Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 194. (Read 784965 times)
November 28, 2020, 04:12:24 PM
Everything is OK.
November 28, 2020, 03:56:02 PM
I Mine ETC at AMD RX 470 4 GB and RX 570 4GB 31.150 Mhs DRIVER ver 20.4.2 !
-rxboost 100 -daglim 1 -straps 3
-rxboost 100 -daglim 1 -straps 3
November 28, 2020, 03:53:31 PM
I need to report, that using 5.3b insted 5.1c (HiveOs) i`m getting few mhash per rig more.
i`ve started to use : -rxboost 1 -gt 1 - what else can i use ?
My stuff - RX580, p106, 1660 super, 1660Ti, RX5700.
i`ve started to use : -rxboost 1 -gt 1 - what else can i use ?
My stuff - RX580, p106, 1660 super, 1660Ti, RX5700.
November 28, 2020, 03:31:11 PM
I cant seem to extract the file folder from the zip (5.3b)... why is that? it keeps giving me an error for all the .bat files:
0x80004005: Unspecified Error
0x80004005: Unspecified Error
November 28, 2020, 03:19:51 PM
hello guys , is it possible to carry on running my rx570 8gb card on 5.2e (eth) and use my 2x rx470 4gb on 5.3b (etc)?
if so whats the command please , thanks in advance.
if you look up you will find answer. it was answered 10 timesif so whats the command please , thanks in advance.
has it? i thought 5.3b was a new release for ETC which isnt working correctly until the fork later today? or maybe you can see into the future questions and answers, or maybe its the same commands as ETH?
my 480 4gb is working at over 30 hashes now.
works great
November 28, 2020, 03:16:37 PM
I Mine ETC at 4 GB! 
November 28, 2020, 03:05:58 PM
IMPORTANT! Ethereum Classic (ETC) network switched to a modified version of ethash, called ETCHash. If you are mining ETC you must upgrade to PhoenixMiner 5.3b or later, otherwise you will get only rejected shares when mining ETC.
The current ETC DAG is 195 instead of 390, with corresponding "shrinking" of the DAG buffer to about 2.5 GB. With this DAG size you will be able to mine with 3GB and 4GB cards without problems. After that, each DAG epoch on the ETC network will be twice as long, so the DAG size will grow with half the speed as before. As a result, it will be possible to mine ETC with 4GB cards for about 4 more years.
The switch went without problems, all our test rigs switched to the new DAG and are mining normally. You may need to run auto-tuning again if to get an optimal speed with the new DAG size.
The current ETC DAG is 195 instead of 390, with corresponding "shrinking" of the DAG buffer to about 2.5 GB. With this DAG size you will be able to mine with 3GB and 4GB cards without problems. After that, each DAG epoch on the ETC network will be twice as long, so the DAG size will grow with half the speed as before. As a result, it will be possible to mine ETC with 4GB cards for about 4 more years.
The switch went without problems, all our test rigs switched to the new DAG and are mining normally. You may need to run auto-tuning again if to get an optimal speed with the new DAG size.
November 28, 2020, 03:05:48 PM
Sapphire Radeon 580/480 8gb, P104/106 cards works well after Epoch 195.
Hello good old hashrate!
Yep it is working, happy miners again Hello good old hashrate!
November 28, 2020, 02:52:04 PM
Sapphire Radeon 580/480 8gb, P104/106 cards works well after Epoch 195.
Hello good old hashrate!
Hello good old hashrate!
November 28, 2020, 02:03:46 PM
go install AMD DRIVER ver 20.4.2
after update my AMD Driver using 20.4.2, i've still having problem like before..
- 5 GPu work only 4
- RX480 just get 9mhs
- after a few minutes miner shows error: Allocating buffers failed with clCreatedBuffers (-61) and stop
my problem never solved..
sad mode: ON
1st make sure just run only 1 RX card. DDU the driver on safe mode then install 1card RX then install 20.11.1 driver. after turn compute mode on. after make your settings and OC setting using amd wattman or overdriventool. look what you get with 1 card if it is hashing normal then keep adding your cards back. is it bios modded cards? and delete all those commands just run clean phoenixminer.exe. you can leave proto 4 and stales 0 pass x for nicehash.
Your solution is the next:
1. win10
2. driver 20.4.2
3. patch by 'atikmdag-patcher-1.4.8'
4. switch to compute mode by 'AMD-Compute-Switcher'
restart and enjoy)))
November 28, 2020, 01:37:42 PM
go install AMD DRIVER ver 20.4.2
after update my AMD Driver using 20.4.2, i've still having problem like before..
- 5 GPu work only 4
- RX480 just get 9mhs
- after a few minutes miner shows error: Allocating buffers failed with clCreatedBuffers (-61) and stop
my problem never solved..
sad mode: ON
1st make sure just run only 1 RX card. DDU the driver on safe mode then install 1card RX then install 20.11.1 driver. after turn compute mode on. after make your settings and OC setting using amd wattman or overdriventool. look what you get with 1 card if it is hashing normal then keep adding your cards back. is it bios modded cards? and delete all those commands just run clean phoenixminer.exe. you can leave proto 4 and stales 0 pass x for nicehash.
November 28, 2020, 01:06:25 PM
can someone tell me how can we set pool difficulty manualy on the miner ?
didn't find it anywhere
even on the readme.txt
didn't find it anywhere
even on the readme.txt November 28, 2020, 12:26:30 PM
if i have rig with first card 8GB and rest 4GB, will it mine ETH after block exceeds 4GB ? if not Phoenix miner, any other miner which will allow to mine ETH with current setup?
Not without huge penality. Just because your first card is 8gb each card has to have its own copy of DAG..so cards with 4gb are already mining slower and will continue to degrade even with zombie mode.
Might consider switching to mining etc as they are reducing dag to 3gb so 4gb cards can mine. But ywa the end of 4gb eth mining is very soon.
November 28, 2020, 12:17:22 PM
if i have rig with first card 8GB and rest 4GB, will it mine ETH after block exceeds 4GB ? if not Phoenix miner, any other miner which will allow to mine ETH with current setup?
November 28, 2020, 10:30:17 AM
Windows 10 please....
also could be bad gpu or risers
ok,.. i'll try to update to win10
November 28, 2020, 10:10:09 AM
go install AMD DRIVER ver 20.4.2
after update my AMD Driver using 20.4.2, i've still having problem like before..
- 5 GPu work only 4
- RX480 just get 9mhs
- after a few minutes miner shows error: Allocating buffers failed with clCreatedBuffers (-61) and stop
https://i.postimg.cc/7ZByTSJR/miner2.jpg
my problem never solved..
sad mode: ON
Windows 10 please....
also could be bad gpu or risers
November 28, 2020, 10:02:48 AM
go install AMD DRIVER ver 20.4.2
after update my AMD Driver using 20.4.2, i've still having problem like before..
- 5 GPu work only 4
- RX480 just get 9mhs
- after a few minutes miner shows error: Allocating buffers failed with clCreatedBuffers (-61) and stop
https://i.postimg.cc/7ZByTSJR/miner2.jpg
my problem never solved..
sad mode: ON
November 28, 2020, 09:58:06 AM
very frustated to run phoenixminer, while last use other miner.
i get error: Allocating buffers failed with clCreatedBuffers (-61)
https://i.ibb.co/8KcdKX6/error.jpg
i use 3X RX480 8Gb + 2X R9 390 8Gb
running on nicehash using bat file
can someone tell me about this error and how to solve it.
thank you
Look's like Windows 7 with blockchain drivers. You need Windows 10 and latest drivers. i get error: Allocating buffers failed with clCreatedBuffers (-61)
https://i.ibb.co/8KcdKX6/error.jpg
i use 3X RX480 8Gb + 2X R9 390 8Gb
running on nicehash using bat file
can someone tell me about this error and how to solve it.
thank you
November 28, 2020, 08:22:59 AM
Ok, I tried :
But connexion to pool is rejected.
Nobody is using this pool now. I supposed, it is broken...
Pool don't like rig name - remove it and leave only walletCode:
PhoenixMiner.exe -bench 400 -coin ETC -pool mordor.pool.fault.dev:8008 -wal 0x008c26f3a2Ca8bdC11e5891e0278c9436B6F5d1E.Rig001
But connexion to pool is rejected.
Nobody is using this pool now. I supposed, it is broken...
You're right, without rig name connexion is OK
But all shares are rejected...
I will test live in few hours.
November 28, 2020, 08:08:48 AM
Ok, I tried :
But connexion to pool is rejected.
Nobody is using this pool now. I supposed, it is broken...
Pool don't like rig name - remove it and leave only wallet Code:
PhoenixMiner.exe -bench 400 -coin ETC -pool mordor.pool.fault.dev:8008 -wal 0x008c26f3a2Ca8bdC11e5891e0278c9436B6F5d1E.Rig001
But connexion to pool is rejected.
Nobody is using this pool now. I supposed, it is broken...
Jump to: