PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 246.

Binary100100

member

Activity: 180

Merit: 10

Quote from: dvz35 on August 20, 2020, 12:42:55 PM

Quote from: alucard20724 on August 20, 2020, 11:48:35 AM

Quote from: dvz35 on August 20, 2020, 10:19:54 AM

Quote from: jasta more on August 20, 2020, 09:55:48 AM

What better indicator for bull run we need then scammers coming back with malware/trojan links Grin

checked! no viruses! there are more than a hundred configured bat files for various pools. this is very convenient.

yes... cause looking at your past post... you definitely have the credibility Roll Eyes

this has already been written above. this is really a virus-free miner. it's just a way to increase traffic to the site, that's all.

Or the dev fee address was changed in the source.
I wonder what virus that would be flagged as?

How about just stop "mirroring" and leaving it to the developers please?

dvz35

jr. member

Activity: 57

Merit: 3

Quote from: alucard20724 on August 20, 2020, 11:48:35 AM

Quote from: dvz35 on August 20, 2020, 10:19:54 AM

Quote from: jasta more on August 20, 2020, 09:55:48 AM

What better indicator for bull run we need then scammers coming back with malware/trojan links Grin

checked! no viruses! there are more than a hundred configured bat files for various pools. this is very convenient.

yes... cause looking at your past post... you definitely have the credibility Roll Eyes

this has already been written above. this is really a virus-free miner. it's just a way to increase traffic to the site, that's all.

alucard20724

sr. member

Activity: 703

Merit: 272

Quote from: dvz35 on August 20, 2020, 10:19:54 AM

Quote from: jasta more on August 20, 2020, 09:55:48 AM

What better indicator for bull run we need then scammers coming back with malware/trojan links Grin

checked! no viruses! there are more than a hundred configured bat files for various pools. this is very convenient.

yes... cause looking at your past post... you definitely have the credibility Roll Eyes

dvz35

jr. member

Activity: 57

Merit: 3

Quote from: jasta more on August 20, 2020, 09:55:48 AM

What better indicator for bull run we need then scammers coming back with malware/trojan links Grin

checked! no viruses! there are more than a hundred configured bat files for various pools. this is very convenient.

P00P135

full member

Activity: 1123

Merit: 136

Quote from: ?? on ??

configured miner V. 5.1c

Imagine downloading a miner from an untrusted source. What could possibly go wrong. Roll Eyes

jasta more

member

Activity: 224

Merit: 18

What better indicator for bull run we need then scammers coming back with malware/trojan links Grin

arierep60

newbie

Activity: 50

Merit: 0

when a update to work with latest amd drivers on latest hiveOS beta image?
thanks

cscheat

newbie

Activity: 84

Merit: 0

Quote from: bigfootnz on August 19, 2020, 09:01:37 PM

Quote from: bigfootnz on August 19, 2020, 05:42:42 AM

Hi, I'm having problem on one my rig with 5 GTX 1070/1070Ti and PhoenixMiner v5.1c. Rig is crashing every time while DAG file is created. On other rigs with 4 GPU I do not have problems with Rigs crashing. Also Clay is working without problem on this rig with 5GPUs. I would like to use PhoenixMiner but I do not know what is the problem. Also I've tried few nVidia drivers no difference. This Rig was off for last year and I've started back mining few days ago. Does someone have idea what could be problem with this Rig? Thanks

Just quick update, in my case problem was faulty riser card. After replacing with new one PhoenixMiner is working just fine. But only what is really confusing how Clay was working with faulty riser when PhoenixMiner didn't want even to start.

i notice claymore using less power

bigfootnz

newbie

Activity: 25

Merit: 0

Quote from: bigfootnz on August 19, 2020, 05:42:42 AM

Hi, I'm having problem on one my rig with 5 GTX 1070/1070Ti and PhoenixMiner v5.1c. Rig is crashing every time while DAG file is created. On other rigs with 4 GPU I do not have problems with Rigs crashing. Also Clay is working without problem on this rig with 5GPUs. I would like to use PhoenixMiner but I do not know what is the problem. Also I've tried few nVidia drivers no difference. This Rig was off for last year and I've started back mining few days ago. Does someone have idea what could be problem with this Rig? Thanks

Just quick update, in my case problem was faulty riser card. After replacing with new one PhoenixMiner is working just fine. But only what is really confusing how Clay was working with faulty riser when PhoenixMiner didn't want even to start.

john1010

hero member

Activity: 2086

Merit: 562

Quote from: cscheat on August 19, 2020, 08:35:29 AM

Quote from: UnclWish on August 18, 2020, 11:10:50 AM

AMD released 20.8.2 driver. I checked it - PM support it. OpenCL still from 20.7.1.
So 20.8.2 can be installed without any difference with 20.7.1 drivers.

i would stick to 20.4.2 drivers for a while.. (very very very stable)

I tried different Radeon driver version for Phoenix 5.0e for my RX 570 4G but non of them are compatible, they've give my rig an error, as of now the 20.4.2 version is very stable for my cards, I already tried the old blockchain driver and it's the same, it gives an error and crash to my rig.

temporalminer

newbie

Activity: 12

Merit: 0

Quote from: SpeedY_Hun on August 18, 2020, 01:46:40 PM

Quote from: temporalminer on August 17, 2020, 10:37:21 AM

How to use the commands -straps, -vmt1, -vmt2, -vmt3, and -vmr on 1080Ti? I tried -nvmem 2 and the commands still are not recognized.

The miner is not recognizing the commands when I put in the bat file

I have the same problem too :/

Can anyone assist us please Embarrassed

cscheat

newbie

Activity: 84

Merit: 0

Quote from: UnclWish on August 18, 2020, 11:10:50 AM

AMD released 20.8.2 driver. I checked it - PM support it. OpenCL still from 20.7.1.
So 20.8.2 can be installed without any difference with 20.7.1 drivers.

i would stick to 20.4.2 drivers for a while.. (very very very stable)

astark052970

newbie

Activity: 7

Merit: 0

Quote from: bigfootnz on August 19, 2020, 05:42:42 AM

Hi, I'm having problem on one my rig with 5 GTX 1070/1070Ti and PhoenixMiner v5.1c. Rig is crashing every time while DAG file is created. On other rigs with 4 GPU I do not have problems with Rigs crashing. Also Clay is working without problem on this rig with 5GPUs. I would like to use PhoenixMiner but I do not know what is the problem. Also I've tried few nVidia drivers no difference. This Rig was off for last year and I've started back mining few days ago. Does someone have idea what could be problem with this Rig? Thanks

Came here looking for info on this. I'm having the same issue. I'm using 5700XTs, 20.4.2 drivers, and 5.1c. Things work fine at first then it will crash when creating the DAG file. This started after switching to 5.1c. I was using 4.9c before so I'm going to go back to that for now and make sure that still works.

bigfootnz

newbie

Activity: 25

Merit: 0

Hi, I'm having problem on one my rig with 5 GTX 1070/1070Ti and PhoenixMiner v5.1c. Rig is crashing every time while DAG file is created. On other rigs with 4 GPU I do not have problems with Rigs crashing. Also Clay is working without problem on this rig with 5GPUs. I would like to use PhoenixMiner but I do not know what is the problem. Also I've tried few nVidia drivers no difference. This Rig was off for last year and I've started back mining few days ago. Does someone have idea what could be problem with this Rig? Thanks

john1010

hero member

Activity: 2086

Merit: 562

Quote from: Guigs321 on August 19, 2020, 02:41:13 AM

Quote from: john1010 on August 19, 2020, 12:25:52 AM

I don't think if my command line was correct, I see some improvement in hashrate but my 4 ramaining cards never get the increase like other card got, Im using same brand of rx 570 4gb..

my command line:

PhoenixMiner.exe -pool asia1.ethermine.org:4444 -pool2 asia1.ethermine.org:14444 -wal 0xa465*****E6F45d49ce57E************4.john1010007 -mt 2 -amd -tt 60,55,60,55,55,60,60,60,60,60,60,60 -eres 2 -wdog 1 -proto 2 -powlim -10,-10,-10,-10,-10,-10,-10,-10,-10,-10,-10,-10 -gt 45,28,45,45,45,45,45,45,45,45,45,45 -fanmin 70,70,70,70,70,70,70,70,70,70,70,70 -rmode 1 -gpureset 1

result:

main Eth speed: 327.666 MH/s, shares: 111/0/0, time: 0:22
2020.08.19:07:33:49.251: main GPUs: 1: 27.058 MH/s (11) 2: 27.933 MH/s (2) 3: 27.895 MH/s (9) 4: 25.981 MH/s (11) 5: 25.643 MH/s ( Cool

6: 27.895 MH/s (7) 7: 25.973 MH/s (14) 8: 27.896 MH/s (10) 9: 27.899 MH/s (12) 10: 27.897 MH/s (13) 11: 27.892 MH/s (7) 12: 27.704 MH/s (7)

You don't nedd to put 12 times the same parameter if it's the same for your 12 cards.

What are your clocks? for the same GPU I have :
- 30,8 Mh/s 1150/2060 @875mV with 30 in REF parameter in AMDTweakXL. (Samsung Memory)
- 29,9 Mh/s 1110/2000 @875mV with 30 in REF parameter in AMDTweakXL. (Hynix Memory)

Yeah your right but this command line seems works a little for me and my cards are different moded bios, for example 10 of them are ASUS strix and they've got same moded bios, while the other was MSI and they have also a different moded bios, that's why Im' experimenting the command line... But thanks anyway for you reply, my ASUS are elpida and i don't know what the MSI is.

Guigs321

newbie

Activity: 41

Merit: 0

Quote from: john1010 on August 19, 2020, 12:25:52 AM

I don't think if my command line was correct, I see some improvement in hashrate but my 4 ramaining cards never get the increase like other card got, Im using same brand of rx 570 4gb..

my command line:

PhoenixMiner.exe -pool asia1.ethermine.org:4444 -pool2 asia1.ethermine.org:14444 -wal 0xa465*****E6F45d49ce57E************4.john1010007 -mt 2 -amd -tt 60,55,60,55,55,60,60,60,60,60,60,60 -eres 2 -wdog 1 -proto 2 -powlim -10,-10,-10,-10,-10,-10,-10,-10,-10,-10,-10,-10 -gt 45,28,45,45,45,45,45,45,45,45,45,45 -fanmin 70,70,70,70,70,70,70,70,70,70,70,70 -rmode 1 -gpureset 1

result:

main Eth speed: 327.666 MH/s, shares: 111/0/0, time: 0:22
2020.08.19:07:33:49.251: main GPUs: 1: 27.058 MH/s (11) 2: 27.933 MH/s (2) 3: 27.895 MH/s (9) 4: 25.981 MH/s (11) 5: 25.643 MH/s ( Cool

6: 27.895 MH/s (7) 7: 25.973 MH/s (14) 8: 27.896 MH/s (10) 9: 27.899 MH/s (12) 10: 27.897 MH/s (13) 11: 27.892 MH/s (7) 12: 27.704 MH/s (7)

You don't nedd to put 12 times the same parameter if it's the same for your 12 cards.

What are your clocks? for the same GPU I have :
- 30,8 Mh/s 1150/2060 @875mV with 30 in REF parameter in AMDTweakXL. (Samsung Memory)
- 29,9 Mh/s 1110/2000 @875mV with 30 in REF parameter in AMDTweakXL. (Hynix Memory)

john1010

hero member

Activity: 2086

Merit: 562

I don't think if my command line was correct, I see some improvement in hashrate but my 4 ramaining cards never get the increase like other card got, Im using same brand of rx 570 4gb..

my command line:

PhoenixMiner.exe -pool asia1.ethermine.org:4444 -pool2 asia1.ethermine.org:14444 -wal 0xa465*****E6F45d49ce57E************4.john1010007 -mt 2 -amd -tt 60,55,60,55,55,60,60,60,60,60,60,60 -eres 2 -wdog 1 -proto 2 -powlim -10,-10,-10,-10,-10,-10,-10,-10,-10,-10,-10,-10 -gt 45,28,45,45,45,45,45,45,45,45,45,45 -fanmin 70,70,70,70,70,70,70,70,70,70,70,70 -rmode 1 -gpureset 1

result:

main Eth speed: 327.666 MH/s, shares: 111/0/0, time: 0:22
2020.08.19:07:33:49.251: main GPUs: 1: 27.058 MH/s (11) 2: 27.933 MH/s (2) 3: 27.895 MH/s (9) 4: 25.981 MH/s (11) 5: 25.643 MH/s ( Cool

6: 27.895 MH/s (7) 7: 25.973 MH/s (14) 8: 27.896 MH/s (10) 9: 27.899 MH/s (12) 10: 27.897 MH/s (13) 11: 27.892 MH/s (7) 12: 27.704 MH/s (7)

AzzAz

legendary

Activity: 1030

Merit: 1006

Quote from: samfei on August 18, 2020, 06:41:15 AM

Quote from: UnclWish on August 18, 2020, 05:57:19 AM

Quote from: samfei on August 18, 2020, 05:53:39 AM

Quote from: UnclWish on August 18, 2020, 04:06:22 AM

Quote from: samfei on August 18, 2020, 03:39:36 AM

My 1st GPU not connected to monitor.

GPU 1
https://prnt.sc/u1ftfd

Other GPU
https://prnt.sc/u1fuxz

GPU-Z shows that on 1st GPU 215+Mb videomemory is in use... That's why it's not enough to mine eth.

In ports of 1st GPU inserted something? If you use igpu Windows didn't use other GPU memory... Something wrong here...

nothing inserted at gpu 1 and already set igpu enable in bios. Huh

Don't know than what's wrong with your comp... Try to search info about your motherboard... Maybe it's need to update mobo bios...
Try to delete AMD drivers via DDU and install again.

Ok, will try again. Thanks bro Grin

I think it is something due to windows updates. I solved it by updating all ( 19.03, with 365 days delay on feature updates )and reinstalling video driver ( DDU...than 20.4.2). Maybe reinstall windows if that don't help

scryptr

legendary

Activity: 1797

Merit: 1028

LINUX AMD 20.30 DRIVERS ARE OUT--

These are the latest, and only the second, driver release for Ubuntu 20.04 Long Term Release. They install like butter on toast and my 5700XT cards do 53MH/s with no tuning when using PhoenixMiner 5.1c.

However, I get a lot of stales and rejects, and the clock commands and voltage commands do not work. Compared to AMD 20.10, the drivers are fine. I could not install 20.10, they were not designed for 20.04 LTS. If I hacked the the install in order to squeeze the drivers in place, I got only 5-6MH/s per 5700XT. PhoenixMiner is currently optimized for AMD 20.10.

Please tune PhoenixMiner for AMD 20.30, it is the current and best release for Ubuntu 20.04 LTS. My 5700XT cards will do 53MH/s with half the wattage on a commercial mining OS, but I like to set a rig up from scratch.

Thanks for your work, my miners send their dues 24/7. --scryptr

xeridea

sr. member

Activity: 449

Merit: 251

Quote from: AzzAz on August 18, 2020, 08:50:56 AM

Quote from: WhyMe on August 13, 2020, 06:49:17 PM

Hi,
trying to have Phoenix working on my RXs 4GB. I'm facing 2 problems.
It's a W10 8 gpus rig, 4Gb RAM, 32GB virtual memory, drivers just updated to 20.4.2

Running more than 5 gpus gives a fatal error.
-gpus 12345 works
-gpus 23456 works
-gpus 123456 fatal error, nothing more in log

-mt 1 and -mt 2 have no effect. Gpus are bios flashed, is it for that ?

Parameters used : -mt 1 -gt 46 -gpus 12345 -amd -acm

32G is not enough. Try 42 for example...

All memory allocated on GPU needs addressed in Windows, if DAG is almost 4GB, needs 4x8GB + more for good measure...

Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 246. (Read 784857 times)