PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 106.

razvan25a

newbie

Activity: 1

Merit: 0

Hi.I config the Phoenix Miner i put my wallet and all .When i enter on ethermine.org and paste my wallet in search says workers active/ inactive 0/0 why?If anyone can help me to config this i will be grateful.Please

RedRockMining

member

Activity: 127

Merit: 10

Quote from: RedRockMining on March 05, 2021, 09:20:14 PM

Quote from: miner29 on March 05, 2021, 07:42:22 PM

Quote from: RedRockMining on March 05, 2021, 06:18:06 PM

Anyone know why Phoenixminer lowers the core clockrate on some GPUs (and not others of the same model on the same rig) after they start up and successfully hash at ~50 MH/s for a few minutes? I am starting all my RX 5700s at 1300/900 (core/memory) and they all start out at ~50 then for some reason PM lowers the clock rates on some which end up hashing at around 40 MH/s or less. I am setting GT value at startup so it's not auto-tuning. Any thoughts?

Huh

Have you tried letting it autotune? ive noticed that sometimes the hardsetting of GT values results in lower hash on subsequent boots. Since most of my rigs are stable i dont bother setting and get consistently high hashes. 53-54mhs without bios mod on 1350/920/775. With bios mod about 56.7mhs per 5700xt...but i need to spend some time tuning them...57-60 should be achievable.

Thanks. Yes, same result when I let it auto-tune. One thing I just thought of is it might be SMOS that is lowering them although I haven 't seen anything in the SMOS interface that suggests that. Not sure if I can set the clock speeds directly in PM but will look into that next...

Interesting. I get slightly better total hashrate when I set the clocks and voltage directly in PM but the clocks still drop in the first minute or so on a few individual GPUs. I'm now thinking it could be the drivers; PM documentation mentions that the drivers sometimes don't hold the specified voltages but maybe that applies to clocks too? Not sure...

RedRockMining

member

Activity: 127

Merit: 10

Quote from: miner29 on March 05, 2021, 07:42:22 PM

Quote from: RedRockMining on March 05, 2021, 06:18:06 PM

Anyone know why Phoenixminer lowers the core clockrate on some GPUs (and not others of the same model on the same rig) after they start up and successfully hash at ~50 MH/s for a few minutes? I am starting all my RX 5700s at 1300/900 (core/memory) and they all start out at ~50 then for some reason PM lowers the clock rates on some which end up hashing at around 40 MH/s or less. I am setting GT value at startup so it's not auto-tuning. Any thoughts?

Huh

Have you tried letting it autotune? ive noticed that sometimes the hardsetting of GT values results in lower hash on subsequent boots. Since most of my rigs are stable i dont bother setting and get consistently high hashes. 53-54mhs without bios mod on 1350/920/775. With bios mod about 56.7mhs per 5700xt...but i need to spend some time tuning them...57-60 should be achievable.

Thanks. Yes, same result when I let it auto-tune. One thing I just thought of is it might be SMOS that is lowering them although I haven 't seen anything in the SMOS interface that suggests that. Not sure if I can set the clock speeds directly in PM but will look into that next...

miner29

full member

Activity: 1275

Merit: 141

Quote from: RedRockMining on March 05, 2021, 06:18:06 PM

Anyone know why Phoenixminer lowers the core clockrate on some GPUs (and not others of the same model on the same rig) after they start up and successfully hash at ~50 MH/s for a few minutes? I am starting all my RX 5700s at 1300/900 (core/memory) and they all start out at ~50 then for some reason PM lowers the clock rates on some which end up hashing at around 40 MH/s or less. I am setting GT value at startup so it's not auto-tuning. Any thoughts?

Huh

Have you tried letting it autotune? ive noticed that sometimes the hardsetting of GT values results in lower hash on subsequent boots. Since most of my rigs are stable i dont bother setting and get consistently high hashes. 53-54mhs without bios mod on 1350/920/775. With bios mod about 56.7mhs per 5700xt...but i need to spend some time tuning them...57-60 should be achievable.

RedRockMining

member

Activity: 127

Merit: 10

Anyone know why Phoenixminer lowers the core clockrate on some GPUs (and not others of the same model on the same rig) after they start up and successfully hash at ~50 MH/s for a few minutes? I am starting all my RX 5700s at 1300/900 (core/memory) and they all start out at ~50 then for some reason PM lowers the clock rates on some which end up hashing at around 40 MH/s or less. I am setting GT value at startup so it's not auto-tuning. Any thoughts?

Huh

Complivit91

newbie

Activity: 22

Merit: 0

Quote from: bit-sokol on March 05, 2021, 06:48:48 AM

Quote from: Moxymore on March 05, 2021, 05:21:37 AM

Quote from: aveee on March 05, 2021, 04:32:08 AM

Mega blocked all phoenix downloads, could someone reupload the original zipped 5.5c version for windows somewhere (going to crc check anyway) Thanks !! 🙌

+1 Since all other links can't be trusted, I'm waiting for a message of the original author. I'll send him a message.

It makes no sense to write in a personal message. Because he has nothing to do with it, but MEGA is to blame.
Write directly to MEGA and attach the link.
Write: You deleted the file [https://mega.nz/#F!2VskDJrI!lsQsz1CdDe8x5cH3L8QaBw] by mistake. This is a cryptocurrency mining program, not a virus. Please restore it.
Thank.
[email protected]
[email protected]
[email protected]

I agree. The more they write, the faster they will unfreeze.

toynn

newbie

Activity: 14

Merit: 0

Quote from: suntrip23 on March 04, 2021, 03:44:02 PM

Quote from: Kiawpqe on March 04, 2021, 03:30:52 PM

Quote from: suntrip23 on March 04, 2021, 03:26:25 PM

Quote from: Kiawpqe on March 04, 2021, 03:21:08 PM

PhoenixMiner.exe -pool eu1.ethermine.org:4444 -wal 0x7994bfc5679d5c9aeeb0dbe6b48fed342dfee370.Rig001 -log 0 -tt 70 -tstop 85 -tstart 70 - fanmin 50
pause

try it bro

same problem

https://drive.google.com/file/d/1HSBT32d0pz-ZaWNWoi_C5Ny4QD2kz8ur/view?usp=sharing

try

-pool eu1.ethermine.org:5555

doesn't work...

suntrip23 - From your screenshot its seems clear that your pool/wallet info isn't being accepted from the command-line settings during miner startup so that PhoenixMiner next tries to use what is in the epools.txt file which are just examples so they don't work either. I would try to run your command-line settings from command prompt yourself (not from the bat file) and see if the same error happens or you may see other errors to help tbshoot. Alternatively get your settings in to the config.txt file and don't use the command-line settings, just launch the miner.

UselessGuru

jr. member

Activity: 200

Merit: 3

Quote from: Vann on March 05, 2021, 06:59:50 AM

Quote from: TBOEMC on March 05, 2021, 06:44:01 AM

Quote from: Moxymore on March 05, 2021, 05:21:37 AM

Quote from: aveee on March 05, 2021, 04:32:08 AM

Mega blocked all phoenix downloads, could someone reupload the original zipped 5.5c version for windows somewhere (going to crc check anyway) Thanks !! 🙌

+1 Since all other links can't be trusted, I'm waiting for a message of the original author. I'll send him a message.

This is last 5.5c version downloaded few days before MEGA-removing...
If anyone wants to upload it to any other site, let me know. I have account only at WebShare

https://webshare.cz/#/file/weguQcRSMH

DO NOT trust this file! Or any other file that doesn't match the SHASUM of the original archive hash listed in the OP.

Quote

If you want to check the integrity of the downloaded file, please use the following hashes (you need the last file PhoenixMiner_NVRTC_Windows.zip only if you want to mine BCI with Nvdia cards under Windows):
Code:

   File: PhoenixMiner_5.5c_Windows.zip
   ===================================
   SHA-1: 9a3efe6130ba21ab2ade9df38ff9d52a539d9693
SHA-256: 0bb20989cd107c6b65d08da30f014df0b3cb94f8124253e2caee1dfa99431c2d
SHA-512: 2e1aa259f6519d6759ccf679bf1b989c36fe504c9066cc3ba79537bf34129fb168b2956e385a4cf 593e45c3a22e89590319870fb502ff13a371932aad441b250

   File: PhoenixMiner_5.5c_Linux.tar.gz
   ====================================
   SHA-1: 43bc9221582c8e90188fb1b416df14a8259d5b4e
SHA-256: 66914e1b5011c35cf6af3f0d3e7540f5fa1bbe1563105fd242a67a96437b8e69
SHA-512: 1088fcfd06b1bf63a3ab0d92089504b37e634bc138290c432797594ed25d37f8e5a658cf4124b6b b4495592b2b90f89bf0a68d03f51ce97e61b69efbe0667943

   File: PhoenixMiner_NVRTC_Windows.zip
   ====================================
   SHA-1: ff6fa5e018adbd52caf631c42b7c2fac7ce48a51
SHA-256: 8087757169405d51ea8ba818347fb05d0450aef985c29272165070346eb5a54a
SHA-512: 7b2d832f7f40578bb1f501d5174467f5ae06612e601dab769fd56d39da48a471b18c6373435a485 155f70fec4017d8378797bf1e1dfe5d62fee30fa6a1d992c4

Code:

sha512sum PhoenixMiner_5.5c_Windows.zip
5b392b358184c57f9762f6969ca863771c43ef5bd28d72d66dbcf30e3a4490b524297413c12a62539b09fb3cb48ce6fe54021d51826bc9e40c1bc9badb87f063  PhoenixMiner_5.5c_Windows.zip

We keep a miner repository for NemosMiner here:
https://github.com/Minerx117/miners/releases/download/PhoenixMiner/PhoenixMiner_5.5c_Windows.zip
The PhoenixMiner package is a merge of PhoenixMiner_5.5c_Windows.zip & PhoenixMiner_NVRTC_Windows.zip.
Use @ your own risk.

Bagge6

newbie

Activity: 22

Merit: 0

EDIT:

parple

newbie

Activity: 15

Merit: 0

Quote from: Frmg on March 04, 2021, 09:25:05 PM

Whats wrong with this script?

phoenixminer.exe -pool eth-us-east1.nanopool.org:9999 -wal 0x000000000000000000000000000000.worker/password -mode 1 -proto 2 -coin eth -cdm 0 -amd -acm -mi 10 -eres 0 -dagrestart 2 -log 0 -resetoc -gpow 85 -ppf 85 -fanmin 75 -ttli 78

I wanna restrict my Rx580 to 85% of their power.

Try -powlim -15

TBOEMC

jr. member

Activity: 41

Merit: 1

Quote from: Vann on March 05, 2021, 06:59:50 AM

Quote from: TBOEMC on March 05, 2021, 06:44:01 AM

Quote from: Moxymore on March 05, 2021, 05:21:37 AM

Quote from: aveee on March 05, 2021, 04:32:08 AM

Mega blocked all phoenix downloads, could someone reupload the original zipped 5.5c version for windows somewhere (going to crc check anyway) Thanks !! 🙌

+1 Since all other links can't be trusted, I'm waiting for a message of the original author. I'll send him a message.

This is last 5.5c version downloaded few days before MEGA-removing...
If anyone wants to upload it to any other site, let me know. I have account only at WebShare

https://webshare.cz/#/file/weguQcRSMH

DO NOT trust this file! Or any other file that doesn't match the SHASUM of the original archive hash listed in the OP.

Thank you for your warning, but I am not "spam farm" or any other idiotic liar with virus in miner

There were no chance to get Miner from MEGA site, so ppl asked to upload last version from anyone and post it to download.
So i did it...

But OK, i will delete it and not share with other...

Vann

hero member

Activity: 1036

Merit: 606

Quote from: TBOEMC on March 05, 2021, 06:44:01 AM

Quote from: Moxymore on March 05, 2021, 05:21:37 AM

Quote from: aveee on March 05, 2021, 04:32:08 AM

Mega blocked all phoenix downloads, could someone reupload the original zipped 5.5c version for windows somewhere (going to crc check anyway) Thanks !! 🙌

+1 Since all other links can't be trusted, I'm waiting for a message of the original author. I'll send him a message.

This is last 5.5c version downloaded few days before MEGA-removing...
If anyone wants to upload it to any other site, let me know. I have account only at WebShare

https://webshare.cz/#/file/weguQcRSMH

DO NOT trust this file! Or any other file that doesn't match the SHASUM of the original archive hash listed in the OP.

Quote

If you want to check the integrity of the downloaded file, please use the following hashes (you need the last file PhoenixMiner_NVRTC_Windows.zip only if you want to mine BCI with Nvdia cards under Windows):
Code:

   File: PhoenixMiner_5.5c_Windows.zip
   ===================================
   SHA-1: 9a3efe6130ba21ab2ade9df38ff9d52a539d9693
SHA-256: 0bb20989cd107c6b65d08da30f014df0b3cb94f8124253e2caee1dfa99431c2d
SHA-512: 2e1aa259f6519d6759ccf679bf1b989c36fe504c9066cc3ba79537bf34129fb168b2956e385a4cf 593e45c3a22e89590319870fb502ff13a371932aad441b250

   File: PhoenixMiner_5.5c_Linux.tar.gz
   ====================================
   SHA-1: 43bc9221582c8e90188fb1b416df14a8259d5b4e
SHA-256: 66914e1b5011c35cf6af3f0d3e7540f5fa1bbe1563105fd242a67a96437b8e69
SHA-512: 1088fcfd06b1bf63a3ab0d92089504b37e634bc138290c432797594ed25d37f8e5a658cf4124b6b b4495592b2b90f89bf0a68d03f51ce97e61b69efbe0667943

   File: PhoenixMiner_NVRTC_Windows.zip
   ====================================
   SHA-1: ff6fa5e018adbd52caf631c42b7c2fac7ce48a51
SHA-256: 8087757169405d51ea8ba818347fb05d0450aef985c29272165070346eb5a54a
SHA-512: 7b2d832f7f40578bb1f501d5174467f5ae06612e601dab769fd56d39da48a471b18c6373435a485 155f70fec4017d8378797bf1e1dfe5d62fee30fa6a1d992c4

Code:

sha512sum PhoenixMiner_5.5c_Windows.zip
5b392b358184c57f9762f6969ca863771c43ef5bd28d72d66dbcf30e3a4490b524297413c12a62539b09fb3cb48ce6fe54021d51826bc9e40c1bc9badb87f063  PhoenixMiner_5.5c_Windows.zip

miner1987

newbie

Activity: 18

Merit: 0

Quote from: bit-sokol on March 05, 2021, 06:48:48 AM

Quote from: Moxymore on March 05, 2021, 05:21:37 AM

Quote from: aveee on March 05, 2021, 04:32:08 AM

Mega blocked all phoenix downloads, could someone reupload the original zipped 5.5c version for windows somewhere (going to crc check anyway) Thanks !! 🙌

+1 Since all other links can't be trusted, I'm waiting for a message of the original author. I'll send him a message.

It makes no sense to write in a personal message. Because he has nothing to do with it, but MEGA is to blame.
Write directly to MEGA and attach the link.
Write: You deleted the file [https://mega.nz/#F!2VskDJrI!lsQsz1CdDe8x5cH3L8QaBw] by mistake. This is a cryptocurrency mining program, not a virus. Please restore it.
Thank.
[email protected]
[email protected]
[email protected]

It looks like mega algorithms have flagged some miners as a virus. GitHub does the same with legal repositories. This was once with Claymore, then Mega was restored to him.
Also, google chrome blocks downloading from sites (I checked sha-256 the same (for .exe file)) there are simply configured wallets in the configuration.
Everything is blocked: mega, GitHub and sites))

...Too bad, phoenixminer had the best documentation on the internet thanks to blogs and sites....

Quote from: bit-sokol on March 05, 2021, 06:48:48 AM

It makes no sense to write in a personal message. Because he has nothing to do with it, but MEGA is to blame.
Write directly to MEGA and attach the link.
Write: You deleted the file [https://mega.nz/#F!2VskDJrI!lsQsz1CdDe8x5cH3L8QaBw] by mistake. This is a cryptocurrency mining program, not a virus. Please restore it.
Thank.
[email protected]
[email protected]
[email protected]

I agree with you bro. Phoenix will not do anything himself, let's write to them ourselves in mega support.

bit-sokol

newbie

Activity: 48

Merit: 0

Quote from: Moxymore on March 05, 2021, 05:21:37 AM

Quote from: aveee on March 05, 2021, 04:32:08 AM

Mega blocked all phoenix downloads, could someone reupload the original zipped 5.5c version for windows somewhere (going to crc check anyway) Thanks !! 🙌

+1 Since all other links can't be trusted, I'm waiting for a message of the original author. I'll send him a message.

It makes no sense to write in a personal message. Because he has nothing to do with it, but MEGA is to blame.
Write directly to MEGA and attach the link.
Write: You deleted the file [https://mega.nz/#F!2VskDJrI!lsQsz1CdDe8x5cH3L8QaBw] by mistake. This is a cryptocurrency mining program, not a virus. Please restore it.
Thank.
[email protected]
[email protected]
[email protected]

TBOEMC

jr. member

Activity: 41

Merit: 1

Quote from: Moxymore on March 05, 2021, 05:21:37 AM

Quote from: aveee on March 05, 2021, 04:32:08 AM

Mega blocked all phoenix downloads, could someone reupload the original zipped 5.5c version for windows somewhere (going to crc check anyway) Thanks !! 🙌

+1 Since all other links can't be trusted, I'm waiting for a message of the original author. I'll send him a message.

This is last 5.5c version downloaded few days before MEGA-removing...
If anyone wants to upload it to any other site, let me know. I have account only at WebShare

https://webshare.cz/#/file/weguQcRSMH

Moxymore

full member

Activity: 159

Merit: 100

Quote from: aveee on March 05, 2021, 04:32:08 AM

Mega blocked all phoenix downloads, could someone reupload the original zipped 5.5c version for windows somewhere (going to crc check anyway) Thanks !! 🙌

+1 Since all other links can't be trusted, I'm waiting for a message of the original author. I'll send him a message.

aveee

newbie

Activity: 1

Merit: 0

Mega blocked all phoenix downloads, could someone reupload the original zipped 5.5c version for windows somewhere (going to crc check anyway) Thanks !! 🙌

papajo_r

newbie

Activity: 9

Merit: 0

Ok a noob question here, I want to mine in ethermine using phoenix but I dont understand how the "worker" naming is going to work

so this is my default script

Code:

PhoenixMiner.exe -pool eu1.ethermine.org:4444 -wal 0xBwalletcode  -worker asus -epsw x -mode 1 -log 1 -mport 0 -etha 0 -ftime 55 -retrydelay 1 -coin eth

pause

I just paste my wallet code and leave everything else as is? I dont know why it has "asus" next to

Code:

-worker

should I delete that?

no dots? e.g -wal walletname.workername ?

Does it matter what worker name I have ? I mean should I somehow register the worker name on etheremine's webpage? or should I just delete the worker name and leave it blank?

Frmg

newbie

Activity: 10

Merit: 0

Whats wrong with this script?

phoenixminer.exe -pool eth-us-east1.nanopool.org:9999 -wal 0x000000000000000000000000000000.worker/password -mode 1 -proto 2 -coin eth -cdm 0 -amd -acm -mi 10 -eres 0 -dagrestart 2 -log 0 -resetoc -gpow 85 -ppf 85 -fanmin 75 -ttli 78

I wanna restrict my Rx580 to 85% of their power.

Deafran

jr. member

Activity: 49

Merit: 4

Quote from: suntrip23 on March 04, 2021, 04:11:14 PM

Quote from: Kiawpqe on March 04, 2021, 03:55:38 PM

Quote from: suntrip23 on March 04, 2021, 03:52:14 PM

https://drive.google.com/file/d/1hrHoThm0awdnR_b7dapyoUmOPw41_9Sp/view?usp=sharing

you conect to etherm.....:4444
not to
ssl://eu1.ethermine.org:5555

doesn't work anyway

https://drive.google.com/file/d/1vYcQFVL4JSJvoKWqHFQqBkym1qEIFRS4/view?usp=sharing

maybe I need another drivers for my nvidia 1080ti?

try this

start PhoenixMiner.exe -pool eu1.ethermine.org:4444 -wal 0xecxxxxx -worker Zinc -epsw x -mode 1 -nvNew 1 -Rmode 1 -log 0 -mport 0 -etha 0 -mcdag 1 -retrydelay 1 -coin eth
pause

Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 106. (Read 784958 times)