Author

Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 253. (Read 784857 times)

sr. member
Activity: 2142
Merit: 353
Xtreme Monster
I think tstop stops the mining of whatever card hits that temp and then -tstart restarts at whatever setpoint you pick (of course a lower temp than 75) but I don't want the card to stop all together, I just want it to throttle, lower the hashrate... or maybe it just averages out, I don't know.

Thank you though!

Have you tried to lower the core voltage even more to lower the heat?
newbie
Activity: 8
Merit: 0
So it's hot... and I'm trying to have phoenixminer throttle my card once a certain temperature is hit. What combination of commands do I use to say throttle if my GPU temp gets to 77C? I'm not sure how -tt or -tmax work. -ttli doesn't work for me. thank you!

I think is -tstop 75, -tmax will stop and exit.

I think tstop stops the mining of whatever card hits that temp and then -tstart restarts at whatever setpoint you pick (of course a lower temp than 75) but I don't want the card to stop all together, I just want it to throttle, lower the hashrate... or maybe it just averages out, I don't know.

Thank you though!
sr. member
Activity: 2142
Merit: 353
Xtreme Monster
So it's hot... and I'm trying to have phoenixminer throttle my card once a certain temperature is hit. What combination of commands do I use to say throttle if my GPU temp gets to 77C? I'm not sure how -tt or -tmax work. -ttli doesn't work for me. thank you!

I think is -tstop 75, -tmax will stop and exit.
newbie
Activity: 8
Merit: 0
So it's hot... and I'm trying to have phoenixminer throttle my card once a certain temperature is hit. What combination of commands do I use to say throttle if my GPU temp gets to 77C? I'm not sure how -tt or -tmax work. -ttli doesn't work for me. thank you!
sr. member
Activity: 1484
Merit: 253
30 to 31 for me anyways
depending what memory you have

My AMD RX 580 card only provides a hash rate of 10 Mh/s. It is a brand new card. Why is it slow ?
Change your card from graphic to compute mode.!!!

I used the command line option -acm, which turns on AMD compute mode.

My computer:

OS:                           Windows 7 64-bit edition
Graphic card:             XFX AMD Radeon RX580 GTS XXX Edition
graphic card driver:    Adrenalin 2020 Edition 20.8.1

GPU_Caps_Viewer reports:

  - Name: AMD Radeon RX 580
  - GPU codename: Polaris 20
  - Device ID: 1002-67DF
  - Subdevice ID: 1682-C580
  - Revision ID:   E7
  - Driver: Adrenalin 2020 20.8.1 (27.20.2001.13001)
  - Bus Id: 7
  - Shader cores: 2304
  - Texture units: 144
  - ROP units: 32
  - TDP: 185W
  - BIOS version: 015.050.002.001/113-58085SSD2-M80 (2019/08/20 02:23)
  - Memory size: 8192MB
  - Memory type: GDDR5
  - Memory bus width: 0-bit
  - GPU clock: 300 MHz, memory: 300 MHz, VDDC: 0.750V
  - GPU clock: 600 MHz, memory: 1000 MHz, VDDC: 0.769V
  - GPU clock: 900 MHz, memory: 2120 MHz, VDDC: 0.881V
  - GPU clock: 1020 MHz, memory: 2120 MHz, VDDC: 0.975V
  - GPU clock: 1040 MHz, memory: 2120 MHz, VDDC: 0.987V
  - GPU clock: 1060 MHz, memory: 2120 MHz, VDDC: 1.006V
  - GPU clock: 1080 MHz, memory: 2120 MHz, VDDC: 1.025V
  - GPU clock: 1110 MHz, memory: 2120 MHz, VDDC: 1.043V
  - Radeon PowerTune info:
    - GPU power limit: 120 % TDP
    - GPU power min: 50 % TDP
    - GPU power max: 150 % TDP

Please help me !!

Windows 7 didn't have possibility to change card mode to compute. The only way is to use Windows 10.
newbie
Activity: 35
Merit: 0
hi
how minig Algorithm: KAWPOW ?

How to Start Mining Ravencoin ?

What kind of videocards do you have? Try to use Nbminer instead of Phoenixminer.

https://bitcointalksearch.org/topic/nbminer-v422-100-lhr-unlock-for-eth-mining-5099379
newbie
Activity: 35
Merit: 0
30 to 31 for me anyways
depending what memory you have

My AMD RX 580 card only provides a hash rate of 10 Mh/s. It is a brand new card. Why is it slow ?

Switch Compute mode ON.
newbie
Activity: 6
Merit: 0
hi
how minig Algorithm: KAWPOW ?

How to Start Mining Ravencoin ?
member
Activity: 220
Merit: 12
30 to 31 for me anyways
depending what memory you have

My AMD RX 580 card only provides a hash rate of 10 Mh/s. It is a brand new card. Why is it slow ?
Change your card from graphic to compute mode.!!!

I used the command line option -acm, which turns on AMD compute mode.

My computer:

OS:                           Windows 7 64-bit edition
Graphic card:             XFX AMD Radeon RX580 GTS XXX Edition
graphic card driver:    Adrenalin 2020 Edition 20.8.1

GPU_Caps_Viewer reports:

  - Name: AMD Radeon RX 580
  - GPU codename: Polaris 20
  - Device ID: 1002-67DF
  - Subdevice ID: 1682-C580
  - Revision ID:   E7
  - Driver: Adrenalin 2020 20.8.1 (27.20.2001.13001)
  - Bus Id: 7
  - Shader cores: 2304
  - Texture units: 144
  - ROP units: 32
  - TDP: 185W
  - BIOS version: 015.050.002.001/113-58085SSD2-M80 (2019/08/20 02:23)
  - Memory size: 8192MB
  - Memory type: GDDR5
  - Memory bus width: 0-bit
  - GPU clock: 300 MHz, memory: 300 MHz, VDDC: 0.750V
  - GPU clock: 600 MHz, memory: 1000 MHz, VDDC: 0.769V
  - GPU clock: 900 MHz, memory: 2120 MHz, VDDC: 0.881V
  - GPU clock: 1020 MHz, memory: 2120 MHz, VDDC: 0.975V
  - GPU clock: 1040 MHz, memory: 2120 MHz, VDDC: 0.987V
  - GPU clock: 1060 MHz, memory: 2120 MHz, VDDC: 1.006V
  - GPU clock: 1080 MHz, memory: 2120 MHz, VDDC: 1.025V
  - GPU clock: 1110 MHz, memory: 2120 MHz, VDDC: 1.043V
  - Radeon PowerTune info:
    - GPU power limit: 120 % TDP
    - GPU power min: 50 % TDP
    - GPU power max: 150 % TDP

Please help me !!

It doesn't work under Win7. Install Win10 or Linux. No other way.
member
Activity: 180
Merit: 10
ETHpillan - a new tablet to increase the hashrate on video cards from AMD and NVIDIA
Support all miners for Wondows (AMD+Nvidia)
Hashrate
1080ti - 55 mh/s
2080ti - 58 mh/s
RX5700 XT - 65 mh/s

More info: https://github.com/ethpillandev/ETHpillAN/releases/tag/v1.1.0

Just stop already. Nobody is that stupid.
newbie
Activity: 3
Merit: 0
30 to 31 for me anyways
depending what memory you have

My AMD RX 580 card only provides a hash rate of 10 Mh/s. It is a brand new card. Why is it slow ?
Change your card from graphic to compute mode.!!!

I used the command line option -acm, which turns on AMD compute mode.

My computer:

OS:                           Windows 7 64-bit edition
Graphic card:             XFX AMD Radeon RX580 GTS XXX Edition
graphic card driver:    Adrenalin 2020 Edition 20.8.1

GPU_Caps_Viewer reports:

  - Name: AMD Radeon RX 580
  - GPU codename: Polaris 20
  - Device ID: 1002-67DF
  - Subdevice ID: 1682-C580
  - Revision ID:   E7
  - Driver: Adrenalin 2020 20.8.1 (27.20.2001.13001)
  - Bus Id: 7
  - Shader cores: 2304
  - Texture units: 144
  - ROP units: 32
  - TDP: 185W
  - BIOS version: 015.050.002.001/113-58085SSD2-M80 (2019/08/20 02:23)
  - Memory size: 8192MB
  - Memory type: GDDR5
  - Memory bus width: 0-bit
  - GPU clock: 300 MHz, memory: 300 MHz, VDDC: 0.750V
  - GPU clock: 600 MHz, memory: 1000 MHz, VDDC: 0.769V
  - GPU clock: 900 MHz, memory: 2120 MHz, VDDC: 0.881V
  - GPU clock: 1020 MHz, memory: 2120 MHz, VDDC: 0.975V
  - GPU clock: 1040 MHz, memory: 2120 MHz, VDDC: 0.987V
  - GPU clock: 1060 MHz, memory: 2120 MHz, VDDC: 1.006V
  - GPU clock: 1080 MHz, memory: 2120 MHz, VDDC: 1.025V
  - GPU clock: 1110 MHz, memory: 2120 MHz, VDDC: 1.043V
  - Radeon PowerTune info:
    - GPU power limit: 120 % TDP
    - GPU power min: 50 % TDP
    - GPU power max: 150 % TDP

Please help me !!
newbie
Activity: 14
Merit: 0
30 to 31 for me anyways
depending what memory you have

My AMD RX 580 card only provides a hash rate of 10 Mh/s. It is a brand new card. Why is it slow ?
Change your card from graphic to compute mode.!!!
sr. member
Activity: 1722
Merit: 261
Vave.com - Crypto Casino
30 to 31 for me anyways
depending what memory you have

My AMD RX 580 card only provides a hash rate of 10 Mh/s. It is a brand new card. Why is it slow ?
maybe you should study this section again and make good adjustments, it could be that you missed the information or didn't follow the tutorial, or it could be the memory you use
newbie
Activity: 3
Merit: 0
30 to 31 for me anyways
depending what memory you have

My AMD RX 580 card only provides a hash rate of 10 Mh/s. It is a brand new card. Why is it slow ?
jr. member
Activity: 124
Merit: 2
30 to 31 for me anyways
depending what memory you have
newbie
Activity: 3
Merit: 0
What hash rate does the AMD RX 580 provide for Ethereum using Phoenix Miner?
newbie
Activity: 296
Merit: 0
Hi Guys,

Today my claymore´s eth miner stop hashing for my 4gb cards. My vega and samsung 8gb worked good.
So i switched to PhoenixMiner to put all 4gb and 8gb cards working. All is hashing now.

I copyed the straps on the fly that claymore´s put on my vega using AMD memory tweak and the hashing is even better in PM.

Now i have some doubts: xD

1 - how i can switch pool to test it? i press "r" and the prompt say pool list have 3 pools. But can´t i switch manually, selecting what i want?

2 - On claymore i have the parameter -rxboost and for my rxs 580 i got 1mh/s more on claymore. Have PM something similar to that? or have to test some straps?

3 - Relatively to epoch duration i got this from initializing:

020.08.08:15:10:35.106: GPU2 GPU2: Free VRAM: 3.948 GB; used: 0.052 GB
2020.08.08:15:10:35.107: GPU2 GPU2: Allocating DAG (3.77) GB; good for epoch up to #355
2020.08.08:15:10:35.157: GPU2 GPU2: Generating DAG for epoch #353
2020.08.08:15:10:35.992: GPU3 GPU3: Free VRAM: 3.948 GB; used: 0.052 GB
2020.08.08:15:10:35.992: GPU3 GPU3: Allocating DAG (3.77) GB; good for epoch up to #355

3.1 - im seing that is only good for epoch 355? and we are on epoch 353. or can i expect that gpu will work until epoch have reached the 4gb of vram?

