Topic: Owners of GTX 1070, what is your hashrate? (Read 27710 times)

 Here, you can find Hashrate of GTX 1070 below...


Gigabyte GTX 1070 Provide 32 MHash/s hashrate for Ethereum at Coreclock 9675 while consuming 150 Power(watts).

https://miningchamp.com/gpus/59/Gigabyte-GTX-1070-hashrate


KFA2 GTX 1070 Provide 25 MHash/s for Ethereum.

https://miningchamp.com/gpus/47/KFA2-GTX-1070-hashrate


Gigabyte GTX 1070 Provide 31.2 MHash/s    hashrate for Ethereum at Coreclock 2025 while consuming 185 Power(watts).

https://miningchamp.com/gpus/62/Gigabyte-GTX-1070-hashrate


Gigabyte GTX 1070 Provide 32.500 MHash/s hashrate for Ethereum at Coreclock -200 MHz and Memoryclock 740 MHz while consuming 95 Power(watts).

https://miningchamp.com/gpus/123/Nvidia-GTX-1070-hashrate


MSI GTX 1070 8GB Provide 31.246 MHash/s hashrate for Ethereum at Coreclock 152 MHz and Memoryclock 610 MHz while consuming 91 Power(watts).

https://miningchamp.com/gpus/114/MSI-GTX-1070-8GB-hashrate


EVGA GTX 1070 SC 25.42 MHash/s  hashrate for Ethereum.

https://miningchamp.com/gpus/117/EVGA-Gtx-1070-sc-hashrate


Nvidia GTX 1070 Ti 43.27 MHash/s  hashrate for Lyra2REv2  at Coreclock 1695 MHz and Memoryclock 4303 MHz while consuming 140 Power(watts).

https://miningchamp.com/gpus/125/Nvidia-GTX-1070-Ti-hashrate


Asus GTX 1070 Ti 45 MHash/s  hashrate for Lyra2REv2  at Coreclock 1771 MHz and Memoryclock 3402 MHz.

https://miningchamp.com/gpus/144/Asus-GTX-1070-Ti-hashrate

Zotac 1070 AMP! Extreme
Hashrate: 33.20 Mh/s


Gigabyte 1070 Aorus
Hashrate: 32.30 Mh/s

Both brands running with these Afterburner-Settings:
Power Limit: 50%
Temp: 70°
Core Clock: +100
Memory Clock: +740
OS :  Windows 10
Driver Version:  411.63

Miner: TradeTec Miner
Algorithm: Ethash (Dagger-Hashimoto)

That's about right.  My dual EVGA 1070s are getting about 62-64mh/s.  Problem is that being in CA I also pay .25kwh, so 75% of eth mining goes to SCE.  I had to shut down my two 6x1060 rigs because in April with the halving and insane diff I was actually paying to mine.

I was hoping that maybe ZEC would be a good alt coin to get into, but it appears not.

Gotta mine in TX (.08kwh), or have a killer solar system to make anything these days.

Gigabyte GTX 1070 windforce OC 8GB  X 6

afterburner   : power 79 on 1200 watt psu,  mem clock  +780, core clock -200 , fan 75

ethermine =  current 212
                  reported 197.2

still gona try and clamp power .

Asus GeForce 1070 Hashrate

Hashrate: 31.06 MHash/s

Algorithm: Ethereum

Manufacturer: Asus

Power Consumption: 130

Core Clock:  1784 MHz

Memory clock: 4446 MHz

Nvidia GeForce 1070

OS :  Windows 10

Driver Version:  382.53

Here is the  link that may help.

Feel free to ask more questions!

https://miningchamp.com/gpus/53/Asus-GeForce-1070-hashrate

No problems. use this miner
https://bitcointalksearch.org/topic/ann-dstms-zcash-equihash-nvidia-miner-v062-linux-windows-2021765

Core clock: +100-125
Memory:    +400-500
TDP: 75%

480-490 sol/s
If you add TDP, you will receive a larger hashrate. But look at energy consumption.  As a rule, an increase of 10-20 sol/s greatly increases energy consumption

Temps  60-63 c

sgminer 5.1.0, MPH-Globalboosty - 1.48 KH/s. But the desktop is lagging...

Sorry to break it to you but your buddy is doing it wrong. For the following reasons:

1. 500 sol/s means he is over-volting / increasing power consumption. That is LESS profitable than undervolting because you spend so much energy for minuscule gains.
2. Temps do not need to be "around 70c" to get good profits. He/she is simply reducing the life span of his/her GPU.

These are "basic" knowledge when it comes to GPU mining and if you haven't done enough research to know this then "wtf are u doing."

Hi fellow miners,
This is my first post ... and sorry for my bad English.
I know that ETH it's not the best coin to mine with Nvidia but I will give a try, maybe the price will rise up.

MB: Asus Prime Z270-A
GPU: Gigabyte 1070 G1 Gaming 8GB
GPU Memory: Micron (it's not so worse as people said, anyway it's not my choice to choose the memory).
Soft: MSI Afterburner and Nvidia Inspector.

ETH - Ethermine pool (Claymore 11.6 / Phoenix Miner 2.9e)

TDP: 60%
Core clock: -100 (changed to -150 no impact on hashrate)
Memory clock: +800 but it's not so stable, was ok with claymore 11.6 but i've changed the miner and the computer restarts after 6-8 hours with Phoenix Miner 2.9e
+780 - stable at this value
Fan Speed: 60% (GPU around 48-60 degree C - depends by weather condition).

Phoenix Miner 2.9e (7x1070) - 231 Mh/s (33 - 33.5 Mh/s / 1070).
Claymore 11.6 (7x1070) - 226 Mh/s (32 - 32.7 Mh/s / 1070).

**********************************************************************
I've also mined LUX and it's around 19.8 - 20.2 Mh/s / 1070.
Maybe it's space for improvement but I'm sure I need more power.

TPD: 75%
Core Clock: +130
Memory: -460
Fan: 60%

**********************************************************************
I'm trying to mine XVG (X17 algo), to see how much I can earn.
I'm on xvg-x17.suprnova.cc. I don't know if this is the best pool or not :/

TDP: 75%
Core clock: +125 (changed to +120 - no impact on hashrate)
Memory: -500
Fan: 60%

7 x 1070G1 Gaming: 75 - 76 MH/s. (75% TDP ~ 100W/GPU according NVI)
7 x 1070G1 Gaming: ~79 Mh/s (85% TDP but I don't think it's worth it ~130-140W/GPU)

Regards,
Radu

Hi everyone,

I just started dual mining Eth and XVG blake2s with claymore 11.5 and i have the following hashrate

eth 32.090 mhs
b2s 480.393 mhs

My settings are +750 memory, 0 core clock, power limit to 70 (dcri 45)

i've some doubts on the b2s hashrate as i read that usually is something like 3000 mhs, am i  missing something?

Oh really? Also with 65% TDP?

Those zotac mini cores can all hit +200-225, you should be around 2800-2900 hashrate. Zcash is core hungry.

EVGA SC Black GTX 1070;

Dagger/Sia: 30.6mh/s eth - 307mh/s sia | Power draw: 150W/h (1GPU + Mobo + CPU + 1USB Wireless + 1 Case Fan)

70% tdp, +600 memory (micron), +0 Core | 50 celsius @ %50 Fan Speed

Dudes at reddit said I do no good by running a dual miner so i tried to run solo daggerhashimoto but while i lost hashrate/income (29.5 mh/s) by doing so, my power draw didn't change neither.

So went back to dagger/sia.

What CCminer fork do you are running?

6x Gigabyte 1070 WF3 8Gb - about 2950 H/s Equihash with dstm miner

Hey, my rig consists of: 4 x Asus Nvidia GTX 1070 OC 8GB.
Past few hours its being mining the following:


Equihash @ 1.747kSols/s @ 0.63107 @ £3 average (For almost 3-5 hours it has been changing from £3 to £3.30, £3.50, £3.84)

Those are my actual (average)hashrates. Whattomine is not complete. You can try benchmarking using nemosminer on zergpool you'll know your hashrates on those algos.

I also tried mining equihash on nicehash, got around 470 sol/s  90-powerlimit +30 core +50 mem around 55c temp. I tried increasing the core to +100 and +500 mem but i only got around 490 sol/s, i don't think it's worth it so i returned it to +30 core and +50 mem.

I have 6 Zotac Mini GTX 1070 (Asrock h81 BTC r2.0 / Thermaltake RBG 850W Gold / 8GB) .

My best efficiency for ETH is:

• TDP: 63%
• Core: +0 (1300-1500)
• Mem: +400 (4200MHz)
• Fan: 80%
• Miner: Claymore v11.5
• Driver: 391.01
• ambient temperature: 17°C (62,6°F)
• card temperature: 43°C-53°C (109,4°F-127,4°F)
  
• Pool: ethermine
• MH/s: avg. 175
• Wall: 650W

Thaks for sharing. Where do you see the profitability of these algos? I'm checking whattomine that says that Equihash is most profitable so I am doing MiningPoolHub.com Equihash Algo switch mining (Port 17XXX) with MultiPoolMiner and DSTM miner and it seems doing about the same amount that whattomine says. I have ASUS 3-fan 1070 cards 90% power, clock +100 and mem +500.

I have 2 Zotac amp extreme 1070.
my most profitable algos are the following with average hashrate:
xevan:3800 kh/s
c11: 19 mh/s
phi: 20 mh/s

just had the gpu's for almost a week,still figuring out the sweet spot for oc.
current settings: (Im using ASUS GPU tweak not MSI Afterburner)
+60 boost clock (1895Mhz)
+20 Mem Clock (8028 Mhz)
80 % power target
gpu temp 52c

including 1 1080ti, i get around 0.0006 btc per day.
got any advice?
Anyone got the same gpu's on same algo?
I'm mining on zergpool using nemosminer.