Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 108. (Read 784958 times)

Hi all, I have been mining until yesterday with some  Quadro's P2200 5GB cards but having issues lately.
I was using -rvram -1 -eres 0  but not working anymore.

CUDA error in CudaProgram.cu:204 : out of memory (2)
Failed to initialize search buffers: out of memory

Thanks in advance for any advice!

Miner supports as many gpus as you can get working.  Ive got some 13 gpus rigs on it no issue.
I will add im on linux so maybe a windows (or windows 7) thing.

Does PhoenixMiner have a GPU max limit? I have a RX580 rig that I cant get to run more than 8 GPU's. It will either immediately shutdown after you start the miner and close the window or it will fail to load the dag file and restart the miner after showing a specific GPU error. All RX 580 cards are 8gb and the O/S is Windows 7.

i guess you overclock before DAG creation with a external tool like MSI afterburner, there's the problem, you need to use phoenixminers overclocking feature to make -mcdag 1 work!!

BTW you posted your -cdmpass Avraham20 you need to change that!?

Run phoenixminer as admin, edit your .bat with the following, this is from a Rig with 6x 3070 and 1x 1080, btw straps only works on 1080(ti)s!!:

cd /d %~dp0
PhoenixMiner.exe -proto 2 -coin eth -cdm 0 -pidle 108 -prate 0.18 -nvidia -nvNew 1 -resetoc -fcm 1 -tmax 68 -tt 59 -mcdag 1 -powlim 1:-48,2:-45,3:-45,4:-38,5:-50,6:-46,7:-46 -cclock 1:-680,2:-680,3:-680,4:140,5:-680,6:-680,7:-680 -mclock 1:+1300,2:+1300,3:+1300,4:+1000,5:+1300,6:+1300,7:+1300 -straps 1:0,2:0,3:0,4:2,5:0,6:0,7:0 -gt 0 -mi 12 -tstop 70 -tstart 50

Does anyone know why my rtx 3080 is limited by the miner to a power always of 200w and although the memory goes up nothing happens

https://i.ibb.co/x8qYVBJ/Sin-t-tulo.png

I get "Unable to set memory clock delta to -1000 MHz -error -137"

I am running Evga 3090 with latest nvidia driver 461.72. I am trying to quit using MSI afterburner and insted I am trying to use the phoenixminer overclock settings int the .bat file for my gpu. As a starter I just simply tried to set the memory clock to some not that high value like "-mclock 400".

The DAG file loads, everything runs just fine but my MH/s speed is the basic one and from time to time I get this error "Unable to set memory clock delta to -1000 Mhz - error -137"

*using phoenixminer 5.5c

You may want to know the eth core devs are pushing through a reward reduction. Those profits will not last.
Congratulations on the rig and welcome to the community.

https://bitcointalksearch.org/topic/support-miners-and-oppose-reward-reductions-stopeip1559org-5321264

NEW RIG
WORKING FINE


Eth speed: 378.901 MH/s, shares: 96/0/0, time: 0:17
GPUs: 1: 52.756 MH/s (15) 2: 58.111 MH/s (19) 3: 63.077 MH/s (10) 4: 32.360 MH/s (1) 5: 58.432 MH/s (18) 6: 55.747 MH/s (18) 7: 58.418 MH/s (15)

*** 0:17 *** 3/2 20:38 **************************************
Eth: Mining ETH on ssl://eu1.ethermine.org:5555 for 0:17
Available GPUs for mining:
GPU1: AMD Radeon RX 5700 XT (pcie 3), OpenCL 2.0, 8 GB VRAM, 40 CUs
GPU2: AMD Radeon RX 5700 XT (pcie 12), OpenCL 2.0, 8 GB VRAM, 40 CUs
GPU3: AMD Radeon RX 6800 (pcie 16), OpenCL 2.0, 16 GB VRAM, 30 CUs
GPU4: Radeon RX 580 Series (pcie 18), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU5: AMD Radeon RX 5700 XT (pcie 21), OpenCL 2.0, 8 GB VRAM, 40 CUs
GPU6: AMD Radeon RX 5700 XT (pcie 24), OpenCL 2.0, 8 GB VRAM, 40 CUs
GPU7: AMD Radeon RX 5700 XT (pcie 27), OpenCL 2.0, 8 GB VRAM, 40 CUs
GPU1: 44C 60% 94W, GPU2: 44C 77% 138W, GPU3: 59C 24% 183W, GPU4: 49C 51% 85W, GPU5: 44C 66% 101W, GPU6: 45C 62% 91W, GPU7: 45C 65% 93W
GPU1: cclock 1257 MHz, cvddc 756 mV, mclock 1814 MHz, mvddc 850 mV, Tj 49C, Tmem 74C
GPU2: cclock 1330 MHz, cvddc 756 mV, mclock 1880 MHz, mvddc 850 mV, Tj 54C, Tmem 84C
GPU3: cclock 1244 MHz, cvddc 793 mV, mclock 2092 MHz, Tj 63C
GPU4: cclock 1190 MHz, cvddc 862 mV, mclock 2110 MHz
GPU5: cclock 1344 MHz, cvddc 756 mV, mclock 1890 MHz, mvddc 850 mV, Tj 52C, Tmem 72C
GPU6: cclock 1280 MHz, cvddc 762 mV, mclock 1802 MHz, mvddc 850 mV, Tj 52C, Tmem 64C
GPU7: cclock 1344 MHz, cvddc 756 mV, mclock 1890 MHz, mvddc 850 mV, Tj 51C, Tmem 74C
GPUs power: 784.7 W; cost: 2.54 USD/day
Current -gt 36,37,15,45,29,43,42
Eth: Accepted shares 96 (0 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
Eth: Maximum difficulty of found share: 367.3 GH (!)
Eth: Average speed (5 min): 378.895 MH/s
Eth: Effective speed: 372.45 MH/s; at pool: 372.45 MH/s
Eth: Estimated income: 34.14 USD/day

Hi all,
do you know why PhoenixMiner creates a file called "PhoenixMiner.Vexe" in the same directory (with windows process)?

HI,

i tried searching for an answer but did not found so sorry if it was already addressed.
I am running straps but i want to use Afterburn again to OC my Nvidia cards but afterburn is grey out or disabled any ideas?
Using 5.5c

thanks

Any chance of a -maxRigSpeed option as a flakey gpu occasionally gives a million gazzillion hash rate that wdog doesnt act on and the pool boots the entire rig for it until a manual miner restart. That particular GPU will work fine without reboot. Have been fine tuning that GPU for a few weeks it has no orderly sense its one with Gremlins, have to run it steady very delicate thing....

Thanks

Hello everyone,

I also wanted to try ETH-mining and ordered some new hardware. New mainboard, new CPU and also a new graphics card:

Operating system: Windows 10 Pro, 64-bit
DirectX version: 12.0
GPU processor: GeForce RTX 2070 SUPER
Driver version: 461.72
Driver type: DCH
Direct3D function level: 12_1
CUDA cores: 2560
Core clock: 1905 MHz
Memory data rate: 14.00 Gbps
Memory interface: 256-bit
Memory bandwidth: 448.06 GB/s
Total available graphics memory: 16347 MB
Dedicated video memory: 8192 MB GDDR6
System video memory: 0 MB
Free system memory: 8155 MB
Video-BIOS-Version: 90.04.86.00.47
IRQ: Not used
Bus: PCI Express x16 Gen3
Device ID: 10DE 1E84 87271043
Part number: G180 0012

However, when I start the Phoenixminer the following error message appears:

https://i.ibb.co/J3z18hH/Unbenannt.png

I have already set changes to all possible settings.   Firewall and Windows Defender is disabled.

Does anyone here have a tip for what I could try to get the Phoenixminer to start?

Thank you very much.  

no its more involved now days.
you have to manually do it. look on youtube on the red panda mining channel. the specialize in the 5700xt

new rig

*** 0:06 *** 3/1 21:55 **************************************
Eth: Mining ETH on ssl://eu1.ethermine.org:5555 for 0:06
Available GPUs for mining:
GPU1: AMD Radeon RX 5700 XT (pcie 3), OpenCL 2.0, 8 GB VRAM, 40 CUs
GPU2: AMD Radeon RX 5700 XT (pcie 12), OpenCL 2.0, 8 GB VRAM, 40 CUs
GPU3: AMD Radeon RX 6800 (pcie 16), OpenCL 2.0, 16 GB VRAM, 30 CUs
GPU4: Radeon RX 580 Series (pcie 18), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU5: AMD Radeon RX 5700 XT (pcie 21), OpenCL 2.0, 8 GB VRAM, 40 CUs
GPU6: AMD Radeon RX 5700 XT (pcie 24), OpenCL 2.0, 8 GB VRAM, 40 CUs
GPU7: AMD Radeon RX 5700 XT (pcie 27), OpenCL 2.0, 8 GB VRAM, 40 CUs
GPU1: 52C 0% 92W, GPU2: 45C 58% 132W, GPU3: 57C 25% 177W, GPU4: 46C 68% 84W, GPU5: 44C 55% 99W, GPU6: 45C 56% 89W, GPU7: 45C 58% 90W
GPU1: cclock 1162 MHz, cvddc 756 mV, mclock 1812 MHz, mvddc 850 mV, Tj 57C, Tmem 80C
GPU2: cclock 1212 MHz, cvddc 756 mV, mclock 1846 MHz, mvddc 850 mV, Tj 55C, Tmem 82C
GPU3: cclock 1242 MHz, cvddc 793 mV, mclock 2088 MHz, Tj 61C
GPU4: cclock 1150 MHz, cvddc 862 mV, mclock 2100 MHz
GPU5: cclock 1225 MHz, cvddc 756 mV, mclock 1880 MHz, mvddc 850 mV, Tj 53C, Tmem 72C
GPU6: cclock 1227 MHz, cvddc 756 mV, mclock 1802 MHz, mvddc 850 mV, Tj 52C, Tmem 64C
GPU7: cclock 1223 MHz, cvddc 756 mV, mclock 1880 MHz, mvddc 850 mV, Tj 50C, Tmem 70C
GPUs power: 762.8 W; cost: 2.47 USD/day
Current -gt 21,38,203,66,36,25,37
Eth: Accepted shares 36 (0 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
Eth: Maximum difficulty of found share: 995.0 GH (!)
Eth: Average speed (5 min): 361.339 MH/s
Eth: Effective speed: 351.22 MH/s; at pool: 351.22 MH/s
Eth: Estimated income: 30.62 USD/day

Eth: New job #512792a9 from ssl://eu1.ethermine.org:5555; diff: 4000MH
Eth speed: 361.331 MH/s, shares: 36/0/0, time: 0:06
GPUs: 1: 51.839 MH/s (3) 2: 53.500 MH/s ( 3: 62.940 MH/s (6) 4: 31.745 MH/s (3) 5: 54.474 MH/s ( 6: 52.408 MH/s (3) 7: 54.425 MH/s (5)


i config now and try

I have a 5700 xt on the way....

With 5700 xt, Do you still use the 1 click bios editor and then change core/mem in phoenix?  And can someone post some starting numbers for MSI RX 5700 XT 8 gig

Thanks

Funny it wasnt this card thats why nothing worked, when I installed this card, it was another card I had to cut back on the memory that had been mining fine. Strange

Hi guys,
What are your h/s for RX6800 ?

Thanks

Hey there, getting these errors with some NVIDIA rigs, some insight could be good. Thanks!


Clocks:

Core: +90
Memory: +580
PL: 140

Cards: GeForce GTX 1070 8119 MB · Gigabyte Micron GDDR5 · 86.04.50.00.7A

Edit: Also getting some rejected shares

ETH Only I get ~28 MH/s 1070, ~36 MH/s 1080 and ~45 MH/s 1080 Ti.

PhonenixMiner v5.5c Windows 10 20H2 Nvidia GeForce 461.72 Driver


MSI Afterburner Overclock Settings:


PhoenixMiner config.txt:

answer please! I have 1080 ti and 1070. The drivers are the newest. PhoenixMiner 5.5c. mining ether
on phoenix I have:
1080 ti - 15 mh / s
1070 - 17 mh / s

on gminer I have:
1080 ti - 36 mh / s
1070 - 28 mh / s

  The overclocking is the same, the temperatures are the same. Why is phoenix showing so little?