Thanks  Cool
1 - try to press "h" during mining - it's list of available commands. Maybe "e" change pool.

yes "e" worked Smiley

2 - PM didn't have -rxboost or it's analog. But -rxboost just sets the REF parameter. You can set it via AMD tweak tool with PM.

ah ok. Im seing too that my straps seems locked for rx580 in amdmemtweak, if i change it they reverse to original. On vega works

3 - "good for epoch up to..." is just showing up to what epoch miner taked videomemory in this session. It can be changed by option -eres. By default miner takes videomemory for current epoch + 2 epoch up.
Maximum epoch for 4Gb cards is up to 373 or above. But for this it's needed Windows 10 and good drivers like 20.4.2.

Nice, so  maybe will work a few more months Smiley

Thanks for great help Smiley
sr. member
Activity: 1484
Merit: 253
Hi Guys,

Today my claymore´s eth miner stop hashing for my 4gb cards. My vega and samsung 8gb worked good.
So i switched to PhoenixMiner to put all 4gb and 8gb cards working. All is hashing now.

I copyed the straps on the fly that claymore´s put on my vega using AMD memory tweak and the hashing is even better in PM.

Now i have some doubts: xD

1 - how i can switch pool to test it? i press "r" and the prompt say pool list have 3 pools. But can´t i switch manually, selecting what i want?

2 - On claymore i have the parameter -rxboost and for my rxs 580 i got 1mh/s more on claymore. Have PM something similar to that? or have to test some straps?

3 - Relatively to epoch duration i got this from initializing:

020.08.08:15:10:35.106: GPU2 GPU2: Free VRAM: 3.948 GB; used: 0.052 GB
2020.08.08:15:10:35.107: GPU2 GPU2: Allocating DAG (3.77) GB; good for epoch up to #355
2020.08.08:15:10:35.157: GPU2 GPU2: Generating DAG for epoch #353
2020.08.08:15:10:35.992: GPU3 GPU3: Free VRAM: 3.948 GB; used: 0.052 GB
2020.08.08:15:10:35.992: GPU3 GPU3: Allocating DAG (3.77) GB; good for epoch up to #355

3.1 - im seing that is only good for epoch 355? and we are on epoch 353. or can i expect that gpu will work until epoch have reached the 4gb of vram?

Thanks  Cool
1 - try to press "h" during mining - it's list of available commands. Maybe "e" change pool.

2 - PM didn't have -rxboost or it's analog. But -rxboost just sets the REF parameter. You can set it via AMD tweak tool with PM.

3 - "good for epoch up to..." is just showing up to what epoch miner taked videomemory in this session. It can be changed by option -eres. By default miner takes videomemory for current epoch + 2 epoch up.
Maximum epoch for 4Gb cards is up to 373 or above. But for this it's needed Windows 10 and good drivers like 20.4.2.
newbie
Activity: 33
Merit: 0
....
PM 5.1c? It can be a bug...
Card is 5700 XT?
1) yes. 2) 5700
in earlier versions, this "bug" also manifested itself
For me this bug never happend. I'm use miner already several years... Devfee always stops in time...

i use phönixminer since it started on 30 rigs and this bug never happened. Maybe you use a nodevfee program in background? than this can happen.
I have 10 rigs of different configurations, in mining since 2014. I answered above - it does not appear all the time, but the fact is on the face! I noticed when I carefully monitored the work of one of the rigs.

UP/
According to the observation results, it seems that this manifests itself (turns on) when the PM cannot connect to the first 1-2 pools for mining DevFee, then this mode is turned on and until it finds several shares, the devfee does not turn off. And this contradicts the stated development.
newbie
Activity: 33
Merit: 0
....
PM 5.1c? It can be a bug...
Card is 5700 XT?
1) yes. 2) 5700
in earlier versions, this "bug" also manifested itself
For me this bug never happend. I'm use miner already several years... Devfee always stops in time...
I have also been using this miner for several years, but this "bug" does not always appear, but periodically, which is why I used other miner programs, but now I decided to return, it turned out that this "problem" was not fixed.
Jump to: