Here is a summery based on my test (8xRX580 8GB):
PhoenixMiner Claymore
228MH/s 225MH/s Adv Phoenix
0.65% Devfee 1-1.5% Devfee Adv Phoenix
Stability Adv Pheonix
Power consumption Adv Claymore
Fan control Adv Claymore
Userbase Adv Calymore
These are the most pertinent parameters impacting the bottom line.
Feel free to add more. Hope this helps people to decide.
Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 451. (Read 784877 times)
March 11, 2018, 09:23:37 PM
March 11, 2018, 04:49:00 PM
A bit more fast claymore 11.3 now
So the Calymore 11.3 is faster than the 2.7C?
Sure, Rig with 8 rx580 : Phoenix 2.7c 245,4 mh/s and Clay 11.3 246,1
faster yes, but I am getting more stale shares. CPU usage has reduced considerably.
March 11, 2018, 02:31:59 PM
48Hs mining and counting with 2.7C, average speed for the last 24H is 88.1MH/s (from pool) while using the computer (web, music, videos...) from time to time.
89.1MH/s since the start of these 48Hs.
GPUs are 3X RX570 4GB.
89.1MH/s since the start of these 48Hs.
GPUs are 3X RX570 4GB.
March 11, 2018, 02:08:57 PM
You are right. Sorry, I have 18.3.1 installed. Yes the old Blockchain driver has the 8 card limit which the drivers from 18. onwards don't have.
March 11, 2018, 01:03:41 PM
There is no such thing as a barrier in WIN10. That used to be implemented in the drivers. You need upto date win10 (1709), latest AMD drivers (18.2.3 Feb. 2018) - install ONLY driver!, compute mode switcher (https://bitcointalksearch.org/topic/tool-amd-compute-switcher-for-switch-automatically-to-compute-mode-2815803), a max number of 13 similar cards and a mainboard with enough PCIE slots. Then you're good to go. My rig with 13 cards works flawlessly and the output is close to 400 mh/s on ETH/nanopool. no probs at all.
The 13 card barrier is because of the BIOS of my mainboard (Asus B250 expert mining). Power draw on the wall is 1750 watt for the rig including monitor (my rig is like an open cube built with aluminum profiles, with wheels and inside with 3 rows of cards on top of each other).
So after reading through everything, it would appear the problem lies with the AMD driver. I am using the AMD blockchain driver, and apparently that will not work with more than 8 GPUs (cause Windows to not boot up, kind of dumb given that mining is the only reason why multiple GPUs are needed in the first place.). Guess I have to uninstall the AMD blockchain driver and re-install the 18.3.1 (there is no 18.2.3, it goes from 12.8.1 to 12.3.1)standard driver (and switch to compute), and see if this works.
March 11, 2018, 10:12:16 AM
Hi developers PhoenixMiner! Is it possible to implement the function of switching between the primary and backup pool in time? for example every 2 hours to switch for 30 minutes to another pool with another purse?
It would be very easy to implement it using batch or powershell. Run first command line, set a timer to kill the process, run the second command line, set a second timer, repeat.
March 11, 2018, 08:25:07 AM
Please add Mix Coin to your available coins under the -coin feature. Thank you.
https://bitcointalksearch.org/topic/annmixpow-unstoppable-web-publication-the-new-web-mix-blockchain-2807568
https://bitcointalksearch.org/topic/annmixpow-unstoppable-web-publication-the-new-web-mix-blockchain-2807568
March 11, 2018, 06:08:39 AM
Hi developers PhoenixMiner! Is it possible to implement the function of switching between the primary and backup pool in time? for example every 2 hours to switch for 30 minutes to another pool with another purse?
March 11, 2018, 05:58:46 AM
A bit more fast claymore 11.3 now
So the Calymore 11.3 is faster than the 2.7C?
Sure, Rig with 8 rx580 : Phoenix 2.7c 245,4 mh/s and Clay 11.3 246,1
It means Claymore 11.3 about 0.285 % faster than Phoenix 2.7c. But if you deduct that 0.285% with 0.35% (Phoenix's fee only 0.65% compare to Claymore's 1% fee), then you get (minus) -0.065%.
Still prefer Phoenix.
Btw; on my GTX 1070 Ti, Phoenix 2.7c still around 0.74% faster than Claymore 11.3. If you add that 0.74% with 0.35%, you get around (plus) 1%.
Still prefer Phoenix.
Just my test and dumb calculation.
March 11, 2018, 05:22:49 AM
A bit more fast claymore 11.3 now
So the Calymore 11.3 is faster than the 2.7C?
Sure, Rig with 8 rx580 : Phoenix 2.7c 245,4 mh/s and Clay 11.3 246,1
March 11, 2018, 05:12:46 AM
A bit more fast claymore 11.3 now
So the Calymore 11.3 is faster than the 2.7C?
March 11, 2018, 04:52:20 AM
A bit more fast claymore 11.3 now
March 11, 2018, 04:22:53 AM
I'm on W10PRO, latest drivers, etc... everything uptodate.
Of course I tried to lower OC and so on, without success.
What's in common with those 2 RIGS: having RX580 NITRO+ with HYNIX memory (1st rig with 12 of those cards, the others with 6 of them + 6 GTX).
Of course I tried to lower OC and so on, without success.
What's in common with those 2 RIGS: having RX580 NITRO+ with HYNIX memory (1st rig with 12 of those cards, the others with 6 of them + 6 GTX).
Quote from: Omg9500
Well I am on Win10 1709 and my Rig has 13 RX580. Running at total 398 mh/s on ETH/nanopool flawlessly.
Please enlighten me on how it is you were able to break the 8 AMD GPU barrier in Windows 10?
There is no such thing as a barrier in WIN10. That used to be implemented in the drivers. You need upto date win10 (1709), latest AMD drivers (18.2.3 Feb. 2018) - install ONLY driver!, compute mode switcher (https://bitcointalksearch.org/topic/tool-amd-compute-switcher-for-switch-automatically-to-compute-mode-2815803), a max number of 13 similar cards and a mainboard with enough PCIE slots. Then you're good to go. My rig with 13 cards works flawlessly and the output is close to 400 mh/s on ETH/nanopool. no probs at all.
The 13 card barrier is because of the BIOS of my mainboard (Asus B250 expert mining). Power draw on the wall is 1750 watt for the rig including monitor (my rig is like an open cube built with aluminum profiles, with wheels and inside with 3 rows of cards on top of each other).
March 11, 2018, 03:46:58 AM
Tested the newest Claymore, it gives 0.1-0.2MH/s more per RX card compared to Phoenix, possibly because of the intensity auto-tuning. ASM 2 gives further 0.2 per card as well.
March 11, 2018, 03:35:33 AM
I'm on W10PRO, latest drivers, etc... everything uptodate.
Of course I tried to lower OC and so on, without success.
What's in common with those 2 RIGS: having RX580 NITRO+ with HYNIX memory (1st rig with 12 of those cards, the others with 6 of them + 6 GTX).
Of course I tried to lower OC and so on, without success.
What's in common with those 2 RIGS: having RX580 NITRO+ with HYNIX memory (1st rig with 12 of those cards, the others with 6 of them + 6 GTX).
Quote from: Omg9500
Well I am on Win10 1709 and my Rig has 13 RX580. Running at total 398 mh/s on ETH/nanopool flawlessly.
Please enlighten me on how it is you were able to break the 8 AMD GPU barrier in Windows 10?
Since months now the 8 AMD GPU barrier does not more exist.... you can plug 13 of them without any trouble!
March 11, 2018, 03:07:08 AM
+1 for linux version.
Please PM me if you have beta version so I can work on implementation within nvOC and do some preliminary tests before implementing it in the next version of nvOC.
Thanks!
Please PM me if you have beta version so I can work on implementation within nvOC and do some preliminary tests before implementing it in the next version of nvOC.
Thanks!
March 11, 2018, 12:00:25 AM
I'm on W10PRO, latest drivers, etc... everything uptodate.
Of course I tried to lower OC and so on, without success.
What's in common with those 2 RIGS: having RX580 NITRO+ with HYNIX memory (1st rig with 12 of those cards, the others with 6 of them + 6 GTX).
Of course I tried to lower OC and so on, without success.
What's in common with those 2 RIGS: having RX580 NITRO+ with HYNIX memory (1st rig with 12 of those cards, the others with 6 of them + 6 GTX).
Quote from: Omg9500
Well I am on Win10 1709 and my Rig has 13 RX580. Running at total 398 mh/s on ETH/nanopool flawlessly.
Please enlighten me on how it is you were able to break the 8 AMD GPU barrier in Windows 10?
https://bitcointalk.org/index.php?topic=2302268.40
March 10, 2018, 10:30:30 PM
I have been testing this miner and so far it looks pretty stable in all fronts except fan settings which claymore still has the upper hand, for example -tt 60 -fanmax 90 on claymore works flawless, on this example, the miner will keep 90% fan speed until it hits 60c but it does not work like this on this miner. I wonder why.
March 10, 2018, 10:18:21 PM
Claymore 11.3 recently introduced a custom RX550 asm kernel
now I see this:
We also ordered an RX550 so there will be optimized kernels for it in the next release.
coincidence ?
now I see this:
We also ordered an RX550 so there will be optimized kernels for it in the next release.
coincidence ?
Hey, if you're a provider of a product it's only smart to keep up with whats happening with your competetion
and try to get ahead. Competition is good for everyone.
Claymore would't have been putting out these last few releases if it wasn't for PhoenixMiner.
March 10, 2018, 08:47:23 PM
Claymore 11.3 recently introduced a custom RX550 asm kernel
now I see this:
We also ordered an RX550 so there will be optimized kernels for it in the next release.
coincidence ?
now I see this:
We also ordered an RX550 so there will be optimized kernels for it in the next release.
coincidence ?
Jump to: