such a shame my 7950 is only managing 11MH on ETC while this dude on youtube pulling 20+MH with 3GB 1060's ,i guess the old GCN's need a custom kernel / tweaking or something
https://www.youtube.com/watch?v=4eTUDikXztY&t
Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 190. (Read 784965 times)
December 01, 2020, 07:19:32 AM
December 01, 2020, 05:39:53 AM
Try to switch to another server. Try eu1
Thank you for reply.same result, i even switched to another pool. this happens after 20 hours straight mining. Then i must restart the rig. after 20 hours mining miner tries to connect Devfee and it gives this error then all troubles starts. i dont know it something to do with my rig or miner.
after restart the rig all ok Devfee connecting but after 20 hours same thing again.
show us your commandline please.
i have no issues mining 2 days with 5.3b
My MH/s drop from 30.8 to 24 on my 4GB RX470.
My settings:
Bios: MOD
Drivers: Latest adrenalin
Miner: Phoenix 5.3B (before that I used 5.1C)
FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
-epsw x -mode 1 -Rmode 1 -log 0 -mport 0 -etha 0 -retrydelay 1 -ftime 10 -tt 75 -tstop 80 -tstart 60 -fanmin 10 -coin eth -amd -cclock 1130 -mclock 2030 -cvddc 875 -mvddc 875 -daglim 1
What can I do?
I also lost few MHs on my rig with Sapphire RX580
Dropped from 32.7MH/s to 31.9 MH/s
My settings:
Bios: MOD
Drivers: Latest adrenalin
Miner: Phoenix 5.3B (before that I used 5.1C)
FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
-epsw x -mode 1 -Rmode 1 -log 0 -mport 0 -etha 0 -retrydelay 1 -ftime 10 -tt 75 -tstop 80 -tstart 60 -fanmin 10 -coin eth -amd -cclock 1130 -mclock 2030 -cvddc 875 -mvddc 875 -daglim 1
What can I do?
I also lost few MHs on my rig with Sapphire RX580
Dropped from 32.7MH/s to 31.9 MH/s
Mining ETH? your 4GB has not enough Vram to hold the DAG file.
You can mine ETH til 27. 12 with 4gb I think, I can still mine it but i lost some MH/s with them. Ofcoure you can mine it, you just need to increase VR ram.
It depends on driver, OS and so on. On most of my 4GB rigs, the RX 570 4GB only produce 24mh and raising the virtual ram change nothing. 4GB are not enough to hold the dag, your hashrate decrease with every new epoch dude (every 5 days)
Try to switch to another server. Try eu1
Thank you for reply.same result, i even switched to another pool. this happens after 20 hours straight mining. Then i must restart the rig. after 20 hours mining miner tries to connect Devfee and it gives this error then all troubles starts. i dont know it something to do with my rig or miner.
after restart the rig all ok Devfee connecting but after 20 hours same thing again.
show us your commandline please.
i have no issues mining 2 days with 5.3b
PhoenixMiner.exe -pool ssl://eu1-etc.ethermine.org:5555 -wal 0x17de26c0492fe296909dad7c979a8fa767de0252.RIG_4G -coin etc -gpus 2,5 -cclock 1150 -cvddc 900 -mclock 2000 -mvddc 920 -mt 1 -mi 11 -powlim -10 -amd -log 0 -rxboost 1 -gt 57
Can you try -pool eu1-etc.ethermine.org:4444
i tried it same thing. not only here. i tried 2miners pool and binance pool same result. i get socket error after 20 hours mining. it happens when Devfee tries to connect and it fails
December 01, 2020, 05:33:54 AM
Try to switch to another server. Try eu1
Thank you for reply.same result, i even switched to another pool. this happens after 20 hours straight mining. Then i must restart the rig. after 20 hours mining miner tries to connect Devfee and it gives this error then all troubles starts. i dont know it something to do with my rig or miner.
after restart the rig all ok Devfee connecting but after 20 hours same thing again.
show us your commandline please.
i have no issues mining 2 days with 5.3b
My MH/s drop from 30.8 to 24 on my 4GB RX470.
My settings:
Bios: MOD
Drivers: Latest adrenalin
Miner: Phoenix 5.3B (before that I used 5.1C)
FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
-epsw x -mode 1 -Rmode 1 -log 0 -mport 0 -etha 0 -retrydelay 1 -ftime 10 -tt 75 -tstop 80 -tstart 60 -fanmin 10 -coin eth -amd -cclock 1130 -mclock 2030 -cvddc 875 -mvddc 875 -daglim 1
What can I do?
I also lost few MHs on my rig with Sapphire RX580
Dropped from 32.7MH/s to 31.9 MH/s
My settings:
Bios: MOD
Drivers: Latest adrenalin
Miner: Phoenix 5.3B (before that I used 5.1C)
FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
-epsw x -mode 1 -Rmode 1 -log 0 -mport 0 -etha 0 -retrydelay 1 -ftime 10 -tt 75 -tstop 80 -tstart 60 -fanmin 10 -coin eth -amd -cclock 1130 -mclock 2030 -cvddc 875 -mvddc 875 -daglim 1
What can I do?
I also lost few MHs on my rig with Sapphire RX580
Dropped from 32.7MH/s to 31.9 MH/s
Mining ETH? your 4GB has not enough Vram to hold the DAG file.
You can mine ETH til 27. 12 with 4gb I think, I can still mine it but i lost some MH/s with them. Ofcoure you can mine it, you just need to increase VR ram.
It depends on driver, OS and so on. On most of my 4GB rigs, the RX 570 4GB only produce 24mh and raising the virtual ram change nothing. 4GB are not enough to hold the dag, your hashrate decrease with every new epoch dude (every 5 days)
Try to switch to another server. Try eu1
Thank you for reply.same result, i even switched to another pool. this happens after 20 hours straight mining. Then i must restart the rig. after 20 hours mining miner tries to connect Devfee and it gives this error then all troubles starts. i dont know it something to do with my rig or miner.
after restart the rig all ok Devfee connecting but after 20 hours same thing again.
show us your commandline please.
i have no issues mining 2 days with 5.3b
PhoenixMiner.exe -pool ssl://eu1-etc.ethermine.org:5555 -wal 0x17de26c0492fe296909dad7c979a8fa767de0252.RIG_4G -coin etc -gpus 2,5 -cclock 1150 -cvddc 900 -mclock 2000 -mvddc 920 -mt 1 -mi 11 -powlim -10 -amd -log 0 -rxboost 1 -gt 57
Can you try -pool eu1-etc.ethermine.org:4444
December 01, 2020, 05:30:35 AM
PhoenixMiner vs TeamRedMiner (48 Hours Mining Comparison) - https://www.youtube.com/watch?v=hamCWMCvQvU
December 01, 2020, 05:29:40 AM
Try to switch to another server. Try eu1
Thank you for reply.same result, i even switched to another pool. this happens after 20 hours straight mining. Then i must restart the rig. after 20 hours mining miner tries to connect Devfee and it gives this error then all troubles starts. i dont know it something to do with my rig or miner.
after restart the rig all ok Devfee connecting but after 20 hours same thing again.
show us your commandline please.
i have no issues mining 2 days with 5.3b
PhoenixMiner.exe -pool ssl://eu1-etc.ethermine.org:5555 -wal 0x17de26c0492fe296909dad7c979a8fa767de0252.RIG_4G -coin etc -gpus 2,5 -cclock 1150 -cvddc 900 -mclock 2000 -mvddc 920 -mt 1 -mi 11 -powlim -10 -amd -log 0 -rxboost 1 -gt 57
December 01, 2020, 05:22:26 AM
Try to switch to another server. Try eu1
Thank you for reply.same result, i even switched to another pool. this happens after 20 hours straight mining. Then i must restart the rig. after 20 hours mining miner tries to connect Devfee and it gives this error then all troubles starts. i dont know it something to do with my rig or miner.
after restart the rig all ok Devfee connecting but after 20 hours same thing again.
show us your commandline please.
i have no issues mining 2 days with 5.3b
My MH/s drop from 30.8 to 24 on my 4GB RX470.
My settings:
Bios: MOD
Drivers: Latest adrenalin
Miner: Phoenix 5.3B (before that I used 5.1C)
FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
-epsw x -mode 1 -Rmode 1 -log 0 -mport 0 -etha 0 -retrydelay 1 -ftime 10 -tt 75 -tstop 80 -tstart 60 -fanmin 10 -coin eth -amd -cclock 1130 -mclock 2030 -cvddc 875 -mvddc 875 -daglim 1
What can I do?
I also lost few MHs on my rig with Sapphire RX580
Dropped from 32.7MH/s to 31.9 MH/s
My settings:
Bios: MOD
Drivers: Latest adrenalin
Miner: Phoenix 5.3B (before that I used 5.1C)
FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
-epsw x -mode 1 -Rmode 1 -log 0 -mport 0 -etha 0 -retrydelay 1 -ftime 10 -tt 75 -tstop 80 -tstart 60 -fanmin 10 -coin eth -amd -cclock 1130 -mclock 2030 -cvddc 875 -mvddc 875 -daglim 1
What can I do?
I also lost few MHs on my rig with Sapphire RX580
Dropped from 32.7MH/s to 31.9 MH/s
Mining ETH? your 4GB has not enough Vram to hold the DAG file.
You can mine ETH til 27. 12 with 4gb I think, I can still mine it but i lost some MH/s with them. Ofcoure you can mine it, you just need to increase VR ram.
December 01, 2020, 04:56:41 AM
Try to switch to another server. Try eu1
Thank you for reply.same result, i even switched to another pool. this happens after 20 hours straight mining. Then i must restart the rig. after 20 hours mining miner tries to connect Devfee and it gives this error then all troubles starts. i dont know it something to do with my rig or miner.
after restart the rig all ok Devfee connecting but after 20 hours same thing again.
show us your commandline please.
i have no issues mining 2 days with 5.3b
My MH/s drop from 30.8 to 24 on my 4GB RX470.
My settings:
Bios: MOD
Drivers: Latest adrenalin
Miner: Phoenix 5.3B (before that I used 5.1C)
FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
-epsw x -mode 1 -Rmode 1 -log 0 -mport 0 -etha 0 -retrydelay 1 -ftime 10 -tt 75 -tstop 80 -tstart 60 -fanmin 10 -coin eth -amd -cclock 1130 -mclock 2030 -cvddc 875 -mvddc 875 -daglim 1
What can I do?
I also lost few MHs on my rig with Sapphire RX580
Dropped from 32.7MH/s to 31.9 MH/s
My settings:
Bios: MOD
Drivers: Latest adrenalin
Miner: Phoenix 5.3B (before that I used 5.1C)
FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
-epsw x -mode 1 -Rmode 1 -log 0 -mport 0 -etha 0 -retrydelay 1 -ftime 10 -tt 75 -tstop 80 -tstart 60 -fanmin 10 -coin eth -amd -cclock 1130 -mclock 2030 -cvddc 875 -mvddc 875 -daglim 1
What can I do?
I also lost few MHs on my rig with Sapphire RX580
Dropped from 32.7MH/s to 31.9 MH/s
Mining ETH? your 4GB has not enough Vram to hold the DAG file.
December 01, 2020, 04:21:03 AM
My MH/s drop from 30.8 to 24 on my 4GB RX470.
My settings:
Bios: MOD
Drivers: Latest adrenalin
Miner: Phoenix 5.3B (before that I used 5.1C)
FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
-epsw x -mode 1 -Rmode 1 -log 0 -mport 0 -etha 0 -retrydelay 1 -ftime 10 -tt 75 -tstop 80 -tstart 60 -fanmin 10 -coin eth -amd -cclock 1130 -mclock 2030 -cvddc 875 -mvddc 875 -daglim 1
What can I do?
I also lost few MHs on my rig with Sapphire RX580
Dropped from 32.7MH/s to 31.9 MH/s
My settings:
Bios: MOD
Drivers: Latest adrenalin
Miner: Phoenix 5.3B (before that I used 5.1C)
FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
-epsw x -mode 1 -Rmode 1 -log 0 -mport 0 -etha 0 -retrydelay 1 -ftime 10 -tt 75 -tstop 80 -tstart 60 -fanmin 10 -coin eth -amd -cclock 1130 -mclock 2030 -cvddc 875 -mvddc 875 -daglim 1
What can I do?
I also lost few MHs on my rig with Sapphire RX580
Dropped from 32.7MH/s to 31.9 MH/s
December 01, 2020, 03:34:54 AM
Try to switch to another server. Try eu1
Thank you for reply.same result, i even switched to another pool. this happens after 20 hours straight mining. Then i must restart the rig. after 20 hours mining miner tries to connect Devfee and it gives this error then all troubles starts. i dont know it something to do with my rig or miner.
after restart the rig all ok Devfee connecting but after 20 hours same thing again.
December 01, 2020, 03:30:27 AM
Try to switch to another server. Try eu1
December 01, 2020, 02:08:41 AM
come on guys. Anyone? i helped to many people but when i ask no one? i will pay some ETC.
Devfee : Could not connect to ethash pool us1-etc.ethermine.org:4444: An operation on a socket could not be performed because system lacked sufficient buffer space or because queue was full.
Devfee : Could not connect to ethash pool us1-etc.ethermine.org:4444: An operation on a socket could not be performed because system lacked sufficient buffer space or because queue was full.
December 01, 2020, 02:08:16 AM
come on guys. Anyone? i helped to many people but when i ask no one? i will pay some ETC.
Devfee : Could not connect to ethash pool us1-etc.ethermine.org:4444: An operation on a socket could not be performed because system lacked sufficient buffer space or because queue was full.
Devfee : Could not connect to ethash pool us1-etc.ethermine.org:4444: An operation on a socket could not be performed because system lacked sufficient buffer space or because queue was full.
November 30, 2020, 07:05:36 PM
Phoenix,
Just an update on this issue: v5.3b seems to be moving in the right direction - all of my GPUs mine, now, but they each see about 18MH less hashrate on v5.3b versus what I still get on v5.0e. Again, with this version, downgrading to v5.0e resolves the issue without rebooting. If it's helpful, the starting hashrate for v5.3b during autotuning is only about half of what it is in v5.0e. I hope this helps.
Just an update on this issue: v5.3b seems to be moving in the right direction - all of my GPUs mine, now, but they each see about 18MH less hashrate on v5.3b versus what I still get on v5.0e. Again, with this version, downgrading to v5.0e resolves the issue without rebooting. If it's helpful, the starting hashrate for v5.3b during autotuning is only about half of what it is in v5.0e. I hope this helps.
I wanted to report an issue I ran into on v5.2e for mixed-gen ETH mining on one XFX RX 5700 8GB + one XFX RX 480 8GB + one MSI RX 480 8GB on Ubuntu 18.04.4 LTS (via minerstatOS) with amdgpu-pro v19.30 drivers. When I upgraded to v5.2e, I saw my RX 5700 take approximately an hour to build its DAG file, and then yield 0 hashrate, and the two RX 480s only produced about a third of their normal hashrate. I previously saw the same behavior with all PhoenixMiner v5.1x versions, as well.
Rolling back to v5.0e immediately resolves the issue without a reboot. I have used a few versions of the PhoenixMiner for about ten months on this mixed-gen rig without issue, so this has been something introduced after v5.0e. In case it's any help, I am including a few log excerpts, though I never saw any suspicious messages or error logs to report.
v5.2e log (note the miner uptime versus the DAG generation progress)
v5.0e log (note the functional GPU1 and the much better hashrates for SPU2 and GPU3)
Rolling back to v5.0e immediately resolves the issue without a reboot. I have used a few versions of the PhoenixMiner for about ten months on this mixed-gen rig without issue, so this has been something introduced after v5.0e. In case it's any help, I am including a few log excerpts, though I never saw any suspicious messages or error logs to report.
v5.2e log (note the miner uptime versus the DAG generation progress)
Code:
2020.11.23:16:24:05.279: eths Eth: New job #f7c9706f from us1.ethermine.org:4444; diff: 4000MH
2020.11.23:16:24:05.536: GPU1 GPU1: DAG 92%
2020.11.23:16:24:05.866: main
2020.11.23:16:24:05.866: main *** 0:43 *** 11/23 16:24 **************************************
2020.11.23:16:24:05.866: main Eth: Mining ETH on us1.ethermine.org:4444 for 0:43
2020.11.23:16:24:05.866: main Eth speed: 22.623 MH/s, shares: 17/0/0, time: 0:43
2020.11.23:16:24:05.866: main GPUs: 1: 0.000 MH/s (0) 2: 11.801 MH/s (11) 3: 10.822 MH/s (6)
2020.11.23:16:24:05.866: main Eth: Accepted shares 17 (0 stales), rejected shares 0 (0 stales)
2020.11.23:16:24:05.866: main Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
2020.11.23:16:24:05.866: main Eth: Maximum difficulty of found share: 56.2 GH (!)
2020.11.23:16:24:05.866: main Eth: Average speed (5 min): 22.595 MH/s
2020.11.23:16:24:05.866: main Eth: Effective speed: 25.98 MH/s; at pool: 25.98 MH/s
2020.11.23:16:24:05.866: main
...
2020.11.23:16:27:02.493: eths Eth: New job #c61bb84f from us1.ethermine.org:4444; diff: 4000MH
2020.11.23:16:27:02.888: GPU1 GPU1: DAG 98%
2020.11.23:16:27:04.976: main GPU1: 45C 91% 53W, GPU2: 60C 100% 76W, GPU3: 50C 100% 70W
GPUs power: 199.2 W
2020.11.23:16:27:06.380: main
2020.11.23:16:27:06.380: main *** 0:46 *** 11/23 16:27 **************************************
2020.11.23:16:27:06.381: main Eth: Mining ETH on us1.ethermine.org:4444 for 0:46
2020.11.23:16:27:06.381: main Eth speed: 22.623 MH/s, shares: 18/0/0, time: 0:46
2020.11.23:16:27:06.381: main GPUs: 1: 0.000 MH/s (0) 2: 11.802 MH/s (11) 3: 10.821 MH/s (7)
2020.11.23:16:27:06.381: main Eth: Accepted shares 18 (0 stales), rejected shares 0 (0 stales)
2020.11.23:16:27:06.381: main Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
2020.11.23:16:27:06.381: main Eth: Maximum difficulty of found share: 56.2 GH (!)
2020.11.23:16:27:06.381: main Eth: Average speed (5 min): 22.618 MH/s
2020.11.23:16:27:06.381: main Eth: Effective speed: 25.73 MH/s; at pool: 25.73 MH/s
2020.11.23:16:27:06.381: main
...
2020.11.23:16:27:48.656: eths Eth: Received: {"id":6,"jsonrpc":"2.0","result":true}
2020.11.23:16:27:51.512: main
2020.11.23:16:27:51.512: main *** 0:47 *** 11/23 16:27 **************************************
2020.11.23:16:27:51.513: main Eth: Mining ETH on us1.ethermine.org:4444 for 0:47
2020.11.23:16:27:51.513: main Eth speed: 22.624 MH/s, shares: 19/0/0, time: 0:47
2020.11.23:16:27:51.513: main GPUs: 1: 0.000 MH/s (0) 2: 11.801 MH/s (12) 3: 10.823 MH/s (7)
2020.11.23:16:27:51.513: main Eth: Accepted shares 19 (0 stales), rejected shares 0 (0 stales)
2020.11.23:16:27:51.513: main Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
2020.11.23:16:27:51.513: main Eth: Maximum difficulty of found share: 56.2 GH (!)
2020.11.23:16:27:51.513: main Eth: Average speed (5 min): 22.608 MH/s
2020.11.23:16:27:51.513: main Eth: Effective speed: 26.73 MH/s; at pool: 26.73 MH/s
2020.11.23:16:27:51.513: main
2020.11.23:16:27:52.592: eths Eth: New job #aaa008e3 from us1.ethermine.org:4444; diff: 4000MH
2020.11.23:16:27:53.583: GPU1 GPU1: DAG 100%
2020.11.23:16:27:53.672: GPU1 GPU1: DAG generated in 2841.7 s (1.4 MB/s)
2020.11.23:16:27:53.673: GPU1 GPU1: Using Ethash OCL kernels (gfx1010; -clkernel 1)
2020.11.23:16:27:53.673: GPU1 GPU1: no -gt value specified, switching to auto-tune
2020.11.23:16:27:53.673: GPU1 GPU1: starting auto-tune process
2020.11.23:16:24:05.536: GPU1 GPU1: DAG 92%
2020.11.23:16:24:05.866: main
2020.11.23:16:24:05.866: main *** 0:43 *** 11/23 16:24 **************************************
2020.11.23:16:24:05.866: main Eth: Mining ETH on us1.ethermine.org:4444 for 0:43
2020.11.23:16:24:05.866: main Eth speed: 22.623 MH/s, shares: 17/0/0, time: 0:43
2020.11.23:16:24:05.866: main GPUs: 1: 0.000 MH/s (0) 2: 11.801 MH/s (11) 3: 10.822 MH/s (6)
2020.11.23:16:24:05.866: main Eth: Accepted shares 17 (0 stales), rejected shares 0 (0 stales)
2020.11.23:16:24:05.866: main Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
2020.11.23:16:24:05.866: main Eth: Maximum difficulty of found share: 56.2 GH (!)
2020.11.23:16:24:05.866: main Eth: Average speed (5 min): 22.595 MH/s
2020.11.23:16:24:05.866: main Eth: Effective speed: 25.98 MH/s; at pool: 25.98 MH/s
2020.11.23:16:24:05.866: main
...
2020.11.23:16:27:02.493: eths Eth: New job #c61bb84f from us1.ethermine.org:4444; diff: 4000MH
2020.11.23:16:27:02.888: GPU1 GPU1: DAG 98%
2020.11.23:16:27:04.976: main GPU1: 45C 91% 53W, GPU2: 60C 100% 76W, GPU3: 50C 100% 70W
GPUs power: 199.2 W
2020.11.23:16:27:06.380: main
2020.11.23:16:27:06.380: main *** 0:46 *** 11/23 16:27 **************************************
2020.11.23:16:27:06.381: main Eth: Mining ETH on us1.ethermine.org:4444 for 0:46
2020.11.23:16:27:06.381: main Eth speed: 22.623 MH/s, shares: 18/0/0, time: 0:46
2020.11.23:16:27:06.381: main GPUs: 1: 0.000 MH/s (0) 2: 11.802 MH/s (11) 3: 10.821 MH/s (7)
2020.11.23:16:27:06.381: main Eth: Accepted shares 18 (0 stales), rejected shares 0 (0 stales)
2020.11.23:16:27:06.381: main Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
2020.11.23:16:27:06.381: main Eth: Maximum difficulty of found share: 56.2 GH (!)
2020.11.23:16:27:06.381: main Eth: Average speed (5 min): 22.618 MH/s
2020.11.23:16:27:06.381: main Eth: Effective speed: 25.73 MH/s; at pool: 25.73 MH/s
2020.11.23:16:27:06.381: main
...
2020.11.23:16:27:48.656: eths Eth: Received: {"id":6,"jsonrpc":"2.0","result":true}
2020.11.23:16:27:51.512: main
2020.11.23:16:27:51.512: main *** 0:47 *** 11/23 16:27 **************************************
2020.11.23:16:27:51.513: main Eth: Mining ETH on us1.ethermine.org:4444 for 0:47
2020.11.23:16:27:51.513: main Eth speed: 22.624 MH/s, shares: 19/0/0, time: 0:47
2020.11.23:16:27:51.513: main GPUs: 1: 0.000 MH/s (0) 2: 11.801 MH/s (12) 3: 10.823 MH/s (7)
2020.11.23:16:27:51.513: main Eth: Accepted shares 19 (0 stales), rejected shares 0 (0 stales)
2020.11.23:16:27:51.513: main Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
2020.11.23:16:27:51.513: main Eth: Maximum difficulty of found share: 56.2 GH (!)
2020.11.23:16:27:51.513: main Eth: Average speed (5 min): 22.608 MH/s
2020.11.23:16:27:51.513: main Eth: Effective speed: 26.73 MH/s; at pool: 26.73 MH/s
2020.11.23:16:27:51.513: main
2020.11.23:16:27:52.592: eths Eth: New job #aaa008e3 from us1.ethermine.org:4444; diff: 4000MH
2020.11.23:16:27:53.583: GPU1 GPU1: DAG 100%
2020.11.23:16:27:53.672: GPU1 GPU1: DAG generated in 2841.7 s (1.4 MB/s)
2020.11.23:16:27:53.673: GPU1 GPU1: Using Ethash OCL kernels (gfx1010; -clkernel 1)
2020.11.23:16:27:53.673: GPU1 GPU1: no -gt value specified, switching to auto-tune
2020.11.23:16:27:53.673: GPU1 GPU1: starting auto-tune process
v5.0e log (note the functional GPU1 and the much better hashrates for SPU2 and GPU3)
Code:
Eth: New job #169100e2 from us1.ethermine.org:4444; diff: 4000MH
Eth speed: 117.353 MH/s, shares: 5/0/0, time: 0:04
GPUs: 1: 57.140 MH/s (2) 2: 30.881 MH/s (2) 3: 29.332 MH/s (1)
GPU1: 57C 89% 130W, GPU2: 71C 100% 87W, GPU3: 61C 100% 86W
GPUs power: 303.0 W
Eth speed: 117.353 MH/s, shares: 5/0/0, time: 0:04
GPUs: 1: 57.140 MH/s (2) 2: 30.881 MH/s (2) 3: 29.332 MH/s (1)
GPU1: 57C 89% 130W, GPU2: 71C 100% 87W, GPU3: 61C 100% 86W
GPUs power: 303.0 W
November 30, 2020, 05:56:16 PM
I could use some guidance please.
I downloaded the new PM 5.3b to mine ETC again with some of my AMD 470 4gb cards. I have a test rig up with Win10 and 20.4.2 drivers installed. I have two cards that are the same except one is 8Gb and the other 4Gb. The 8gb card works fine of course, however, the 4Gb card only finds invalid shares.
https://imgur.com/jZELw2P
Not sure if my image will show up or not but I tried to embed an image.
Any ideas why the 4Gb card only finds invalid shares? I even dropped the mem clocks on the 4Gb card and added more power to see if that would help and it did not. I am about to install SMOS to see if that helps, but would really like to run Win10 if possible.
Just installed PM with SMOS and it is doing the same thing.
I downloaded the new PM 5.3b to mine ETC again with some of my AMD 470 4gb cards. I have a test rig up with Win10 and 20.4.2 drivers installed. I have two cards that are the same except one is 8Gb and the other 4Gb. The 8gb card works fine of course, however, the 4Gb card only finds invalid shares.
https://imgur.com/jZELw2P
Not sure if my image will show up or not but I tried to embed an image.
Any ideas why the 4Gb card only finds invalid shares? I even dropped the mem clocks on the 4Gb card and added more power to see if that would help and it did not. I am about to install SMOS to see if that helps, but would really like to run Win10 if possible.
Just installed PM with SMOS and it is doing the same thing.
November 30, 2020, 05:41:25 PM
After a few hours mining my second GPU stops mining and I see 0.000 MH/s with the statement "wdog GPU2 not responding" and "wdog Thread(s) not responding. Restarting."
But nothing happens.
I am not sure how to resolve this issue so I am looking for ideas here.
Below are the details of my set up.
RX 580 Saphire Nitro - stock bios
Driver: Adrenalin 2020 20.9.1
Miner: Phoenix 5.3b
cclock: 1170
mclock: 2170
cvddc: 850
mvddc: 850
Fan: 35
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
"C:\Users\Arthur\Desktop\Ethereum\Phoenix ""Miner\PhoenixMiner.exe" -amd -daglim 1 -dagrestart 1 -eres 0 -rvram 0 -rxboost 1 -pool eth-us-east1.nanopool.org:9999 -pool2 eth-us-west1.nanopool.org:9999 -wal 0x....../[email protected] -pass x -proto 2 -gt 43,77 -cclock 1200,1170 -mclock 2200,2170 -cvddc 850 -mvddc 850 -astats 1
Any idea or assistance is appreciated.
thanks
But nothing happens.
I am not sure how to resolve this issue so I am looking for ideas here.
Below are the details of my set up.
RX 580 Saphire Nitro - stock bios
Driver: Adrenalin 2020 20.9.1
Miner: Phoenix 5.3b
cclock: 1170
mclock: 2170
cvddc: 850
mvddc: 850
Fan: 35
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
"C:\Users\Arthur\Desktop\Ethereum\Phoenix ""Miner\PhoenixMiner.exe" -amd -daglim 1 -dagrestart 1 -eres 0 -rvram 0 -rxboost 1 -pool eth-us-east1.nanopool.org:9999 -pool2 eth-us-west1.nanopool.org:9999 -wal 0x....../[email protected] -pass x -proto 2 -gt 43,77 -cclock 1200,1170 -mclock 2200,2170 -cvddc 850 -mvddc 850 -astats 1
Any idea or assistance is appreciated.
thanks
Hi , i got the same card...
RX 580 Saphire Nitro - try MOD BIOS
Driver: Adrenalin 2020 20.9.1 = ok
Miner: Phoenix 5.3b = ok
cclock: 1170 = 1150
mclock: 2170 = 2100
cvddc: 850 = 875
mvddc: 850 = 875
Fan: 35
That could give you 30MH
https://i.imgur.com/zlk1B6T.jpg
Thank you for posting your numbers, this helps me tune the card.
November 30, 2020, 04:57:05 PM
hi i am new to ethereum mining and to PhoenixMiner can anyone explain why my 1060 6gb is only running at a reported 15.6MH/s when this chart https://www.kryptex.org/en/best-gpus-for-mining says it runs at 22MH/s? My GPU utilization is at 100% am I doing something wrong? I didnt see that the latest drivers from nvidia were bad.
Did you to go down on core and up on memory?
On linux i use -400/+600...for windows double those. I get 23-24mhs per card limit to 80watts max.
no idea. I just started it after putting the info into the bin file under start_miner. Also I wasnt sure if this thread was active my b. I cant delete my topics as well weird. I run windows 10 with a stock settings on my 1060 does it make a huge difference with overclocking and undervolting? Are you refering to the in app GPU tuning parameter in PhoenixMiner?
afterburner is software that should let you adjust your core / memory / power level
https://www.msi.com/page/Afterburner
thank you. on my pool's website it says the reported hashrate has stopped at 0 what do i do?
If the miner is showing 0 then you may have to try higher core and lower memory oc settings. move core up and memory down 50 - 100 at a time until it stays mining. Watch the temp on your card. Max safe for nvidia is 80c...i prefer to be 60c.
thats the thing, I didnt overclock my card at all at the effective hasrate went close to zero and the reported stayed at zero for several hours. the pool website was still active but my miner software reported a hasrate of 15 consistently so it was mining but not reporting it what could happen?
November 30, 2020, 01:07:50 PM
I same card
RX 580 Saphire Nitro - MOD BIOS
Driver: Adrenalin 2019.5.2
Miner: Phoenix 5.3b
cclock: 1250
mclock: 2250
cvddc: 850
mvddc: 880
Fan: 30%
temp 55
power 84w
And ETH 33,7MH
RX 580 Saphire Nitro - MOD BIOS
Driver: Adrenalin 2019.5.2
Miner: Phoenix 5.3b
cclock: 1250
mclock: 2250
cvddc: 850
mvddc: 880
Fan: 30%
temp 55
power 84w
And ETH 33,7MH
November 30, 2020, 11:59:10 AM
After a few hours mining my second GPU stops mining and I see 0.000 MH/s with the statement "wdog GPU2 not responding" and "wdog Thread(s) not responding. Restarting."
But nothing happens.
I am not sure how to resolve this issue so I am looking for ideas here.
Below are the details of my set up.
RX 580 Saphire Nitro - stock bios
Driver: Adrenalin 2020 20.9.1
Miner: Phoenix 5.3b
cclock: 1170
mclock: 2170
cvddc: 850
mvddc: 850
Fan: 35
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
"C:\Users\Arthur\Desktop\Ethereum\Phoenix ""Miner\PhoenixMiner.exe" -amd -daglim 1 -dagrestart 1 -eres 0 -rvram 0 -rxboost 1 -pool eth-us-east1.nanopool.org:9999 -pool2 eth-us-west1.nanopool.org:9999 -wal 0x....../[email protected] -pass x -proto 2 -gt 43,77 -cclock 1200,1170 -mclock 2200,2170 -cvddc 850 -mvddc 850 -astats 1
Any idea or assistance is appreciated.
thanks
But nothing happens.
I am not sure how to resolve this issue so I am looking for ideas here.
Below are the details of my set up.
RX 580 Saphire Nitro - stock bios
Driver: Adrenalin 2020 20.9.1
Miner: Phoenix 5.3b
cclock: 1170
mclock: 2170
cvddc: 850
mvddc: 850
Fan: 35
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
"C:\Users\Arthur\Desktop\Ethereum\Phoenix ""Miner\PhoenixMiner.exe" -amd -daglim 1 -dagrestart 1 -eres 0 -rvram 0 -rxboost 1 -pool eth-us-east1.nanopool.org:9999 -pool2 eth-us-west1.nanopool.org:9999 -wal 0x....../[email protected] -pass x -proto 2 -gt 43,77 -cclock 1200,1170 -mclock 2200,2170 -cvddc 850 -mvddc 850 -astats 1
Any idea or assistance is appreciated.
thanks
Hi , i got the same card...
RX 580 Saphire Nitro - try MOD BIOS
Driver: Adrenalin 2020 20.9.1 = ok
Miner: Phoenix 5.3b = ok
cclock: 1170 = 1150
mclock: 2170 = 2100
cvddc: 850 = 875
mvddc: 850 = 875
Fan: 35
That could give you 30MH
https://i.imgur.com/zlk1B6T.jpg
November 30, 2020, 11:54:37 AM
how can i set worker name? -worker didn´t work on EtcHash and wallet.worker also didn´t work.
November 30, 2020, 09:13:35 AM
After a few hours mining my second GPU stops mining and I see 0.000 MH/s with the statement "wdog GPU2 not responding" and "wdog Thread(s) not responding. Restarting."
But nothing happens.
I am not sure how to resolve this issue so I am looking for ideas here.
Below are the details of my set up.
RX 580 Saphire Nitro - stock bios
Driver: Adrenalin 2020 20.9.1
Miner: Phoenix 5.3b
cclock: 1170
mclock: 2170
cvddc: 850
mvddc: 850
Fan: 35
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
"C:\Users\Arthur\Desktop\Ethereum\Phoenix ""Miner\PhoenixMiner.exe" -amd -daglim 1 -dagrestart 1 -eres 0 -rvram 0 -rxboost 1 -pool eth-us-east1.nanopool.org:9999 -pool2 eth-us-west1.nanopool.org:9999 -wal 0x....../[email protected] -pass x -proto 2 -gt 43,77 -cclock 1200,1170 -mclock 2200,2170 -cvddc 850 -mvddc 850 -astats 1
Any idea or assistance is appreciated.
thanks
Sounds like you got too much OC. Get low memory or increase voltage. But nothing happens.
I am not sure how to resolve this issue so I am looking for ideas here.
Below are the details of my set up.
RX 580 Saphire Nitro - stock bios
Driver: Adrenalin 2020 20.9.1
Miner: Phoenix 5.3b
cclock: 1170
mclock: 2170
cvddc: 850
mvddc: 850
Fan: 35
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
"C:\Users\Arthur\Desktop\Ethereum\Phoenix ""Miner\PhoenixMiner.exe" -amd -daglim 1 -dagrestart 1 -eres 0 -rvram 0 -rxboost 1 -pool eth-us-east1.nanopool.org:9999 -pool2 eth-us-west1.nanopool.org:9999 -wal 0x....../[email protected] -pass x -proto 2 -gt 43,77 -cclock 1200,1170 -mclock 2200,2170 -cvddc 850 -mvddc 850 -astats 1
Any idea or assistance is appreciated.
thanks
Jump to: