PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 449.

Marvell2

full member

Activity: 1148

Merit: 132

Quote from: Omg9500 on March 13, 2018, 03:12:40 PM

Quote from: Metroid on March 13, 2018, 02:55:46 PM

PhoenixMiner 2.7c compared to claymore 11.4 on eth solo mining is so much better, very stable and lowest devfee. Trust me, at moment, your hashrate will be bigger with this miner than claymore and this is not marketing.

I disagree and the figures are the reason why I moved back to claymore. Phoenix on my 13 card rig was 397 mh/s and claymore 398.5 mh/s and then the big difference is dualmining and claymore gives me an additional 11699 mh/s on Decred.

ppl are complaining about lots of stale shares on claymore tho

Omg9500

newbie

Activity: 112

Merit: 0

Quote from: Metroid on March 13, 2018, 02:55:46 PM

PhoenixMiner 2.7c compared to claymore 11.4 on eth solo mining is so much better, very stable and lowest devfee. Trust me, at moment, your hashrate will be bigger with this miner than claymore and this is not marketing.

I disagree and the figures are the reason why I moved back to claymore. Phoenix on my 13 card rig was 397 mh/s and claymore 398.5 mh/s and then the big difference is dualmining and claymore gives me an additional 11699 mh/s on Decred.

Metroid

sr. member

Activity: 2142

Merit: 353

Xtreme Monster

PhoenixMiner 2.7c compared to claymore 11.4 on eth solo mining is so much better, very stable and lowest devfee. Trust me, at moment, your hashrate will be bigger with this miner than claymore and this is not marketing.

Tranzius

newbie

Activity: 20

Merit: 0

Quote from: gsrcrxsi314 on March 13, 2018, 12:05:45 PM

Quote from: Digital_Seytan on March 13, 2018, 10:53:16 AM

2.7c crashes every so often for me, and just yesterday my virus program deleted the executable so I've gone back to 2.6. sofar phoenixminer 2.6 is te best version and verry high hashes

Huh

your rig isn't stable. It's not Phoenix's fault.

over 200hrs straight and counting on my 8GPU rig. 2.7c

I have also 200+ hours of nonstop mining on both AMD and Nvidia rigs.. So really good.

Appreaciated SSL connection..So far OK.

gsrcrxsi314

member

Activity: 367

Merit: 34

Quote from: Digital_Seytan on March 13, 2018, 10:53:16 AM

2.7c crashes every so often for me, and just yesterday my virus program deleted the executable so I've gone back to 2.6. sofar phoenixminer 2.6 is te best version and verry high hashes

Huh

your rig isn't stable. It's not Phoenix's fault.

over 200hrs straight and counting on my 8GPU rig. 2.7c

KGV

newbie

Activity: 55

Merit: 0

Quote from: BennyT on March 13, 2018, 08:16:27 AM

Just ran a 12 hour experiment on the exact same 1060 rigs.

Average shares per hour:

Claymore 11.4: 152
Phoenix 2.6: 174

Extrapolated over the month, Phoenix provides 0.08 more ETH over Claymore.

2.7c crashes every so often for me, and just yesterday my virus program deleted the executable so I've gone back to 2.6.

0.08 it's about - 56 USD now
Dual with XVG gives me 500+USD extra per month. Even including all this fees from claymore.
So this miner is useless before dual will be added.

Digital_Seytan

jr. member

Activity: 222

Merit: 2

[email protected]

2.7c crashes every so often for me, and just yesterday my virus program deleted the executable so I've gone back to 2.6. sofar phoenixminer 2.6 is te best version and verry high hashes

Huh

Omg9500

newbie

Activity: 112

Merit: 0

Benny, from where do you take your reading? From the pool or from the claymore/phoenix miner running on your rig?

BennyT

full member

Activity: 259

Merit: 108

Just ran a 12 hour experiment on the exact same 1060 rigs.

Average shares per hour:

Claymore 11.4: 152
Phoenix 2.6: 174

Extrapolated over the month, Phoenix provides 0.08 more ETH over Claymore.

2.7c crashes every so often for me, and just yesterday my virus program deleted the executable so I've gone back to 2.6.

RYXES

member

Activity: 140

Merit: 10

Merit me or don't.

Quote from: aneumoin on March 13, 2018, 06:16:20 AM

Quote

My calculation, given all things even, is you might get 12 to 15 shares per hour.
15 would probably be the max.

Edit:
But you will need to run at least 24 hours to possibly see that rate.

claymor 9.7 found 13-15 shares per hour.

You know there is Claymore 11.4 now? Wink

aneumoin

newbie

Activity: 8

Merit: 0

Quote

My calculation, given all things even, is you might get 12 to 15 shares per hour.
15 would probably be the max.

Edit:
But you will need to run at least 24 hours to possibly see that rate.

claymor 9.7 found 13-15 shares per hour.

cryptoillusion1

newbie

Activity: 82

Merit: 0

Quote from: carlotech on March 12, 2018, 11:01:10 PM

connected via lan cable.
how to use insert code. nothing works for me on that code?

when you click on the # button you will see "code" and "/code" - insert you text between these two and when you post it will show up the code window.

I see you used -ftime 10 in your bat file.... shouldn't it be -ftimeout ? also the 10 may be too less, just remove it and see if it works

carlotech

member

Activity: 92

Merit: 10

connected via lan cable.
how to use insert code. nothing works for me on that code?

cryptoillusion1

newbie

Activity: 82

Merit: 0

Quote from: carlotech on March 12, 2018, 09:49:17 PM

Phoneix Miner 2.6 Windows/msvc - Release
----------------------------------------

Code:

Phoneix Miner 2.6 Windows/msvc - Release
----------------------------------------

The following options are not supported and are ignored:
-mode
No CUDA driver found
Available GPUs for mining:
GPU1: Radeon RX 580 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU2: Radeon RX 580 Series (pcie 2), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU3: Radeon RX 580 Series (pcie 3), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU4: Radeon RX 580 Series (pcie 4), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU5: Radeon RX 580 Series (pcie 5), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU6: Radeon RX 580 Series (pcie 7), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU7: Radeon RX 580 Series (pcie Cool, OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU8: Radeon RX 580 Series (pcie 9), OpenCL 2.0, 8 GB VRAM, 36 CUs
Listening for CDM remote manager at port 3333 in read-only mode
Eth: the pool list contains 5 pools
Eth: primary pool: eth-asia1.nanopool.org:9999
Eth: Connecting to ethash pool eth-asia1.nanopool.org:9999
Eth: Connected to ethash pool eth-asia1.nanopool.org:9999 (103.3.62.64)
Eth: Starting GPU mining
Eth: Connection closed by the pool
Eth: Reconnecting in 20 seconds...

Select pool (press key from 0 to 4)
* 0. eth-asia1.nanopool.org:9999
1. eth-eu1.nanopool.org:9999
2. eth-eu2.nanopool.org:9999
3. eth-us-east1.nanopool.org:9999
4. eth-us-west1.nanopool.org:9999

Eth: Switching to pool: eth-us-west1.nanopool.org:9999
Eth: Reconnecting in 20 seconds...
GPU1: 37C 85%, GPU2: 38C 85%, GPU3: 34C 85%, GPU4: 34C 85%, GPU5: 36C 85%, GPU6: 35C 85%, GPU7: 36C 85%, GPU8: 36C 85%
Eth: Connecting to ethash pool eth-us-west1.nanopool.org:9999
Eth: Connected to ethash pool eth-us-west1.nanopool.org:9999 (207.246.100.198)
Eth: Connection closed by the pool
Eth: Reconnecting in 20 seconds...
Reloading epools.txt
Eth: the pool list contains 5 pools
Eth: primary pool: eth-asia1.nanopool.org:9999
Eth: Reconnecting in 20 seconds...
GPU1: 37C 85%, GPU2: 38C 85%, GPU3: 34C 85%, GPU4: 34C 85%, GPU5: 35C 85%, GPU6: 35C 85%, GPU7: 37C 85%, GPU8: 36C 85%
Eth: Connecting to ethash pool eth-asia1.nanopool.org:9999
Eth: Connected to ethash pool eth-asia1.nanopool.org:9999 (103.3.62.64)
Eth: Connection closed by the pool
Eth: Reconnecting in 20 seconds...

Select pool (press key from 0 to 4)
* 0. eth-asia1.nanopool.org:9999
1. eth-eu1.nanopool.org:9999
2. eth-eu2.nanopool.org:9999
3. eth-us-east1.nanopool.org:9999
4. eth-us-west1.nanopool.org:9999

Eth: Switching to pool: eth-us-east1.nanopool.org:9999
Eth: Reconnecting in 20 seconds...
GPU1: 37C 85%, GPU2: 38C 85%, GPU3: 34C 85%, GPU4: 34C 85%, GPU5: 35C 85%, GPU6: 36C 85%, GPU7: 37C 85%, GPU8: 36C 85%
Eth: Connecting to ethash pool eth-us-east1.nanopool.org:9999
Eth: Connected to ethash pool eth-us-east1.nanopool.org:9999 (192.99.69.170)
Eth: Connection closed by the pool
Eth: Reconnecting in 20 seconds...

C:\Users\PC\Desktop\PhoenixMiner_2.7c\PhoenixMiner_2.7c>PhoenixMiner.exe -epool eth-asia1.nanopool.org:9999 -ewal 0x3b824aabece5fcb9f098fd454e538f877702a05a.miner1/[email protected] -epsw x -mode 1 -ftime 10
Phoneix Miner 2.7c Windows/msvc - Release
-----------------------------------------

The following options are not supported and are ignored:
-mode
No CUDA driver found
Available GPUs for mining:
GPU1: Radeon RX 580 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU2: Radeon RX 580 Series (pcie 2), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU3: Radeon RX 580 Series (pcie 3), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU4: Radeon RX 580 Series (pcie 4), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU5: Radeon RX 580 Series (pcie 5), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU6: Radeon RX 580 Series (pcie 7), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU7: Radeon RX 580 Series (pcie Cool, OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU8: Radeon RX 580 Series (pcie 9), OpenCL 2.0, 8 GB VRAM, 36 CUs
Listening for CDM remote manager at port 3333 in read-only mode
Eth: the pool list contains 3 pools
Eth: primary pool: eth-asia1.nanopool.org:9999
Starting GPU mining
Eth: Connecting to ethash pool eth-asia1.nanopool.org:9999 (proto: EthProxy)
Eth: Connected to ethash pool eth-asia1.nanopool.org:9999 (103.3.62.64)
GPU1: 37C 85%, GPU2: 38C 85%, GPU3: 34C 85%, GPU4: 34C 85%, GPU5: 36C 85%, GPU6: 35C 85%, GPU7: 36C 85%, GPU8: 35C 85%
Eth: Connection closed by the pool
Eth: Reconnecting in 20 seconds...
Eth: Connecting to ethash pool eth-asia1.nanopool.org:9999 (proto: EthProxy)
Eth: Connected to ethash pool eth-asia1.nanopool.org:9999 (103.3.62.64)
Eth: Connection closed by the pool
Eth: Reconnecting in 20 seconds...
GPU1: 37C 85%, GPU2: 38C 85%, GPU3: 34C 85%, GPU4: 34C 85%, GPU5: 35C 85%, GPU6: 36C 85%, GPU7: 36C 85%, GPU8: 36C 85%
Eth: Connecting to ethash pool eth-asia1.nanopool.org:9999 (proto: EthProxy)
Eth: Connected to ethash pool eth-asia1.nanopool.org:9999 (103.3.62.64)
Eth: Connection closed by the pool
Eth: Giving up after 3 retries, switching to next pool
Eth: Reconnecting in 10 seconds...

any help from phoenix team?
2.6 and 2.7c
everything is working until it stops getting shares from the pool. tia

Could you please use the "Insert code" button- click the # button and put your logs into it- that way the whole page will not be hogged -as I have done it

I see 'Connection closed by the pool'- are you connecting it on wifi ?- it has happened to me in the past on wifi so I had to connect it via LAN

carlotech

member

Activity: 92

Merit: 10

Phoneix Miner 2.6 Windows/msvc - Release
----------------------------------------

The following options are not supported and are ignored:
-mode
No CUDA driver found
Available GPUs for mining:
GPU1: Radeon RX 580 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU2: Radeon RX 580 Series (pcie 2), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU3: Radeon RX 580 Series (pcie 3), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU4: Radeon RX 580 Series (pcie 4), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU5: Radeon RX 580 Series (pcie 5), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU6: Radeon RX 580 Series (pcie 7), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU7: Radeon RX 580 Series (pcie Cool

, OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU8: Radeon RX 580 Series (pcie 9), OpenCL 2.0, 8 GB VRAM, 36 CUs
Listening for CDM remote manager at port 3333 in read-only mode
Eth: the pool list contains 5 pools
Eth: primary pool: eth-asia1.nanopool.org:9999
Eth: Connecting to ethash pool eth-asia1.nanopool.org:9999
Eth: Connected to ethash pool eth-asia1.nanopool.org:9999 (103.3.62.64)
Eth: Starting GPU mining
Eth: Connection closed by the pool
Eth: Reconnecting in 20 seconds...

Select pool (press key from 0 to 4)
* 0. eth-asia1.nanopool.org:9999
  1. eth-eu1.nanopool.org:9999
  2. eth-eu2.nanopool.org:9999
  3. eth-us-east1.nanopool.org:9999
  4. eth-us-west1.nanopool.org:9999

Eth: Switching to pool: eth-us-west1.nanopool.org:9999
Eth: Reconnecting in 20 seconds...
GPU1: 37C 85%, GPU2: 38C 85%, GPU3: 34C 85%, GPU4: 34C 85%, GPU5: 36C 85%, GPU6: 35C 85%, GPU7: 36C 85%, GPU8: 36C 85%
Eth: Connecting to ethash pool eth-us-west1.nanopool.org:9999
Eth: Connected to ethash pool eth-us-west1.nanopool.org:9999 (207.246.100.198)
Eth: Connection closed by the pool
Eth: Reconnecting in 20 seconds...
Reloading epools.txt
Eth: the pool list contains 5 pools
Eth: primary pool: eth-asia1.nanopool.org:9999
Eth: Reconnecting in 20 seconds...
GPU1: 37C 85%, GPU2: 38C 85%, GPU3: 34C 85%, GPU4: 34C 85%, GPU5: 35C 85%, GPU6: 35C 85%, GPU7: 37C 85%, GPU8: 36C 85%
Eth: Connecting to ethash pool eth-asia1.nanopool.org:9999
Eth: Connected to ethash pool eth-asia1.nanopool.org:9999 (103.3.62.64)
Eth: Connection closed by the pool
Eth: Reconnecting in 20 seconds...

Select pool (press key from 0 to 4)
* 0. eth-asia1.nanopool.org:9999
  1. eth-eu1.nanopool.org:9999
  2. eth-eu2.nanopool.org:9999
  3. eth-us-east1.nanopool.org:9999
  4. eth-us-west1.nanopool.org:9999

Eth: Switching to pool: eth-us-east1.nanopool.org:9999
Eth: Reconnecting in 20 seconds...
GPU1: 37C 85%, GPU2: 38C 85%, GPU3: 34C 85%, GPU4: 34C 85%, GPU5: 35C 85%, GPU6: 36C 85%, GPU7: 37C 85%, GPU8: 36C 85%
Eth: Connecting to ethash pool eth-us-east1.nanopool.org:9999
Eth: Connected to ethash pool eth-us-east1.nanopool.org:9999 (192.99.69.170)
Eth: Connection closed by the pool
Eth: Reconnecting in 20 seconds...

Phoneix Miner 2.7c Windows/msvc - Release
-----------------------------------------

The following options are not supported and are ignored:
  -mode
No CUDA driver found
Available GPUs for mining:
GPU1: Radeon RX 580 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU2: Radeon RX 580 Series (pcie 2), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU3: Radeon RX 580 Series (pcie 3), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU4: Radeon RX 580 Series (pcie 4), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU5: Radeon RX 580 Series (pcie 5), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU6: Radeon RX 580 Series (pcie 7), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU7: Radeon RX 580 Series (pcie Cool

, OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU8: Radeon RX 580 Series (pcie 9), OpenCL 2.0, 8 GB VRAM, 36 CUs
Listening for CDM remote manager at port 3333 in read-only mode
Eth: the pool list contains 3 pools
Eth: primary pool: eth-asia1.nanopool.org:9999
Starting GPU mining
Eth: Connecting to ethash pool eth-asia1.nanopool.org:9999 (proto: EthProxy)
Eth: Connected to ethash pool eth-asia1.nanopool.org:9999 (103.3.62.64)
GPU1: 37C 85%, GPU2: 38C 85%, GPU3: 34C 85%, GPU4: 34C 85%, GPU5: 36C 85%, GPU6: 35C 85%, GPU7: 36C 85%, GPU8: 35C 85%
Eth: Connection closed by the pool
Eth: Reconnecting in 20 seconds...
Eth: Connecting to ethash pool eth-asia1.nanopool.org:9999 (proto: EthProxy)
Eth: Connected to ethash pool eth-asia1.nanopool.org:9999 (103.3.62.64)
Eth: Connection closed by the pool
Eth: Reconnecting in 20 seconds...
GPU1: 37C 85%, GPU2: 38C 85%, GPU3: 34C 85%, GPU4: 34C 85%, GPU5: 35C 85%, GPU6: 36C 85%, GPU7: 36C 85%, GPU8: 36C 85%
Eth: Connecting to ethash pool eth-asia1.nanopool.org:9999 (proto: EthProxy)
Eth: Connected to ethash pool eth-asia1.nanopool.org:9999 (103.3.62.64)
Eth: Connection closed by the pool
Eth: Giving up after 3 retries, switching to next pool
Eth: Reconnecting in 10 seconds...

any help from phoenix team?
2.6 and 2.7c
everything is working until it stops getting shares from the pool. tia

aurus33

newbie

Activity: 20

Merit: 0

Quote from: skinnyfalcon on March 12, 2018, 07:57:31 PM

@PhoenixMiner

During the process of optimizing the OC settings I discovered the following bug:

After mining stable for a while the miner was stopped,
in the process of changing the memory clock setting from

-mclock 2150,2150,2150,2200,2125,2200,2150,2150

to

-mclock 2150,2150,2150,2200,2150,2200,2150,2150

and restarting the miner, the hash rate for GPU5 showed no change as a result of the clock increase. However, when the rig was rebooted, the hash rate now reflected the clock change.

It would appear that restarting the miner after setting changes (in this case the miner clock, may be true for other parameters as well) does not apply these changes (write to the hardware). Only rebooting Windows affected the change.

I am running:
Windows 10 1709
AMD 18.3.1
8 x RX580 8 GB

Try OverdriveNTool to wipe the profiles and memory settings before starting your miner, it works quite well

skinnyfalcon

newbie

Activity: 49

Merit: 0

@PhoenixMiner

During the process of optimizing the OC settings I discovered the following bug:

After mining stable for a while the miner was stopped,
in the process of changing the memory clock setting from

-mclock 2150,2150,2150,2200,2125,2200,2150,2150

to

-mclock 2150,2150,2150,2200,2150,2200,2150,2150

and restarting the miner, the hash rate for GPU5 showed no change as a result of the clock increase. However, when the rig was rebooted, the hash rate now reflected the clock change.

It would appear that restarting the miner after setting changes (in this case the miner clock, may be true for other parameters as well) does not apply these changes (write to the hardware). Only rebooting Windows affected the change.

I am running:
Windows 10 1709
AMD 18.3.1
8 x RX580 8 GB

janding

jr. member

Activity: 170

Merit: 6

Quote from: cryptoillusion1 on March 12, 2018, 04:24:36 PM

Quote from: aneumoin on March 12, 2018, 05:34:03 AM

PhoenixMiner 2.7c
1050TI
last nvidia driver

C:\Miner\PhoenixMiner>PhoenixMiner.exe -pool asia.ethash-hub.miningpoolhub.com:20535 -wal aneumoin.eth1 -pass x -proto 1 -mi 12 -log 0
Phoneix Miner 2.7c Windows/msvc - Release
-----------------------------------------

ximum difficulty of found share: 10.6 GH (!)
Eth: Average speed (5 min): 15.798 MH/s
Eth: Effective speed: 2.72 MH/s; at pool: 2.72 MH/s
Eth: New job #d7ebe235 from asia.ethash-hub.miningpoolhub.com:20535; diff: 4300MH
Eth speed: 16.488 MH/s, shares: 1/0/0, time: 0:26

does not find shares.
Switching pools does not help
such a situation the last few days
why so little shares finds?
15.8 MH/s the speed is quite sufficient

Code:

Next time could you please use the "insert code"- the button with the "#" to include long posts like this- so that the whole page is not hogged by your post

it should look like this below

Code:

Next time could you please use the "insert code"- the button with the "#" to include long posts like this- so that the whole page is not hogged by your post

15.8MH/s is not too high a hash rate so i doubt if you can get a lot of hashes- of course it also depends on the luck and difficulty at that time
I see that you did get one share - you will need to wait more time to get shares at this low hash rate

My calculation, given all things even, is you might get 12 to 15 shares per hour.
15 would probably be the max.

Edit:
But you will need to run at least 24 hours to possibly see that rate.

cryptoillusion1

newbie

Activity: 82

Merit: 0

Quote from: aneumoin on March 12, 2018, 05:34:03 AM

PhoenixMiner 2.7c
1050TI
last nvidia driver

C:\Miner\PhoenixMiner>PhoenixMiner.exe -pool asia.ethash-hub.miningpoolhub.com:20535 -wal aneumoin.eth1 -pass x -proto 1 -mi 12 -log 0
Phoneix Miner 2.7c Windows/msvc - Release
-----------------------------------------

ximum difficulty of found share: 10.6 GH (!)
Eth: Average speed (5 min): 15.798 MH/s
Eth: Effective speed: 2.72 MH/s; at pool: 2.72 MH/s
Eth: New job #d7ebe235 from asia.ethash-hub.miningpoolhub.com:20535; diff: 4300MH
Eth speed: 16.488 MH/s, shares: 1/0/0, time: 0:26

does not find shares.
Switching pools does not help
such a situation the last few days
why so little shares finds?
15.8 MH/s the speed is quite sufficient

Code:

Next time could you please use the "insert code"- the button with the "#" to include long posts like this- so that the whole page is not hogged by your post

it should look like this below

Code:

Next time could you please use the "insert code"- the button with the "#" to include long posts like this- so that the whole page is not hogged by your post

15.8MH/s is not too high a hash rate so i doubt if you can get a lot of hashes- of course it also depends on the luck and difficulty at that time
I see that you did get one share - you will need to wait more time to get shares at this low hash rate

h55

member

Activity: 210

Merit: 11

Quote from: PhoenixMiner on December 26, 2017, 02:14:26 AM

Changes in version 2.7c (since 2.6):
.

Introducing the appropriate graphics card for Ethereum Extraction

Here are four powerful graphics cards that are commonly used for Ethereum Mining:
Radeon R9 295X2
Radeon R9 HD 7990
Radeon RX 480
Radeon RX 470

The Radeon R9 295X2 has the highest hash (46.0 MH / s) between Ethereal graphics on the market and its price is around $ 600. With an electric power of about $ 1.4 a day, it costs around $ 1.61 per day, each with a net profit.
The above are just the graphics cards that are usually used, so you can use a variety of stronger or even weaker graphics cards.Apart from the other hardware needed for the hardware?The minimum requirements are as follows: 64-bit Windows operating system (preferably Windows 10) A motherboard with a PCI-E slot to cover multiple concurrent graphics Power (Power) suitable for power control A simple CPU (preferably i3 core up) and at least 4GB of RAM

Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 449. (Read 784954 times)