(1) rx 570 4 gb 25mhs
(3) rx 580 4 gb 28mhs per card
Drivers AMD 20.4.2
Windows 10
Thank u
Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 208. (Read 784965 times)
November 18, 2020, 05:20:53 PM
Working great on
(1) rx 570 4 gb 25mhs
(3) rx 580 4 gb 28mhs per card
Drivers AMD 20.4.2
Windows 10
Thank u
(1) rx 570 4 gb 25mhs
(3) rx 580 4 gb 28mhs per card
Drivers AMD 20.4.2
Windows 10
Thank u
November 18, 2020, 03:16:24 PM
@PhoenixMiner, AMD released 20.11.2 driver. PM 5.2c didn't support it. It's need update.
November 18, 2020, 02:30:32 PM
Hy people!
I have a problem running more than 9 RX580 at my ashrock H110. It run with 12 cards till december 19, than I stopped mining. Now I startet again, but get always error in claymore and with phoenix is the same. The mainboard found more than 9 cards, but get errors when I try to run more than 9 cards. I have old blockchain drivers for the amd rx580 cards. So, do you think after upgrading will it be posible to run more than 9 cards, or will it be the same?
I did not upgrade now, because I don´t know if the system runs stable after upgrading? Last update was maybe 2018, after installing the system.
I have two riggs with the same components - both are running only 9 cards, more than 9 - error.
thank you for your replay
Anon
I have a problem running more than 9 RX580 at my ashrock H110. It run with 12 cards till december 19, than I stopped mining. Now I startet again, but get always error in claymore and with phoenix is the same. The mainboard found more than 9 cards, but get errors when I try to run more than 9 cards. I have old blockchain drivers for the amd rx580 cards. So, do you think after upgrading will it be posible to run more than 9 cards, or will it be the same?
I did not upgrade now, because I don´t know if the system runs stable after upgrading? Last update was maybe 2018, after installing the system.
I have two riggs with the same components - both are running only 9 cards, more than 9 - error.
thank you for your replay
Anon
use 20.4.2 drivers, it works fine with 10 gpu rigs
Hi!
Thx for the answer! I did upgrade to this driver 20.4.2, but it is the same. The miner crashes, error something in phoenix. At Claymore error at gpu x, gpu y...
The system finds 12 gpu´s, but not posible to mine more than 9 gpu´s.
I can mix the 9 gpu´s at all 12 slots with also mixing the risers to know if the gpu´s are ok, the risers are ok and the gpu-slots at the mainboard are ok, no idea at the moment....
I tryed also with a brand new ashrock h110 btc plus, with also the driver 20.4.2, but phonix and claymore are not willing to mine...
Maybe motherboard bios update??
thank you
Anon
https://www.youtube.com/watch?v=N_9-3zVsgDg
It is possible to mine even with 19 gpus under Windows. Just make sure you're running latest Win10 version as well as recommended drivers.
November 18, 2020, 02:26:08 PM
Hy people!
I have a problem running more than 9 RX580 at my ashrock H110. It run with 12 cards till december 19, than I stopped mining. Now I startet again, but get always error in claymore and with phoenix is the same. The mainboard found more than 9 cards, but get errors when I try to run more than 9 cards. I have old blockchain drivers for the amd rx580 cards. So, do you think after upgrading will it be posible to run more than 9 cards, or will it be the same?
I did not upgrade now, because I don´t know if the system runs stable after upgrading? Last update was maybe 2018, after installing the system.
I have two riggs with the same components - both are running only 9 cards, more than 9 - error.
thank you for your replay
Anon
I have a problem running more than 9 RX580 at my ashrock H110. It run with 12 cards till december 19, than I stopped mining. Now I startet again, but get always error in claymore and with phoenix is the same. The mainboard found more than 9 cards, but get errors when I try to run more than 9 cards. I have old blockchain drivers for the amd rx580 cards. So, do you think after upgrading will it be posible to run more than 9 cards, or will it be the same?
I did not upgrade now, because I don´t know if the system runs stable after upgrading? Last update was maybe 2018, after installing the system.
I have two riggs with the same components - both are running only 9 cards, more than 9 - error.
thank you for your replay
Anon
use 20.4.2 drivers, it works fine with 10 gpu rigs
Hi!
Thx for the answer! I did upgrade to this driver 20.4.2, but it is the same. The miner crashes, error something in phoenix. At Claymore error at gpu x, gpu y...
The system finds 12 gpu´s, but not posible to mine more than 9 gpu´s.
I can mix the 9 gpu´s at all 12 slots with also mixing the risers to know if the gpu´s are ok, the risers are ok and the gpu-slots at the mainboard are ok, no idea at the moment....
I tryed also with a brand new ashrock h110 btc plus, with also the driver 20.4.2, but phonix and claymore are not willing to mine...
Maybe motherboard bios update??
thank you
Anon
November 18, 2020, 02:05:57 PM
same here
179MH become 167MH
try set -daglim 4076, i have 474/574 cards, PM 5.2d, win10 1703, drivers 19.6.2, if -daglim 1 (auto, 4023) hashrate about 167MH/s, if set -daglim 4031-4076 hashrate is normal 180Mh, as before 179MH become 167MH
November 18, 2020, 01:24:09 PM
November 18, 2020, 11:37:27 AM
I also have a loss of 6% hash rate
If you have 4gb cards it is normal to lose 6% on every new epoch.
If you have 8gb cards then check if this 6% drop happens at the pool's side too. PM could have a bug in showing the stats properly.
If the drop exists at the pool's side with 8gb cards then updating your drivers to the newest supported by PM is very likely to fix your problem.
November 18, 2020, 11:19:58 AM
6,5 % less exactly here
dammit... hope to mine ETC soon at full speed
November 18, 2020, 11:05:24 AM
6,5 % less exactly here
November 18, 2020, 09:46:53 AM
same here
179MH become 167MH
179MH become 167MH
November 18, 2020, 09:40:48 AM
I also have a loss of 6% hash rate
November 18, 2020, 08:06:52 AM
RX 580 4GB - 20.4.2 drivers - Win 10 (1709)
@epoch 375 - PM 5.2c 31.7 MH/s (stable)
@epoch 376 - PM 5.2c 28.8 MH/s (stable)
@epoch 376 - PM 5.2d 29.8 MH/s (in testing)
I'm still using PM 5.1c for 8GB cards, stable so far.
Thanks PM
@epoch 375 - PM 5.2c 31.7 MH/s (stable)
@epoch 376 - PM 5.2c 28.8 MH/s (stable)
@epoch 376 - PM 5.2d 29.8 MH/s (in testing)
I'm still using PM 5.1c for 8GB cards, stable so far.
Thanks PM
I agree. Much better 5.1c for my AMD 6GB and 8GB cards.
November 18, 2020, 07:46:02 AM
PM 5.2 stopped working, 5.1c works. I will not change the Betta driver with them, my cards consume less.
November 18, 2020, 07:18:59 AM
RX 580 4GB - 20.4.2 drivers - Win 10 (1709)
@epoch 375 - PM 5.2c 31.7 MH/s (stable)
@epoch 376 - PM 5.2c 28.8 MH/s (stable)
@epoch 376 - PM 5.2d 29.8 MH/s (in testing)
I'm still using PM 5.1c for 8GB cards, stable so far.
Thanks PM
@epoch 375 - PM 5.2c 31.7 MH/s (stable)
@epoch 376 - PM 5.2c 28.8 MH/s (stable)
@epoch 376 - PM 5.2d 29.8 MH/s (in testing)
I'm still using PM 5.1c for 8GB cards, stable so far.
Thanks PM
November 18, 2020, 07:10:09 AM
Quote
You are wrong, every Nvidia Pascal Card, reduce the hashrate with every new DAG epoche. It's the same bug as the AMD R9 290x and R9 390 in the past.
The reduction is not much, but it will happened, You see it, when you let your miner benchmark in epoch 0 and for example in epoch 300. Test it and you will see it dude;)
The reduction is not much, but it will happened, You see it, when you let your miner benchmark in epoch 0 and for example in epoch 300. Test it and you will see it dude;)
My 1070's can easily reach 30-32mhs around 2018, current speed is 25-27mhs with the same OC as before, needed to increase core speed + voltage + "-straps" to reach 29-30mhs again.
Same with 1060's, from 24mhs, went down to 21-22mhs with the same 2018 OC.
RX's Polaris are not affected.
here's my 1060 Palits that hold awesome +800 to +850 memory .... for the past 3+ years:)
and here it is on ZIL(and 1080tis below):
November 18, 2020, 06:04:38 AM
November 18, 2020, 05:41:41 AM
November 18, 2020, 04:41:40 AM
November 18, 2020, 04:38:33 AM
The -mvddc doesnt work
If i put 800, HWiNFO64 shows me 850, and if i put 820,830,... al time HWiNFO64 shows 850.
Any idea? Im using 5.2c with AMD driver ver 19.12.2 (rig of 5700 xt)
If i put 800, HWiNFO64 shows me 850, and if i put 820,830,... al time HWiNFO64 shows 850.
Any idea? Im using 5.2c with AMD driver ver 19.12.2 (rig of 5700 xt)
November 18, 2020, 04:23:11 AM
Jump to: