Topic: [pandacoin] The Panda Coin ♥ Scrypt Adaptive-N w/Kimotos Gravity Well ★ - page 151. (Read 398951 times)
February 17, 2014, 10:32:46 AM
for maintenance
February 17, 2014, 10:32:23 AM
Lol just had some leet panda spam to my wallet
Thanks whoeva that was
Thanks whoeva that was
February 17, 2014, 10:31:53 AM
February 17, 2014, 10:26:25 AM
Panda coin wallet for MAC...
downloaded from pandacoin website on OP post...
it says "no block source available" REALLY?
Anyone got a working mac wallet - i like to keep everything separate from the miners
downloaded from pandacoin website on OP post...
it says "no block source available" REALLY?
Anyone got a working mac wallet - i like to keep everything separate from the miners
Just leave it be for about 45 minutes and then it starts syncing. At least that's what happened when I installed yesterday. Good luck.
February 17, 2014, 10:23:01 AM
Hello everyone. I know this don't belongs here, however I believe this should be shared here, since pandacoin is a cloned vertcoin
https://bitcointalksearch.org/topic/m.5198086
Quote
"You guys are amazing. those new features are 
Trading VTC for USD
p2p exchange,
Payment plugins
Talks with Mastercard
This is what I applaud to, this is how a virtual currency should be properly developed.
Buying another 50. Thanks!"
Trading VTC for USD
p2p exchange,
Payment plugins
Talks with Mastercard
This is what I applaud to, this is how a virtual currency should be properly developed.
Buying another 50. Thanks!"
https://bitcointalksearch.org/topic/m.5198086
February 17, 2014, 10:22:48 AM
cryptorush BTC platform down again...
yep, dun know why! February 17, 2014, 10:20:47 AM
doing periodic giveaways in channel on freenode
pandacoin
shame we cant do them here but oh well =)
pandacoin
shame we cant do them here but oh well =)
Thanks mate that 10k will help me out loads
February 17, 2014, 10:14:58 AM
cryptorush BTC platform down again...
February 17, 2014, 10:14:30 AM
Panda coin wallet for MAC...
downloaded from pandacoin website on OP post...
it says "no block source available" REALLY?
Anyone got a working mac wallet - i like to keep everything separate from the miners
downloaded from pandacoin website on OP post...
it says "no block source available" REALLY?
Anyone got a working mac wallet - i like to keep everything separate from the miners
February 17, 2014, 10:14:17 AM
http://panda.ocukminingpool.com/
uk based with only a 0.5% fee, low amount of miners but huge payouts.
uk based with only a 0.5% fee, low amount of miners but huge payouts.
February 17, 2014, 10:11:01 AM
doing periodic giveaways in channel on freenode
pandacoin
shame we cant do them here but oh well =)
pandacoin
shame we cant do them here but oh well =)
Im wanting some free Panda,cause i somehow managed to sell @ 11 satoshi all my Panda's
February 17, 2014, 10:07:42 AM
guys i need HELP...
trying to set up one of my miners to get a piece of the Panda action...
getting HW errors like craaaaazy. In 20 minutes of mining im getting between 75 and 100 HW errors on each of 4 280x. (2xAsus and 2x Sapphire)
Have played around with my TC levels but no joy.
current settings.... abbreviated as this is a different PC
I- 13 TC - 8192 --GPU PT -20 temp levels etc engine detail i left off of the scrypt to see if it was causing the errors....
i have tried 8193, and all the way up to 18000... but still getting the errors.
any ideas or advice?
thanks
Paul
trying to set up one of my miners to get a piece of the Panda action...
getting HW errors like craaaaazy. In 20 minutes of mining im getting between 75 and 100 HW errors on each of 4 280x. (2xAsus and 2x Sapphire)
Have played around with my TC levels but no joy.
current settings.... abbreviated as this is a different PC
I- 13 TC - 8192 --GPU PT -20 temp levels etc engine detail i left off of the scrypt to see if it was causing the errors....
i have tried 8193, and all the way up to 18000... but still getting the errors.
any ideas or advice?
thanks
Paul
so i found that if i lower the intensity to 12 i get hardly any errors, but my hashrate is @270 percard - im thinking this should be around 100 more for each card - how would you do this?
Anybody im struggling here....
vertminer.exe --scrypt-vert -o servername:port -u XX -p XX --lookup-gap2 --threat-concurrency 8193 -v 1 -g 2 -i 13 -w 256 --shaders 2048 --gpu-engine 1000 -gpu-memclock 1500
this should give you a constant 340 KHz per card. Hope this helps. Post your results.
thanks for the help - problem is as soon as i change my intensity back to 13 i get HW errors galore - have managed to tweak it upto 300kh per card using engine and clock commands but again this is using intensity 12...
no idea what the problem is, cards work fine on 13 for every other coin i have mined.
Could it possibly be ram related, im using 4gb -with 4 280x. I had read that you need more ram for VERT, so guessing it could be the same for Panda???
February 17, 2014, 10:02:30 AM
doing periodic giveaways in channel on freenode
pandacoin
shame we cant do them here but oh well =)
pandacoin
shame we cant do them here but oh well =)
February 17, 2014, 09:54:52 AM
guys i need HELP...
trying to set up one of my miners to get a piece of the Panda action...
getting HW errors like craaaaazy. In 20 minutes of mining im getting between 75 and 100 HW errors on each of 4 280x. (2xAsus and 2x Sapphire)
Have played around with my TC levels but no joy.
current settings.... abbreviated as this is a different PC
I- 13 TC - 8192 --GPU PT -20 temp levels etc engine detail i left off of the scrypt to see if it was causing the errors....
i have tried 8193, and all the way up to 18000... but still getting the errors.
any ideas or advice?
thanks
Paul
trying to set up one of my miners to get a piece of the Panda action...
getting HW errors like craaaaazy. In 20 minutes of mining im getting between 75 and 100 HW errors on each of 4 280x. (2xAsus and 2x Sapphire)
Have played around with my TC levels but no joy.
current settings.... abbreviated as this is a different PC
I- 13 TC - 8192 --GPU PT -20 temp levels etc engine detail i left off of the scrypt to see if it was causing the errors....
i have tried 8193, and all the way up to 18000... but still getting the errors.
any ideas or advice?
thanks
Paul
so i found that if i lower the intensity to 12 i get hardly any errors, but my hashrate is @270 percard - im thinking this should be around 100 more for each card - how would you do this?
Anybody im struggling here....
Try a tc of 8191, also I would put the core and memclock setting back in. Start at like 1034/1500
February 17, 2014, 09:48:48 AM
Quote
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
vertminer -o poolurl -u username -p password --lookup-gap 2 --shaders 2048,2048 --thread-concurrency 6144,6144 -g 2 -I 13 -w 256 --auto-gpu --gpu-fan 100,100 --temp-cutoff 90,90 --gpu-memclock 1500,1500 --gpu-engine 1090,1085 --gpu-powertune -20,20
setx GPU_USE_SYNC_OBJECTS 1
vertminer -o poolurl -u username -p password --lookup-gap 2 --shaders 2048,2048 --thread-concurrency 6144,6144 -g 2 -I 13 -w 256 --auto-gpu --gpu-fan 100,100 --temp-cutoff 90,90 --gpu-memclock 1500,1500 --gpu-engine 1090,1085 --gpu-powertune -20,20
This .bat file will at least get someone with a 7970 or 280x mining
Find highest thread concurrency you can run. Should be a multiple of 2048 so 2048 x 2 x 3 etc
Gpu engine clock, no 2 cards are the same adjust in increments of 5-10 mhz from 980 - 1200 to find the max hashrate. (GPU engine clock is like this because of badly calibrated bios from manufacturers)
increasing memclock on 7970 cards to 1500 can increase hashrate. Most cards can handle the small OC.
Be aware adjusting memclock moves the engine sweetspot.
This is using vertminer 0.5.3 from https://bitcointalksearch.org/topic/ann-new-thekev-vertminer-ultimate-vertminer-guide-for-windows-466867
Thanks for heads-up Prolifik, what hash rates were you getting with these settings?
February 17, 2014, 09:42:27 AM
Probably just a few more days of these PND guys trying to mislead people. -25% hash since their launch. You know, I get that you support DOGE and have somehow taken issue with the coin, but to willingly mislead new miners is pretty sad. A "fair" war would have been fun at least not trying to scam them into your coin. Let the market decide.
A note to new miners, rely on the OP to get pools and exchanges, otherwise you might be wasting your hash on these spinoff coins.
A note to new miners, rely on the OP to get pools and exchanges, otherwise you might be wasting your hash on these spinoff coins.
+1
February 17, 2014, 09:41:53 AM
Probably just a few more days of these PND guys trying to mislead people. -25% hash since their launch. You know, I get that you support DOGE and have somehow taken issue with the coin, but to willingly mislead new miners is pretty sad. A "fair" war would have been fun at least not trying to scam them into your coin. Let the market decide.
A note to new miners, rely on the OP to get pools and exchanges, otherwise you might be wasting your hash on these spinoff coins.
A note to new miners, rely on the OP to get pools and exchanges, otherwise you might be wasting your hash on these spinoff coins.
+1
coinedup will be adding us later
Regards
sev
February 17, 2014, 09:41:05 AM
Probably just a few more days of these PND guys trying to mislead people. -25% hash since their launch. You know, I get that you support DOGE and have somehow taken issue with the coin, but to willingly mislead new miners is pretty sad. A "fair" war would have been fun at least not trying to scam them into your coin. Let the market decide.
A note to new miners, rely on the OP to get pools and exchanges, otherwise you might be wasting your hash on these spinoff coins.
A note to new miners, rely on the OP to get pools and exchanges, otherwise you might be wasting your hash on these spinoff coins.
February 17, 2014, 09:39:21 AM
guys i need HELP...
trying to set up one of my miners to get a piece of the Panda action...
getting HW errors like craaaaazy. In 20 minutes of mining im getting between 75 and 100 HW errors on each of 4 280x. (2xAsus and 2x Sapphire)
Have played around with my TC levels but no joy.
current settings.... abbreviated as this is a different PC
I- 13 TC - 8192 --GPU PT -20 temp levels etc engine detail i left off of the scrypt to see if it was causing the errors....
i have tried 8193, and all the way up to 18000... but still getting the errors.
any ideas or advice?
thanks
Paul
trying to set up one of my miners to get a piece of the Panda action...
getting HW errors like craaaaazy. In 20 minutes of mining im getting between 75 and 100 HW errors on each of 4 280x. (2xAsus and 2x Sapphire)
Have played around with my TC levels but no joy.
current settings.... abbreviated as this is a different PC
I- 13 TC - 8192 --GPU PT -20 temp levels etc engine detail i left off of the scrypt to see if it was causing the errors....
i have tried 8193, and all the way up to 18000... but still getting the errors.
any ideas or advice?
thanks
Paul
so i found that if i lower the intensity to 12 i get hardly any errors, but my hashrate is @270 percard - im thinking this should be around 100 more for each card - how would you do this?
Anybody im struggling here....
vertminer.exe --scrypt-vert -o servername:port -u XX -p XX --lookup-gap2 --threat-concurrency 8193 -v 1 -g 2 -i 13 -w 256 --shaders 2048 --gpu-engine 1000 -gpu-memclock 1500
this should give you a constant 340 KHz per card. Hope this helps. Post your results.
February 17, 2014, 09:38:00 AM
updated swisscex link on OP to PANDA
Jump to: