hi guys, need help here with P104 gpus
Unable to set -straps
https://i.imgur.com/OAIc7aQ.png
Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 250. (Read 784965 times)
August 14, 2020, 10:19:46 AM
August 14, 2020, 09:40:04 AM
Hey guys, any thoughts on this
- I am running multiple machines and I have them at two locations, but both seem to be getting a lot of STALE SHARES - even 20-30%
- 1) any general advice to reducing stale share percentage? apart from "get quality connection from a good ISP"
- 2) could it be that phoenix miner is inaccurate when counting stale shares? if so, any way around it?
thank you
- I am running multiple machines and I have them at two locations, but both seem to be getting a lot of STALE SHARES - even 20-30%
- 1) any general advice to reducing stale share percentage? apart from "get quality connection from a good ISP"
- 2) could it be that phoenix miner is inaccurate when counting stale shares? if so, any way around it?
thank you
August 14, 2020, 06:36:34 AM
For me the best straps option is giving same hashrate but consuming 2 watts more pre gpu. Does it mean more headroom to overclock ? :-)
August 14, 2020, 05:38:22 AM
So, with -straps 2 on my 1080ti, I get around 48 mh/s on the MINER, but the reported hashrate on the pool (2miners) is only 35 mh/s
On average hashrate on the pool, 35mh/s too
So it does not work well ?
On average hashrate on the pool, 35mh/s too
So it does not work well ?
How you managed to run the miner with -straps 2. When I try to use it it give me an error message?
Launch bat file from CMD in administrator mode
Already tried that, but it gives me an error that phoenixminer.exe is not a recognised command.
right click on phoenixminer.exe, select properties,click on the compatibility tab, check run as admin.
or
include the full path to phoenixminer.exe in you bat file. (c:\folderwherephoenixminer.exe is\phoenixminer.exe ). run cmd as admin, then you bat file
August 14, 2020, 02:14:22 AM
Hello,
One of my rig (570 4gb) already running smooth for 10 days. But today suddenly GPU 1 become 3 mh/s from 29 mh/s. And the system is unstable, after 10 minutes alywas hangs.
I already reinstalled the driver, set the virtual memory to 200000. Nothing changed, GPU 1 still 3 mh/s.
Any clue about my rig problems?
thank you
You need Windows 10 + drivers 20.4.2.One of my rig (570 4gb) already running smooth for 10 days. But today suddenly GPU 1 become 3 mh/s from 29 mh/s. And the system is unstable, after 10 minutes alywas hangs.
I already reinstalled the driver, set the virtual memory to 200000. Nothing changed, GPU 1 still 3 mh/s.
Any clue about my rig problems?
thank you
Already use win 10 & drivers 20.4.2.
But still got the same problems.
In AMD Radeon software put GPU 1 to compute and restart the rig. I tried it and it worked
Already set this. Nothing changed, still same.
August 14, 2020, 02:12:46 AM
Hello,
One of my rig (570 4gb) already running smooth for 10 days. But today suddenly GPU 1 become 3 mh/s from 29 mh/s. And the system is unstable, after 10 minutes alywas hangs.
I already reinstalled the driver, set the virtual memory to 200000. Nothing changed, GPU 1 still 3 mh/s.
Any clue about my rig problems?
thank you
You need Windows 10 + drivers 20.4.2.One of my rig (570 4gb) already running smooth for 10 days. But today suddenly GPU 1 become 3 mh/s from 29 mh/s. And the system is unstable, after 10 minutes alywas hangs.
I already reinstalled the driver, set the virtual memory to 200000. Nothing changed, GPU 1 still 3 mh/s.
Any clue about my rig problems?
thank you
Already use win 10 & drivers 20.4.2.
But still got the same problems.
In AMD Radeon software put GPU 1 to compute and restart the rig. I tried it and it worked
Already set this. Nothing changed, still same.
August 14, 2020, 01:33:12 AM
Anyone here mining with 4GB using Ubuntu 16.04?
For some reason I can't get Ubuntu to load when I switch to onboard video, it loads when on PCIe primary adapter. However can't get that GPU to mine that way.
I am getting the DAG pre-allocation error, however it still starts mining, how is that possible?
For some reason I can't get Ubuntu to load when I switch to onboard video, it loads when on PCIe primary adapter. However can't get that GPU to mine that way.
I am getting the DAG pre-allocation error, however it still starts mining, how is that possible?
August 14, 2020, 01:26:15 AM
So, with -straps 2 on my 1080ti, I get around 48 mh/s on the MINER, but the reported hashrate on the pool (2miners) is only 35 mh/s
On average hashrate on the pool, 35mh/s too
So it does not work well ?
On average hashrate on the pool, 35mh/s too
So it does not work well ?
How you managed to run the miner with -straps 2. When I try to use it it give me an error message?
Launch bat file from CMD in administrator mode
Already tried that, but it gives me an error that phoenixminer.exe is not a recognised command.
August 14, 2020, 01:19:48 AM
something annoyed me ,
https://imgur.com/a/WwaeUa1
never start mining until i restart my machine , how you run 10 days without dc ?
my vmemory is 200000 ,200gb
now increased to 400gb , i hate this message do i need to downgrade to PhoenixMiner 4.9 ?
could not connect to ethash pool ssl://eu1.ethermine.org:5555 . An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full
could not connect to ethash pool ssl://asia1.ethermine.org:5555 . An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full
https://imgur.com/a/WwaeUa1
never start mining until i restart my machine , how you run 10 days without dc ?
my vmemory is 200000 ,200gb
now increased to 400gb , i hate this message do i need to downgrade to PhoenixMiner 4.9 ?
could not connect to ethash pool ssl://eu1.ethermine.org:5555 . An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full
could not connect to ethash pool ssl://asia1.ethermine.org:5555 . An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full
You need to increase OS VMEM size to 2Tb , sure will help
just kidding your issues are not bkz of OS virt mem size. I suppose you need to IPS schema , like check USB 4g dongle, ore share internet on our smarthpone with USB wifi dongle. Maybe netwok interface of MB makes these issues.Best regards.
August 13, 2020, 11:42:30 PM
Hello,
One of my rig (570 4gb) already running smooth for 10 days. But today suddenly GPU 1 become 3 mh/s from 29 mh/s. And the system is unstable, after 10 minutes alywas hangs.
I already reinstalled the driver, set the virtual memory to 200000. Nothing changed, GPU 1 still 3 mh/s.
Any clue about my rig problems?
thank you
You need Windows 10 + drivers 20.4.2.One of my rig (570 4gb) already running smooth for 10 days. But today suddenly GPU 1 become 3 mh/s from 29 mh/s. And the system is unstable, after 10 minutes alywas hangs.
I already reinstalled the driver, set the virtual memory to 200000. Nothing changed, GPU 1 still 3 mh/s.
Any clue about my rig problems?
thank you
Already use win 10 & drivers 20.4.2.
But still got the same problems.
In AMD Radeon software put GPU 1 to compute and restart the rig. I tried it and it worked
Already set this. Nothing changed, still same.
August 13, 2020, 06:33:02 PM
Hello,
One of my rig (570 4gb) already running smooth for 10 days. But today suddenly GPU 1 become 3 mh/s from 29 mh/s. And the system is unstable, after 10 minutes alywas hangs.
I already reinstalled the driver, set the virtual memory to 200000. Nothing changed, GPU 1 still 3 mh/s.
Any clue about my rig problems?
thank you
You need Windows 10 + drivers 20.4.2.One of my rig (570 4gb) already running smooth for 10 days. But today suddenly GPU 1 become 3 mh/s from 29 mh/s. And the system is unstable, after 10 minutes alywas hangs.
I already reinstalled the driver, set the virtual memory to 200000. Nothing changed, GPU 1 still 3 mh/s.
Any clue about my rig problems?
thank you
Already use win 10 & drivers 20.4.2.
But still got the same problems.
In AMD Radeon software put GPU 1 to compute and restart the rig. I tried it and it worked
Already set this. Nothing changed, still same.
August 13, 2020, 05:49:17 PM
Hi,
trying to have Phoenix working on my RXs 4GB. I'm facing 2 problems.
It's a W10 8 gpus rig, 4Gb RAM, 32GB virtual memory, drivers just updated to 20.4.2
Running more than 5 gpus gives a fatal error.
-gpus 12345 works
-gpus 23456 works
-gpus 123456 fatal error, nothing more in log
-mt 1 and -mt 2 have no effect. Gpus are bios flashed, is it for that ?
Parameters used : -mt 1 -gt 46 -gpus 12345 -amd -acm
trying to have Phoenix working on my RXs 4GB. I'm facing 2 problems.
It's a W10 8 gpus rig, 4Gb RAM, 32GB virtual memory, drivers just updated to 20.4.2
Running more than 5 gpus gives a fatal error.
-gpus 12345 works
-gpus 23456 works
-gpus 123456 fatal error, nothing more in log
-mt 1 and -mt 2 have no effect. Gpus are bios flashed, is it for that ?
Parameters used : -mt 1 -gt 46 -gpus 12345 -amd -acm
August 13, 2020, 05:48:38 PM
Hi
I moved to PhoenixMiner from Claymore to be able to mine ETH a few more months with my RX580 4GB cards. I understand there is no -strap or -rxboost option for AMD cards. Do you guys use a seperate tool to apply straps or did you flash the cards?
The straps provided by Claymore was a bit better than the timings that I flashed to the cards. Win 10
I moved to PhoenixMiner from Claymore to be able to mine ETH a few more months with my RX580 4GB cards. I understand there is no -strap or -rxboost option for AMD cards. Do you guys use a seperate tool to apply straps or did you flash the cards?
The straps provided by Claymore was a bit better than the timings that I flashed to the cards. Win 10
August 13, 2020, 01:00:03 PM
Hello,
One of my rig (570 4gb) already running smooth for 10 days. But today suddenly GPU 1 become 3 mh/s from 29 mh/s. And the system is unstable, after 10 minutes alywas hangs.
I already reinstalled the driver, set the virtual memory to 200000. Nothing changed, GPU 1 still 3 mh/s.
Any clue about my rig problems?
thank you
You need Windows 10 + drivers 20.4.2.One of my rig (570 4gb) already running smooth for 10 days. But today suddenly GPU 1 become 3 mh/s from 29 mh/s. And the system is unstable, after 10 minutes alywas hangs.
I already reinstalled the driver, set the virtual memory to 200000. Nothing changed, GPU 1 still 3 mh/s.
Any clue about my rig problems?
thank you
Already use win 10 & drivers 20.4.2.
But still got the same problems.
In AMD Radeon software put GPU 1 to compute and restart the rig. I tried it and it worked
August 13, 2020, 12:37:01 PM
I keep getting these errors on my GTX 980 Ti, anybody knows why?
2020.08.13:20:33:56.505: GPU1 CUDA error in CudaProgram.cu:456 : the launch timed out and was terminated (702)
2020.08.13:20:33:56.505: GPU1 GPU1 search error: the launch timed out and was terminated
2020.08.13:20:33:56.951: wdog Thread(s) not responding. Restarting.
Edit:
Sometimes, instead of the errors above, I get these errors:
2020.08.13:23:22:12.188: GPU1 CUDA error in CudaProgram.cu:456 : unknown error (999)
2020.08.13:23:22:12.188: GPU1 GPU1 search error: unknown error
2020.08.13:23:22:12.188: wdog Fatal error detected. Restarting.
Really weird...
2020.08.13:20:33:56.505: GPU1 CUDA error in CudaProgram.cu:456 : the launch timed out and was terminated (702)
2020.08.13:20:33:56.505: GPU1 GPU1 search error: the launch timed out and was terminated
2020.08.13:20:33:56.951: wdog Thread(s) not responding. Restarting.
Edit:
Sometimes, instead of the errors above, I get these errors:
2020.08.13:23:22:12.188: GPU1 CUDA error in CudaProgram.cu:456 : unknown error (999)
2020.08.13:23:22:12.188: GPU1 GPU1 search error: unknown error
2020.08.13:23:22:12.188: wdog Fatal error detected. Restarting.
Really weird...
August 13, 2020, 11:57:26 AM
Hello,
One of my rig (570 4gb) already running smooth for 10 days. But today suddenly GPU 1 become 3 mh/s from 29 mh/s. And the system is unstable, after 10 minutes alywas hangs.
I already reinstalled the driver, set the virtual memory to 200000. Nothing changed, GPU 1 still 3 mh/s.
Any clue about my rig problems?
thank you
You need Windows 10 + drivers 20.4.2.One of my rig (570 4gb) already running smooth for 10 days. But today suddenly GPU 1 become 3 mh/s from 29 mh/s. And the system is unstable, after 10 minutes alywas hangs.
I already reinstalled the driver, set the virtual memory to 200000. Nothing changed, GPU 1 still 3 mh/s.
Any clue about my rig problems?
thank you
Already use win 10 & drivers 20.4.2.
But still got the same problems.
August 13, 2020, 11:30:27 AM
Hello,
One of my rig (570 4gb) already running smooth for 10 days. But today suddenly GPU 1 become 3 mh/s from 29 mh/s. And the system is unstable, after 10 minutes alywas hangs.
I already reinstalled the driver, set the virtual memory to 200000. Nothing changed, GPU 1 still 3 mh/s.
Any clue about my rig problems?
thank you
You need Windows 10 + drivers 20.4.2.One of my rig (570 4gb) already running smooth for 10 days. But today suddenly GPU 1 become 3 mh/s from 29 mh/s. And the system is unstable, after 10 minutes alywas hangs.
I already reinstalled the driver, set the virtual memory to 200000. Nothing changed, GPU 1 still 3 mh/s.
Any clue about my rig problems?
thank you
Already use win 10 & drivers 20.4.2.
But still got the same problems.
August 13, 2020, 11:19:43 AM
Hello,
One of my rig (570 4gb) already running smooth for 10 days. But today suddenly GPU 1 become 3 mh/s from 29 mh/s. And the system is unstable, after 10 minutes alywas hangs.
I already reinstalled the driver, set the virtual memory to 200000. Nothing changed, GPU 1 still 3 mh/s.
Any clue about my rig problems?
thank you
You need Windows 10 + drivers 20.4.2. One of my rig (570 4gb) already running smooth for 10 days. But today suddenly GPU 1 become 3 mh/s from 29 mh/s. And the system is unstable, after 10 minutes alywas hangs.
I already reinstalled the driver, set the virtual memory to 200000. Nothing changed, GPU 1 still 3 mh/s.
Any clue about my rig problems?
thank you
August 13, 2020, 11:15:20 AM
something annoyed me ,
https://imgur.com/a/WwaeUa1
never start mining until i restart my machine , how you run 10 days without dc ?
my vmemory is 200000 ,200gb
now increased to 400gb , i hate this message do i need to downgrade to PhoenixMiner 4.9 ?
could not connect to ethash pool ssl://eu1.ethermine.org:5555 . An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full
could not connect to ethash pool ssl://asia1.ethermine.org:5555 . An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full
https://imgur.com/a/WwaeUa1
never start mining until i restart my machine , how you run 10 days without dc ?
my vmemory is 200000 ,200gb
now increased to 400gb , i hate this message do i need to downgrade to PhoenixMiner 4.9 ?
could not connect to ethash pool ssl://eu1.ethermine.org:5555 . An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full
could not connect to ethash pool ssl://asia1.ethermine.org:5555 . An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full
August 13, 2020, 11:12:36 AM
Hello,
One of my rig (570 4gb) already running smooth for 10 days. But today suddenly GPU 1 become 3 mh/s from 29 mh/s. And the system is unstable, after 10 minutes alywas hangs.
I already reinstalled the driver, set the virtual memory to 200000. Nothing changed, GPU 1 still 3 mh/s.
Any clue about my rig problems?
thank you
One of my rig (570 4gb) already running smooth for 10 days. But today suddenly GPU 1 become 3 mh/s from 29 mh/s. And the system is unstable, after 10 minutes alywas hangs.
I already reinstalled the driver, set the virtual memory to 200000. Nothing changed, GPU 1 still 3 mh/s.
Any clue about my rig problems?
thank you
Jump to: