PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 241.

zeezoo

newbie

Activity: 42

Merit: 0

Quote from: Digital_Seytan on September 06, 2020, 07:14:50 AM

-straps 1 (Nvidia cards 10x0 series) run as with administrator rights, but when I place the bat file in the auto start win 10 it will not start why?

Quote from: ?? on ??

Quote from: jebidia on September 02, 2020, 08:57:52 AM

Anyone have luck with the -straps function?

-straps Memory strap level (Nvidia cards 10x0 series only). The possible values are 0 to 6. 0 is the default value and uses the default
timings from the VBIOS. Each strap level corresponds to a predefined combination of memory timings (-vmt1, -vmt2,
-vmt3, -vmr). Strap level 3 is the fastest predefined level and may not work on most cards, 1 is the slowest (but still faster than
the default timings). Strap levels 4 to 6 are the same as 1 to 3 but with less aggressive refresh rates (i.e. lower "-vmr" values).

I'm getting an error 31 Must be run as administrator...Tried to do so but still getting the error...Wanted to see if this feature could be used instead of the ethlrgmentpl

Right-click the program icon (PhoniexMiner.exe).
Choose Properties.
On the Compatibility tab, select the Run This Program As An Administrator option.
Click OK.
Grin

Digital_Seytan

jr. member

Activity: 222

Merit: 2

[email protected]

-straps 1 (Nvidia cards 10x0 series) run as with administrator rights, but when I place the bat file in the auto start win 10 it will not start why?

zeezoo

newbie

Activity: 42

Merit: 0

Quote from: jebidia on September 05, 2020, 03:55:30 PM

Quote from: temporalminer on September 04, 2020, 01:01:49 PM

Quote from: ?? on ??

Quote from: jebidia on September 02, 2020, 08:57:52 AM

Anyone have luck with the -straps function?

-straps Memory strap level (Nvidia cards 10x0 series only). The possible values are 0 to 6. 0 is the default value and uses the default
timings from the VBIOS. Each strap level corresponds to a predefined combination of memory timings (-vmt1, -vmt2,
-vmt3, -vmr). Strap level 3 is the fastest predefined level and may not work on most cards, 1 is the slowest (but still faster than
the default timings). Strap levels 4 to 6 are the same as 1 to 3 but with less aggressive refresh rates (i.e. lower "-vmr" values).

I'm getting an error 31 Must be run as administrator...Tried to do so but still getting the error...Wanted to see if this feature could be used instead of the ethlrgmentpl

Right-click the program icon (PhoniexMiner.exe).
Choose Properties.
On the Compatibility tab, select the Run This Program As An Administrator option.
Click OK.
Grin

The problem he is having and I am as well is that even after running as admin the error appears: "Invalid option: -straps"

Yes, I had already tried this and it doesn't work

You didn't specify what card are you trying to apply straps for... If you get invalid option you should probably update PhoenixMiner to latest version. https://mega.nz/folder/2VskDJrI#lsQsz1CdDe8x5cH3L8QaBw

superasianover9000

newbie

Activity: 3

Merit: 0

Anyone kind enough to help me out with some good settings for 8 Sapphire RX570 16GB cards for mining ETH on Linux Ubuntu 18.04.4 (currently using 18.50 AMDgpu drivers)?

I've had a few issues (Everything is stock, both the cards and miner.):

1. After about a full day or 2 of mining it would give me an error about Vram where I must do a whole system shut down for the miner to work again. Which makes little sense to me as the card has 16GB of RAM.

2. Threads are getting stuck, again stopping the miner to where I must do a system shut down for the miner to work again.

I appreciate any input and/or guidance to get this setup to achieve stability, thank you.

jebidia

jr. member

Activity: 161

Merit: 1

Quote from: temporalminer on September 04, 2020, 01:01:49 PM

Quote from: ?? on ??

Quote from: jebidia on September 02, 2020, 08:57:52 AM

Anyone have luck with the -straps function?

-straps Memory strap level (Nvidia cards 10x0 series only). The possible values are 0 to 6. 0 is the default value and uses the default
timings from the VBIOS. Each strap level corresponds to a predefined combination of memory timings (-vmt1, -vmt2,
-vmt3, -vmr). Strap level 3 is the fastest predefined level and may not work on most cards, 1 is the slowest (but still faster than
the default timings). Strap levels 4 to 6 are the same as 1 to 3 but with less aggressive refresh rates (i.e. lower "-vmr" values).

I'm getting an error 31 Must be run as administrator...Tried to do so but still getting the error...Wanted to see if this feature could be used instead of the ethlrgmentpl

Right-click the program icon (PhoniexMiner.exe).
Choose Properties.
On the Compatibility tab, select the Run This Program As An Administrator option.
Click OK.
Grin

The problem he is having and I am as well is that even after running as admin the error appears: "Invalid option: -straps"

Yes, I had already tried this and it doesn't work

vannn

newbie

Activity: 10

Merit: 0

what about straps for rtx? now only 42mh on rtx 2070super

DrG

legendary

Activity: 2086

Merit: 1035

Quote from: forato on September 04, 2020, 12:02:43 PM

Quote from: DrG on September 03, 2020, 11:34:06 PM

Quote from: forato on September 03, 2020, 10:13:15 PM

does anyone know if in the near future we will be able to mine with 4gb cards if one of the rig cards have 8gb?

For ETH/ETC in 1-2 month no 4GB card will be able to mine as the DAG will not be able to be loaded into the VRAM. Moving to Linux might buy you 2-4 more epochs but come December 20202 only 6GB and above cards can mine ETH/ETC. Same with ASIC that only have 4GB memory.

The options then for 4GB cards would be to sell or mine something like RVN - but you'll be looking to compete with millions of 470/480/570/580 owners. Craigslist and eBay will be flooded with them.

But are you sure that if the rig has at least 1 8GB and the rest 4GB will not work?

The whole reason ETH had been immune to ASICs initially was the DAG. If you could load it into traditional DDR memory the ASICS would have RAM slots as RAM is relatively cheap. VRAM, GDDR6, is not cheap.

If you have an 8 and 4GB rig, the only card that can mine is the 8GB card. The DAG cannot fit on a 4GB card once it exceeds 4GB in size. You can't put 120ml of liquid into a 100ml container.

Other coins that have a smaller DAG such as UBIQ can be mined on those 4GB cards.

temporalminer

newbie

Activity: 12

Merit: 0

Quote from: ?? on ??

Quote from: jebidia on September 02, 2020, 08:57:52 AM

Anyone have luck with the -straps function?

-straps Memory strap level (Nvidia cards 10x0 series only). The possible values are 0 to 6. 0 is the default value and uses the default
timings from the VBIOS. Each strap level corresponds to a predefined combination of memory timings (-vmt1, -vmt2,
-vmt3, -vmr). Strap level 3 is the fastest predefined level and may not work on most cards, 1 is the slowest (but still faster than
the default timings). Strap levels 4 to 6 are the same as 1 to 3 but with less aggressive refresh rates (i.e. lower "-vmr" values).

I'm getting an error 31 Must be run as administrator...Tried to do so but still getting the error...Wanted to see if this feature could be used instead of the ethlrgmentpl

Right-click the program icon (PhoniexMiner.exe).
Choose Properties.
On the Compatibility tab, select the Run This Program As An Administrator option.
Click OK.
Grin

The problem he is having and I am as well is that even after running as admin the error appears: "Invalid option: -straps"

forato

full member

Activity: 237

Merit: 100

Quote from: DrG on September 03, 2020, 11:34:06 PM

Quote from: forato on September 03, 2020, 10:13:15 PM

does anyone know if in the near future we will be able to mine with 4gb cards if one of the rig cards have 8gb?

For ETH/ETC in 1-2 month no 4GB card will be able to mine as the DAG will not be able to be loaded into the VRAM. Moving to Linux might buy you 2-4 more epochs but come December 20202 only 6GB and above cards can mine ETH/ETC. Same with ASIC that only have 4GB memory.

The options then for 4GB cards would be to sell or mine something like RVN - but you'll be looking to compete with millions of 470/480/570/580 owners. Craigslist and eBay will be flooded with them.

But are you sure that if the rig has at least 1 8GB and the rest 4GB will not work?

DrG

legendary

Activity: 2086

Merit: 1035

Quote from: forato on September 03, 2020, 10:13:15 PM

does anyone know if in the near future we will be able to mine with 4gb cards if one of the rig cards have 8gb?

For ETH/ETC in 1-2 month no 4GB card will be able to mine as the DAG will not be able to be loaded into the VRAM. Moving to Linux might buy you 2-4 more epochs but come December 20202 only 6GB and above cards can mine ETH/ETC. Same with ASIC that only have 4GB memory.

The options then for 4GB cards would be to sell or mine something like RVN - but you'll be looking to compete with millions of 470/480/570/580 owners. Craigslist and eBay will be flooded with them.

forato

full member

Activity: 237

Merit: 100

does anyone know if in the near future we will be able to mine with 4gb cards if one of the rig cards have 8gb?

garciaajx2008

newbie

Activity: 1

Merit: 0

Asus 1060 6 GB straps 2 before 18 mhash now 23 mhash

john1010

hero member

Activity: 2114

Merit: 562

Quote from: rasmukri on September 02, 2020, 06:02:52 PM

Is there any gain by over locking in the config file instead of using something like afterburner?
I use afterburner and it works pretty damn good. Just wondering if there is some sort of performance gain to do it in the config for the miner instead.

Using Afterburner will frustrate you, better to make your own experiment in doing some trial and error in the command line of Phoenix miner or you can modify your card and set a proper strap for every card yo have, but moding is too risky it may damage and brick your card.

greasepit

newbie

Activity: 28

Merit: 1

Quote from: rasmukri on September 02, 2020, 06:02:52 PM

Is there any gain by over locking in the config file instead of using something like afterburner?
I use afterburner and it works pretty damn good. Just wondering if there is some sort of performance gain to do it in the config for the miner instead.

There are some miners with no clock settings built in, so you will need a third party software.
IMO Afterburner is for amauters or testing stability before going live because in case of power loss your cards can reset the clocks to default, setting on the miner cfg or either on the BIOS your cards will never miss clocks settings. You can set a script as well.

xeridea

sr. member

Activity: 449

Merit: 251

Quote from: rasmukri on September 02, 2020, 06:02:52 PM

Is there any gain by over locking in the config file instead of using something like afterburner?
I use afterburner and it works pretty damn good. Just wondering if there is some sort of performance gain to do it in the config for the miner instead.

Performance don't think so. I think clocks may be more set in stone on some cards with config though. Also if you switch coins easier to set different for each one. Also easier to change en masse with config, or through remote manager. If tuning each card, using config make it easier to adjust for instability since numbers in log same as order you set them... Down to preference really.

xeridea

sr. member

Activity: 449

Merit: 251

Quote from: GODLIKEE on September 02, 2020, 07:23:20 AM

Quote from: Iamtutut on September 01, 2020, 04:38:04 PM

Would anyone share settings for Gigabyte RX64 gaming ? Thanks

the best you can get on that gpu is 43mh/s. if you raise the tRef over 4k it crash always

Use claymore to set straps, then mine with TeamRedMiner, I get upwards of 50MH on reference Vega 56....

rasmukri

jr. member

Activity: 56

Merit: 4

Is there any gain by over locking in the config file instead of using something like afterburner?
I use afterburner and it works pretty damn good. Just wondering if there is some sort of performance gain to do it in the config for the miner instead.

temporalminer

newbie

Activity: 12

Merit: 0

Quote from: jebidia on September 02, 2020, 08:57:52 AM

Anyone have luck with the -straps function?

-straps Memory strap level (Nvidia cards 10x0 series only). The possible values are 0 to 6. 0 is the default value and uses the default
timings from the VBIOS. Each strap level corresponds to a predefined combination of memory timings (-vmt1, -vmt2,
-vmt3, -vmr). Strap level 3 is the fastest predefined level and may not work on most cards, 1 is the slowest (but still faster than
the default timings). Strap levels 4 to 6 are the same as 1 to 3 but with less aggressive refresh rates (i.e. lower "-vmr" values).

I'm getting an error 31 Must be run as administrator...Tried to do so but still getting the error...Wanted to see if this feature could be used instead of the ethlrgmentpl

I'm having the same problem. I would like some assistance please.

jebidia

jr. member

Activity: 161

Merit: 1

Anyone have luck with the -straps function?

-straps Memory strap level (Nvidia cards 10x0 series only). The possible values are 0 to 6. 0 is the default value and uses the default
timings from the VBIOS. Each strap level corresponds to a predefined combination of memory timings (-vmt1, -vmt2,
-vmt3, -vmr). Strap level 3 is the fastest predefined level and may not work on most cards, 1 is the slowest (but still faster than
the default timings). Strap levels 4 to 6 are the same as 1 to 3 but with less aggressive refresh rates (i.e. lower "-vmr" values).

I'm getting an error 31 Must be run as administrator...Tried to do so but still getting the error...Wanted to see if this feature could be used instead of the ethlrgmentpl

GODLIKEE

newbie

Activity: 26

Merit: 2

Quote from: Iamtutut on September 01, 2020, 04:38:04 PM

Would anyone share settings for Gigabyte RX64 gaming ? Thanks

the best you can get on that gpu is 43mh/s. if you raise the tRef over 4k it crash always

Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 241. (Read 784965 times)