PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 205.

Pe_Da

jr. member

Activity: 58

Merit: 5

Quote from: Cryptomining2003 on November 21, 2020, 01:40:00 AM

Quote from: Pe_Da on November 20, 2020, 02:42:06 PM

I know, new card and driver but I got many invalid shares in connection with Nicehash on my new RX 6800.
At the moment no OC and anyone else optimizings active. Seems to be a problem with the many new DAG generation within the mining process.

Quote

2020.11.20:14:50:21.563: main Phoenix Miner 5.2c Windows/msvc - Release build
2020.11.20:14:50:21.563: main Cmd line: -pool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -wal 39d2gVnrTCRyUKxdWUiTtHjyiYjm5Z6nsA$0-Lvv+41KBzlKZvrdxo--nQA -proto 4 -amd -gpus 0 -wdog 0 -gbase 0 -mport 127.0.0.1:-4000
2020.11.20:14:50:21.995: main Unknown OpenCL driver version! Hashrate and stale shares may suffer
2020.11.20:14:50:21.995: main OpenCL platform: OpenCL 2.1 AMD-APP (3188.4)
2020.11.20:14:50:21.999: main Available GPUs for mining:
2020.11.20:14:50:21.999: main GPU0: AMD Radeon RX 6800 (pcie 43), OpenCL 2.0, 16 GB VRAM, 30 CUs
2020.11.20:14:50:22.000: main ADL library initialized
2020.11.20:14:50:22.469: main Eth: the pool list contains 1 pool (1 from command-line)
2020.11.20:14:50:22.469: main Eth: primary pool: daggerhashimoto.eu.nicehash.com:3353
2020.11.20:14:50:22.469: main Starting GPU mining
2020.11.20:14:50:22.469: main Matched GPU0 to ADL adapter index 0 (method 1)
2020.11.20:14:50:22.474: main GPU0: AMD driver 20.11.2
2020.11.20:14:50:22.474: main GPU0: Created ADL monitor for adapter 0; overdrive version: 8 ( Cool

2020.11.20:14:50:22.474: main GPU0: using AMD driver ver 20.11.2
2020.11.20:14:50:22.601: main Eth: Connecting to ethash pool daggerhashimoto.eu.nicehash.com:3353 (proto: Nicehash)

2020.11.20:15:06:10.307: main *** 0:15 *** 11/20 15:06 **************************************
2020.11.20:15:06:10.307: main Eth: Mining ETH on daggerhashimoto.eu.nicehash.com:3353 for 0:15
2020.11.20:15:06:10.307: main Eth: Accepted shares 29 (5 stales), rejected shares 1 (1 stales)
2020.11.20:15:06:10.307: main Eth: **Incorrect shares 4** (11.76%), est. stales percentage 20.76%
2020.11.20:15:06:10.307: main Eth: Maximum difficulty of found share: 85.8 GH (!)
2020.11.20:15:06:10.307: main Eth: Average speed (5 min): 58.397 MH/s
2020.11.20:15:06:10.307: main Eth: Effective speed: 62.83 MH/s; at pool: 59.99 MH/s

"Normal" ETC and ETH mining runs properly, but with very fluctuating (56-60Mhs) hashrate!

I would first update driver to a version that supports the 6000 series. 20.11 seems to be old isnt it?

, that is the newest driver from AMD.

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: q1398590q on November 21, 2020, 05:15:37 AM

In Windows 10 system, CPU and memory usage rate is very high, and memory usage rate has reached 4G, can this problem be solved?

It's problem in your system. For me Windows 10 x64 Pro 1909. No such problems.

q1398590q

newbie

Activity: 8

Merit: 0

In Windows 10 system, CPU and memory usage rate is very high, and memory usage rate has reached 4G, can this problem be solved?

Cryptomining2003

newbie

Activity: 64

Merit: 0

I made some tests:
Phoenix 5.2d consumes 3w per card as 5.1c out of the wall at same hashrate. software reported it´s also 3-4 watts.
TeamRedMiner needs 3 watts less out of the wall (software reported 5w) but still has lower hashrate....so we get the worst out of these 2 szenarios Sad

Ursul0

sr. member

Activity: 857

Merit: 262

Quote from: billssama on November 20, 2020, 05:57:23 AM

Quote from: Ursul0 on November 19, 2020, 12:32:29 PM

Quote from: Ursul0 on November 19, 2020, 03:27:40 AM

Quote from: andrew115200 on November 18, 2020, 02:05:57 PM

Quote from: cscheat on November 18, 2020, 09:46:53 AM

same here

179MH become 167MH

try set -daglim 4076, i have 474/574 cards, PM 5.2d, win10 1703, drivers 19.6.2, if -daglim 1 (auto, 4023) hashrate about 167MH/s, if set -daglim 4031-4076 hashrate is normal 180Mh, as before

yeah. not really sure what's up, but all my 4gb polarises (except last devices at 10+) now hashing as they were

so if it wasn't clear, phoenix 5.2d is able to allocate full dag(376) now on windows on 4GB. from what I see it's likely be good for the next epoch as well.
4058MB is the actual allocated size in hwinfo.

Hello, they look good, what overclock do you have on those rx570s, I couldn't get more than 30mh from them

the range depends on the gpus, sapphire are the best for amd.
I have all my gpus with individual ODNT profiles(and/or PPT for vegas) and also custom timings with amdmemtweak. for best core2mem you need to clock core at least 1166 and mem over 2066. because I run 12gpu rigs...remotely.. it's very hard to squeeze out all it may give, need to sacrifice some for the sake of stability. but these GPUs are perfectly capable of doing over 32 with rare exceptions (my average across 100+ was about 31.3 or so. also you can go back and see some numbers in the screens I posted. ohh... and better not run your polarises on anything above 880mv. at or just below 850 is the best

Ruvv

newbie

Activity: 5

Merit: 0

Quote from: Azures on November 20, 2020, 03:23:50 PM

Will Phoenix 5.2 work on ETC when they reach block 11700000 and reduce the dag size ?

Also interesting

ivomm

legendary

Activity: 1891

Merit: 3096

All good things to those who wait

I found the solution for my 390's under smos and hiveos: -clKernel 0 -clNew 0. Now all cards are working with 30+ Mh/s!!!

batsonxl

member

Activity: 1201

Merit: 26

Quote from: Cryptomining2003 on November 21, 2020, 01:40:00 AM

Quote from: Pe_Da on November 20, 2020, 02:42:06 PM

I know, new card and driver but I got many invalid shares in connection with Nicehash on my new RX 6800.
At the moment no OC and anyone else optimizings active. Seems to be a problem with the many new DAG generation within the mining process.

Quote

2020.11.20:14:50:21.563: main Phoenix Miner 5.2c Windows/msvc - Release build
2020.11.20:14:50:21.563: main Cmd line: -pool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -wal 39d2gVnrTCRyUKxdWUiTtHjyiYjm5Z6nsA$0-Lvv+41KBzlKZvrdxo--nQA -proto 4 -amd -gpus 0 -wdog 0 -gbase 0 -mport 127.0.0.1:-4000
2020.11.20:14:50:21.995: main Unknown OpenCL driver version! Hashrate and stale shares may suffer
2020.11.20:14:50:21.995: main OpenCL platform: OpenCL 2.1 AMD-APP (3188.4)
2020.11.20:14:50:21.999: main Available GPUs for mining:
2020.11.20:14:50:21.999: main GPU0: AMD Radeon RX 6800 (pcie 43), OpenCL 2.0, 16 GB VRAM, 30 CUs
2020.11.20:14:50:22.000: main ADL library initialized
2020.11.20:14:50:22.469: main Eth: the pool list contains 1 pool (1 from command-line)
2020.11.20:14:50:22.469: main Eth: primary pool: daggerhashimoto.eu.nicehash.com:3353
2020.11.20:14:50:22.469: main Starting GPU mining
2020.11.20:14:50:22.469: main Matched GPU0 to ADL adapter index 0 (method 1)
2020.11.20:14:50:22.474: main GPU0: AMD driver 20.11.2
2020.11.20:14:50:22.474: main GPU0: Created ADL monitor for adapter 0; overdrive version: 8 ( Cool

2020.11.20:14:50:22.474: main GPU0: using AMD driver ver 20.11.2
2020.11.20:14:50:22.601: main Eth: Connecting to ethash pool daggerhashimoto.eu.nicehash.com:3353 (proto: Nicehash)

2020.11.20:15:06:10.307: main *** 0:15 *** 11/20 15:06 **************************************
2020.11.20:15:06:10.307: main Eth: Mining ETH on daggerhashimoto.eu.nicehash.com:3353 for 0:15
2020.11.20:15:06:10.307: main Eth: Accepted shares 29 (5 stales), rejected shares 1 (1 stales)
2020.11.20:15:06:10.307: main Eth: **Incorrect shares 4** (11.76%), est. stales percentage 20.76%
2020.11.20:15:06:10.307: main Eth: Maximum difficulty of found share: 85.8 GH (!)
2020.11.20:15:06:10.307: main Eth: Average speed (5 min): 58.397 MH/s
2020.11.20:15:06:10.307: main Eth: Effective speed: 62.83 MH/s; at pool: 59.99 MH/s

"Normal" ETC and ETH mining runs properly, but with very fluctuating (56-60Mhs) hashrate!

I would first update driver to a version that supports the 6000 series. 20.11 seems to be old isnt it?

i would like share this problem. it is driver and poenix version dont match. i was using 5.1c with 20.4.2 with no problems. then 5.2d was good but after couple days i god invalid shares. i updated to 20.11.1 now it is good again.
5.1c wotks great with 20.4.2
and 5.2d works great with 20.11.1

Cryptomining2003

newbie

Activity: 64

Merit: 0

Quote from: Pe_Da on November 20, 2020, 02:42:06 PM

I know, new card and driver but I got many invalid shares in connection with Nicehash on my new RX 6800.
At the moment no OC and anyone else optimizings active. Seems to be a problem with the many new DAG generation within the mining process.

Quote

2020.11.20:14:50:21.563: main Phoenix Miner 5.2c Windows/msvc - Release build
2020.11.20:14:50:21.563: main Cmd line: -pool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -wal 39d2gVnrTCRyUKxdWUiTtHjyiYjm5Z6nsA$0-Lvv+41KBzlKZvrdxo--nQA -proto 4 -amd -gpus 0 -wdog 0 -gbase 0 -mport 127.0.0.1:-4000
2020.11.20:14:50:21.995: main Unknown OpenCL driver version! Hashrate and stale shares may suffer
2020.11.20:14:50:21.995: main OpenCL platform: OpenCL 2.1 AMD-APP (3188.4)
2020.11.20:14:50:21.999: main Available GPUs for mining:
2020.11.20:14:50:21.999: main GPU0: AMD Radeon RX 6800 (pcie 43), OpenCL 2.0, 16 GB VRAM, 30 CUs
2020.11.20:14:50:22.000: main ADL library initialized
2020.11.20:14:50:22.469: main Eth: the pool list contains 1 pool (1 from command-line)
2020.11.20:14:50:22.469: main Eth: primary pool: daggerhashimoto.eu.nicehash.com:3353
2020.11.20:14:50:22.469: main Starting GPU mining
2020.11.20:14:50:22.469: main Matched GPU0 to ADL adapter index 0 (method 1)
2020.11.20:14:50:22.474: main GPU0: AMD driver 20.11.2
2020.11.20:14:50:22.474: main GPU0: Created ADL monitor for adapter 0; overdrive version: 8 ( Cool

2020.11.20:14:50:22.474: main GPU0: using AMD driver ver 20.11.2
2020.11.20:14:50:22.601: main Eth: Connecting to ethash pool daggerhashimoto.eu.nicehash.com:3353 (proto: Nicehash)

2020.11.20:15:06:10.307: main *** 0:15 *** 11/20 15:06 **************************************
2020.11.20:15:06:10.307: main Eth: Mining ETH on daggerhashimoto.eu.nicehash.com:3353 for 0:15
2020.11.20:15:06:10.307: main Eth: Accepted shares 29 (5 stales), rejected shares 1 (1 stales)
2020.11.20:15:06:10.307: main Eth: **Incorrect shares 4** (11.76%), est. stales percentage 20.76%
2020.11.20:15:06:10.307: main Eth: Maximum difficulty of found share: 85.8 GH (!)
2020.11.20:15:06:10.307: main Eth: Average speed (5 min): 58.397 MH/s
2020.11.20:15:06:10.307: main Eth: Effective speed: 62.83 MH/s; at pool: 59.99 MH/s

"Normal" ETC and ETH mining runs properly, but with very fluctuating (56-60Mhs) hashrate!

I would first update driver to a version that supports the 6000 series. 20.11 seems to be old isnt it?

q1398590q

newbie

Activity: 8

Merit: 0

In Windows 10, the CPU usage is very high, can you solve it?

bluspirit

jr. member

Activity: 70

Merit: 3

add -config config.txt:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

PhoenixMiner.exe -pool eth-us-east1.nanopool.org:9999 -wal WALLETNUMBER.RIGNAME -pass x -config config.txt
pause

and move following part to config.txt:

Code:

-amd
-acm
-mode 1
-hstats 1
-cclock 1250
-mclock 2250
-cvddc 890
-mvddc 890
-log 0
-tstop 85
-tstart 55
-tt 65
#-fanmin 45
-fanmin 35,40,35,35,35,35,35
-fanmax 100
-cdm 0
-fcm 2
-gpus 1,2,3,4,5,6,7
-clKernel 1
-gser 5
-altinit
-rvram -1
-wdog 0
-rmode 0

You can also move -wallet -pass and -pool options to config.txt

Edit: You should still customize this config for your GPUs (number and model)

zydake

newbie

Activity: 7

Merit: 0

Quote from: ?? on ??

Quote from: zydake on November 20, 2020, 12:41:33 PM

Quote from: ?? on ??

Quote from: zydake on November 19, 2020, 09:17:05 PM

Quote from: zeef on November 19, 2020, 06:09:36 PM

Hi everyone

I am having issue with 5.2d

When I turn Phoenix Miner on, it says "Press any key to continue".

Once I press any key with my keyboard, the miner closes

Any idea?

Think is some error in config or bat file..

Any idea what?

Would you mind sharing your config and bat file infos? (delete you wallet number and name if you want)

Quote from: ?? on ??

Quote from: PhoenixMiner on November 19, 2020, 03:10:26 AM

Quote from: ?? on ??

Same version 5.2C and 5.2.D, cause concern with my RX580 8GB cards, I lose MH/S even with daglimit XXXX

I reverted to 5.1C is no longer a problem.

Can you tell us the driver version and what are you mining (ETH or ETC)? We can't detect any loss of hashrate on 8GB cards in our internal testing.

- Driver AMD 19.5.2
- Mining ETH on ethermine.org
- Cards rx580 nitro+ and rx580 nitro+ SE - vram 8Go

Code:

-amd
-acm
-mode 1
-hstats 1
-cclock 1250
-mclock 2250
-cvddc 890
-mvddc 890
-log 0
-tstop 85
-tstart 55
-tt 65
#-fanmin 45
-fanmin 35
-fanmax 100
-cdm 0
-fcm 2
-gpus 1
-clKernel 1
-gser 5
-altinit
-rvram -1
-wdog 0
-rmode 0

What do you advice me ?

Try my config !

I should copy and paste this on my miner note pad? (bat file)

Right under "pause"?

yes add your pool and run it !

This is what I did and it's not working. Same error

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

PhoenixMiner.exe -pool eth-us-east1.nanopool.org:9999 -wal WALLETNUMBER.RIGNAME -pass x
pause

-amd
-acm
-mode 1
-hstats 1
-cclock 1250
-mclock 2250
-cvddc 890
-mvddc 890
-log 0
-tstop 85
-tstart 55
-tt 65
#-fanmin 45
-fanmin 35,40,35,35,35,35,35
-fanmax 100
-cdm 0
-fcm 2
-gpus 1,2,3,4,5,6,7
-clKernel 1
-gser 5
-altinit
-rvram -1
-wdog 0
-rmode 0

Azures

newbie

Activity: 1

Merit: 0

Will Phoenix 5.2 work on ETC when they reach block 11700000 and reduce the dag size ?

Pe_Da

jr. member

Activity: 58

Merit: 5

I know, new card and driver but I got many invalid shares in connection with Nicehash on my new RX 6800.
At the moment no OC and anyone else optimizings active. Seems to be a problem with the many new DAG generation within the mining process.

Quote

2020.11.20:14:50:21.563: main Phoenix Miner 5.2c Windows/msvc - Release build
2020.11.20:14:50:21.563: main Cmd line: -pool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -wal 39d2gVnrTCRyUKxdWUiTtHjyiYjm5Z6nsA$0-Lvv+41KBzlKZvrdxo--nQA -proto 4 -amd -gpus 0 -wdog 0 -gbase 0 -mport 127.0.0.1:-4000
2020.11.20:14:50:21.995: main Unknown OpenCL driver version! Hashrate and stale shares may suffer
2020.11.20:14:50:21.995: main OpenCL platform: OpenCL 2.1 AMD-APP (3188.4)
2020.11.20:14:50:21.999: main Available GPUs for mining:
2020.11.20:14:50:21.999: main GPU0: AMD Radeon RX 6800 (pcie 43), OpenCL 2.0, 16 GB VRAM, 30 CUs
2020.11.20:14:50:22.000: main ADL library initialized
2020.11.20:14:50:22.469: main Eth: the pool list contains 1 pool (1 from command-line)
2020.11.20:14:50:22.469: main Eth: primary pool: daggerhashimoto.eu.nicehash.com:3353
2020.11.20:14:50:22.469: main Starting GPU mining
2020.11.20:14:50:22.469: main Matched GPU0 to ADL adapter index 0 (method 1)
2020.11.20:14:50:22.474: main GPU0: AMD driver 20.11.2
2020.11.20:14:50:22.474: main GPU0: Created ADL monitor for adapter 0; overdrive version: 8 ( Cool

2020.11.20:14:50:22.474: main GPU0: using AMD driver ver 20.11.2
2020.11.20:14:50:22.601: main Eth: Connecting to ethash pool daggerhashimoto.eu.nicehash.com:3353 (proto: Nicehash)

2020.11.20:15:06:10.307: main *** 0:15 *** 11/20 15:06 **************************************
2020.11.20:15:06:10.307: main Eth: Mining ETH on daggerhashimoto.eu.nicehash.com:3353 for 0:15
2020.11.20:15:06:10.307: main Eth: Accepted shares 29 (5 stales), rejected shares 1 (1 stales)
2020.11.20:15:06:10.307: main Eth: **Incorrect shares 4** (11.76%), est. stales percentage 20.76%
2020.11.20:15:06:10.307: main Eth: Maximum difficulty of found share: 85.8 GH (!)
2020.11.20:15:06:10.307: main Eth: Average speed (5 min): 58.397 MH/s
2020.11.20:15:06:10.307: main Eth: Effective speed: 62.83 MH/s; at pool: 59.99 MH/s

"Normal" ETC and ETH mining runs properly, but with very fluctuating (56-60Mhs) hashrate!

Binary100100

member

Activity: 180

Merit: 10

So I tried to use the new PhoenixMiner (5.2d) on HiveOS and included the -rxboost command and it's saying, "unable to set straps You have to run PhoenixMiner as administrator to set straps."

I'm embarrassed to ask this... but how do we run the software as administrator?
I stopped the miner, then entered "su" then ran the "miner start" command but it's still saying that I need to run as administrator.

Or maybe this is a PhoenixMiner (Linux) bug?

Thanks!

zydake

newbie

Activity: 7

Merit: 0

Quote from: ?? on ??

Quote from: zydake on November 19, 2020, 09:17:05 PM

Quote from: zeef on November 19, 2020, 06:09:36 PM

Quote from: zydake on November 19, 2020, 05:43:30 PM

Hi everyone

I am having issue with 5.2d

When I turn Phoenix Miner on, it says "Press any key to continue".

Once I press any key with my keyboard, the miner closes

Any idea?

Think is some error in config or bat file..

Any idea what?

Would you mind sharing your config and bat file infos? (delete you wallet number and name if you want)

Quote from: ?? on ??

Quote from: PhoenixMiner on November 19, 2020, 03:10:26 AM

Quote from: ?? on ??

Same version 5.2C and 5.2.D, cause concern with my RX580 8GB cards, I lose MH/S even with daglimit XXXX

I reverted to 5.1C is no longer a problem.

Can you tell us the driver version and what are you mining (ETH or ETC)? We can't detect any loss of hashrate on 8GB cards in our internal testing.

- Driver AMD 19.5.2
- Mining ETH on ethermine.org
- Cards rx580 nitro+ and rx580 nitro+ SE - vram 8Go

Code:

-amd
-acm
-mode 1
-hstats 1
-cclock 1250
-mclock 2250
-cvddc 890
-mvddc 890
-log 0
-tstop 85
-tstart 55
-tt 65
#-fanmin 45
-fanmin 35
-fanmax 100
-cdm 0
-fcm 2
-gpus 1
-clKernel 1
-gser 5
-altinit
-rvram -1
-wdog 0
-rmode 0

What do you advice me ?

Try my config !

I should copy and paste this on my miner note pad? (bat file)

Right under "pause"?

miner29

full member

Activity: 1275

Merit: 141

Quote from: ?? on ??

Have error on reboot of miner. HiveOS, phoenixminer 5.2d.

Code:

Restarting to allocate new DAG buffer
GPU1: Allocating DAG for epoch #388 (4.03) GB
GPU1: Generating DAG for epoch #388

Eth speed: 0.000 MH/s, shares: 398/14/0, time: 2:03
GPUs: 1: 0.000 MH/s (83) 2: 0.000 MH/s (95) 3: 0.000 MH/s (84) 4: 0.000 MH/s (68) 5: 0.000 MH/s (82)

Phoenix Miner 5.2d Linux/gcc - Release build
--------------------------------------------

Waiting 8 s for previous instance to close

phoenixminer exited, waiting to cooldown a bit

Trying to release TIME_WAIT sockets:
tcp 0 0 127.0.0.1:46804 127.0.0.1:3335 TIME_WAIT
tcp 0 0 127.0.0.1:46800 127.0.0.1:3335 TIME_WAIT
tcp 0 0 127.0.0.1:46796 127.0.0.1:3335 TIME_WAIT
tcp 0 0 127.0.0.1:46808 127.0.0.1:3335 TIME_WAIT
tcp 0 0 127.0.0.1:46792 127.0.0.1:3335 TIME_WAIT
tcp 0 0 127.0.0.1:46788 127.0.0.1:3335 TIME_WAIT

phoenixminer miner is already running

> Miner screen is not running

Then miner stop.
Any advice?

What are the cards in the system?
Assume you are mining ETC?

ivomm

legendary

Activity: 1891

Merit: 3096

All good things to those who wait

Quote from: Fascinat on November 20, 2020, 06:56:41 AM

Quote from: ivomm on November 20, 2020, 06:13:41 AM

I am really puzzled by this: On SMOS and HiveOS half of my 8 gb R9 390 hawaii cards are not woking. The same is with lolminer. BUT Claymore works well with 30 Mh/s (moded voltage but not vram timings). May be this is related to the kernel of linux - I know that after Ubuntu 16.04 and kernel 4.10 hawaii is not always working well. My current kernels are - 5.021 amd opencl 18.20 or 19.20. I can't find these os with older kernels.

I am using Windows 8.1, AMD 16.9.2. The R9 390 can work now, all 6 GPU are recognized.

I benchmark it to DAG 378. It can work. But if I use 379, it will show
GPU1: AMD driver 16.9.2
GPU2: AMD driver 16.9.2
GPU3: AMD driver 16.9.2
GPU4: AMD driver 16.9.2
GPU5: AMD driver 16.9.2
GPU6: AMD driver 16.9.2
GPU1: Starting up... (0)
GPU1: Generating ethash light cache for epoch #400
GPU2: Starting up... (0)
GPU3: Starting up... (0)
GPU4: Starting up... (0)
GPU5: Starting up... (0)
GPU6: Starting up... (0)
Light cache generated in 5.1 s (13.0 MB/s)
GPU2: Free VRAM: 7.950 GB; used: 0.050 GB
GPU2: Disabling DAG pre-allocation (not enough VRAM)
GPU2: Allocating DAG for epoch #400 (4.12) GB
GPU2: Allocating buffers failed with: clCreateBuffer (-61).
Fatal error detected. Restarting.
GPU3: Free VRAM: 7.950 GB; used: 0.050 GB
GPU3: Disabling DAG pre-allocation (not enough VRAM)
GPU3: Allocating DAG for epoch #400 (4.12) GB
GPU3: Allocating buffers failed with: clCreateBuffer (-61).
GPU4: Free VRAM: 7.950 GB; used: 0.050 GB
GPU4: Disabling DAG pre-allocation (not enough VRAM)

hawaii cards are recognized as 8GB, it cannot allocate around 4GB memory.

Is that because of the old AMD driver?

Either way, because of driver issues (no matter the version), on Windows, your hash will always be way below 30, may be around 18. That's why I switched to linux OS. With Claymore everything is fine, they hash with 30 Mh without mem timings, but with all other miners, including phoenix, for some reason on half of my 390's (they are all 8Gb), it can't generate the dag. May be with older kernels and drivers it will work, but I can't test it now.

Fascinat

newbie

Activity: 47

Merit: 0

Quote from: ivomm on November 20, 2020, 06:13:41 AM

I am really puzzled by this: On SMOS and HiveOS half of my 8 gb R9 390 hawaii cards are not woking. The same is with lolminer. BUT Claymore works well with 30 Mh/s (moded voltage but not vram timings). May be this is related to the kernel of linux - I know that after Ubuntu 16.04 and kernel 4.10 hawaii is not always working well. My current kernels are - 5.021 amd opencl 18.20 or 19.20. I can't find these os with older kernels.

I am using Windows 8.1, AMD 16.9.2. The R9 390 can work now, all 6 GPU are recognized.

I benchmark it to DAG 378. It can work. But if I use 379, it will show
GPU1: AMD driver 16.9.2
GPU2: AMD driver 16.9.2
GPU3: AMD driver 16.9.2
GPU4: AMD driver 16.9.2
GPU5: AMD driver 16.9.2
GPU6: AMD driver 16.9.2
GPU1: Starting up... (0)
GPU1: Generating ethash light cache for epoch #400
GPU2: Starting up... (0)
GPU3: Starting up... (0)
GPU4: Starting up... (0)
GPU5: Starting up... (0)
GPU6: Starting up... (0)
Light cache generated in 5.1 s (13.0 MB/s)
GPU2: Free VRAM: 7.950 GB; used: 0.050 GB
GPU2: Disabling DAG pre-allocation (not enough VRAM)
GPU2: Allocating DAG for epoch #400 (4.12) GB
GPU2: Allocating buffers failed with: clCreateBuffer (-61).
Fatal error detected. Restarting.
GPU3: Free VRAM: 7.950 GB; used: 0.050 GB
GPU3: Disabling DAG pre-allocation (not enough VRAM)
GPU3: Allocating DAG for epoch #400 (4.12) GB
GPU3: Allocating buffers failed with: clCreateBuffer (-61).
GPU4: Free VRAM: 7.950 GB; used: 0.050 GB
GPU4: Disabling DAG pre-allocation (not enough VRAM)

hawaii cards are recognized as 8GB, it cannot allocate around 4GB memory.

Is that because of the old AMD driver?

Lukke

newbie

Activity: 53

Merit: 0

Is 5.2d available for Linux as well? I'll have to use zombie mode for my 4GB cards as well to be able to mine ETChash. Is it possible yet?

Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 205. (Read 784965 times)