 Off |                  N/A |
|  0%   36C    P8     6W / 180W |      9MiB /  6078MiB |      4%      Default |
+-------------------------------+----------------------+----------------------+
|   2  GeForce GTX 106...  Off  | 00000000:03:00.0 Off |                  N/A |
|  0%   37C    P8    10W / 180W |      9MiB /  6078MiB |      4%      Default |
+-------------------------------+----------------------+----------------------+
|   3  GeForce GTX 1070    Off  | 00000000:05:00.0 Off |                  N/A |
|  0%   34C    P8     5W / 151W |      9MiB /  8119MiB |      2%      Default |
+-------------------------------+----------------------+----------------------+
|   4  GeForce GTX 106...  Off  | 00000000:06:00.0 Off |                  N/A |
|  0%   37C    P8     7W / 180W |      9MiB /  6078MiB |      1%      Default |
+-------------------------------+----------------------+----------------------+
|   5  GeForce GTX 1070    Off  | 00000000:07:00.0 Off |                  N/A |
|  0%   37C    P8     5W / 151W |      9MiB /  8119MiB |      1%      Default |
+-------------------------------+----------------------+----------------------+
|   6  GeForce GTX 1070    Off  | 00000000:08:00.0 Off |                  N/A |
|  0%   40C    P8     6W / 151W |      9MiB /  8119MiB |      1%      Default |
+-------------------------------+----------------------+----------------------+
|   7  GeForce GTX 106...  Off  | 00000000:09:00.0 Off |                  N/A |
|  0%   34C    P8     6W / 180W |      9MiB /  6078MiB |      2%      Default |
+-------------------------------+----------------------+----------------------+
|   8  GeForce GTX 106...  Off  | 00000000:0A:00.0 Off |                  N/A |
|  0%   35C    P8     6W / 180W |      9MiB /  6078MiB |      1%      Default |
+-------------------------------+----------------------+----------------------+
|   9  GeForce GTX 1070    Off  | 00000000:0B:00.0 Off |                  N/A |
|  0%   37C    P8     5W / 151W |      9MiB /  8119MiB |      1%      Default |
+-------------------------------+----------------------+----------------------+
                                                                               
+-----------------------------------------------------------------------------+
| Processes:                                                       GPU Memory |
|  GPU       PID   Type   Process name                             Usage      |
|=============================================================================|
|    0      1406      G   /usr/lib/xorg/Xorg                            93MiB |
|    0      2147      G   compiz                                        28MiB |
|    1      1406      G   /usr/lib/xorg/Xorg                             6MiB |
|    2      1406      G   /usr/lib/xorg/Xorg                             6MiB |
|    3      1406      G   /usr/lib/xorg/Xorg                             6MiB |
|    4      1406      G   /usr/lib/xorg/Xorg                             6MiB |
|    5      1406      G   /usr/lib/xorg/Xorg                             6MiB |
|    6      1406      G   /usr/lib/xorg/Xorg                             6MiB |
|    7      1406      G   /usr/lib/xorg/Xorg                             6MiB |
|    8      1406      G   /usr/lib/xorg/Xorg                             6MiB |
|    9      1406      G   /usr/lib/xorg/Xorg                             6MiB |
+-----------------------------------------------------------------------------+


  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:0]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:1]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:2]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:3]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:4]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:5]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:6]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:7]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:8]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:9]) assigned value 0.

Power limit for GPU 00000000:01:00.0 was set to 114.00 W from 151.00 W.

Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.

All done.
Power limit for GPU 00000000:02:00.0 was set to 114.00 W from 180.00 W.

Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.

All done.
Power limit for GPU 00000000:03:00.0 was set to 114.00 W from 180.00 W.

Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.

All done.
Power limit for GPU 00000000:05:00.0 was set to 114.00 W from 151.00 W.

Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.

All done.
Power limit for GPU 00000000:06:00.0 was set to 114.00 W from 180.00 W.

Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.

All done.
Power limit for GPU 00000000:07:00.0 was set to 114.00 W from 151.00 W.

Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.

All done.
Power limit for GPU 00000000:08:00.0 was set to 100.00 W from 151.00 W.

Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.

All done.
Power limit for GPU 00000000:09:00.0 was set to 114.00 W from 180.00 W.

Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.

All done.
Power limit for GPU 00000000:0A:00.0 was set to 114.00 W from 180.00 W.

Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.

All done.
Power limit for GPU 00000000:0B:00.0 was set to 114.00 W from 151.00 W.

Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.

All done.

LAUNCHING:  MINER TEMPCONTROL

process in screen temp, guake terminal Tab (f12), 'nvOC temp-log'


LAUNCHING:  WTM AUTO SWITCH 


process in screen wtm, guake terminal Tab (f12)
Auto Start Miner Set to YES


  Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:0]) assigned value 105.

  Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:0]) assigned value 1200.

  Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:1]) assigned value 105.

  Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:1]) assigned value 1100.

  Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:2]) assigned value 105.

  Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:2]) assigned value 1100.

  Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:3]) assigned value 105.

LAUNCHING:  MINER WATCHDOG (LOCAL)

process in screen wdog, guake terminal Tab (f12), 'nvOC wdog-log'
  Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:3]) assigned value 1200.

  Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:4]) assigned value 105.

  Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:4]) assigned value 1100.

  Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:5]) assigned value 105.

  Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:5]) assigned value 1150.

  Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:6]) assigned value 105.

  Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:6]) assigned value 1100.

  Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:7]) assigned value 105.

  Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:7]) assigned value 1100.

  Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:8]) assigned value 105.

  Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:8]) assigned value 1100.



[WARNING] - Attempting to launch miner for an undefined algo

LAUNCHING:  MINER
    
  Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:9]) assigned value 105.


COIN/ALGO not found, Check your settings
Miner not started, Stopping watchdog
    
    
    
Miner output: ./nvOC miner-log
    
    
    
  Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:9]) assigned value 1250.


3rd test
On Windows 7, write the image via HDDrawcopy on another disk then connect to my RIG, then change the 1bash testing 19-2.1beta1 to match it provided with the image:
1 / The first automated steps mentioned above take place properly, even if the machian restarts
2 / After restarting, 3main starts the mining on FTC, then turns in loop, then I replace FTC by KMD by hand in the 1bash, and 3main launches well DSTM on KMD
3 / WTM_SWITCHING tells me that the corner to mine is ETH! so there is a pb with WTM_SWITCHING
4 / Minerinfo works (but I will change the colors at my convenience later)

4th test
1 / Minning in FTC Manual: Does not work
2 / I kill all the screens (pkill -f screen) and I run the command in ssh via putty:
I get:
Code:
/home/m1/NVOC/mining/miners/KTccminer/ccminer -a neoscrypt -o stratum+tcp://hub.miningpoolhub.com:20510 -u cryptatometrader44.ATOMICMINER44 -p x -i 17
ccminer 8.20-KlausT (64bit) for nVidia GPUs
Compiled with GCC 5.4 using Nvidia CUDA Toolkit 8.0

Based on pooler cpuminer 2.3.2 and the tpruvot@github fork
CUDA support by Christian Buchner, Christian H. and DJM34
Includes optimizations implemented by sp-hash, klaust, tpruvot and tsiv.

Illegal instruction

I guess the software is to recompile, so I restart the KTccminer compilation via the papampi script: ./NVOC/mining/miners/nvOC_miner_update.sh
Alas, the compilation script in the new image does not work!

Code:
bn.h openssl fixed for compiling miners

Select miners to compile (multiple comma separated values: 1,6,7)
1 - ASccminer
2 - KTccminer
3 - KTccminer-cryptonight
4 - KXccminer
5 - NAccminer
6 - SPccminer
7 - TPccminer
8 - vertminer
9 - ANXccminer
R - MSFTccminer (RVN)
X - xmr-stak

Do your Choice: [A]LL [1] [2] [3] [4] [5] [6] [7] [8] [9] [R] [X] [E]xit: 2
2
Compiling KlausT ccminer
 This could take a while ...
fatal: Not a git repository (or any of the parent directories): .git
./NVOC/mining/miners/nvOC_miner_update.sh: line 404: cd: /home/m1/KTccminer/src: No such file or directory
bash: /home/m1/KTccminer/src/autogen.sh: No such file or directory
bash: /home/m1/KTccminer/src/configure: No such file or directory
bash: /home/m1/KTccminer/src/build.sh: No such file or directory
cp: cannot stat '/home/m1/KTccminer/src/ccminer': No such file or directory

Finished compiling KlausT ccminer
Restart miner

I manually start the compilation in the KTccminer software folders:

Code:
m1@m1-desktop:~/NVOC/mining/miners$ ls KTccminer
ccminer  KTccminer.tar.xz  src  version
m1@m1-desktop:~/NVOC/mining/miners$ ls
ANXccminer  ethminer               NAccminer             TPccminer
ASccminer   KTccminer              nvOC_miner_update.sh  vertminer
bminer      KTccminer-cryptonight  README.md             xmr-stak
claymore    KXccminer              SILENTminer           ZENEMYminer
dstm        MSFTccminer            SPccminer
m1@m1-desktop:~/NVOC/mining/miners$ cd  KTccminer
m1@m1-desktop:~/NVOC/mining/miners/KTccminer$ ls
ccminer  KTccminer.tar.xz  src  version
m1@m1-desktop:~/NVOC/mining/miners/KTccminer$ cd src/
m1@m1-desktop:~/NVOC/mining/miners/KTccminer/src$ ls
m1@m1-desktop:~/NVOC/mining/miners/KTccminer/src$

Alas, again, as I had already reported in one of my previous posts, the sources are not available on the RIG!
Yet at the launch of the software update script minning, he did check between the repository and those present on the RIG. Which in my opinion means that the sources of the software provided in the update script are corrupt, missing or missing.
I therefore insist once again that the recompilation of some minning software is systematic or mandatory. Especially that of KLAUST for neoscrypt

I had to make a
Code:
chmod a + x nvOC
in /home/m1/NVOC/minning
to mail you this report. And I see that the tool has expanded other functions that I did not know before this beta2.
Code:

Software info:
Report ver    :  v0019-2.0.002
nvOC (1bash)  :  nvOC v0019-2.1 - Community Release
nvOC (3main)  :  nvOC v0019-2.1 - Community Release
1bash ver     :  v0019-2.1.0026
3main ver     :  v0019-2.1.0022
5watchdog ver :  v0019-2.0.018
6tempcontrol v:  v0019-2.1.0006
wtm switch ver:  v0019-2.0.0021
Kernel        :  4.4.0-128-generic
OS            :  Ubuntu 16.04.4 LTS
System        :  (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.9)
nvidia driver :  390.67

Hardware info:
Motherboard   :  BIOSTAR Group TB250-BTC PRO
BIOS ver.     :  5.12 06/07/2017
CPU Model     :  Celeron(R) CPU G3900 @ 2.80GHz
CPU Cores     :  2 (Cores + Threads)
Mem Total     :         4011868 kB
Mem Free      :         2351776 kB
Swap Total    :               0 kB
Swap Free     :               0 kB
  Ethernet      :  Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)

HDD and Partion info:
NAME     SIZE FSTYPE TYPE ROTA HOTPLUG TRAN VENDOR  MODEL      REV MOUNTPOINT
sda    465.8G        disk    1       1 usb  ATA     WDC WD500 1A01
├─sda1     9M vfat   part    1       1                             /media/m1/12D
└─sda2 465.8G ext4   part    1       1                             /

VGA info:
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
02:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
05:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
06:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
07:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
09:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
0a:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
0b:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)

1bash settings:
1bash version .............: v0019-2.1.0026
LOCAL or REMOTE ...........: LOCAL
TEAMVIEWER started ........: NO
SSH daemon started ........: YES
SLOW_USB_KEY_MODE .........: NO
SRR .......................: NO

Watchdog ..................: YES
SYSRQ Reboot ..............: YES
Watchdog Cycle ............: 15
GPU Utilization Threshold .: 70
Alternate Pool ............: NO

Temp Control ..............: YES
MANUAL_FAN ................: NO
TARGET_TEMP ...............: 70
__FAN_ADJUST ..............: 3
POWER_ADJUST ..............: 3
ALLOWED_TEMP_DIFF .........: 2
RESTORE_POWER_LIMIT .......: 85
MINIMAL_FAN_SPEED .........: 55
MAXIMAL_FAN_SPEED .........: 100

CLEAR_LOGS_ON_BOOT ........: NO
AUTO_UPDATE ...............: STABLE
AUTO_REBOOT ...............: NO
_Parallax_MODE (upPaste)...: NO

TELEGRAM_MESSAGES .: YES
TELEGRAM_ALERTS ...: YES
TELEGRAM_TYPE .............: papampi
TELEGRAM_TIMEOUT_IN_MINUTES: 60
TELEGRAM_CHATID ...........: CHATID_NOT_SHOWN
TELEGRAM_APIKEY ...........: APIKEY_NOT_SHOWN

HEADLESS MODE:.............: NO
GPUPowerMizerMode_Adjust...: NO
ETH Pill ..................: NO

POWERLIMIT MODE ...........: GPU_SPECIFIC
GPU0 Power Limit ..........: 114
GPU1 Power Limit ..........: 114
GPU2 Power Limit ..........: 114
GPU3 Power Limit ..........: 114
GPU4 Power Limit ..........: 114
GPU5 Power Limit ..........: 114
GPU6 Power Limit ..........: 100
GPU7 Power Limit ..........: 114
GPU8 Power Limit ..........: 114
GPU9 Power Limit ..........: 114
OVERCLOCK MODE ............: GPU_SPECIFIC
GPU0 Core Overclock ........: 105
GPU0 Memory Overclock ......: 1200
GPU1 Core Overclock ........: 105
GPU1 Memory Overclock ......: 1100
GPU2 Core Overclock ........: 105
GPU2 Memory Overclock ......: 1100
GPU3 Core Overclock ........: 105
GPU3 Memory Overclock ......: 1200
GPU4 Core Overclock ........: 105
GPU4 Memory Overclock ......: 1100
GPU5 Core Overclock ........: 105
GPU5 Memory Overclock ......: 1150
GPU6 Core Overclock ........: 105
GPU6 Memory Overclock ......: 1100
GPU7 Core Overclock ........: 105
GPU7 Memory Overclock ......: 1100
GPU8 Core Overclock ........: 105
GPU8 Memory Overclock ......: 1100
GPU9 Core Overclock ........: 105
GPU9 Memory Overclock ......: 1250

GLOBAL WORKERNAME .........: YES
AUTO WORKERNAME ...........: CUSTOM
WORKERNAME ................: ATOMICMINER44
plusCPU ...................: NO

COIN ......................: FTC
ALGO ......................: NEOSCRYPT
MINER .....................: KTccminer
FTC WORKER ................: ATOMICMINER44
FTC ADDRESS ...............: cryptato...
FTC POOL ..................: hub.miningpoolhub.com
FTC PORT ..................: 20510
NEOSCRYPT INTENSITY ..........: 17

fk2
jr. member
Activity: 67
Merit: 2
Re: [OS] nvOC easy-to-use Linux Nvidia Mining
June 23, 2018, 07:05:47 AM
#7870
Hi, its fk1, someone hacked my bct account. I already complained about my rig not auto rebooting anymore since update.
Now I have a new rig, freshly installed nvOC 0019v2.0 image, it doesnt start anything anymore. wether auto reboot, or bash 2unix bash 3main, nothing.

I also tried 2.1 clone and 1.4 image to 2.0. absolutely clueless what the problem is
papampi
full member
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
Re: [OS] nvOC easy-to-use Linux Nvidia Mining
June 23, 2018, 01:30:22 AM
#7869
Quote from: CryptAtomeTrader44 on June 22, 2018, 07:28:21 PM
Quote from: LuKePicci on June 15, 2018, 05:31:17 AM
Quote from: CryptAtomeTrader44 on June 13, 2018, 05:44:37 PM

When do you plan to provide a new ISO file ? How much time testing ?


Thank you for all your feedbacks, please test again the miners update procedure, we did some chenges recently, in case of any issue with the testing version please report on github, to avoid confusing people here. As you see lot of things changed, and the testing stage is just at the beginning. The more people test the new beta version, the more we feel confident in declaring it as ready. Please remember to always attach a report anytime you report issues because the report contains version info needed to understand which test version you are running at that time.

A few pages ago, we had discussed updating to a newer version of ubuntu that was to be released last spring. What about these projects?

As I wrote, I think Xubuntu could do the trick and be a little lighter. I know that leenoox also wanted to propose many other systems even more minimalist but I do not know if he finally gave up his idea to lighten the image of nvOC.

You can see my miner report in a recent message above.

translated by google translate


Waiting for ubuntu 18.04.1 then will release an nvOC with it.
papampi
full member
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
Re: [OS] nvOC easy-to-use Linux Nvidia Mining
June 23, 2018, 01:29:15 AM
#7868
CryptAtomeTrader44
full member
Activity: 340
Merit: 103
It is easier to break an atom than partialities AE
Re: [OS] nvOC easy-to-use Linux Nvidia Mining
June 22, 2018, 07:35:53 PM
#7867
Quote from: papampi on June 20, 2018, 01:39:24 AM
nvOC 19-2.1 beta image, Ubuntu 16.04, Nvidia 390, Date 180619

Thanks to all contributors.

This is a beta image and not fully tested yet.
Please post bugs, errors,questions and any problems here in forum or GitHub issues.

nvOC_V19-2.1beta_U16.04_N390_D180619.img sha256:
cb607c8e028d3bc0a0e274c34b4e0def0c71330053f0c8328120a717e0029938

nvOC_V19-2.1beta_U16.04_N390_D180619.img.zip sha256:
7700dfdfc1cabab8a1dd9816a6322d6653c89943cb63afa59e79f88cfe14a6a9

Zip download size 3.6 Gb, Image size 9 Gb
Auto expand to fill all the volume at first boot.

Download link

Write the image with your favourite image writer of choice
Browse to the small fat partition you can see on the drive, edit 1bash.
Auto start miner is set to no, change it when you are sure all settings are correct.
Attach the SSD/USB/HDD to rig and boot up.
USB install not recommended for mining, only use it for testing.


Good luck.
Keep calm and carry on mining.

I'm downloading it now. I will install tomorrow in place of 19.2.0 with another terminal profile that i'm actually using.

Well, but if not, when will donald.T stop tweeting his bullshit and make big falls in the crytpo market Huh grrrrrrrrr
Quickly, quickly, find a clever little who "hack" his twitter account and make him say anything! Arf, no, on the contrary make him say something intelligent, otherwise no one will notice ah ah ah pfffffff It pisses us all well

translated by google translate
CryptAtomeTrader44
full member
Activity: 340
Merit: 103
It is easier to break an atom than partialities AE
Re: [OS] nvOC easy-to-use Linux Nvidia Mining
June 22, 2018, 07:28:21 PM
#7866
Quote from: LuKePicci on June 15, 2018, 05:31:17 AM
Quote from: CryptAtomeTrader44 on June 13, 2018, 05:44:37 PM

When do you plan to provide a new ISO file ? How much time testing ?


Thank you for all your feedbacks, please test again the miners update procedure, we did some chenges recently, in case of any issue with the testing version please report on github, to avoid confusing people here. As you see lot of things changed, and the testing stage is just at the beginning. The more people test the new beta version, the more we feel confident in declaring it as ready. Please remember to always attach a report anytime you report issues because the report contains version info needed to understand which test version you are running at that time.

A few pages ago, we had discussed updating to a newer version of ubuntu that was to be released last spring. What about these projects?

As I wrote, I think Xubuntu could do the trick and be a little lighter. I know that leenoox also wanted to propose many other systems even more minimalist but I do not know if he finally gave up his idea to lighten the image of nvOC.

You can see my miner report in a recent message above.

translated by google translate
CryptAtomeTrader44
full member
Activity: 340
Merit: 103
It is easier to break an atom than partialities AE
Re: [OS] nvOC easy-to-use Linux Nvidia Mining
June 22, 2018, 07:00:46 PM
#7865
I'm trying desperately to connect my vnc to my local minor but nothing to do, ulraVNC told me that the protocol is not supported and other software tell me that the connection is refused!

I stopped teamviwer because he asked me to buy a professional license. Note that their site shows that they determine themselves whether it is a pro or personal use ... So, they only decide whether the user cheats or not. Here's a method to sneak up on it, a little more money when shareholders claim additional turnover (and the dividends that come with it). Not really reasonable all that.

I will try on the new version tomorrow.

translated by google translate
CryptAtomeTrader44
full member
Activity: 340
Merit: 103
It is easier to break an atom than partialities AE
Re: [OS] nvOC easy-to-use Linux Nvidia Mining
June 22, 2018, 06:47:53 PM
#7864
Quote from: papampi on June 14, 2018, 12:28:56 AM
Quote from: CryptAtomeTrader44 on June 13, 2018, 05:55:45 PM

I just changed ETHASH_MINER="CLAYMORE"     to ETHASH_MINER="BMINER"

What's the problem ?


It looks OK for Bminer minning EQUIHASH. Even, the first start on ZCL had the same problem than above with ETHASH

No idea, ask in bminer thread.
But something strange, why it shows eth hashrate as sols/s?

We talked and tested NICE_ in GitHub issue 88
Please post problems with nice in GitHub so we can follow and fix (if there are any)

Edit:
Did you set correct bminer protocol for ethereum in 1bash?

You were right for the definition of the BMINER protocol. I defined ethstratum and everything is back in order, including for ETC which has made a nice comeback in the WTM rankings and the markets in recent days.

On the other hand, I did not understand how to make Claymore fight the minning switching between ETH (on MPH) and NICE_ETHASH (On Nicehash). I systematically have this blob3 error. and I think it comes from these prameters prese, born on their support web page

"EthDcrMiner64.exe -epool stratum + tcp: //daggerhashimoto.eu.nicehash.com: 3353 -ewal YOUR_BTC_ADDRESS -epsw x-esm 3 -allpools 1"

To min out ETh on MPH, the -esm option is 2 and not 3.
I note that Bminer does not seem to be affected by this option but that the software is only planting every 3-5 minutes on nice_ethash.

I have not yet understood if I can and / or should use the specificity of BMINER and the pill enlargment. But after a few days of minning, if what is displayed by Bminer is accurate in terms of hashing speed, then it is as fast as claymore and slightly more stable.

EDIT : minerinfo is dead and i don't understand whey or how to relaunch it.

minerinfo seems to be dysfunctional and I can not consult anything locally :-(

translated by google translate


      Report generator v0019-2.0.002 by leenoox


Code:

Software info:
Report ver    :  v0019-2.0.002
nvOC (1bash)  :  nvOC v0019-2.1 - Community Release
nvOC (3main)  :  nvOC v0019-2.1 - Community Release
1bash ver     :  v0019-2.1.0026
3main ver     :  v0019-2.1.0021
5watchdog ver :  v0019-2.0.018
6tempcontrol v:  v0019-2.1.0006
wtm switch ver:  v0019-2.0.0021
Kernel        :  4.4.0-97-generic
OS            :  Ubuntu 16.04.3 LTS
System        :  (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.4)
nvidia driver :  387.34

Hardware info:
Motherboard   :  BIOSTAR Group TB250-BTC PRO
BIOS ver.     :  5.12 06/07/2017
CPU Model     :  Celeron(R) CPU G3900 @ 2.80GHz
CPU Cores     :  2 (Cores + Threads)
Mem Total     :         4011968 kB
Mem Free      :          759176 kB
Swap Total    :         4194300 kB
Swap Free     :         4194300 kB
  Ethernet      :  Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)

HDD and Partion info:
NAME     SIZE FSTYPE TYPE ROTA HOTPLUG TRAN VENDOR  MODEL      REV MOUNTPOINT
sda    186.3G        disk    1       1 usb  ATA     Hitachi H C54P
├─sda1     9M vfat   part    1       1                             /media/m1/12D
├─sda2    20G ext4   part    1       1                             /
└─sda3     4G swap   part    1       1                             [SWAP]

VGA info:
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
02:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
05:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
06:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
07:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
09:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
0a:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
0b:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)

1bash settings:
1bash version .............: v0019-2.1.0026
LOCAL or REMOTE ...........: LOCAL
TEAMVIEWER started ........: NO
SSH daemon started ........: YES
SLOW_USB_KEY_MODE .........: NO
SRR .......................: NO

Watchdog ..................: YES
SYSRQ Reboot ..............: YES
Watchdog Cycle ............: 15
GPU Utilization Threshold .: 70
Alternate Pool ............: NO

Temp Control ..............: YES
MANUAL_FAN ................: NO
TARGET_TEMP ...............: 70
__FAN_ADJUST ..............: 3
POWER_ADJUST ..............: 3
ALLOWED_TEMP_DIFF .........: 2
RESTORE_POWER_LIMIT .......: 85
MINIMAL_FAN_SPEED .........: 55
MAXIMAL_FAN_SPEED .........: 100

CLEAR_LOGS_ON_BOOT ........: NO
AUTO_UPDATE ...............: STABLE
AUTO_REBOOT ...............: NO
_Parallax_MODE (upPaste)...: NO

TELEGRAM_MESSAGES .: YES
TELEGRAM_ALERTS ...: YES
TELEGRAM_TYPE .............: papampi
TELEGRAM_TIMEOUT_IN_MINUTES: 60
TELEGRAM_CHATID ...........: CHATID_NOT_SHOWN
TELEGRAM_APIKEY ...........: APIKEY_NOT_SHOWN

HEADLESS MODE:.............: NO
GPUPowerMizerMode_Adjust...: NO
ETH Pill ..................: NO

POWERLIMIT MODE ...........: GPU_SPECIFIC
GPU0 Power Limit ..........: 112
GPU1 Power Limit ..........: 114
GPU2 Power Limit ..........: 114
GPU3 Power Limit ..........: 114
GPU4 Power Limit ..........: 114
GPU5 Power Limit ..........: 114
GPU6 Power Limit ..........: 100
GPU7 Power Limit ..........: 114
GPU8 Power Limit ..........: 114
GPU9 Power Limit ..........: 114
OVERCLOCK MODE ............: GPU_SPECIFIC
GPU0 Core Overclock ........: 106
GPU0 Memory Overclock ......: 1200
GPU1 Core Overclock ........: 106
GPU1 Memory Overclock ......: 1100
GPU2 Core Overclock ........: 106
GPU2 Memory Overclock ......: 1100
GPU3 Core Overclock ........: 106
GPU3 Memory Overclock ......: 1100
GPU4 Core Overclock ........: 106
GPU4 Memory Overclock ......: 1100
GPU5 Core Overclock ........: 106
GPU5 Memory Overclock ......: 1100
GPU6 Core Overclock ........: 106
GPU6 Memory Overclock ......: 1100
GPU7 Core Overclock ........: 106
GPU7 Memory Overclock ......: 1200
GPU8 Core Overclock ........: 106
GPU8 Memory Overclock ......: 1200
GPU9 Core Overclock ........: 106
GPU9 Memory Overclock ......: 1300

GLOBAL WORKERNAME .........: YES
AUTO WORKERNAME ...........: CUSTOM
WORKERNAME ................: MINER44
plusCPU ...................: NO

COIN ......................: NICE_ETHASH
ALGO ......................: ETHASH
MINER .....................: BMINER
NICE_ETHASH WORKER ................: MINER44
NICE_ETHASH ADDRESS ...............: ...
NICE_ETHASH POOL ..................: daggerhashimoto.usa.nicehash.com
NICE_ETHASH PORT ..................: 3353
ETHASH INTENSITY ..........:



papampi
full member
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
Re: [OS] nvOC easy-to-use Linux Nvidia Mining
June 20, 2018, 01:39:24 AM
#7863
nvOC 19-2.1 beta image, Ubuntu 16.04, Nvidia 390, Date 180619

Thanks to all contributors.

This is a beta image and not fully tested yet.
Please post bugs, errors,questions and any problems here in forum or GitHub issues.

nvOC_V19-2.1beta_U16.04_N390_D180619.img sha256:
cb607c8e028d3bc0a0e274c34b4e0def0c71330053f0c8328120a717e0029938

nvOC_V19-2.1beta_U16.04_N390_D180619.img.zip sha256:
7700dfdfc1cabab8a1dd9816a6322d6653c89943cb63afa59e79f88cfe14a6a9

Zip download size 3.6 Gb, Image size 9 Gb
Auto expand to fill all the volume at first boot.

Download link

Write the image with your favourite image writer of choice
Browse to the small fat partition you can see on the drive, edit 1bash.
Auto start miner is set to no, change it when you are sure all settings are correct.
Attach the SSD/USB/HDD to rig and boot up.
USB install not recommended for mining, only use it for testing.


Good luck.
Keep calm and carry on mining.
LuKePicci
jr. member
Activity: 128
Merit: 1
Re: [OS] nvOC easy-to-use Linux Nvidia Mining
June 15, 2018, 05:31:17 AM
#7862
Quote from: CryptAtomeTrader44 on June 13, 2018, 05:44:37 PM

When do you plan to provide a new ISO file ? How much time testing ?


Thank you for all your feedbacks, please test again the miners update procedure, we did some chenges recently, in case of any issue with the testing version please report on github, to avoid confusing people here. As you see lot of things changed, and the testing stage is just at the beginning. The more people test the new beta version, the more we feel confident in declaring it as ready. Please remember to always attach a report anytime you report issues because the report contains version info needed to understand which test version you are running at that time.
papampi
full member
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
Re: [OS] nvOC easy-to-use Linux Nvidia Mining
June 14, 2018, 12:28:56 AM
#7861
papampi
full member
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
Re: [OS] nvOC easy-to-use Linux Nvidia Mining
June 14, 2018, 12:22:27 AM
#7860
Quote from: NikoDE on June 13, 2018, 11:47:00 AM
Quote from: papampi on June 13, 2018, 03:18:19 AM
Quote from: NikoDE on June 12, 2018, 02:13:01 PM
Sorry, updated to latest commit but still: "invalid option -- 'i' "
And still ktccminer?

ETN was in CRYPTONIGHT algos, fixed and moved to CRYPTONIGHTV7
Please update and test again

OK one step further ☺,
Now it starts xmr-stak, unfortunately it doesn't come far... : no config.txt found in home/m1
Also it seems like there is much less content inside the xmr-stak folder of 19.2.1 than it was in xmr of 19.2.0.
Looks like there is a lot work to do- don't stress👍

config.txt should be created in first run by xmr-stak miner, ignore that error on first run.
CryptAtomeTrader44
full member
Activity: 340
Merit: 103
It is easier to break an atom than partialities AE
Re: [OS] nvOC easy-to-use Linux Nvidia Mining
June 13, 2018, 05:55:45 PM
#7859
I have some erros With Bminer:

Code:
INFO] [2018-06-14T00:51:39+02:00] Bminer: When Crypto-mining Made Fast (v8.0.0-32928c5) 
[INFO] [2018-06-14T00:51:39+02:00] Checking updates                             
[INFO] [2018-06-14T00:51:40+02:00] Watchdog has started.                        
[INFO] [2018-06-14T00:51:40+02:00] Starting miner on devices [0 1 2 3 4 5 6 7 8] 
[INFO] [2018-06-14T00:51:40+02:00] Connected to europe.ethash-hub.miningpoolhub.com:20535 
[WARN] [2018-06-14T00:51:40+02:00] Get error: End of file, resetting in 5 seconds 
[INFO] [2018-06-14T00:51:41+02:00] Starting miner on device 0...                
[INFO] [2018-06-14T00:51:41+02:00] Started miner on device 0                    
[INFO] [2018-06-14T00:51:41+02:00] Starting miner on device 1...                
[INFO] [2018-06-14T00:51:42+02:00] Started miner on device 1                    
[INFO] [2018-06-14T00:51:42+02:00] Starting miner on device 2...                
[INFO] [2018-06-14T00:51:42+02:00] Started miner on device 2                    
[INFO] [2018-06-14T00:51:43+02:00] Starting miner on device 3...                
[INFO] [2018-06-14T00:51:43+02:00] Started miner on device 3                    
[INFO] [2018-06-14T00:51:44+02:00] Starting miner on device 4...                
[INFO] [2018-06-14T00:51:44+02:00] Started miner on device 4                    
[INFO] [2018-06-14T00:51:44+02:00] Starting miner on device 5...                
[INFO] [2018-06-14T00:51:45+02:00] Started miner on device 5                    
[INFO] [2018-06-14T00:51:45+02:00] Starting miner on device 6...                
[INFO] [2018-06-14T00:51:45+02:00] Connected to europe.ethash-hub.miningpoolhub.com:20535 
[WARN] [2018-06-14T00:51:45+02:00] Get error: End of file, resetting in 5 seconds 
[INFO] [2018-06-14T00:51:45+02:00] Started miner on device 6                    
[INFO] [2018-06-14T00:51:46+02:00] Starting miner on device 7...                
[INFO] [2018-06-14T00:51:46+02:00] Started miner on device 7                    
[INFO] [2018-06-14T00:51:47+02:00] Starting miner on device 8...                
[INFO] [2018-06-14T00:51:47+02:00] Started miner on device 8                    
[INFO] [2018-06-14T00:51:50+02:00] Connected to europe.ethash-hub.miningpoolhub.com:20535 
[WARN] [2018-06-14T00:51:50+02:00] Get error: End of file, resetting in 5 seconds 
[INFO] [2018-06-14T00:51:55+02:00] Connected to europe.ethash-hub.miningpoolhub.com:20535 
[WARN] [2018-06-14T00:51:55+02:00] Get error: End of file, resetting in 5 seconds 
[INFO] [2018-06-14T00:52:01+02:00] Connected to europe.ethash-hub.miningpoolhub.com:20535 
[WARN] [2018-06-14T00:52:01+02:00] Get error: End of file, resetting in 5 seconds 
[INFO] [2018-06-14T00:52:06+02:00] Connected to europe.ethash-hub.miningpoolhub.com:20535 
[WARN] [2018-06-14T00:52:06+02:00] Get error: End of file, resetting in 5 seconds 
[INFO] [2018-06-14T00:52:11+02:00] Connected to europe.ethash-hub.miningpoolhub.com:20535 
[WARN] [2018-06-14T00:52:11+02:00] Get error: End of file, resetting in 5 seconds 
[INFO] [2018-06-14T00:52:11+02:00] [GPU 0] Speed: 443.81 Sol/s 241.78 Nonce/s Temp: 46C Fan: 55% Power: 110W 4.03 Sol/J 
[INFO] [2018-06-14T00:52:12+02:00] [GPU 1] Speed: 352.93 Sol/s 185.47 Nonce/s Temp: 58C Fan: 55% Power: 109W 3.24 Sol/J 
[INFO] [2018-06-14T00:52:12+02:00] [GPU 2] Speed: 358.73 Sol/s 188.78 Nonce/s Temp: 49C Fan: 55% Power: 110W 3.26 Sol/J 
[INFO] [2018-06-14T00:52:13+02:00] [GPU 3] Speed: 429.11 Sol/s 235.15 Nonce/s Temp: 55C Fan: 55% Power: 103W 4.17 Sol/J 
[INFO] [2018-06-14T00:52:14+02:00] [GPU 4] Speed: 434.70 Sol/s 225.22 Nonce/s Temp: 45C Fan: 55% Power: 101W 4.30 Sol/J 
[INFO] [2018-06-14T00:52:15+02:00] [GPU 5] Speed: 443.81 Sol/s 241.78 Nonce/s Temp: 46C Fan: 55% Power: 110W 4.03 Sol/J 
[INFO] [2018-06-14T00:52:15+02:00] [GPU 6] Speed: 348.59 Sol/s 185.47 Nonce/s Temp: 50C Fan: 55% Power: 42W 8.30 Sol/J 
[INFO] [2018-06-14T00:52:16+02:00] Connected to europe.ethash-hub.miningpoolhub.com:20535 
[WARN] [2018-06-14T00:52:16+02:00] Get error: End of file, resetting in 5 seconds 
[INFO] [2018-06-14T00:52:16+02:00] [GPU 7] Speed: 344.86 Sol/s 188.78 Nonce/s Temp: 57C Fan: 55% Power: 108W 3.19 Sol/J 
[INFO] [2018-06-14T00:52:17+02:00] [GPU 8] Speed: 411.52 Sol/s 221.90 Nonce/s Temp: 46C Fan: 55% Power: 99W 4.16 Sol/J 
[INFO] [2018-06-14T00:52:21+02:00] Connected to europe.ethash-hub.miningpoolhub.com:20535 
[WARN] [2018-06-14T00:52:21+02:00] Get error: End of file, resetting in 5 seconds 
[INFO] [2018-06-14T00:52:26+02:00] Connected to europe.ethash-hub.miningpoolhub.com:20535 
[WARN] [2018-06-14T00:52:26+02:00] Get error: End of file, resetting in 5 seconds 
[INFO] [2018-06-14T00:52:31+02:00] Connected to europe.ethash-hub.miningpoolhub.com:20535 
[WARN] [2018-06-14T00:52:31+02:00] Get error: End of file, resetting in 5 seconds 
[INFO] [2018-06-14T00:52:36+02:00] Connected to europe.ethash-hub.miningpoolhub.com:20535 
[WARN] [2018-06-14T00:52:36+02:00] Get error: End of file, resetting in 5 seconds


I just changed ETHASH_MINER="CLAYMORE"     to ETHASH_MINER="BMINER"

What's the problem ?


It looks OK for Bminer minning EQUIHASH. Even, the first start on ZCL had the same problem than above with ETHASH
CryptAtomeTrader44
full member
Activity: 340
Merit: 103
It is easier to break an atom than partialities AE
Re: [OS] nvOC easy-to-use Linux Nvidia Mining
June 13, 2018, 05:44:37 PM
#7858
Quote from: papampi on June 13, 2018, 03:37:48 AM
Quote from: CryptAtomeTrader44 on June 12, 2018, 06:24:41 PM


1/ Improve your miner's update script, and propose to launch it a the first boot to force reompiling all of them for each RIG.
2/ Add intensity to 17 by default for all miners (leave a comment beside as you did for overclocking settings)
3) How do you put power under 90 W ?
4/ WTM_SWITCHER is a good impovment that necessitate  more gray matter from the miner to set it ! Ouchhhhh !
5/ Bmine ? ZENEMYminer ?
6/ Is X16R is really profitable ? I doubt a lot...
7/ Adding some Cryptonight and cryptonight V7 added in xmr-stak miner


Thanks for the detailed review

Quote from: papampi on June 13, 2018, 03:37:48 AM
1.
Not a good idea to force  re-compile all miners as it take long time, its best to let users decide.
we made some changes though to just stop the running miner if it needed so there is much less time wasted when updating miners
Miners source are already added and they get downloaded from source code if you go for recompile.


- Perhaps not all miners need to be re-compiled, but i can affirm you that when i launch you miner script update thaht i used from your Wiki page, i was having 3 miners of 4 don't started anything.
- I opened your script and i saw thaht you donwload some miners from YOUR github. YOUR repository don't contain all sources files, only 2 files. I manually download miners thaht cause me loops in 3main. I have no reasons to tell you a different reality that i had when i follow your Wiki page on github.

Quote from: papampi on June 13, 2018, 03:37:48 AM
2.
There is already a comment for intensity in 1bash, Will make a change for the error so it uses default values.  
# Test intensity on your rig and edit it or miner will set default values

- Ok, i had'nt saw this comment line. But i can affirm you that TPccminer don't apply default value and it don't start at my first boot. perhaps because it needs to be re-compiled ! All started correctly after re-compliling some miners. It was effectively very long time to re-compile all. I also updated xmr-stak with their last github code.

Quote from: papampi on June 13, 2018, 03:37:48 AM
3.
I already set some cards to 75, no idea why you get into trouble setting that.
Please post the warning messages you get.

Ok, i will post this message when i was having more time.

Quote from: papampi on June 13, 2018, 03:37:48 AM
4.
Dont catch what you asked here

Is it possible to make graphcet diagram to be more understanding for a newbie user ? Your explantation comments helps so much but i think it's not an easy to use profit switcher for a beginner. Perhaps a simple minimalist diagram could helps. That's just i wanted to tell at this point.

Quote from: papampi on June 13, 2018, 03:37:48 AM
5.
Bminer is new miner for ethahs and equihash, z-enemy is best for x16r

Is Bminer better than Claymore and DSTM ? More stable ?  More efficency ? Less fees ?

Quote from: papampi on June 13, 2018, 03:37:48 AM
6.
You know better

I'm not sure what you mean. NO, i don't know anything about this algo. I read a little on discord but it was more than 2 month ...

Quote from: papampi on June 13, 2018, 03:37:48 AM
7.
Fixed ETN and moved to V7

In fact, i was thinking about a profit Switcher on all Cryptonight algo and coins proposed by this miner


I discovered a new bug : In 1bash, at the end of file :

Replace NICE- to NICE_

Code:

## IDENTIFY MINING ALGORITHM START
if [[ $COIN == FTC || $COIN == ORB || $COIN == PXC || $COIN == VIVO || $COIN == TZC || $COIN == NICE-NEOSCRYPT || $COIN == DSR || $COIN == CRC || $COIN == GBX || $COIN == MPH_NEOSCRYPT || $COIN == ZPOOL_NEOSCRYPT ]]
then
  ALGO=NEOSCRYPT
elif [[ $COIN == ETH || $COIN == ETC || $COIN == EXP || $COIN == UBQ || $COIN == CLO || $COIN == MUSIC || $COIN == SOIL || $COIN == MPH_ETHASH || $COIN == PIRL || $COIN == NICE-ETHASH || $COIN == ETP ]]
then
  ALGO=ETHASH
elif [[ $COIN == BTG || $COIN == ZEC || $COIN == ZEN || $COIN == HUSH || $COIN == ZCL || $COIN == BTCP || $COIN == KMD || $COIN == ZPOOL_EQUIHASH || $COIN == MPH_EQUIHASH || $COIN == NICE-EQUIHASH || $COIN == VOTE   || $COIN == BTCP  || $COIN == BCI ]]
then
  ALGO=EQUIHASH
elif [[ $COIN == SIGT || $COIN == ZPOOL_SKUNK || $COIN == ALTCOM || $COIN == NICE-SKUNKHASH ]]
then
  ALGO=SKUNK
elif [[ $COIN == MONA || $COIN == VTC || $COIN == NICE-LYRA2REV2 || $COIN == XVG || $COIN == MPH_LYRA2V2 || $COIN == ZPOOL_LYRA2V2 ]]
then
  ALGO=LYRA2V2
elif [[ $COIN == KRB || $COIN == ETN || $COIN == NICE-CRYPTONIGHT ]]
then
  ALGO=CRYPTONIGHT
elif [[ $COIN == ZCOIN || $COIN == MPH_LYRA2Z ]]
then
  ALGO=LYRA2Z
elif [[ $COIN == BSD ]]
then
  ALGO=XEVAN
elif [[ $COIN == RVN ]]
then
  ALGO=X16R
elif [[ $COIN == BTX ]]
then
  ALGO=BITCORE
elif [[ $COIN == SIB  || $COIN == NICE-X11GHOST ]]
then
  ALGO=SIB
elif [[ $COIN == MONERO || $COIN == MPH_CRYPTONIGHTV7 ]]
then
  ALGO=CRYPTONIGHTV7
elif [[ $COIN == XMR || $COIN == LUX || $COIN == FLM ]]
then
  ALGO=PHI
elif [[ $COIN == PASC || $COIN == PASL ]]
then
  ALGO=PASCAL
elif [[ $COIN == LBC || $COIN == ZPOOL_LBRY ]]
then
  ALGO=LBRY
elif [[ $COIN == DMD ]]
then
  ALGO=DMD-GR
elif [[ $COIN == GRS || $COIN == MPH_GRS ]]
then
  ALGO=GRS
elif [[ $COIN == XMY ]]
then
  ALGO=MYR-GR
elif [[ $COIN == DCR || $COIN == MPH_MYR-GR ]]
then
  ALGO=DECRED
elif [[ $COIN == SIA ]]
then
  ALGO=SIA
elif [[ $COIN == ONION ]]
then
  ALGO=X13
elif [[ $COIN == ZPOOL_SKEIN || $COIN == MPH_SKEIN ]]
then
  ALGO=SKEIN
else
  ALGO=UNDEFINED
fi
export ALGO
## IDENTIFY ALGORITHM END

Today i tried to use NICE_ETHASH, NICE_NEOSCRYPT and NICE_EQUIHASH in WTM_SWITCHER and it seems thaht NICE_ETHASH is not functionnal.
i saw Error blobxxx with claymore. I don't tried Bminer yet for ETHASH ALGO...No PB with 2 others nicehash algo switch

When do you plan to provide a new ISO file ? How much time testing ?

Pages:
Bitcoin Forum>Alternate cryptocurrencies>Mining (Altcoins)
Jump to: