PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 287.

Dowper_

member

Activity: 221

Merit: 12

Quote from: UnclWish on April 08, 2020, 09:44:04 AM

Quote from: Dowper_ on April 07, 2020, 12:36:05 PM

We need miner update for newest drivers!

Unfortunately, looks like project dropped. Author didn't appeared here from 22 january 2020.

This is not good... Angry

sergioheadache

jr. member

Activity: 43

Merit: 1

Quote from: ManDoneKTM on April 03, 2020, 08:30:49 AM

i cant reach 34.1 mhs with PM ... well , with cm i have 34 and 34.1 on all my rx 580 series ... anyone has a solution for this ?

seriously

34

how are you doing that?
can you share the settings?

zeezoo

newbie

Activity: 42

Merit: 0

Quote from: Nightworker88 on April 08, 2020, 01:20:24 PM

Hello, would need some help mining Quarkchain QKC

PhoenixMiner working well for me for a long time and this is not my problem.

i took from binance a QKC address, write in miner, mining on qkc.ontopool.com. all was working without issues for hours.

So now the problem: qkc address from binance - and never had issues when i took for testing one address from them - looks like "xyz"

BUT ontopool "makes" from it "xyz000000" - all other mining adresses there also look like this! - so i have coins on "xyz00000" but cannot take them, ok its maybe 2$, so not worth

but what i make wrong?

THX

Don't mine QKC on Binance. They're not using QKC mainchain, hence you can't get access the coins you're mining until Binance changes the protocol. At least that's what they told me few months back. Now the coins I've mined are "in the air".

Nightworker88

newbie

Activity: 64

Merit: 0

Hello, would need some help mining Quarkchain QKC

PhoenixMiner working well for me for a long time and this is not my problem.

i took from binance a QKC address, write in miner, mining on qkc.ontopool.com. all was working without issues for hours.

So now the problem: qkc address from binance - and never had issues when i took for testing one address from them - looks like "xyz"

BUT ontopool "makes" from it "xyz000000" - all other mining adresses there also look like this! - so i have coins on "xyz00000" but cannot take them, ok its maybe 2$, so not worth

but what i make wrong?

THX

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: Dowper_ on April 07, 2020, 12:36:05 PM

We need miner update for newest drivers!

Unfortunately, looks like project dropped. Author didn't appeared here from 22 january 2020.

Binary100100

member

Activity: 180

Merit: 10

Quote from: MireNS on April 05, 2020, 04:57:33 AM

I can't fix Inccorect ETH share from GPU and geting around 50% stales on my RX 5700(not XT) in Phoenixminer 4.9c. I got stability and GPU temp around 60 C but this is anoing rly

Here is my setup file:
-pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555
-wal
-worker test1
-tt 62
-cvddc 750
-cclock 13000
-fanmin 0
-mclock 910
-amd
-acm
-mi 12
-gt 126
-mode 1
-clKernel 1
-clNew 1
-clf 0
-lidag 1
-openclLocalWork 128
-openclGlobalMultiplier 4096
pause

Pls some1 help me or I will kill this GPU

My print scr: https://ibb.co/SxkmtYf

Ummm... confirm your -cclock again?
I'm no expert but 13000 seems a little high. Maybe 1300 would be better.

And as the other said, ditch -openclLocalWork 128 -openclGlobalMultiplier 4096

Semtex72

newbie

Activity: 55

Merit: 0

Quote from: Dowper_ on April 07, 2020, 12:36:05 PM

We need miner update for newest drivers!

Yes, hoping for it. I can only make 5x rx 5700 cards run properly for the moment.

Dowper_

member

Activity: 221

Merit: 12

We need miner update for newest drivers!

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: commandera on April 07, 2020, 07:00:03 AM

i have error
i just added new gpu and reinstalled driver

gpu6: cEnqueueWriteBuffer (-4)

gpu7: cEnqueueWriteBuffer (-4)

threads not responding, restarting

what happen ?

Increase size of pagefile. Add to it's current size summary amount of videomemory size of new gpus.

commandera

member

Activity: 243

Merit: 71

i have error
i just added new gpu and reinstalled driver

gpu6: cEnqueueWriteBuffer (-4)

gpu7: cEnqueueWriteBuffer (-4)

threads not responding, restarting

what happen ?

MireNS

newbie

Activity: 6

Merit: 0

Quote from: UnclWish on April 05, 2020, 05:35:07 AM

Quote from: MireNS on April 05, 2020, 05:33:58 AM

20.3.1 for now,tested one befor and had same problem

Try to remove options
-openclLocalWork 128
-openclGlobalMultiplier 4096

did like Uncl sad remove that 2 lines and dont get any errors and got stabil speed of 50Mhs at power of 114w for now,time to play now whit setings:)

bategojko74

member

Activity: 220

Merit: 12

Quote from: Binary100100 on April 05, 2020, 11:40:59 AM

Quote from: br2459 on April 05, 2020, 09:38:44 AM

Quote from: UnclWish on April 05, 2020, 05:35:07 AM

Quote from: MireNS on April 05, 2020, 05:33:58 AM

20.3.1 for now,tested one befor and had same problem

Try to remove options
-openclLocalWork 128
-openclGlobalMultiplier 4096

I use -openclLocalWork 32 and don't get incorrect shares. I have been down this path and no matter what you do, you will always get incorrect shares with the value higher than 32.

I don't see any difference at all when using -openclLocalWork 32.

For the older cards (RX470/480/570/580) the default openclLocalWork is 64 and you will get incorrect shares for higher than the default 64 value. For the NAVI cards like RX5700(XT) the default openclLocalWork is 32 and you will get incorrect shares for higher than the default 32 value.

Binary100100

member

Activity: 180

Merit: 10

Quote from: br2459 on April 05, 2020, 09:38:44 AM

Quote from: UnclWish on April 05, 2020, 05:35:07 AM

Quote from: MireNS on April 05, 2020, 05:33:58 AM

20.3.1 for now,tested one befor and had same problem

Try to remove options
-openclLocalWork 128
-openclGlobalMultiplier 4096

I use -openclLocalWork 32 and don't get incorrect shares. I have been down this path and no matter what you do, you will always get incorrect shares with the value higher than 32.

I don't see any difference at all when using -openclLocalWork 32.

br2459

full member

Activity: 269

Merit: 102

Quote from: UnclWish on April 05, 2020, 05:35:07 AM

Quote from: MireNS on April 05, 2020, 05:33:58 AM

20.3.1 for now,tested one befor and had same problem

Try to remove options
-openclLocalWork 128
-openclGlobalMultiplier 4096

I use -openclLocalWork 32 and don't get incorrect shares. I have been down this path and no matter what you do, you will always get incorrect shares with the value higher than 32.

MireNS

newbie

Activity: 6

Merit: 0

kk testing now will see. ty wm

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: MireNS on April 05, 2020, 05:33:58 AM

20.3.1 for now,tested one befor and had same problem

Try to remove options
-openclLocalWork 128
-openclGlobalMultiplier 4096

MireNS

newbie

Activity: 6

Merit: 0

20.3.1 for now,tested one befor and had same problem

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: MireNS on April 05, 2020, 04:57:33 AM

I can't fix Inccorect ETH share from GPU and geting around 50% stales on my RX 5700(not XT) in Phoenixminer 4.9c. I got stability and GPU temp around 60 C but this is anoing rly

Here is my setup file:
-pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555
-wal
-worker test1
-tt 62
-cvddc 750
-cclock 13000
-fanmin 0
-mclock 910
-amd
-acm
-mi 12
-gt 126
-mode 1
-clKernel 1
-clNew 1
-clf 0
-lidag 1
-openclLocalWork 128
-openclGlobalMultiplier 4096
pause

Pls some1 help me or I will kill this GPU

My print scr: https://ibb.co/SxkmtYf

What drivers? 20.4.1? Install 20.3.1

MireNS

newbie

Activity: 6

Merit: 0

I can't fix Inccorect ETH share from GPU and geting around 50% stales on my RX 5700(not XT) in Phoenixminer 4.9c. I got stability and GPU temp around 60 C but this is anoing rly

Here is my setup file:
-pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555
-wal
-worker test1
-tt 62
-cvddc 750
-cclock 13000
-fanmin 0
-mclock 910
-amd
-acm
-mi 12
-gt 126
-mode 1
-clKernel 1
-clNew 1
-clf 0
-lidag 1
-openclLocalWork 128
-openclGlobalMultiplier 4096
pause

Pls some1 help me or I will kill this GPU

My print scr: https://ibb.co/SxkmtYf

Semtex72

newbie

Activity: 55

Merit: 0

Quote from: hustleman on April 04, 2020, 02:40:13 PM

Quote from: karim_hassan777 on April 04, 2020, 12:55:31 PM

what is the best settings mining on RX 5700 ?

Thats to broad of a question. Each 5700 is different and can handle more or less OC/UV. So what brand and model do you have?

Question to you would be are these stock 5700 or 5700xt?

Have you flashed the xt bios onto a 5700 if it is base model?

Have you modded the bios (copied 1500 straps on down)?

None modded 5700 is usually good at 1175 core, 750 v, 1800 memory, 850 v

modded 5700xt is usually good at 1300 core, 775 v, 1800-1820memory, 850 v

That will give you a starting point, u can make adjustments based on if you card can handle those settings without crashing or a bunch of stale shares.

What Mobo are you using?

Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 287. (Read 784965 times)