PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 238.

rdbase

legendary

Activity: 2828

Merit: 1497

Join the world-leading crypto sportsbook NOW!

Quote from: farsky on September 17, 2020, 04:10:41 AM

epoch 374.. it seems this is the end for 4 Gb ?
my 470 got 1.5 MH/s

Same!

I think the time has come to say goodbye to your 4gb cards mining for ethereum.
Noticed my rig turning off for no reason with it running stable for the past 2 months non-stop. Undecided

peteycamey

legendary

Activity: 1185

Merit: 1021

I want to use my own timings. how do you disable phoenixminers integrated timings for amd?

duketasos

newbie

Activity: 28

Merit: 0

hello anyone with msi 1070ti? tried straps 1 but no joy after a while. but so far impressive results

2020.09.17:03:07:39.460: main GPUs: 1: 32.419 MH/s (0) 2: 32.733 MH/s (2) 3: 32.853 MH/s (0)
2020.09.17:03:07:41.783: GPU2 CUDA error in CudaProgram.cu:456 : hardware stack error (714)
2020.09.17:03:07:41.783: GPU1 CUDA error in CudaProgram.cu:456 : hardware stack error (714)
2020.09.17:03:07:41.784: GPU1 GPU1 search error: hardware stack error
2020.09.17:03:07:41.784: GPU2 GPU2 search error: hardware stack error
2020.09.17:03:07:41.786: wdog Fatal error detected. Restarting.
2020.09.17:03:07:43.996: GPU3 CUDA error in CudaProgram.cu:456 : hardware stack error (714)
2020.09.17:03:07:43.996: GPU3 GPU3 search error: hardware stack error
2020.09.17:03:07:44.211: hwmc GPU2: set VRAM strap 1 (-vmt1 25 -vmt2 20 -vmt3 0 -vmr 33)
2020.09.17:03:07:44.533: main Eth speed: 0.000 MH/s, shares: 2/0/0, time: 0:03
2020.09.17:03:07:44.533: main GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (2) 3: 0.000 MH/s (0)
2020.09.17:03:07:44.730: hwmc GPU3: set VRAM strap 1 (-vmt1 25 -vmt2 20 -vmt3 0 -vmr 33)
2020.09.17:03:07:44.733: main GPU1: 53C 74% 34W, GPU2: 51C 77% 48W, GPU3: 56C 77% 50W

farsky

hero member

Activity: 2142

Merit: 758

NO WAR ! Glory to Ukraine !

epoch 374.. it seems this is the end for 4 Gb ?
my 470 got 1.5 MH/s

flyingpluto7

newbie

Activity: 2

Merit: 0

Quote from: flyingpluto7 on September 16, 2020, 04:37:37 AM

Quote from: Jackychanda on September 15, 2020, 08:41:35 PM

Quote from: cl4ud1u on September 09, 2020, 11:43:28 PM

Hello,

I'm getting this error after 2 days of mining:

Quote

Eth speed: 311.939 MH/s, shares: 7024/0/0, time: 26:27
GPUs: 1: 51.948 MH/s (1216) 2: 52.040 MH/s (1175) 3: 52.040 MH/s (1161) 4: 51.885 MH/s (1182) 5: 52.022 MH/s (1164) 6: 52.004 MH/s (1126)
Eth: New job #92ed9bce from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #790af2c0 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #a157ed03 from eu1.ethermine.org:4444; diff: 4000MH
0x00007FFE27409389 (0x0000022475BD94A8 0x000002247F867230 0x0000000000000000 0x00000000FFFFFFFE), aclWriteToMem() + 0x1550FC9 bytes(s)
0x00007FFE25C5823E (0x0000000000000000 0x000000FA0FFFFA50 0x000000FA0FFFFA79 0x000002247F867230), clGetPipeInfo() + 0x1D4CE bytes(s)
0x00007FFE25CE3DC9 (0x0000000000021180 0x000002247F867060 0x000000FA0FFFFA79 0x0000000000000020), clGetPipeInfo() + 0xA9059 bytes(s)
0x00007FFE25D0233E (0x0000000000000020 0x000002247F9E6D99 0x0000022470B9AC10 0x000000FA0FFFFBC0), clGetPipeInfo() + 0xC75CE bytes(s)
0x00007FFE25D025A1 (0x0000022476AE46E0 0x000002247F867088 0x000000FA0FFFFC70 0x0000022471062510), clGetPipeInfo() + 0xC7831 bytes(s)
0x00007FFE25CF4636 (0x000002247F867088 0x0000000000000000 0x000002247F9E7000 0x0000000000000000), clGetPipeInfo() + 0xB98C6 bytes(s)
0x00007FFE25C4A7A3 (0x0000022475BD9510 0x000002247F867060 0x00000224768FCAE8 0x00000224768FCAE8), clGetPipeInfo() + 0xFA33 bytes(s)
0x00007FFE25C4A89B (0x0000000000000000 0x0000022476CA11C0 0x0000022476CA11C0 0x0000000000000000), clGetPipeInfo() + 0xFB2B bytes(s)
0x00007FFE25C3B65E (0x0000022476CA11C0 0x0000000000000000 0x0000000000000000 0x0000000000000000), clGetPipeInfo() + 0x8EE bytes(s)
0x00007FFE25C58209 (0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000), clGetPipeInfo() + 0x1D499 bytes(s)
0x00007FFE49408364 (0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000), BaseThreadInitThunk() + 0x14 bytes(s)
0x00007FFE49F85E91 (0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000), RtlUserThreadStart() + 0x21 bytes(s)

C:\Users\a\Desktop\PhoenixMiner_5.1c_Windows>pause
Press any key to continue . . .

Could be a riser problem ?

I was receiving the same error when I had my RX 5700 XT GAMING OC on a test bench plugged directly into the MOBO, so I don't think it is a riser issue. I can't confirm it, but it *seemed* to occur whenever GPU Memory Junction Temperature hit 110 degrees (add -hstats 2 to your bat file to display Tmem temp). I think 110 is when the card starts to throttle and that throws this error for whatever reason in PhoenixMiner. I bumped my -fanmin up to 40 and now my tmem is running at a "cool" 102 degrees. Haven't had the aclwritetomem issue since.

I have this same issue with my RX 5700 XT gigabyte gaming oc (with igors lab mod, no mpt file loaded), I already increased my fan speed to 80% to see much lower memory junction temperature (after 80% fan speed, 80-85C). I'm still getting this errors and sometimes freezes my system. I don't think this is a riser problem. I need some help.

Quote

0x00007FFE27409389 (0x0000022475BD94A8 0x000002247F867230 0x0000000000000000 0x00000000FFFFFFFE), aclWriteToMem() + 0x1550FC9 bytes(s)
0x00007FFE25C5823E (0x0000000000000000 0x000000FA0FFFFA50 0x000000FA0FFFFA79 0x000002247F867230), clGetPipeInfo() + 0x1D4CE bytes(s)
0x00007FFE25CE3DC9 (0x0000000000021180 0x000002247F867060 0x000000FA0FFFFA79 0x0000000000000020), clGetPipeInfo() + 0xA9059 bytes(s)
0x00007FFE25D0233E (0x0000000000000020 0x000002247F9E6D99 0x0000022470B9AC10 0x000000FA0FFFFBC0), clGetPipeInfo() + 0xC75CE bytes(s)
0x00007FFE25D025A1 (0x0000022476AE46E0 0x000002247F867088 0x000000FA0FFFFC70 0x0000022471062510), clGetPipeInfo() + 0xC7831 bytes(s)
0x00007FFE25CF4636 (0x000002247F867088 0x0000000000000000 0x000002247F9E7000 0x0000000000000000), clGetPipeInfo() + 0xB98C6 bytes(s)
0x00007FFE25C4A7A3 (0x0000022475BD9510 0x000002247F867060 0x00000224768FCAE8 0x00000224768FCAE8), clGetPipeInfo() + 0xFA33 bytes(s)
0x00007FFE25C4A89B (0x0000000000000000 0x0000022476CA11C0 0x0000022476CA11C0 0x0000000000000000), clGetPipeInfo() + 0xFB2B bytes(s)
0x00007FFE25C3B65E (0x0000022476CA11C0 0x0000000000000000 0x0000000000000000 0x0000000000000000), clGetPipeInfo() + 0x8EE bytes(s)
0x00007FFE25C58209 (0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000), clGetPipeInfo() + 0x1D499 bytes(s)
0x00007FFE49408364 (0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000), BaseThreadInitThunk() + 0x14 bytes(s)
0x00007FFE49F85E91 (0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000), RtlUserThreadStart() + 0x21 bytes(s)

C:\Miners\PhoenixMiner_5.1c_Windows>pause
Press any key to continue . . .

I think I just solved my issue by downloading all the visual c++ redistributable runtimes (check the link below to download all the redist runtimes). My rig is running 26 hours straight now.

https://www.techpowerup.com/download/visual-c-redistributable-runtime-package-all-in-one/

maxchch

newbie

Activity: 1

Merit: 0

Option "-log 1", not working under W10 with PhoenixMiner 5.1c.
File not exists. I try using other values "2", changing logfilename/directory with "Everyone" permissions . No success.

xsoft

newbie

Activity: 60

Merit: 0

Quote from: ?? on ??

Modded bios for Radeon RX5700XT(X) 50th anniversary, can be used on any 5700XT with turbine cooling (tested by me), could be work for many 5700XT graphic cards (not for sapphire Nitro+, tested and not working).

Here is modded bios (freq, voltage, timmings, fan) called 875.rom with stock memory, 875MHz (1750MHz), I use this from 2 months ago, 0 crashes, gives approx 53,7xxMH for under 95Watts showed by GPU-Z.

No needed to use any OC software, like afterburner, etc.

https://mega.nz/file/5xFzDISD#o1sRwREagG4Ph0qwYHdFIHavwA_hZ5x2TatJw_UGgHE

Click on picture(s) for max resolution, I use Windows 10 Pro 1909 edition, modded by NTLite software (removed antivirus, updates and alot of useless junks), with Adrenalin 20.4.2 as video driver :

https://postimg.cc/RNtbMcKN

https://postimg.cc/142jhWgk

Here is modded bios (freq, voltage, timmings, fan) called 885.rom with a little OC memory, 885MHz (1770MHz), also stable but I prefear stock memory freq, gives approx 54,6xxMH for under 95Watts showed by GPU-Z.

No needed to use any OC software, like afterburner, etc.

https://mega.nz/file/h0FnRSDZ#TotH4JgWXfg8I43xebeUFaUz-Yxg4ekIbUQhNArzFpU

Hi,
do you have any more tips for edition BIOSes outside this 5700xt edition? (like for Pulse, or Sapphie) - BIOS editor, BIOS romes, straps, ... .
Your number looks great, but Im not on those types of 5700xt.
To handle OC jsut via BIOS and avoit to use PhoenixMiner to set those by params, would be great.

flyingpluto7

newbie

Activity: 2

Merit: 0

Quote from: Jackychanda on September 15, 2020, 08:41:35 PM

Quote from: cl4ud1u on September 09, 2020, 11:43:28 PM

Hello,

I'm getting this error after 2 days of mining:

Quote

Eth speed: 311.939 MH/s, shares: 7024/0/0, time: 26:27
GPUs: 1: 51.948 MH/s (1216) 2: 52.040 MH/s (1175) 3: 52.040 MH/s (1161) 4: 51.885 MH/s (1182) 5: 52.022 MH/s (1164) 6: 52.004 MH/s (1126)
Eth: New job #92ed9bce from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #790af2c0 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #a157ed03 from eu1.ethermine.org:4444; diff: 4000MH
0x00007FFE27409389 (0x0000022475BD94A8 0x000002247F867230 0x0000000000000000 0x00000000FFFFFFFE), aclWriteToMem() + 0x1550FC9 bytes(s)
0x00007FFE25C5823E (0x0000000000000000 0x000000FA0FFFFA50 0x000000FA0FFFFA79 0x000002247F867230), clGetPipeInfo() + 0x1D4CE bytes(s)
0x00007FFE25CE3DC9 (0x0000000000021180 0x000002247F867060 0x000000FA0FFFFA79 0x0000000000000020), clGetPipeInfo() + 0xA9059 bytes(s)
0x00007FFE25D0233E (0x0000000000000020 0x000002247F9E6D99 0x0000022470B9AC10 0x000000FA0FFFFBC0), clGetPipeInfo() + 0xC75CE bytes(s)
0x00007FFE25D025A1 (0x0000022476AE46E0 0x000002247F867088 0x000000FA0FFFFC70 0x0000022471062510), clGetPipeInfo() + 0xC7831 bytes(s)
0x00007FFE25CF4636 (0x000002247F867088 0x0000000000000000 0x000002247F9E7000 0x0000000000000000), clGetPipeInfo() + 0xB98C6 bytes(s)
0x00007FFE25C4A7A3 (0x0000022475BD9510 0x000002247F867060 0x00000224768FCAE8 0x00000224768FCAE8), clGetPipeInfo() + 0xFA33 bytes(s)
0x00007FFE25C4A89B (0x0000000000000000 0x0000022476CA11C0 0x0000022476CA11C0 0x0000000000000000), clGetPipeInfo() + 0xFB2B bytes(s)
0x00007FFE25C3B65E (0x0000022476CA11C0 0x0000000000000000 0x0000000000000000 0x0000000000000000), clGetPipeInfo() + 0x8EE bytes(s)
0x00007FFE25C58209 (0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000), clGetPipeInfo() + 0x1D499 bytes(s)
0x00007FFE49408364 (0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000), BaseThreadInitThunk() + 0x14 bytes(s)
0x00007FFE49F85E91 (0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000), RtlUserThreadStart() + 0x21 bytes(s)

C:\Users\a\Desktop\PhoenixMiner_5.1c_Windows>pause
Press any key to continue . . .

Could be a riser problem ?

I was receiving the same error when I had my RX 5700 XT GAMING OC on a test bench plugged directly into the MOBO, so I don't think it is a riser issue. I can't confirm it, but it *seemed* to occur whenever GPU Memory Junction Temperature hit 110 degrees (add -hstats 2 to your bat file to display Tmem temp). I think 110 is when the card starts to throttle and that throws this error for whatever reason in PhoenixMiner. I bumped my -fanmin up to 40 and now my tmem is running at a "cool" 102 degrees. Haven't had the aclwritetomem issue since.

I have this same issue with my RX 5700 XT gigabyte gaming oc (with igors lab mod, no mpt file loaded), I already increased my fan speed to 80% to see much lower memory junction temperature (after 80% fan speed, 80-85C). I'm still getting this errors and sometimes freezes my system. I don't think this is a riser problem. I need some help.

Quote

0x00007FFE27409389 (0x0000022475BD94A8 0x000002247F867230 0x0000000000000000 0x00000000FFFFFFFE), aclWriteToMem() + 0x1550FC9 bytes(s)
0x00007FFE25C5823E (0x0000000000000000 0x000000FA0FFFFA50 0x000000FA0FFFFA79 0x000002247F867230), clGetPipeInfo() + 0x1D4CE bytes(s)
0x00007FFE25CE3DC9 (0x0000000000021180 0x000002247F867060 0x000000FA0FFFFA79 0x0000000000000020), clGetPipeInfo() + 0xA9059 bytes(s)
0x00007FFE25D0233E (0x0000000000000020 0x000002247F9E6D99 0x0000022470B9AC10 0x000000FA0FFFFBC0), clGetPipeInfo() + 0xC75CE bytes(s)
0x00007FFE25D025A1 (0x0000022476AE46E0 0x000002247F867088 0x000000FA0FFFFC70 0x0000022471062510), clGetPipeInfo() + 0xC7831 bytes(s)
0x00007FFE25CF4636 (0x000002247F867088 0x0000000000000000 0x000002247F9E7000 0x0000000000000000), clGetPipeInfo() + 0xB98C6 bytes(s)
0x00007FFE25C4A7A3 (0x0000022475BD9510 0x000002247F867060 0x00000224768FCAE8 0x00000224768FCAE8), clGetPipeInfo() + 0xFA33 bytes(s)
0x00007FFE25C4A89B (0x0000000000000000 0x0000022476CA11C0 0x0000022476CA11C0 0x0000000000000000), clGetPipeInfo() + 0xFB2B bytes(s)
0x00007FFE25C3B65E (0x0000022476CA11C0 0x0000000000000000 0x0000000000000000 0x0000000000000000), clGetPipeInfo() + 0x8EE bytes(s)
0x00007FFE25C58209 (0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000), clGetPipeInfo() + 0x1D499 bytes(s)
0x00007FFE49408364 (0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000), BaseThreadInitThunk() + 0x14 bytes(s)
0x00007FFE49F85E91 (0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000), RtlUserThreadStart() + 0x21 bytes(s)

C:\Miners\PhoenixMiner_5.1c_Windows>pause
Press any key to continue . . .

Jackychanda

newbie

Activity: 1

Merit: 0

Quote from: cl4ud1u on September 09, 2020, 11:43:28 PM

Hello,

I'm getting this error after 2 days of mining:

Quote

Eth speed: 311.939 MH/s, shares: 7024/0/0, time: 26:27
GPUs: 1: 51.948 MH/s (1216) 2: 52.040 MH/s (1175) 3: 52.040 MH/s (1161) 4: 51.885 MH/s (1182) 5: 52.022 MH/s (1164) 6: 52.004 MH/s (1126)
Eth: New job #92ed9bce from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #790af2c0 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #a157ed03 from eu1.ethermine.org:4444; diff: 4000MH
0x00007FFE27409389 (0x0000022475BD94A8 0x000002247F867230 0x0000000000000000 0x00000000FFFFFFFE), aclWriteToMem() + 0x1550FC9 bytes(s)
0x00007FFE25C5823E (0x0000000000000000 0x000000FA0FFFFA50 0x000000FA0FFFFA79 0x000002247F867230), clGetPipeInfo() + 0x1D4CE bytes(s)
0x00007FFE25CE3DC9 (0x0000000000021180 0x000002247F867060 0x000000FA0FFFFA79 0x0000000000000020), clGetPipeInfo() + 0xA9059 bytes(s)
0x00007FFE25D0233E (0x0000000000000020 0x000002247F9E6D99 0x0000022470B9AC10 0x000000FA0FFFFBC0), clGetPipeInfo() + 0xC75CE bytes(s)
0x00007FFE25D025A1 (0x0000022476AE46E0 0x000002247F867088 0x000000FA0FFFFC70 0x0000022471062510), clGetPipeInfo() + 0xC7831 bytes(s)
0x00007FFE25CF4636 (0x000002247F867088 0x0000000000000000 0x000002247F9E7000 0x0000000000000000), clGetPipeInfo() + 0xB98C6 bytes(s)
0x00007FFE25C4A7A3 (0x0000022475BD9510 0x000002247F867060 0x00000224768FCAE8 0x00000224768FCAE8), clGetPipeInfo() + 0xFA33 bytes(s)
0x00007FFE25C4A89B (0x0000000000000000 0x0000022476CA11C0 0x0000022476CA11C0 0x0000000000000000), clGetPipeInfo() + 0xFB2B bytes(s)
0x00007FFE25C3B65E (0x0000022476CA11C0 0x0000000000000000 0x0000000000000000 0x0000000000000000), clGetPipeInfo() + 0x8EE bytes(s)
0x00007FFE25C58209 (0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000), clGetPipeInfo() + 0x1D499 bytes(s)
0x00007FFE49408364 (0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000), BaseThreadInitThunk() + 0x14 bytes(s)
0x00007FFE49F85E91 (0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000), RtlUserThreadStart() + 0x21 bytes(s)

C:\Users\a\Desktop\PhoenixMiner_5.1c_Windows>pause
Press any key to continue . . .

Could be a riser problem ?

I was receiving the same error when I had my RX 5700 XT GAMING OC on a test bench plugged directly into the MOBO, so I don't think it is a riser issue. I can't confirm it, but it *seemed* to occur whenever GPU Memory Junction Temperature hit 110 degrees (add -hstats 2 to your bat file to display Tmem temp). I think 110 is when the card starts to throttle and that throws this error for whatever reason in PhoenixMiner. I bumped my -fanmin up to 40 and now my tmem is running at a "cool" 102 degrees. Haven't had the aclwritetomem issue since.

waywoos

jr. member

Activity: 124

Merit: 2

Quote from: cmrho13 on September 15, 2020, 04:24:16 PM

I've read through the command list several times tried the -fcm 2, -fanmin option to no avail. I'd love to discard afterburner altogether but still need it to run the fans. Any tips from the gurus here? Thanks.

Had this exact problem before. Only thing that fixed it was fresh install of windows.

cmrho13

newbie

Activity: 3

Merit: 0

I've read through the command list several times tried the -fcm 2, -fanmin option to no avail. I'd love to discard afterburner altogether but still need it to run the fans. Any tips from the gurus here? Thanks.

_javi_

hero member

Activity: 968

Merit: 624

Still a manic miner

Quote from: Marginmasters on September 14, 2020, 05:49:00 PM

there is nothing to fix, since this is not a breakdown, but you need to insert a monitor emulator as always, it's time to know this since you have been since 2014

From 2014 to 2016 i had a Sapp 7950/280x farm..
2016 to present Aorus 1070's .. No need for vga plugs, no unstable drivers.. and profitable mining until today (eth 30mhs/125w). Not a single regret being on the green side.

But 5700xt's are worth a try and i got a nice deal on Asrock Taichis.

back to the subject..
I used a VGA/DVI adapter with some resistors back then, whats used nowadays in the digital connectors for monitor emulator??

thanks for your answer!

edit: answering myself:
https://www.headlessghost.com/

Marginmasters

newbie

Activity: 68

Merit: 0

there is nothing to fix, since this is not a breakdown, but you need to insert a monitor emulator as always, it's time to know this since you have been since 2014

_javi_

hero member

Activity: 968

Merit: 624

Still a manic miner

Is Windows 10 detecting monitor presence??

If i run the rig (3x 5700xt) with no monitor cable attached, that card doesnt hash as fast as the others...

Phoenix miner set mem and core freq/volt ok for mining activity...but 2 cards hash ok (listed as "discrete" in Wattman, and 1 goes half speed ("primary/discrete")

( I used to need a VGA plug in 2014 for the HD7950... dont tell me thats not fixed in AMD drivers yet..)

echo00114

member

Activity: 72

Merit: 10

Quote from: ManuBBXX on September 14, 2020, 02:36:30 PM

Quote from: ?? on ??

Put here ROM file.

I tried this bios (re-modded by me, better said, bios was first modded with RBE by a friend of mine, I just adjusted fan speed and mem freq) ONLY on Sapphire 5700XT turbine cooling (reference board) and works.

Bios is from 50th anniversary (XTX).

Tried on sapphire Nitro+ and doesn-t work, as I said.

I think will work only on reference board with turbine cooling.

Does your modded bios have other timing tweaks other than straps 1500 ?

hello

i look the moded bios from guzzymese with RBE and 1500 strap timing same 1800 2000 and 2250 so yes 1500 mhz strap copy
and i look my MSI RX 5700 XT 8 GB BIOS Mech OC and 1500 mhz strap same the moded bios 1500 mhz timing .
so i moded my original msi bios i think beter work
here the timing:
"000000000F040000000000007A09000040030000162D170F4400170006060002180000000708080 018000000210C07000000010101000101001C1800220B00000F0F0000B4000000B40000004F5178 025A0000000C000A0F150500011F2A0C00B4000000CBF4130FB400000000000000"
without ""

i hope help my answer bye
ps : witch software detect the memory type samsung or micron ?

ManuBBXX

full member

Activity: 839

Merit: 100

Quote from: ?? on ??

Put here ROM file.

I tried this bios (re-modded by me, better said, bios was first modded with RBE by a friend of mine, I just adjusted fan speed and mem freq) ONLY on Sapphire 5700XT turbine cooling (reference board) and works.

Bios is from 50th anniversary (XTX).

Tried on sapphire Nitro+ and doesn-t work, as I said.

I think will work only on reference board with turbine cooling.

Does your modded bios have other timing tweaks other than straps 1500 ?

br2459

full member

Activity: 269

Merit: 102

Quote from: echo00114 on September 12, 2020, 01:40:58 PM

@guzzymese
if possible tel me tested this bios MSI RX 5700 XT MECH OC
thank you

I modded my own BIOS with a process of just copying the 1550 straps on down. After that I get 54MH/s out of them. Always back up the original BIOS before any modifications with GPU-Z. I also have several Mech 5700 non-XT's that I flashed the XT BIOS on and work at 54MH/s with the straps as well.

echo00114

member

Activity: 72

Merit: 10

Quote from: ?? on ??

Quote from: echo00114 on September 12, 2020, 01:40:58 PM

@guzzymese
if possible tel me tested this bios MSI RX 5700 XT MECH OC
thank you

You can try it bioses that I have uploaded, but first SAVE original bios using GPU-Z!

I have just 5700XT Sapphire and 5700XTX (AMD 50'th anniversary) both turbine cooling, and work flawless, both cards.

hello ok i try one card and tell the results

which bios editor to use? if not working your bios i copy mem timing my original bios if possible.
bye

ManuBBXX

full member

Activity: 839

Merit: 100

Quote from: ?? on ??

Modded bios for Radeon RX5700XT(X) 50th anniversary, can be used on any 5700XT with turbine cooling (tested by me), could be work for many 5700XT graphic cards (not for sapphire Nitro+, tested and not working).

Here is modded bios (freq, voltage, timmings, fan) called 875.rom with stock memory, 875MHz (1750MHz), I use this from 2 months ago, 0 crashes, gives approx 53,7xxMH for under 95Watts showed by GPU-Z.

No needed to use any OC software, like afterburner, etc.

https://mega.nz/file/5xFzDISD#o1sRwREagG4Ph0qwYHdFIHavwA_hZ5x2TatJw_UGgHE

Click on picture(s) for max resolution, I use Windows 10 Pro 1909 edition, modded by NTLite software (removed antivirus, updates and alot of useless junks), with Adrenalin 20.4.2 as video driver :

https://postimg.cc/RNtbMcKN

https://postimg.cc/142jhWgk

Here is modded bios (freq, voltage, timmings, fan) called 885.rom with a little OC memory, 885MHz (1770MHz), also stable but I prefear stock memory freq, gives approx 54,6xxMH for under 95Watts showed by GPU-Z.

No needed to use any OC software, like afterburner, etc.

https://mega.nz/file/h0FnRSDZ#TotH4JgWXfg8I43xebeUFaUz-Yxg4ekIbUQhNArzFpU

This bios doesn't work on my Asrock challenger 5700XT

Recognized by windows on 50th anniversary, but not installed properly
Is it normal ?

Otherwise, can I grab somewhere an optimized bios with right timings ? Or maybe can you explain the timing edits you did in RBE ?

I only did the 1500 straps mod, but I can't get 55 mhs lower than 125w ..

alucard20724

sr. member

Activity: 703

Merit: 272

Quote from: ?? on ??

Hi all!
Hash speed as shown, optimized yet everyone(5700 XT Red Devil ).
https_://postimg.cc/wyPJz8CJ
Thanks!

no post in two years.
is this another one of those hacked accounts? Roll Eyes

Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 238. (Read 784965 times)