Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 26. (Read 784985 times)
November 04, 2021, 10:46:44 AM
I heard nbminer inflates its results, I suggest you try some other too like t-rex and then compare.
November 03, 2021, 03:01:55 PM
Too bad about phoenixminer, I loved it.
tested with HiveOS:
Graphics cards: 3080TI
driver: 470.63.01
MEM: Micron GDDR6X
HiveOS: 0.6-211@211030
Driver: 470.63.01
Coin: ETH
OC: FAN: 100%, Core:1150, MEM: 2650, Power: 287,
Result:
phoenixminer-ver. 5.8c : 66.04 MH/s consumption: 228 W
The first few seconds the graphics card goes to 118MH/s
vs
nbminer 39.7 : 89.25 MH/s consumption 268 W
Unfortunately I lose too much so I have to stay with nbminer.
Is there any work being done on the LHR unlock ?
Thanks
tested with HiveOS:
Graphics cards: 3080TI
driver: 470.63.01
MEM: Micron GDDR6X
HiveOS: 0.6-211@211030
Driver: 470.63.01
Coin: ETH
OC: FAN: 100%, Core:1150, MEM: 2650, Power: 287,
Result:
phoenixminer-ver. 5.8c : 66.04 MH/s consumption: 228 W
The first few seconds the graphics card goes to 118MH/s
vs
nbminer 39.7 : 89.25 MH/s consumption 268 W
Unfortunately I lose too much so I have to stay with nbminer.
Is there any work being done on the LHR unlock ?
Thanks
November 03, 2021, 01:07:43 AM
I upgraded from old 5.2c miner (due to DAG size) to 5.8c and now miner even doesn't start ... any suggestions?
We use 388.71 drivers (also on other working machines).
2021.11.01:11:28:39.771: main Phoenix Miner 5.8c Windows/msvc - Release build
2021.11.01:11:28:39.771: main Cmd line:
2021.11.01:11:28:39.771: main config.txt: -nvidia -nvKernel 3 -mode 1 -gbase 0 -gser 1 -logfile debug.log -tt 62 -tstop 75 -tstart 60 -fanmin 50 -fanmax 100 -cclock +50 -mclock +450 -powlim -20 -straps 1
2021.11.01:11:28:40.307: main CUDA version: 9.0, CUDA runtime: 8.0
2021.11.01:11:28:40.314: main Available GPUs for mining:
2021.11.01:11:28:40.314: main GPU0: GeForce GTX 1070 (pcie 1), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU1: GeForce GTX 1070 (pcie 2), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU2: GeForce GTX 1070 (pcie 3), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU3: GeForce GTX 1070 (pcie 4), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU4: GeForce GTX 1070 (pcie 5), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU5: GeForce GTX 1070 (pcie 6), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU6: GeForce GTX 1070 (pcie
, CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU7: GeForce GTX 1070 (pcie 9), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
<--- exit without any info
Miner is started with following ENV :
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
Regards,
Stannicek
We use 388.71 drivers (also on other working machines).
2021.11.01:11:28:39.771: main Phoenix Miner 5.8c Windows/msvc - Release build
2021.11.01:11:28:39.771: main Cmd line:
2021.11.01:11:28:39.771: main config.txt: -nvidia -nvKernel 3 -mode 1 -gbase 0 -gser 1 -logfile debug.log -tt 62 -tstop 75 -tstart 60 -fanmin 50 -fanmax 100 -cclock +50 -mclock +450 -powlim -20 -straps 1
2021.11.01:11:28:40.307: main CUDA version: 9.0, CUDA runtime: 8.0
2021.11.01:11:28:40.314: main Available GPUs for mining:
2021.11.01:11:28:40.314: main GPU0: GeForce GTX 1070 (pcie 1), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU1: GeForce GTX 1070 (pcie 2), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU2: GeForce GTX 1070 (pcie 3), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU3: GeForce GTX 1070 (pcie 4), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU4: GeForce GTX 1070 (pcie 5), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU5: GeForce GTX 1070 (pcie 6), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU6: GeForce GTX 1070 (pcie
, CUDA cap. 6.1, 8 GB VRAM, 15 CUs2021.11.01:11:28:40.314: main GPU7: GeForce GTX 1070 (pcie 9), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
<--- exit without any info
Miner is started with following ENV :
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
Regards,
Stannicek
I have the same problem. Solved it by updating to 460.89. Yours are too old.
I ended up with NBMiner + MSI Afterburner (oldschool like 2017
) - no drivers reinstall - hashrate almost the same, but working. The reason behind that is windows not updated since install (Windows 10 Version 1703, 10.0.15063).I have P106 running in Windows 10 Home (21H1) with Nvidia driver version: 432.00 and no issues.
Code:
2021.11.02:21:14:34.527: main Phoenix Miner 5.8b Windows/msvc - Release build
2021.11.02:21:14:34.527: main Cmd line:
2021.11.02:21:14:34.527: main config.txt: -pool ssl://us2.ethermine.org:5555 -wal 0xWalet.workerb -cdm 0 -mode 1 -clgreen 1 -prate 0.11 -gbase 0 -wdog 1 -rmode 2 -log 1 -logfile Log*.log -logdir Logs -tt 65 -fanmin 50 -tstop 88 -tstart 65 -hstats 2 -fanstop 0 -vmt1 25 -vmt2 20 -vmt3 0 -vmr 16 -powlim -30 -cclock +150 -mclock +440
2021.11.02:21:14:34.613: main CUDA version: 10.0, CUDA runtime: 8.0
2021.11.02:21:14:34.800: main No OpenCL platforms found
2021.11.02:21:14:34.800: main Available GPUs for mining:
2021.11.02:21:14:34.800: main GPU0: P106-100 (pcie 1), CUDA cap. 6.1, 5.9 GB VRAM, 10 CUs
2021.11.02:21:14:34.802: main NVML library initialized
2021.11.02:21:14:34.820: main Nvidia driver version: 432.00
2021.11.02:21:14:34.822: main NVAPI error in NvapiWrapper.c:320 : -6
2021.11.02:21:14:35.383: main Eth: Loading pools from epools.txt
2021.11.02:21:14:35.394: main Eth: the pool list contains 7 pools (1 from command-line)
2021.11.02:21:14:35.394: main Eth: primary pool: ssl://us2.ethermine.org:5555
2021.11.02:21:14:35.394: main Starting GPU mining
2021.11.02:21:14:35.461: hwmc GPU0: set auto fan: 65C target temp (min fan 50%, max fan 100%)
2021.11.02:21:14:35.464: hwmc GPU0: Set power limit to 70%
2021.11.02:21:14:35.542: hwmc GPU0: set GPU clock delta to 150 MHz
2021.11.02:21:14:35.662: hwmc GPU0: set memory clock delta to 440 MHz
2021.11.02:21:14:35.726: wdog Starting watchdog thread
2021.11.02:21:14:40.972: GPU0 Light cache generated in 3.1 s (23.0 MB/s)
2021.11.02:21:14:41.021: GPU0 GPU0: Allocating DAG (4.54) GB; good for epoch up to #453
2021.11.02:21:14:41.024: GPU0 GPU0: Generating DAG for epoch #451
2021.11.02:21:14:41.187: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2021.11.02:21:14:42.353: eths Eth: Received:
2021.11.02:21:14:42.699: GPU0 GPU0: DAG 8%
2021.11.02:21:14:58.625: GPU0 GPU0: DAG generated in 17.6 s (263.2 MB/s)
2021.11.02:21:14:58.627: GPU0 GPU0: Using v3 Ethash CUDA kernels (P106-100)
2021.11.02:21:14:59.526: eths Eth: Received:
2021.11.02:21:15:01.676: main Eth speed: 21.747 MH/s, shares: 0/0/0, time: 0:00
2021.11.02:21:15:03.754: main GPU0: 52C 50% 84W
GPU0: cclock 1797 MHz, cvddc 881 mV, mclock 4449 MHz, Tj 60C, p-state P0, pcap no, 259 kH/J
GPUs power: 83.9 W; cost: 0.22 USD/day; 259 kH/J
2021.11.02:21:15:08.795: hwmc GPU0: set VRAM timings -vmt1 25 -vmt2 20 -vmt3 0
2021.11.02:21:15:08.795: hwmc GPU0: set VRAM refresh rate -vmr 16
2021.11.02:21:15:11.999: main Eth speed: 21.708 MH/s, shares: 0/0/0, time: 0:00
2021.11.02:21:15:32.265: main GPU0: 53C 50% 83W
GPU0: cclock 1771 MHz, cvddc 875 mV, mclock 4449 MHz, Tj 61C, p-state P0, pcap no, 261 kH/J
GPUs power: 83.1 W; cost: 0.22 USD/day; 261 kH/J
2021.11.02:21:15:32.673: main Eth speed: 21.707 MH/s, shares: 0/0/0, time: 0:00
2021.11.02:21:16:57.322: main GPU0: 55C 50% 84W
GPU0: cclock 1797 MHz, cvddc 881 mV, mclock 4449 MHz, Tj 63C, p-state P0, pcap power, 258 kH/J
GPUs power: 83.9 W; cost: 0.22 USD/day; 258 kH/J
2021.11.02:21:16:59.995: main Eth speed: 21.663 MH/s, shares: 0/0/0, time: 0:02
2021.11.02:21:17:28.740: GPU0 Eth: GPU0: ETH share found!
2021.11.02:21:17:28.740: eths Eth: Share actual difficulty: 6794 MH
2021.11.02:21:17:28.761: eths Eth: Received: {"id":4,"jsonrpc":"2.0","result":true}
2021.11.02:21:17:28.761: eths Eth: Share accepted in 21 ms
2021.11.02:21:17:30.823: main Eth speed: 21.655 MH/s, shares: 1/0/0, time: 0:02
2021.11.02:21:17:36.416: main
2021.11.02:21:17:36.416: main *** 0:03 *** 11/2 21:17 **************************************
2021.11.02:21:17:36.416: main Eth: Mining ETH on ssl://us2.ethermine.org:5555 for 0:03
2021.11.02:21:17:36.416: main Eth: Accepted shares 1 (0 stales), rejected shares 0 (0 stales)
2021.11.02:21:17:36.416: main Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
2021.11.02:21:17:36.416: main Eth: Maximum difficulty of found share: 6794 MH
2021.11.02:21:17:36.416: main Eth: Average speed (5 min): 21.678 MH/s
2021.11.02:21:17:36.416: main Eth: Effective speed: 23.73 MH/s; at pool: 23.73 MH/s
2021.11.02:21:17:36.416: main
I would suggest starting the miner from Command Prompt window. Sometimes errors that prevent miner from starting do not show up in the log file, but you can see them in this window.
November 02, 2021, 02:18:40 PM
I upgraded from old 5.2c miner (due to DAG size) to 5.8c and now miner even doesn't start ... any suggestions?
We use 388.71 drivers (also on other working machines).
2021.11.01:11:28:39.771: main Phoenix Miner 5.8c Windows/msvc - Release build
2021.11.01:11:28:39.771: main Cmd line:
2021.11.01:11:28:39.771: main config.txt: -nvidia -nvKernel 3 -mode 1 -gbase 0 -gser 1 -logfile debug.log -tt 62 -tstop 75 -tstart 60 -fanmin 50 -fanmax 100 -cclock +50 -mclock +450 -powlim -20 -straps 1
2021.11.01:11:28:40.307: main CUDA version: 9.0, CUDA runtime: 8.0
2021.11.01:11:28:40.314: main Available GPUs for mining:
2021.11.01:11:28:40.314: main GPU0: GeForce GTX 1070 (pcie 1), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU1: GeForce GTX 1070 (pcie 2), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU2: GeForce GTX 1070 (pcie 3), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU3: GeForce GTX 1070 (pcie 4), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU4: GeForce GTX 1070 (pcie 5), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU5: GeForce GTX 1070 (pcie 6), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU6: GeForce GTX 1070 (pcie, CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU7: GeForce GTX 1070 (pcie 9), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
<--- exit without any info
Miner is started with following ENV :
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
Regards,
Stannicek
We use 388.71 drivers (also on other working machines).
2021.11.01:11:28:39.771: main Phoenix Miner 5.8c Windows/msvc - Release build
2021.11.01:11:28:39.771: main Cmd line:
2021.11.01:11:28:39.771: main config.txt: -nvidia -nvKernel 3 -mode 1 -gbase 0 -gser 1 -logfile debug.log -tt 62 -tstop 75 -tstart 60 -fanmin 50 -fanmax 100 -cclock +50 -mclock +450 -powlim -20 -straps 1
2021.11.01:11:28:40.307: main CUDA version: 9.0, CUDA runtime: 8.0
2021.11.01:11:28:40.314: main Available GPUs for mining:
2021.11.01:11:28:40.314: main GPU0: GeForce GTX 1070 (pcie 1), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU1: GeForce GTX 1070 (pcie 2), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU2: GeForce GTX 1070 (pcie 3), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU3: GeForce GTX 1070 (pcie 4), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU4: GeForce GTX 1070 (pcie 5), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU5: GeForce GTX 1070 (pcie 6), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU6: GeForce GTX 1070 (pcie
, CUDA cap. 6.1, 8 GB VRAM, 15 CUs2021.11.01:11:28:40.314: main GPU7: GeForce GTX 1070 (pcie 9), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
<--- exit without any info
Miner is started with following ENV :
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
Regards,
Stannicek
I have the same problem. Solved it by updating to 460.89. Yours are too old.
I ended up with NBMiner + MSI Afterburner (oldschool like 2017
) - no drivers reinstall - hashrate almost the same, but working. The reason behind that is windows not updated since install (Windows 10 Version 1703, 10.0.15063).my win rigs are win10 1607, 14smth, never had any issues related to OS.
That's cool. :-) I tried to upgrade NV drivers over VNC, but Win always ended up with BSOD+reboot plus corrupted cuda dlls.
November 02, 2021, 08:31:21 AM
I upgraded from old 5.2c miner (due to DAG size) to 5.8c and now miner even doesn't start ... any suggestions?
We use 388.71 drivers (also on other working machines).
2021.11.01:11:28:39.771: main Phoenix Miner 5.8c Windows/msvc - Release build
2021.11.01:11:28:39.771: main Cmd line:
2021.11.01:11:28:39.771: main config.txt: -nvidia -nvKernel 3 -mode 1 -gbase 0 -gser 1 -logfile debug.log -tt 62 -tstop 75 -tstart 60 -fanmin 50 -fanmax 100 -cclock +50 -mclock +450 -powlim -20 -straps 1
2021.11.01:11:28:40.307: main CUDA version: 9.0, CUDA runtime: 8.0
2021.11.01:11:28:40.314: main Available GPUs for mining:
2021.11.01:11:28:40.314: main GPU0: GeForce GTX 1070 (pcie 1), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU1: GeForce GTX 1070 (pcie 2), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU2: GeForce GTX 1070 (pcie 3), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU3: GeForce GTX 1070 (pcie 4), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU4: GeForce GTX 1070 (pcie 5), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU5: GeForce GTX 1070 (pcie 6), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU6: GeForce GTX 1070 (pcie, CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU7: GeForce GTX 1070 (pcie 9), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
<--- exit without any info
Miner is started with following ENV :
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
Regards,
Stannicek
We use 388.71 drivers (also on other working machines).
2021.11.01:11:28:39.771: main Phoenix Miner 5.8c Windows/msvc - Release build
2021.11.01:11:28:39.771: main Cmd line:
2021.11.01:11:28:39.771: main config.txt: -nvidia -nvKernel 3 -mode 1 -gbase 0 -gser 1 -logfile debug.log -tt 62 -tstop 75 -tstart 60 -fanmin 50 -fanmax 100 -cclock +50 -mclock +450 -powlim -20 -straps 1
2021.11.01:11:28:40.307: main CUDA version: 9.0, CUDA runtime: 8.0
2021.11.01:11:28:40.314: main Available GPUs for mining:
2021.11.01:11:28:40.314: main GPU0: GeForce GTX 1070 (pcie 1), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU1: GeForce GTX 1070 (pcie 2), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU2: GeForce GTX 1070 (pcie 3), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU3: GeForce GTX 1070 (pcie 4), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU4: GeForce GTX 1070 (pcie 5), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU5: GeForce GTX 1070 (pcie 6), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU6: GeForce GTX 1070 (pcie
, CUDA cap. 6.1, 8 GB VRAM, 15 CUs2021.11.01:11:28:40.314: main GPU7: GeForce GTX 1070 (pcie 9), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
<--- exit without any info
Miner is started with following ENV :
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
Regards,
Stannicek
I have the same problem. Solved it by updating to 460.89. Yours are too old.
I ended up with NBMiner + MSI Afterburner (oldschool like 2017
) - no drivers reinstall - hashrate almost the same, but working. The reason behind that is windows not updated since install (Windows 10 Version 1703, 10.0.15063).my win rigs are win10 1607, 14smth, never had any issues related to OS.
November 02, 2021, 02:02:35 AM
I upgraded from old 5.2c miner (due to DAG size) to 5.8c and now miner even doesn't start ... any suggestions?
We use 388.71 drivers (also on other working machines).
2021.11.01:11:28:39.771: main Phoenix Miner 5.8c Windows/msvc - Release build
2021.11.01:11:28:39.771: main Cmd line:
2021.11.01:11:28:39.771: main config.txt: -nvidia -nvKernel 3 -mode 1 -gbase 0 -gser 1 -logfile debug.log -tt 62 -tstop 75 -tstart 60 -fanmin 50 -fanmax 100 -cclock +50 -mclock +450 -powlim -20 -straps 1
2021.11.01:11:28:40.307: main CUDA version: 9.0, CUDA runtime: 8.0
2021.11.01:11:28:40.314: main Available GPUs for mining:
2021.11.01:11:28:40.314: main GPU0: GeForce GTX 1070 (pcie 1), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU1: GeForce GTX 1070 (pcie 2), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU2: GeForce GTX 1070 (pcie 3), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU3: GeForce GTX 1070 (pcie 4), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU4: GeForce GTX 1070 (pcie 5), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU5: GeForce GTX 1070 (pcie 6), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU6: GeForce GTX 1070 (pcie, CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU7: GeForce GTX 1070 (pcie 9), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
<--- exit without any info
Miner is started with following ENV :
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
Regards,
Stannicek
We use 388.71 drivers (also on other working machines).
2021.11.01:11:28:39.771: main Phoenix Miner 5.8c Windows/msvc - Release build
2021.11.01:11:28:39.771: main Cmd line:
2021.11.01:11:28:39.771: main config.txt: -nvidia -nvKernel 3 -mode 1 -gbase 0 -gser 1 -logfile debug.log -tt 62 -tstop 75 -tstart 60 -fanmin 50 -fanmax 100 -cclock +50 -mclock +450 -powlim -20 -straps 1
2021.11.01:11:28:40.307: main CUDA version: 9.0, CUDA runtime: 8.0
2021.11.01:11:28:40.314: main Available GPUs for mining:
2021.11.01:11:28:40.314: main GPU0: GeForce GTX 1070 (pcie 1), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU1: GeForce GTX 1070 (pcie 2), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU2: GeForce GTX 1070 (pcie 3), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU3: GeForce GTX 1070 (pcie 4), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU4: GeForce GTX 1070 (pcie 5), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU5: GeForce GTX 1070 (pcie 6), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU6: GeForce GTX 1070 (pcie
, CUDA cap. 6.1, 8 GB VRAM, 15 CUs2021.11.01:11:28:40.314: main GPU7: GeForce GTX 1070 (pcie 9), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
<--- exit without any info
Miner is started with following ENV :
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
Regards,
Stannicek
I have the same problem. Solved it by updating to 460.89. Yours are too old.
I ended up with NBMiner + MSI Afterburner (oldschool like 2017
) - no drivers reinstall - hashrate almost the same, but working. The reason behind that is windows not updated since install (Windows 10 Version 1703, 10.0.15063). November 01, 2021, 02:34:10 PM
Hi,
unfortunately I have a problem with all phoenixminers over version v5.4c. From phoenixminer-v5.5 I have the problem that the program tells me very quickly that a GPU fault is allegedly detected.
GPU fault detected: 146 0x0ff8c40c for process PhoenixMiner pid 9762 thread PhoenixMiner pid 9762 [ 33.172465] amdgpu 0000:03:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00105DFF [ 33.178320] amdgpu 0000:03:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x080C400C [ 33.184106] amdgpu 0000:03:00.0: amdgpu: VM fault (0x0c, vmid 4, pasid 32769) at page 1072639, read from 'TC3' (0x54433300) (196) [ 33.243697] amdgpu 0000:03:00.0: amdgpu: GPU fault detected: 146 0x0ff8c40c for process PhoenixMiner pid 9762 thread PhoenixMiner pid 9762 [ 33.249757] amdgpu 0000:03:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00105DFF [ 33.255801] amdgpu 0000:03:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x080C400C [ 33.261813] amdgpu 0000:03:00.0: amdgpu: VM fault (0x0c, vmid 4, pasid 32769) at page 1072639, read from 'TC3' (0x54433300) (196)
The RIG Data
6x Powercolor RX 580 8GB
OS : simplemining
Kernel: 5.10.60-sm1#021
Driver: amd20.40r5.11.24
Auto Update: v1319
CPU: Intel(R) Pentium(R) CPU G3260 @ 3.30GHz
RAM: 4 GB
Drive: Samsung SSD 850 120GB
Motherboard: ASRock H81 Pro BTC R2.0
Motherboard BIOS: P1.20 07/22/2014
Startconfig:
-pool ssl://eu1.ethermine.org:5555 -wal walletadress.W1 -rmode 2
The same system without changing anything runs flawlessly with the phoenixminer-v5.4c at around 190 MH / s.
Thanks for any help.
unfortunately I have a problem with all phoenixminers over version v5.4c. From phoenixminer-v5.5 I have the problem that the program tells me very quickly that a GPU fault is allegedly detected.
GPU fault detected: 146 0x0ff8c40c for process PhoenixMiner pid 9762 thread PhoenixMiner pid 9762 [ 33.172465] amdgpu 0000:03:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00105DFF [ 33.178320] amdgpu 0000:03:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x080C400C [ 33.184106] amdgpu 0000:03:00.0: amdgpu: VM fault (0x0c, vmid 4, pasid 32769) at page 1072639, read from 'TC3' (0x54433300) (196) [ 33.243697] amdgpu 0000:03:00.0: amdgpu: GPU fault detected: 146 0x0ff8c40c for process PhoenixMiner pid 9762 thread PhoenixMiner pid 9762 [ 33.249757] amdgpu 0000:03:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00105DFF [ 33.255801] amdgpu 0000:03:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x080C400C [ 33.261813] amdgpu 0000:03:00.0: amdgpu: VM fault (0x0c, vmid 4, pasid 32769) at page 1072639, read from 'TC3' (0x54433300) (196)
The RIG Data
6x Powercolor RX 580 8GB
OS : simplemining
Kernel: 5.10.60-sm1#021
Driver: amd20.40r5.11.24
Auto Update: v1319
CPU: Intel(R) Pentium(R) CPU G3260 @ 3.30GHz
RAM: 4 GB
Drive: Samsung SSD 850 120GB
Motherboard: ASRock H81 Pro BTC R2.0
Motherboard BIOS: P1.20 07/22/2014
Startconfig:
-pool ssl://eu1.ethermine.org:5555 -wal walletadress.W1 -rmode 2
The same system without changing anything runs flawlessly with the phoenixminer-v5.4c at around 190 MH / s.
Thanks for any help.
If it runs without issue with PM v5.4c why you want to change? My understanding is that most latest change were for later GPUs.
some time ago I had to update my ETC-ZIL rigs(several at the same time) as 5.2 (or was it 5.4?) completely lost stability for some unknown reason. now all rigs are fine on 5.7b
EDIT: same mobo 11 and 12 GPUs rigs ... on Windows
November 01, 2021, 12:11:33 PM
Hi,
unfortunately I have a problem with all phoenixminers over version v5.4c. From phoenixminer-v5.5 I have the problem that the program tells me very quickly that a GPU fault is allegedly detected.
GPU fault detected: 146 0x0ff8c40c for process PhoenixMiner pid 9762 thread PhoenixMiner pid 9762 [ 33.172465] amdgpu 0000:03:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00105DFF [ 33.178320] amdgpu 0000:03:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x080C400C [ 33.184106] amdgpu 0000:03:00.0: amdgpu: VM fault (0x0c, vmid 4, pasid 32769) at page 1072639, read from 'TC3' (0x54433300) (196) [ 33.243697] amdgpu 0000:03:00.0: amdgpu: GPU fault detected: 146 0x0ff8c40c for process PhoenixMiner pid 9762 thread PhoenixMiner pid 9762 [ 33.249757] amdgpu 0000:03:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00105DFF [ 33.255801] amdgpu 0000:03:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x080C400C [ 33.261813] amdgpu 0000:03:00.0: amdgpu: VM fault (0x0c, vmid 4, pasid 32769) at page 1072639, read from 'TC3' (0x54433300) (196)
The RIG Data
6x Powercolor RX 580 8GB
OS : simplemining
Kernel: 5.10.60-sm1#021
Driver: amd20.40r5.11.24
Auto Update: v1319
CPU: Intel(R) Pentium(R) CPU G3260 @ 3.30GHz
RAM: 4 GB
Drive: Samsung SSD 850 120GB
Motherboard: ASRock H81 Pro BTC R2.0
Motherboard BIOS: P1.20 07/22/2014
Startconfig:
-pool ssl://eu1.ethermine.org:5555 -wal walletadress.W1 -rmode 2
The same system without changing anything runs flawlessly with the phoenixminer-v5.4c at around 190 MH / s.
Thanks for any help.
unfortunately I have a problem with all phoenixminers over version v5.4c. From phoenixminer-v5.5 I have the problem that the program tells me very quickly that a GPU fault is allegedly detected.
GPU fault detected: 146 0x0ff8c40c for process PhoenixMiner pid 9762 thread PhoenixMiner pid 9762 [ 33.172465] amdgpu 0000:03:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00105DFF [ 33.178320] amdgpu 0000:03:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x080C400C [ 33.184106] amdgpu 0000:03:00.0: amdgpu: VM fault (0x0c, vmid 4, pasid 32769) at page 1072639, read from 'TC3' (0x54433300) (196) [ 33.243697] amdgpu 0000:03:00.0: amdgpu: GPU fault detected: 146 0x0ff8c40c for process PhoenixMiner pid 9762 thread PhoenixMiner pid 9762 [ 33.249757] amdgpu 0000:03:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00105DFF [ 33.255801] amdgpu 0000:03:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x080C400C [ 33.261813] amdgpu 0000:03:00.0: amdgpu: VM fault (0x0c, vmid 4, pasid 32769) at page 1072639, read from 'TC3' (0x54433300) (196)
The RIG Data
6x Powercolor RX 580 8GB
OS : simplemining
Kernel: 5.10.60-sm1#021
Driver: amd20.40r5.11.24
Auto Update: v1319
CPU: Intel(R) Pentium(R) CPU G3260 @ 3.30GHz
RAM: 4 GB
Drive: Samsung SSD 850 120GB
Motherboard: ASRock H81 Pro BTC R2.0
Motherboard BIOS: P1.20 07/22/2014
Startconfig:
-pool ssl://eu1.ethermine.org:5555 -wal walletadress.W1 -rmode 2
The same system without changing anything runs flawlessly with the phoenixminer-v5.4c at around 190 MH / s.
Thanks for any help.
If it runs without issue with PM v5.4c why you want to change? My understanding is that most latest change were for later GPUs.
November 01, 2021, 09:37:57 AM
Hi,
but which mining software is the best?
but which mining software is the best?
November 01, 2021, 09:29:16 AM
Hi,
unfortunately I have a problem with all phoenixminers over version v5.4c. From phoenixminer-v5.5 I have the problem that the program tells me very quickly that a GPU fault is allegedly detected.
GPU fault detected: 146 0x0ff8c40c for process PhoenixMiner pid 9762 thread PhoenixMiner pid 9762 [ 33.172465] amdgpu 0000:03:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00105DFF [ 33.178320] amdgpu 0000:03:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x080C400C [ 33.184106] amdgpu 0000:03:00.0: amdgpu: VM fault (0x0c, vmid 4, pasid 32769) at page 1072639, read from 'TC3' (0x54433300) (196) [ 33.243697] amdgpu 0000:03:00.0: amdgpu: GPU fault detected: 146 0x0ff8c40c for process PhoenixMiner pid 9762 thread PhoenixMiner pid 9762 [ 33.249757] amdgpu 0000:03:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00105DFF [ 33.255801] amdgpu 0000:03:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x080C400C [ 33.261813] amdgpu 0000:03:00.0: amdgpu: VM fault (0x0c, vmid 4, pasid 32769) at page 1072639, read from 'TC3' (0x54433300) (196)
The RIG Data
6x Powercolor RX 580 8GB
OS : simplemining
Kernel: 5.10.60-sm1#021
Driver: amd20.40r5.11.24
Auto Update: v1319
CPU: Intel(R) Pentium(R) CPU G3260 @ 3.30GHz
RAM: 4 GB
Drive: Samsung SSD 850 120GB
Motherboard: ASRock H81 Pro BTC R2.0
Motherboard BIOS: P1.20 07/22/2014
Startconfig:
-pool ssl://eu1.ethermine.org:5555 -wal walletadress.W1 -rmode 2
The same system without changing anything runs flawlessly with the phoenixminer-v5.4c at around 190 MH / s.
Thanks for any help.
unfortunately I have a problem with all phoenixminers over version v5.4c. From phoenixminer-v5.5 I have the problem that the program tells me very quickly that a GPU fault is allegedly detected.
GPU fault detected: 146 0x0ff8c40c for process PhoenixMiner pid 9762 thread PhoenixMiner pid 9762 [ 33.172465] amdgpu 0000:03:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00105DFF [ 33.178320] amdgpu 0000:03:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x080C400C [ 33.184106] amdgpu 0000:03:00.0: amdgpu: VM fault (0x0c, vmid 4, pasid 32769) at page 1072639, read from 'TC3' (0x54433300) (196) [ 33.243697] amdgpu 0000:03:00.0: amdgpu: GPU fault detected: 146 0x0ff8c40c for process PhoenixMiner pid 9762 thread PhoenixMiner pid 9762 [ 33.249757] amdgpu 0000:03:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00105DFF [ 33.255801] amdgpu 0000:03:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x080C400C [ 33.261813] amdgpu 0000:03:00.0: amdgpu: VM fault (0x0c, vmid 4, pasid 32769) at page 1072639, read from 'TC3' (0x54433300) (196)
The RIG Data
6x Powercolor RX 580 8GB
OS : simplemining
Kernel: 5.10.60-sm1#021
Driver: amd20.40r5.11.24
Auto Update: v1319
CPU: Intel(R) Pentium(R) CPU G3260 @ 3.30GHz
RAM: 4 GB
Drive: Samsung SSD 850 120GB
Motherboard: ASRock H81 Pro BTC R2.0
Motherboard BIOS: P1.20 07/22/2014
Startconfig:
-pool ssl://eu1.ethermine.org:5555 -wal walletadress.W1 -rmode 2
The same system without changing anything runs flawlessly with the phoenixminer-v5.4c at around 190 MH / s.
Thanks for any help.
Use other miner. Phoenixminer is shit
Or try other GPU driver
November 01, 2021, 09:20:22 AM
Hi,
unfortunately I have a problem with all phoenixminers over version v5.4c. From phoenixminer-v5.5 I have the problem that the program tells me very quickly that a GPU fault is allegedly detected.
GPU fault detected: 146 0x0ff8c40c for process PhoenixMiner pid 9762 thread PhoenixMiner pid 9762 [ 33.172465] amdgpu 0000:03:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00105DFF [ 33.178320] amdgpu 0000:03:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x080C400C [ 33.184106] amdgpu 0000:03:00.0: amdgpu: VM fault (0x0c, vmid 4, pasid 32769) at page 1072639, read from 'TC3' (0x54433300) (196) [ 33.243697] amdgpu 0000:03:00.0: amdgpu: GPU fault detected: 146 0x0ff8c40c for process PhoenixMiner pid 9762 thread PhoenixMiner pid 9762 [ 33.249757] amdgpu 0000:03:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00105DFF [ 33.255801] amdgpu 0000:03:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x080C400C [ 33.261813] amdgpu 0000:03:00.0: amdgpu: VM fault (0x0c, vmid 4, pasid 32769) at page 1072639, read from 'TC3' (0x54433300) (196)
The RIG Data
6x Powercolor RX 580 8GB
OS : simplemining
Kernel: 5.10.60-sm1#021
Driver: amd20.40r5.11.24
Auto Update: v1319
CPU: Intel(R) Pentium(R) CPU G3260 @ 3.30GHz
RAM: 4 GB
Drive: Samsung SSD 850 120GB
Motherboard: ASRock H81 Pro BTC R2.0
Motherboard BIOS: P1.20 07/22/2014
Startconfig:
-pool ssl://eu1.ethermine.org:5555 -wal walletadress.W1 -rmode 2
The same system without changing anything runs flawlessly with the phoenixminer-v5.4c at around 190 MH / s.
Thanks for any help.
unfortunately I have a problem with all phoenixminers over version v5.4c. From phoenixminer-v5.5 I have the problem that the program tells me very quickly that a GPU fault is allegedly detected.
GPU fault detected: 146 0x0ff8c40c for process PhoenixMiner pid 9762 thread PhoenixMiner pid 9762 [ 33.172465] amdgpu 0000:03:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00105DFF [ 33.178320] amdgpu 0000:03:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x080C400C [ 33.184106] amdgpu 0000:03:00.0: amdgpu: VM fault (0x0c, vmid 4, pasid 32769) at page 1072639, read from 'TC3' (0x54433300) (196) [ 33.243697] amdgpu 0000:03:00.0: amdgpu: GPU fault detected: 146 0x0ff8c40c for process PhoenixMiner pid 9762 thread PhoenixMiner pid 9762 [ 33.249757] amdgpu 0000:03:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00105DFF [ 33.255801] amdgpu 0000:03:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x080C400C [ 33.261813] amdgpu 0000:03:00.0: amdgpu: VM fault (0x0c, vmid 4, pasid 32769) at page 1072639, read from 'TC3' (0x54433300) (196)
The RIG Data
6x Powercolor RX 580 8GB
OS : simplemining
Kernel: 5.10.60-sm1#021
Driver: amd20.40r5.11.24
Auto Update: v1319
CPU: Intel(R) Pentium(R) CPU G3260 @ 3.30GHz
RAM: 4 GB
Drive: Samsung SSD 850 120GB
Motherboard: ASRock H81 Pro BTC R2.0
Motherboard BIOS: P1.20 07/22/2014
Startconfig:
-pool ssl://eu1.ethermine.org:5555 -wal walletadress.W1 -rmode 2
The same system without changing anything runs flawlessly with the phoenixminer-v5.4c at around 190 MH / s.
Thanks for any help.
November 01, 2021, 08:52:00 AM
All my rigs went offline with the message say to "upgrade to the latest version of Phoenix Miner." I'm running 5.3b. However everyone is saying the 1st post for the latest version is a scam. Where can I get an updated legit version?
When in doubt, refer to the first post. That one is posted by the author himself. Anyone else claiming to have the latest (which is pretty prevalent here) is a compromised account/ threat actor.
The post in question is from the original author, who people are speculating is hacked. Both posts lead to a .info site. Is this considered the safe mirror? People quoting were talking about a github link which afaik is no longer there so im also confused. If anyone could provide insight it would be greatly appreciated
https://phoenixminer.info/downloads/
The only legit link for Phoenix miner is the one above which I copied from the first page of this thread.If you check there,it is nothing more than a directory to download all the legit versions of Phoenix miner including the latest one the 5.8c version.All other links are hackers/threat actors or even script kiddies trying to infect you with malware,a friend of mine downloaded the version 5.5c from untrusted sources and what happened to him is that after a certain time the bat file redirected my friend wallet to the hacker wallet and he was seeing his stats not updating for hours,so be extremely careful here.
November 01, 2021, 08:41:54 AM
All my rigs went offline with the message say to "upgrade to the latest version of Phoenix Miner." I'm running 5.3b. However everyone is saying the 1st post for the latest version is a scam. Where can I get an updated legit version?
When in doubt, refer to the first post. That one is posted by the author himself. Anyone else claiming to have the latest (which is pretty prevalent here) is a compromised account/ threat actor.
The post in question is from the original author, who people are speculating is hacked. Both posts lead to a .info site. Is this considered the safe mirror? People quoting were talking about a github link which afaik is no longer there so im also confused. If anyone could provide insight it would be greatly appreciated
November 01, 2021, 08:11:18 AM
All my rigs went offline with the message say to "upgrade to the latest version of Phoenix Miner." I'm running 5.3b. However everyone is saying the 1st post for the latest version is a scam. Where can I get an updated legit version?
When in doubt, refer to the first post. That one is posted by the author himself. Anyone else claiming to have the latest (which is pretty prevalent here) is a compromised account/ threat actor.
November 01, 2021, 07:11:33 AM
All my rigs went offline with the message say to "upgrade to the latest version of Phoenix Miner." I'm running 5.3b. However everyone is saying the 1st post for the latest version is a scam. Where can I get an updated legit version?
November 01, 2021, 06:57:26 AM
I upgraded from old 5.2c miner (due to DAG size) to 5.8c and now miner even doesn't start ... any suggestions?
We use 388.71 drivers (also on other working machines).
2021.11.01:11:28:39.771: main Phoenix Miner 5.8c Windows/msvc - Release build
2021.11.01:11:28:39.771: main Cmd line:
2021.11.01:11:28:39.771: main config.txt: -nvidia -nvKernel 3 -mode 1 -gbase 0 -gser 1 -logfile debug.log -tt 62 -tstop 75 -tstart 60 -fanmin 50 -fanmax 100 -cclock +50 -mclock +450 -powlim -20 -straps 1
2021.11.01:11:28:40.307: main CUDA version: 9.0, CUDA runtime: 8.0
2021.11.01:11:28:40.314: main Available GPUs for mining:
2021.11.01:11:28:40.314: main GPU0: GeForce GTX 1070 (pcie 1), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU1: GeForce GTX 1070 (pcie 2), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU2: GeForce GTX 1070 (pcie 3), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU3: GeForce GTX 1070 (pcie 4), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU4: GeForce GTX 1070 (pcie 5), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU5: GeForce GTX 1070 (pcie 6), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU6: GeForce GTX 1070 (pcie, CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU7: GeForce GTX 1070 (pcie 9), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
<--- exit without any info
Miner is started with following ENV :
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
Regards,
Stannicek
We use 388.71 drivers (also on other working machines).
2021.11.01:11:28:39.771: main Phoenix Miner 5.8c Windows/msvc - Release build
2021.11.01:11:28:39.771: main Cmd line:
2021.11.01:11:28:39.771: main config.txt: -nvidia -nvKernel 3 -mode 1 -gbase 0 -gser 1 -logfile debug.log -tt 62 -tstop 75 -tstart 60 -fanmin 50 -fanmax 100 -cclock +50 -mclock +450 -powlim -20 -straps 1
2021.11.01:11:28:40.307: main CUDA version: 9.0, CUDA runtime: 8.0
2021.11.01:11:28:40.314: main Available GPUs for mining:
2021.11.01:11:28:40.314: main GPU0: GeForce GTX 1070 (pcie 1), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU1: GeForce GTX 1070 (pcie 2), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU2: GeForce GTX 1070 (pcie 3), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU3: GeForce GTX 1070 (pcie 4), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU4: GeForce GTX 1070 (pcie 5), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU5: GeForce GTX 1070 (pcie 6), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU6: GeForce GTX 1070 (pcie
, CUDA cap. 6.1, 8 GB VRAM, 15 CUs2021.11.01:11:28:40.314: main GPU7: GeForce GTX 1070 (pcie 9), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
<--- exit without any info
Miner is started with following ENV :
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
Regards,
Stannicek
I have the same problem. Solved it by updating to 460.89. Yours are too old.
November 01, 2021, 06:04:02 AM
I tied all other old versions 5.8b, 5.6... all the same issue (also after windows restart).
I upgraded from old 5.2c miner (due to DAG size) to 5.8c and now miner even doesn't start ... any suggestions?
We use 388.71 drivers (also on other working machines).
2021.11.01:11:28:39.771: main Phoenix Miner 5.8c Windows/msvc - Release build
2021.11.01:11:28:39.771: main Cmd line:
2021.11.01:11:28:39.771: main config.txt: -nvidia -nvKernel 3 -mode 1 -gbase 0 -gser 1 -logfile debug.log -tt 62 -tstop 75 -tstart 60 -fanmin 50 -fanmax 100 -cclock +50 -mclock +450 -powlim -20 -straps 1
2021.11.01:11:28:40.307: main CUDA version: 9.0, CUDA runtime: 8.0
2021.11.01:11:28:40.314: main Available GPUs for mining:
2021.11.01:11:28:40.314: main GPU0: GeForce GTX 1070 (pcie 1), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU1: GeForce GTX 1070 (pcie 2), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU2: GeForce GTX 1070 (pcie 3), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU3: GeForce GTX 1070 (pcie 4), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU4: GeForce GTX 1070 (pcie 5), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU5: GeForce GTX 1070 (pcie 6), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU6: GeForce GTX 1070 (pcie, CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU7: GeForce GTX 1070 (pcie 9), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
<--- exit without any info
Miner is started with following ENV :
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
Regards,
Stannicek
We use 388.71 drivers (also on other working machines).
2021.11.01:11:28:39.771: main Phoenix Miner 5.8c Windows/msvc - Release build
2021.11.01:11:28:39.771: main Cmd line:
2021.11.01:11:28:39.771: main config.txt: -nvidia -nvKernel 3 -mode 1 -gbase 0 -gser 1 -logfile debug.log -tt 62 -tstop 75 -tstart 60 -fanmin 50 -fanmax 100 -cclock +50 -mclock +450 -powlim -20 -straps 1
2021.11.01:11:28:40.307: main CUDA version: 9.0, CUDA runtime: 8.0
2021.11.01:11:28:40.314: main Available GPUs for mining:
2021.11.01:11:28:40.314: main GPU0: GeForce GTX 1070 (pcie 1), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU1: GeForce GTX 1070 (pcie 2), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU2: GeForce GTX 1070 (pcie 3), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU3: GeForce GTX 1070 (pcie 4), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU4: GeForce GTX 1070 (pcie 5), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU5: GeForce GTX 1070 (pcie 6), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU6: GeForce GTX 1070 (pcie
, CUDA cap. 6.1, 8 GB VRAM, 15 CUs2021.11.01:11:28:40.314: main GPU7: GeForce GTX 1070 (pcie 9), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
<--- exit without any info
Miner is started with following ENV :
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
Regards,
Stannicek
Any possible way to upgrade the Nvidia drivers as they are a bit old in the teeth, also try without the ENV settings.
I have a GTX 1070 running with PM 8.5c and running fine with nvidia drivers 470 and cuda 11.4 although I am running Linux.
My config is:
-cdm 1
-cdmport 10050
-nvKernel 3
-log 0
# -logdir /home/filip/Miners/logs
# -logfile dranged-pm.log
-hwm 2
-ttj 2:65
-hstats 2
-prate 0.0703
-powlim -28
-cclock whatever your settings
-mclock +800
I would try without the -straps
November 01, 2021, 05:37:59 AM
I tied all other old versions 5.8b, 5.6... all the same issue (also after windows restart).
I upgraded from old 5.2c miner (due to DAG size) to 5.8c and now miner even doesn't start ... any suggestions?
We use 388.71 drivers (also on other working machines).
2021.11.01:11:28:39.771: main Phoenix Miner 5.8c Windows/msvc - Release build
2021.11.01:11:28:39.771: main Cmd line:
2021.11.01:11:28:39.771: main config.txt: -nvidia -nvKernel 3 -mode 1 -gbase 0 -gser 1 -logfile debug.log -tt 62 -tstop 75 -tstart 60 -fanmin 50 -fanmax 100 -cclock +50 -mclock +450 -powlim -20 -straps 1
2021.11.01:11:28:40.307: main CUDA version: 9.0, CUDA runtime: 8.0
2021.11.01:11:28:40.314: main Available GPUs for mining:
2021.11.01:11:28:40.314: main GPU0: GeForce GTX 1070 (pcie 1), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU1: GeForce GTX 1070 (pcie 2), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU2: GeForce GTX 1070 (pcie 3), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU3: GeForce GTX 1070 (pcie 4), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU4: GeForce GTX 1070 (pcie 5), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU5: GeForce GTX 1070 (pcie 6), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU6: GeForce GTX 1070 (pcie, CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU7: GeForce GTX 1070 (pcie 9), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
<--- exit without any info
Miner is started with following ENV :
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
Regards,
Stannicek
We use 388.71 drivers (also on other working machines).
2021.11.01:11:28:39.771: main Phoenix Miner 5.8c Windows/msvc - Release build
2021.11.01:11:28:39.771: main Cmd line:
2021.11.01:11:28:39.771: main config.txt: -nvidia -nvKernel 3 -mode 1 -gbase 0 -gser 1 -logfile debug.log -tt 62 -tstop 75 -tstart 60 -fanmin 50 -fanmax 100 -cclock +50 -mclock +450 -powlim -20 -straps 1
2021.11.01:11:28:40.307: main CUDA version: 9.0, CUDA runtime: 8.0
2021.11.01:11:28:40.314: main Available GPUs for mining:
2021.11.01:11:28:40.314: main GPU0: GeForce GTX 1070 (pcie 1), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU1: GeForce GTX 1070 (pcie 2), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU2: GeForce GTX 1070 (pcie 3), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU3: GeForce GTX 1070 (pcie 4), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU4: GeForce GTX 1070 (pcie 5), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU5: GeForce GTX 1070 (pcie 6), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU6: GeForce GTX 1070 (pcie
, CUDA cap. 6.1, 8 GB VRAM, 15 CUs2021.11.01:11:28:40.314: main GPU7: GeForce GTX 1070 (pcie 9), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
<--- exit without any info
Miner is started with following ENV :
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
Regards,
Stannicek
November 01, 2021, 05:31:59 AM
I upgraded from old 5.2c miner (due to DAG size) to 5.8c and now miner even doesn't start ... any suggestions?
We use 388.71 drivers (also on other working machines).
2021.11.01:11:28:39.771: main Phoenix Miner 5.8c Windows/msvc - Release build
2021.11.01:11:28:39.771: main Cmd line:
2021.11.01:11:28:39.771: main config.txt: -nvidia -nvKernel 3 -mode 1 -gbase 0 -gser 1 -logfile debug.log -tt 62 -tstop 75 -tstart 60 -fanmin 50 -fanmax 100 -cclock +50 -mclock +450 -powlim -20 -straps 1
2021.11.01:11:28:40.307: main CUDA version: 9.0, CUDA runtime: 8.0
2021.11.01:11:28:40.314: main Available GPUs for mining:
2021.11.01:11:28:40.314: main GPU0: GeForce GTX 1070 (pcie 1), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU1: GeForce GTX 1070 (pcie 2), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU2: GeForce GTX 1070 (pcie 3), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU3: GeForce GTX 1070 (pcie 4), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU4: GeForce GTX 1070 (pcie 5), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU5: GeForce GTX 1070 (pcie 6), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU6: GeForce GTX 1070 (pcie, CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU7: GeForce GTX 1070 (pcie 9), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
<--- exit without any info
Miner is started with following ENV :
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
Regards,
Stannicek
We use 388.71 drivers (also on other working machines).
2021.11.01:11:28:39.771: main Phoenix Miner 5.8c Windows/msvc - Release build
2021.11.01:11:28:39.771: main Cmd line:
2021.11.01:11:28:39.771: main config.txt: -nvidia -nvKernel 3 -mode 1 -gbase 0 -gser 1 -logfile debug.log -tt 62 -tstop 75 -tstart 60 -fanmin 50 -fanmax 100 -cclock +50 -mclock +450 -powlim -20 -straps 1
2021.11.01:11:28:40.307: main CUDA version: 9.0, CUDA runtime: 8.0
2021.11.01:11:28:40.314: main Available GPUs for mining:
2021.11.01:11:28:40.314: main GPU0: GeForce GTX 1070 (pcie 1), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU1: GeForce GTX 1070 (pcie 2), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU2: GeForce GTX 1070 (pcie 3), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU3: GeForce GTX 1070 (pcie 4), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU4: GeForce GTX 1070 (pcie 5), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU5: GeForce GTX 1070 (pcie 6), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU6: GeForce GTX 1070 (pcie
, CUDA cap. 6.1, 8 GB VRAM, 15 CUs2021.11.01:11:28:40.314: main GPU7: GeForce GTX 1070 (pcie 9), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
<--- exit without any info
Miner is started with following ENV :
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
Regards,
Stannicek
November 01, 2021, 05:17:01 AM
Does anyone know when exactly ETH becomes PoS ?
And when it's happens what coin is good to replace in our mining rigs (especially with AMD Polaris GPUS) ?
And when it's happens what coin is good to replace in our mining rigs (especially with AMD Polaris GPUS) ?
No one really knows as the devs of Ethereum are well known in missing the deadlines they pone to do.Based on that I would say as a minimum can happen in late 2022 early 2023 so there is enough time to keep mining Ethereum and making money like all miners do.
Plenty of other coins to mine if Eth goes PoS and the top of them are,ERG,ETC and RVN.
According to red panda mining https://www.youtube.com/watch?v=q2hRc1ASpaI we probably have another 8 months before it might change to PoS.
Jump to: