Explored the Panda BIOS last night.... and now it boots up to black/blank screen!!!
Must have been too sleepy to know fully what I am doing....
Anybody knows .... what my next course of action to revive it?
Is there a jumper of sorts to reset BIOS?
Topic: PandaMiner B3 Pro New Batch Releases with Only $800-$1750!!!! - page 27. (Read 87292 times)
February 09, 2017, 08:49:00 PM
I think I made a major screwup .....
Explored the Panda BIOS last night.... and now it boots up to black/blank screen!!!
Must have been too sleepy to know fully what I am doing....
Anybody knows .... what my next course of action to revive it?
Is there a jumper of sorts to reset BIOS?
Explored the Panda BIOS last night.... and now it boots up to black/blank screen!!!
Must have been too sleepy to know fully what I am doing....
Anybody knows .... what my next course of action to revive it?
Is there a jumper of sorts to reset BIOS?
February 09, 2017, 07:58:48 PM
February 09, 2017, 05:00:38 PM
Whats ROI up to now?
February 09, 2017, 12:55:18 AM
Just contact the official, it say the second batch will be in 2 month, arghh..any alternative? because I just want to start buy in bulk suddenly out of stock 
February 07, 2017, 11:46:06 AM
I just can confirm that they are out of stock now! We have to wait for the next 2-3 weeks until the next waves is ready for delivery (hopefully).
February 07, 2017, 12:21:39 AM
Want to buy another unit suddenly they say out of stock.
February 01, 2017, 10:07:24 PM
Phil, Does the Pandaminer run smoothly on XMR/ZEC/ETH/ETC? I know earlier it was reported some things didn't work. Is everything working now?
I am trying to figure out if these things out of the box are ready for deployment in a hosting situation or if they need reworked to be useful in that kind of environment. At the moment I am busy buying other things, but I would like to loop back some time this summer and start adding the PM's if they are ready for prime time.
I am trying to figure out if these things out of the box are ready for deployment in a hosting situation or if they need reworked to be useful in that kind of environment. At the moment I am busy buying other things, but I would like to loop back some time this summer and start adding the PM's if they are ready for prime time.
Xmr and zec are solid.
Eth is good at full speed fans.
Right now the hardest thing to do is switch Chinese to English.
I never tested etc do not know.
I like mining xmr pretty good for mining it. 5950 h at 990 watts.
Eliovp mod Linux rom is 6500 h at 830 watts. Big improvement.
I agree the hardest thing is to switch to English. That took a while. I made a USB with Smartminer, changed the bios setup to it will boot on that, and it worked out of the box. No more Windows.
Dont think Smartminer has XMR support though yet.My new fan control mod is simple and easy.
Fans can run at 9 volts vs 12.
I use simplemining Linux now. It is free. It is an easy install it is really stable . My temps are under 60c for the gpus. The fan control works great.
Go to my profile and look at my posts you can see photos of my older mod and my newer mod for the fans .
Also I like simplemining a lot at the moment they are new and seem to be good mining os option.
February 01, 2017, 05:08:30 PM
Phil, Does the Pandaminer run smoothly on XMR/ZEC/ETH/ETC? I know earlier it was reported some things didn't work. Is everything working now?
I am trying to figure out if these things out of the box are ready for deployment in a hosting situation or if they need reworked to be useful in that kind of environment. At the moment I am busy buying other things, but I would like to loop back some time this summer and start adding the PM's if they are ready for prime time.
I am trying to figure out if these things out of the box are ready for deployment in a hosting situation or if they need reworked to be useful in that kind of environment. At the moment I am busy buying other things, but I would like to loop back some time this summer and start adding the PM's if they are ready for prime time.
Xmr and zec are solid.
Eth is good at full speed fans.
Right now the hardest thing to do is switch Chinese to English.
I never tested etc do not know.
I like mining xmr pretty good for mining it. 5950 h at 990 watts.
Eliovp mod Linux rom is 6500 h at 830 watts. Big improvement.
I agree the hardest thing is to switch to English. That took a while. I made a USB with Smartminer, changed the bios setup to it will boot on that, and it worked out of the box. No more Windows.
Dont think Smartminer has XMR support though yet. January 30, 2017, 04:35:22 PM
lol its not a device that you should run in your bedroom 
You can not just replace the fans, with quieter once because than it could be that the MXM cards are getting too hot but philipma1957 did some modification to get it a bit quieter but still not enough to run it in a room where you stay at the same time
You can not just replace the fans, with quieter once because than it could be that the MXM cards are getting too hot but philipma1957 did some modification to get it a bit quieter but still not enough to run it in a room where you stay at the same time
pretty sure philip or someone else figured out how to control the fan speeds (though IIRC it needed a VRM and some DIY wiring) - but i think the default fans had gpu temps <60C, so they could probably be slowed down or replaced with slower fans and still keep the cards cool
January 30, 2017, 03:13:37 PM
lol its not a device that you should run in your bedroom
You can not just replace the fans, with quieter once because than it could be that the MXM cards are getting too hot but philipma1957 did some modification to get it a bit quieter but still not enough to run it in a room where you stay at the same time
You can not just replace the fans, with quieter once because than it could be that the MXM cards are getting too hot but philipma1957 did some modification to get it a bit quieter but still not enough to run it in a room where you stay at the same time
January 30, 2017, 02:54:16 PM
Got my PandaMiner but is there any way to replace the fan with queit one, it's fucking loud, is there any plug and play fan a far more quiet? It distract my neighbour lol.
January 26, 2017, 11:28:52 AM
nah server ones are loud as hell and if you thought the panda is loud.... wait till you get those. Get the Linux OS and rom from Eliovp and all you will need is the 1300. OR get a 240V Circut ran.
If you have a 20A 240V plug you can run:
3 Pandas EASY and still be at about 15 Amps.
If you have a 20A 240V plug you can run:
3 Pandas EASY and still be at about 15 Amps.
January 25, 2017, 10:49:17 PM
its a great wall PS, think OCZ over here its 1600 watt 240 VOLT ONLY. I personally don't care since i run on 240 but most will run 120 making it useless for them.
Thanks. Need to find something similar for the US.
EVGA 1300 prob all you need with Eliovp roms but a 1600 is better. Unfortunately they are not 80 bucks hehe
Thanks. I already use EVGA G2 Gold 1300s on my existing Nano rigs with 6 GPUs. They're rock solid! I thought perhaps there might be a server-type PSU that would be a better match for PandaMiner.
January 25, 2017, 04:53:03 PM
its a great wall PS, think OCZ over here its 1600 watt 240 VOLT ONLY. I personally don't care since i run on 240 but most will run 120 making it useless for them.
Thanks. Need to find something similar for the US.
EVGA 1300 prob all you need with Eliovp roms but a 1600 is better. Unfortunately they are not 80 bucks hehe
January 25, 2017, 04:18:13 PM
its a great wall PS, think OCZ over here its 1600 watt 240 VOLT ONLY. I personally don't care since i run on 240 but most will run 120 making it useless for them.
Thanks. Need to find something similar for the US.
January 25, 2017, 04:09:07 PM
its a great wall PS, think OCZ over here its 1600 watt 240 VOLT ONLY. I personally don't care since i run on 240 but most will run 120 making it useless for them.
January 25, 2017, 03:01:06 PM
Big news here, PandaMiner is in hot sales, you can visit our site to win coupons and free power supply![/b][/b][/b][/b][/size][/size][/size][/size][/size]
www.pandaminer
The URL is broken.
I went to their site, which had a huge Sales banner. The price was $2180 for "Buy It", underneath the banner, but when you click the "Buy" button, it shows a price of $2260???
Also, their PSU shows only EU specs. Most PSU run on both US and EU standards. Does anyone know if that's true of the PSU PandaMiner sells? Seems like a great price for a 1600w PSU.
Thanks!
January 24, 2017, 10:31:08 PM
It works pretty well with stock os and I added claymore 9.7 for xmr.
I had to create the claymore USB stick on a different windows pc.
Pretty happy with it running 5932 h with 990 watts is good eff. Not great but good.
I had to create the claymore USB stick on a different windows pc.
Pretty happy with it running 5932 h with 990 watts is good eff. Not great but good.
January 24, 2017, 10:25:54 PM
Big news here, PandaMiner is in hot sales, you can visit our site to win coupons and free power supply![/b][/b][/b][/b][/size][/size][/size][/size][/size]
www.pandaminer
The URL is broken.
January 24, 2017, 09:47:59 PM
Caveat: the default OS install supports 8 GPUs + the onboard at the same time. Pretty easy to quickly switch it to English (if you care), and it will work forever without activation (you lose a few features that don't matter for mining by not activating, but it shouldn't be a licencing problem to leave it like that).
Jump to: