I'm actually using 19.2.1 beta testing version and i give my returns :90
1/ I think first step before launching is to update miners, all miners. But you can specifically update those you prefer/need to use.
Yourt miner's update script is good and easy to use but it has some errors due to incomplete code in papampi's github repository. I opened your script and donwload manually each miners i need to launch and i saw they had only two files (version and ccminer) for some of them in his repository.
@papampi : Why do you not use repositories of each miner's developpers on github ? Is there some problems to dowload them from nvOC ? Why not git command from their repositories directly to NVoc ??
I think you should force recompile all of the miners softwares for the first step. It's the best way to make some adaptated miners for each hardware configuration.
Your miners update script is good and easy to use, but must be improved. it will be decisive for 19.2.1. It was the first problem i had with the testing version.
2/ You should define default intensity to 17, maximal intensity for Neoscrypt in using Klaust ccminer (KTccminer)
I mine MONA and i saw immediatly the -i option empty made an invalid command to launch TPccminer for Lyra2REV2. I changed for NAccminer. But i had same problem. So i had to re-read you 1bash and 3main, and 0miner files to understand your unifications and modifications you made. I had some headacke after two month not reading code. But i succeded to undertsand after several re-readings ah ah
3/ I don't understand how you put power under 90w. Nvidia commands refuses to apply them under 90W for my 1060 and 1070. I think for the first launch, you should enter 90w for all power parameters in 1 bash, even ALGO SPECIFIC. Or, if you use a spécific command to launch theses less power instructions, it must be executed BEFORE, and we should not see theses warnings messages.
4/ Your WTM switcher is more complicated to set. I saw you launch it in a screen command to prevent your minning time errors that was problematic before. Good job ! Too bad that at the moment it is not too useful because of the bear market. I think i had to tame how to use it and set it correctly.
5/ I saw 2 new miners that i don't know if they have some best perrfomances :
a) Bminer ? Which ALGO this miner is better to use ?
b) ZENEMY ? Same Questions ?
I noticed we can now using xmr-stak almost like all others miner's softwares.
6/ I 've not mined X16R ALGO yet, but if i look at WTM website, i'm not sure i will mine it. Furthermore, i'm suspicious about cryptobridge DEX "decentralazed exchange" that look me centralized on their website and servers and with a bitch of shitcoins. I use BarterDEX for now since 3 month, it's Ok, not perfect but i succeded
5 or 6 atomics swaps with HUSH/KMD...So, i think i will not use cryptopia stealers again. Furthermore, they recently published a better interface than barterDEX, called hyperDEX (not tested yet).
7/ I think, we could add all the coins permitted to mine with xmr-stak. I mined 2 XMR with 5x1060 + 5x1070 in less than two month on a small pool with less than 3 MH/s at the beginningg (april 14) and less than 2Mh/s after 15 days. Perhaps i will make some addintions propositions about that in nest weeks.
Resume :
1/ Improve your miner's update script, and propose to launch it a the first boot to force reompiling all of them for each RIG.
2/ Add intensity to 17 by default for all miners (leave a comment beside as you did for overclocking settings)
3) How do you put power under 90 W ?
4/ WTM_SWITCHER is a good impovment that necessitate more gray matter from the miner to set it ! Ouchhhhh !
5/ Bmine ? ZENEMYminer ?
6/ Is X16R is really profitable ? I doubt a lot...
7/ Adding some Cryptonight and cryptonight V7 added in xmr-stak miner
./xmr-stak_miner --help
Usage: xmr-stak_miner [OPTION]...
-h, --help show this help
-v, --version show version number
-V, --version-long show long version number
-c, --config FILE common miner configuration file
-C, --poolconf FILE pool configuration file
--benchmark BLOCKVERSION ONLY do a 60-second benchmark and exit
--noCPU disable the CPU miner backend
--cpu FILE CPU backend miner config file
--noAMD disable the AMD miner backend
--noAMDCache disable the AMD(OpenCL) cache for precompiled binar ies
--openCLVendor VENDOR use OpenCL driver of VENDOR and devices [AMD,NVIDIA ]
default: AMD
--amd FILE AMD backend miner config file
--noNVIDIA disable the NVIDIA miner backend
--nvidia FILE NVIDIA backend miner config file
-i --httpd HTTP_PORT HTTP interface port
The following options can be used for automatic start without a guided config,
If config exists then this pool will be top priority.
-o, --url URL pool url and port, e.g. pool.usxmrpool.com:3333
-O, --tls-url URL TLS pool url and port, e.g. pool.usxmrpool.com:1044 3
-u, --user USERNAME pool user name or wallet address
-r, --rigid RIGID rig identifier for pool-side statistics (needs pool support)
-p, --pass PASSWD pool password, in the most cases x or empty ""
--use-nicehash the pool should run in nicehash mode
--currency NAME currency to mine
Supported coin opitons:
- aeon7
- bbscoin
- croat
- cryptonight
- cryptonight_heavy
- cryptonight_lite
- cryptonight_lite_v7
- cryptonight_v7
- edollar
- electroneum
- graft
- haven
- intense
- karbo
- monero7
- stellite
- sumokoin
Version: xmr-stak 2.4.3 26a5d65f
Brought to by fireice_uk and psychocrypt under GPLv3.
Conclusion, i'm ready to test again when you will have revised theses 2 or three first point i post above. and you will able to make a new image after new testings.
footnote : I don't used google translate, so sorry if my message is not esasy to read. And I do not have time to re-read
Good job papampi. happy minning.
Waiting for the next testing version.
gnome-terminal-server and 3main running.