I'm getting me a 2nd rig wanna get nvidia cards out of the three brands i've read here EVGA, ASUS Duals and the Zotac mini which one would you recommend?
Thank you
Topic: Owners of GTX 1070, what is your hashrate? - page 5. (Read 27772 times)
Hello there
I'm getting me a 2nd rig wanna get nvidia cards out of the three brands i've read here EVGA, ASUS Duals and the Zotac mini which one would you recommend?
Thank you
I'm getting me a 2nd rig wanna get nvidia cards out of the three brands i've read here EVGA, ASUS Duals and the Zotac mini which one would you recommend?
Thank you
Got my card in, up and running.
Power 80%
Core +100
Memory +400
Fan Spd 75%
Steady at 58 degrees C
daggerhash 26.5 MH/s
decred 847 MH/s
First clock changes, will see how it runs overnight and add more.
Looks ok so far guys? (Mining on NiceHash)
Power 80%
Core +100
Memory +400
Fan Spd 75%
Steady at 58 degrees C
daggerhash 26.5 MH/s
decred 847 MH/s
First clock changes, will see how it runs overnight and add more.
Looks ok so far guys? (Mining on NiceHash)
Worth playing with the -dcri setting with -dcri 120 I get about 30.5mhs eth and 1ghs decred
Is that in the nvidia driver control panel or Afterburner?
Your using the nicehash gui miner right?
I am - I think i know what your going to say. The performance enhancement option for nVidia cards? I dont have it enabled at the moment cos im still in my first 24hrs on mining and I am tweaking Afterburner while i mine. Am I right?
Got my card in, up and running.
Power 80%
Core +100
Memory +400
Fan Spd 75%
Steady at 58 degrees C
daggerhash 26.5 MH/s
decred 847 MH/s
First clock changes, will see how it runs overnight and add more.
Looks ok so far guys? (Mining on NiceHash)
Power 80%
Core +100
Memory +400
Fan Spd 75%
Steady at 58 degrees C
daggerhash 26.5 MH/s
decred 847 MH/s
First clock changes, will see how it runs overnight and add more.
Looks ok so far guys? (Mining on NiceHash)
Worth playing with the -dcri setting with -dcri 120 I get about 30.5mhs eth and 1ghs decred
Is that in the nvidia driver control panel or Afterburner?
Your using the nicehash gui miner right?
Got my card in, up and running.
Power 80%
Core +100
Memory +400
Fan Spd 75%
Steady at 58 degrees C
daggerhash 26.5 MH/s
decred 847 MH/s
First clock changes, will see how it runs overnight and add more.
Looks ok so far guys? (Mining on NiceHash)
Power 80%
Core +100
Memory +400
Fan Spd 75%
Steady at 58 degrees C
daggerhash 26.5 MH/s
decred 847 MH/s
First clock changes, will see how it runs overnight and add more.
Looks ok so far guys? (Mining on NiceHash)
Worth playing with the -dcri setting with -dcri 120 I get about 30.5mhs eth and 1ghs decred
Is that in the nvidia driver control panel or Afterburner?
Got my card in, up and running.
Power 80%
Core +100
Memory +400
Fan Spd 75%
Steady at 58 degrees C
daggerhash 26.5 MH/s
decred 847 MH/s
First clock changes, will see how it runs overnight and add more.
Looks ok so far guys? (Mining on NiceHash)
Power 80%
Core +100
Memory +400
Fan Spd 75%
Steady at 58 degrees C
daggerhash 26.5 MH/s
decred 847 MH/s
First clock changes, will see how it runs overnight and add more.
Looks ok so far guys? (Mining on NiceHash)
Worth playing with the -dcri setting with -dcri 120 I get about 30.5mhs eth and 1ghs decred
Got my card in, up and running.
Power 80%
Core +100
Memory +400
Fan Spd 75%
Steady at 58 degrees C
daggerhash 26.5 MH/s
decred 847 MH/s
First clock changes, will see how it runs overnight and add more.
Looks ok so far guys? (Mining on NiceHash)
Power 80%
Core +100
Memory +400
Fan Spd 75%
Steady at 58 degrees C
daggerhash 26.5 MH/s
decred 847 MH/s
First clock changes, will see how it runs overnight and add more.
Looks ok so far guys? (Mining on NiceHash)
2-EVGA 1070 Hybrids, PL 65%, +75 CC, +740 MC, 0.00v boost
4-EVGA 1070 Gaming Black, PL 76%, +75 CC, +740 MC, 0.00v boost
Dual Mining ETH/DCR to get a total of 186MH/s ETH, 2.3GH/s DCR, 900W for my rig.
Been running a few months and only restarts every few days.
4-EVGA 1070 Gaming Black, PL 76%, +75 CC, +740 MC, 0.00v boost
Dual Mining ETH/DCR to get a total of 186MH/s ETH, 2.3GH/s DCR, 900W for my rig.
Been running a few months and only restarts every few days.
I have two rigs... one is 7x ASUS DUAL OC GTX 1070s.
I get about 460 sol/sec on EWBF 0.34 on Equihash, and 30.5MH/sec on Claymore dualmining Equihash and Sia (total of 214MH/sec for the rig), at around 145W per card.
The other rig is 5x Gigabyte Windforce GTX 1070 and 1x MSI Duke GTX 1070.
For Equihash, the Gigabytes get around 470-480, and the MSI can reach 500 - but these cards are much heavier on the power draw, even with power turned down.
On Claymore dual-mining ETH and Sia I get around 31.5MH/sec (total of around 188MH/sec for the rig).
Great performance but I would suggest the DUALs if electricity cost is a big factor for you.
What I am curious about is Lyra2z settings. My Gigabyte and MSI rig together gets about 9000kH/sec (averageing 1500kH/s per card) when mining ZCoin.
I'm not at all sure what the best overclock settings for this algo are, so any input would be appreciated.
I get about 460 sol/sec on EWBF 0.34 on Equihash, and 30.5MH/sec on Claymore dualmining Equihash and Sia (total of 214MH/sec for the rig), at around 145W per card.
The other rig is 5x Gigabyte Windforce GTX 1070 and 1x MSI Duke GTX 1070.
For Equihash, the Gigabytes get around 470-480, and the MSI can reach 500 - but these cards are much heavier on the power draw, even with power turned down.
On Claymore dual-mining ETH and Sia I get around 31.5MH/sec (total of around 188MH/sec for the rig).
Great performance but I would suggest the DUALs if electricity cost is a big factor for you.
What I am curious about is Lyra2z settings. My Gigabyte and MSI rig together gets about 9000kH/sec (averageing 1500kH/s per card) when mining ZCoin.
I'm not at all sure what the best overclock settings for this algo are, so any input would be appreciated.
Try this build of ccminer for lyra2z
https://github.com/Nanashi-Meiyo-Meijin/ccminer/releases/
I have two rigs... one is 7x ASUS DUAL OC GTX 1070s.
I get about 460 sol/sec on EWBF 0.34 on Equihash, and 30.5MH/sec on Claymore dualmining Equihash and Sia (total of 214MH/sec for the rig), at around 145W per card.
The other rig is 5x Gigabyte Windforce GTX 1070 and 1x MSI Duke GTX 1070.
For Equihash, the Gigabytes get around 470-480, and the MSI can reach 500 - but these cards are much heavier on the power draw, even with power turned down.
On Claymore dual-mining ETH and Sia I get around 31.5MH/sec (total of around 188MH/sec for the rig).
Great performance but I would suggest the DUALs if electricity cost is a big factor for you.
What I am curious about is Lyra2z settings. My Gigabyte and MSI rig together gets about 9000kH/sec (averageing 1500kH/s per card) when mining ZCoin.
I'm not at all sure what the best overclock settings for this algo are, so any input would be appreciated.
I get about 460 sol/sec on EWBF 0.34 on Equihash, and 30.5MH/sec on Claymore dualmining Equihash and Sia (total of 214MH/sec for the rig), at around 145W per card.
The other rig is 5x Gigabyte Windforce GTX 1070 and 1x MSI Duke GTX 1070.
For Equihash, the Gigabytes get around 470-480, and the MSI can reach 500 - but these cards are much heavier on the power draw, even with power turned down.
On Claymore dual-mining ETH and Sia I get around 31.5MH/sec (total of around 188MH/sec for the rig).
Great performance but I would suggest the DUALs if electricity cost is a big factor for you.
What I am curious about is Lyra2z settings. My Gigabyte and MSI rig together gets about 9000kH/sec (averageing 1500kH/s per card) when mining ZCoin.
I'm not at all sure what the best overclock settings for this algo are, so any input would be appreciated.
Highly dependent on each card, i have 8x 1070 Asus Dual OC(+ Some AMD`s), ordered at the same time from the same batch with Micron memory, also environment temperature makes some differences.
At the current time in a large room with +30C environmental temp the cards preforms from 440 to 470 Sol/s for Zcash(When room is at +20C, the same cards preform around 445-480 Sol/s), GPU temperatures varies from 51C upto 68C, those that perform around 440 Sol/s are also the same ones that have a higher temperature. Dual Eth+Sia results in around 30.5-32Mh/s and around 350 for Sia.
Seperate optimization for each card, but lets say around 95% Power, +150 Core and +650 Mem on Zcash, and Around 82% Power, +0 Core and +650 Mem on Eth+Sia.
At the current time in a large room with +30C environmental temp the cards preforms from 440 to 470 Sol/s for Zcash(When room is at +20C, the same cards preform around 445-480 Sol/s), GPU temperatures varies from 51C upto 68C, those that perform around 440 Sol/s are also the same ones that have a higher temperature. Dual Eth+Sia results in around 30.5-32Mh/s and around 350 for Sia.
Seperate optimization for each card, but lets say around 95% Power, +150 Core and +650 Mem on Zcash, and Around 82% Power, +0 Core and +650 Mem on Eth+Sia.
Im about to take the plunge and buy a 1070... can anyone recommend a brand/model please?
Try to get one with Samsung memory. That being said I don't know any producer that uses just Samsung memory so good luck.
Just ordered this.
Next day delivery.
https://www.overclockers.co.uk/zotac-geforce-gtx-1070-mini-8192mb-gddr5-pci-express-graphics-card-zt-p10700g-10m-gx-10r-zt.html
I have that card, mine has Micron memory
Not fussed on my memory at this stage, Im in the very early stages of my mining career. This card will go into my gaming system, will be left on overnight to mine. In time, i plan on making a dedicated mining rig.
I have tweaked a version of MegaMiner, at the moment each algo is using the fastest miner i can find
https://github.com/MikeBuzz/Megaminer
Im about to take the plunge and buy a 1070... can anyone recommend a brand/model please?
Try to get one with Samsung memory. That being said I don't know any producer that uses just Samsung memory so good luck.
Just ordered this.
Next day delivery.
https://www.overclockers.co.uk/zotac-geforce-gtx-1070-mini-8192mb-gddr5-pci-express-graphics-card-zt-p10700g-10m-gx-10r-zt.html
I have that card, mine has Micron memory
Not fussed on my memory at this stage, Im in the very early stages of my mining career. This card will go into my gaming system, will be left on overnight to mine. In time, i plan on making a dedicated mining rig.
Im about to take the plunge and buy a 1070... can anyone recommend a brand/model please?
Try to get one with Samsung memory. That being said I don't know any producer that uses just Samsung memory so good luck.
Just ordered this.
Next day delivery.
https://www.overclockers.co.uk/zotac-geforce-gtx-1070-mini-8192mb-gddr5-pci-express-graphics-card-zt-p10700g-10m-gx-10r-zt.html
I have that card, mine has Micron memory
Im about to take the plunge and buy a 1070... can anyone recommend a brand/model please?
Try to get one with Samsung memory. That being said I don't know any producer that uses just Samsung memory so good luck.
Just ordered this.
Next day delivery.
https://www.overclockers.co.uk/zotac-geforce-gtx-1070-mini-8192mb-gddr5-pci-express-graphics-card-zt-p10700g-10m-gx-10r-zt.html
NomNom MusicCoin
6x 1070 undervoltage - 176.67 MH
thakns Tux
6x 1070 undervoltage - 176.67 MH
thakns Tux
My Palit Superjetstream gets 475-495 sol/s with EWBF 0.3.4 miner. My overclock is core+114 and memory+480. After installing the new drivers my hashrates dropped and the card was less stable - I used to be getting consistent 495-505 sol/s and can overclock to core+144 and memory+536. My power consumption now is around 180w.
My zotac minis are at 470-475 sol/s with memory +675, core +100, PL 80, EWBF 0.3.4, drivers 375.XX, Win 7 64 bit.
Each card consumes 150w max.
Rig is 1 week stable and has a code to restart EWBF every 2 hours.
Currently power:75% gpu:+110 mem:+350 Only getting 420 sols
maybe it's the drivers?? I've cranked mem up to 600 and gpu +140 and notice no increase in sols and crash after a few hours...When you push a card beyond its overclocking limits its starts reducing its speed.
Try something in between and do only one parameter at a time (so move core clock to 0 and adjust memory till you dont get any increase and back it off by 25. Next try tweaking the core clock then once you have that dialed in play with the PL).
Cooler ambient temps help cards gain some performance too (atleast in my setup).
My Palit Superjetstream gets 475-495 sol/s with EWBF 0.3.4 miner. My overclock is core+114 and memory+480. After installing the new drivers my hashrates dropped and the card was less stable - I used to be getting consistent 495-505 sol/s and can overclock to core+144 and memory+536. My power consumption now is around 180w.
My zotac minis are at 470-475 sol/s with memory +675, core +100, PL 80, EWBF 0.3.4, drivers 375.XX, Win 7 64 bit.
Each card consumes 150w max.
Rig is 1 week stable and has a code to restart EWBF every 2 hours.
Currently power:75% gpu:+110 mem:+350 Only getting 420 sols
maybe it's the drivers?? I've cranked mem up to 600 and gpu +140 and notice no increase in sols and crash after a few hours...It's your power and core.
EVGA 1070 8gb
Micron Mem
AB:
Power 75
Temp 80
Core +100
Mem +700
Dual Mine ETH + SIA
ETH - Total Speed: 31.452 Mh/s
SC - Total Speed: 314.522 Mh/s
https://imgur.com/46Im1Do
Micron Mem
AB:
Power 75
Temp 80
Core +100
Mem +700
Dual Mine ETH + SIA
ETH - Total Speed: 31.452 Mh/s
SC - Total Speed: 314.522 Mh/s
https://imgur.com/46Im1Do
Im about to take the plunge and buy a 1070... can anyone recommend a brand/model please?
Try to get one with Samsung memory. That being said I don't know any producer that uses just Samsung memory so good luck.
Im about to take the plunge and buy a 1070... can anyone recommend a brand/model please?
Jump to: