Can I mine other eth base coin, coz i tried to mine DBIX but it says that disconnecting to server... Am I missing something in my configuration?
My sample bat config..
PhoenixMiner.exe -pool stratum+tcp://beta-dbix.pool.sexy:10032 -wal 0xabc0419ec201fdccf5********* -epsw x -tt 65 -fanmin 55 -fanmax 90 -cclock 1130,1167,1130,1130,1130,1167,1167,1167,1167,1167,1167,1130 -mclock 2050,2100,2050,2050,2050,2100,2100,2100,2100,2100,2100,2050 -cvddc 850,820,850,850,850,820,820,820,820,820,820,850 -mvddc 850,820,850,850,850,820,820,820,820,820,820,850
Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 447. (Read 784954 times)
March 14, 2018, 11:23:24 PM
March 14, 2018, 10:19:40 PM
I have a weird thing, when mining PIRL I have 29mh/s but when I try to mine ETH Im getting 18mh/s. I tried ethermine and nanopool but nothing changed. Anyone got an idea ? I should get the same speed since its the same algorithm right ?
No, your hash rate will depend on the difficulty for a particular coin, Eth difficulty is way up there with BTC and LTC. Look at the difficulty level of Pirl compared to Eth.
difficulty of the coin has nothing to do with the hashrate for algo. PIRL and ETH both use dagger-hashimoto
@kkanoee which card is it? Most likely you've some settings messed up
March 14, 2018, 09:57:06 PM
I have a weird thing, when mining PIRL I have 29mh/s but when I try to mine ETH Im getting 18mh/s. I tried ethermine and nanopool but nothing changed. Anyone got an idea ? I should get the same speed since its the same algorithm right ?
No, your hash rate will depend on the difficulty for a particular coin, Eth difficulty is way up there with BTC and LTC. Look at the difficulty level of Pirl compared to Eth.
March 14, 2018, 07:27:08 PM
would it be possible to get a fresh compiled version straight from the owen, or is it possible to get the source code so i can compile myself?
i need a fresh version because i allways get problems with precompiled binaries and AV.
i need a fresh version because i allways get problems with precompiled binaries and AV.
March 14, 2018, 06:59:59 PM
I have a weird thing, when mining PIRL I have 29mh/s but when I try to mine ETH Im getting 18mh/s. I tried ethermine and nanopool but nothing changed. Anyone got an idea ? I should get the same speed since its the same algorithm right ?
March 14, 2018, 04:31:22 PM
Too high memory overclock makes all readings on GPU-Z or similar programs return no data. Restart the rig, check which GPU returns no temperature, dial down the overclock and try again.
Phoenix is slightly more intensive compared to Claymore with default intensity, so if you are on the edge of stability on Claymore - it might crash with Phoenix.
Phoenix is slightly more intensive compared to Claymore with default intensity, so if you are on the edge of stability on Claymore - it might crash with Phoenix.
Tried even a bit more than -20 on memory.
Getting this error:
wdog Hardware manager thread not responding
wdog Thread(s) not responding. Restarting.
March 14, 2018, 03:25:57 PM
Potential fix for the "debugger detected" error:
All I did was uninstall the AMD Aug23 BETA blockchain drivers and install the latest AMD Adrenaline drivers (18.3.1), switched GPUs to compute mode, OC as normal, and that fixed the "debugger detected" problem.
Getting +1.8Mh/s over latest Claymore.
Very happy.
March 14, 2018, 03:00:04 PM
Too high memory overclock makes all readings on GPU-Z or similar programs return no data. Restart the rig, check which GPU returns no temperature, dial down the overclock and try again.
Phoenix is slightly more intensive compared to Claymore with default intensity, so if you are on the edge of stability on Claymore - it might crash with Phoenix.
Phoenix is slightly more intensive compared to Claymore with default intensity, so if you are on the edge of stability on Claymore - it might crash with Phoenix.
Phoenix 2.7c crashes with the settings I have and with so many GPU's it will take lot of time to re-tune the clocks to match this program
Similar problem with claymore 11.2 to 11.4 but now Claymore has just released v11.5 with -oldkernel option which can be used in cases where they have problems with latest versions because they use hard OC and/or custom bioses created for old versions
any chance we can get a similar one for Phoenix so that there will not be need to change clock settings/bios mod
Drop the memory clock of all cards by 20MHz and try again. Not so hard.
Or just check the logs to see which GPU gives the temp error and reduce its clock.
March 14, 2018, 02:51:21 PM
Too high memory overclock makes all readings on GPU-Z or similar programs return no data. Restart the rig, check which GPU returns no temperature, dial down the overclock and try again.
Phoenix is slightly more intensive compared to Claymore with default intensity, so if you are on the edge of stability on Claymore - it might crash with Phoenix.
Phoenix is slightly more intensive compared to Claymore with default intensity, so if you are on the edge of stability on Claymore - it might crash with Phoenix.
Phoenix 2.7c crashes with the settings I have and with so many GPU's it will take lot of time to re-tune the clocks to match this program
Similar problem with claymore 11.2 to 11.4 but now Claymore has just released v11.5 with -oldkernel option which can be used in cases where they have problems with latest versions because they use hard OC and/or custom bioses created for old versions
any chance we can get a similar one for Phoenix so that there will not be need to change clock settings/bios mod
March 14, 2018, 12:20:26 PM
error 999 mostly with afterburner to high
March 14, 2018, 11:29:57 AM
Tried to use phoenix miner for the first time today, got 0,00 MHS for some reason
17604:04:37:09.590: main GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)
17604:04:37:30.157: main GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)
BAT: -pool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -wal nicehashwallet -pass x -proto 4 -stales 0 -amd
any ideas appreciated!
17604:04:37:09.590: main GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)
17604:04:37:30.157: main GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)
BAT: -pool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -wal nicehashwallet -pass x -proto 4 -stales 0 -amd
any ideas appreciated!
OK guys, I have found a solution - you have to disable GPU0 from device manager and start miner with 5 cards instead of 6.
You need either a monitor connected to the x16 GPU, an HDMI dummy plug, or use the iGPU of the motherboard. RX cards don't work on some motherboards without a monitor connected to the first card.
Thanks a lot, I will try!
March 14, 2018, 10:51:16 AM
Tried to use phoenix miner for the first time today, got 0,00 MHS for some reason
17604:04:37:09.590: main GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)
17604:04:37:30.157: main GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)
BAT: -pool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -wal nicehashwallet -pass x -proto 4 -stales 0 -amd
any ideas appreciated!
17604:04:37:09.590: main GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)
17604:04:37:30.157: main GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)
BAT: -pool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -wal nicehashwallet -pass x -proto 4 -stales 0 -amd
any ideas appreciated!
OK guys, I have found a solution - you have to disable GPU0 from device manager and start miner with 5 cards instead of 6.
You need either a monitor connected to the x16 GPU, an HDMI dummy plug, or use the iGPU of the motherboard. RX cards don't work on some motherboards without a monitor connected to the first card.
March 14, 2018, 10:40:09 AM
Tried to use phoenix miner for the first time today, got 0,00 MHS for some reason
17604:04:37:09.590: main GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)
17604:04:37:30.157: main GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)
BAT: -pool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -wal nicehashwallet -pass x -proto 4 -stales 0 -amd
any ideas appreciated!
17604:04:37:09.590: main GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)
17604:04:37:30.157: main GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)
BAT: -pool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -wal nicehashwallet -pass x -proto 4 -stales 0 -amd
any ideas appreciated!
OK guys, I have found a solution - you have to disable GPU0 from device manager and start miner with 5 cards instead of 6.
March 14, 2018, 10:12:38 AM
a few hours back pool shows that rig went offline but the miner still submit shares.
i've restarted the miner and still submit shares as usual but pool still doesn't show that.
been in touch with ethermine support but they insist that it wasn't a server side fault. still not sure if it was a pool or miner issue but till then, i'll continue using claymore.
i've restarted the miner and still submit shares as usual but pool still doesn't show that.
been in touch with ethermine support but they insist that it wasn't a server side fault. still not sure if it was a pool or miner issue but till then, i'll continue using claymore.
March 14, 2018, 09:51:03 AM
what the fuck is wrong with these people posting whole log content? you deserve to have lots of problems.
I just don´t know which row of text could provide clues for more experienced people to solve that issue.
you could just insert it like this:
Code:
a
s
d
f
g
s
s
d
f
d
s
d
f
f
g
d
s
s
d
d
f
f
f
d
d
f
f
f
f
d
s
d
f
g
s
s
d
f
d
s
d
f
f
g
d
s
s
d
d
f
f
f
d
d
f
f
f
f
d
so that its scrollable
March 14, 2018, 09:34:27 AM
Yes, that´s a reasonable question. It is a temporary solution. Right now ETH/BTC rate is relatively high - 0,076, so I "exchange" it right away for BTC.
High would be 0.7 eth to 1 btc, eth is at least 350% undervalued, eth's real value x btc is 0.3 right now.
Sorry I mean ETH/BTC of course (https://poloniex.com/exchange#btc_eth) - 0,075. In December 2017 it was even under 0,03 so that´s why currently I am mining on nicehash.
March 14, 2018, 09:22:44 AM
Yes, that´s a reasonable question. It is a temporary solution. Right now ETH/BTC rate is relatively high - 0,076, so I "exchange" it right away for BTC.
High would be 0.7 eth to 1 btc, eth is at least 350% undervalued, eth's real value x btc is 0.3 right now.
March 14, 2018, 08:53:38 AM
Tried to use phoenix miner for the first time today, got 0,00 MHS for some reason
1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)[/b]
17604:04:37:32.720: main GPU1: 32C 0%, GPU2: 25C 70%, GPU3: 23C 75%, GPU4: 21C 75%, GPU5: 26C 95%, GPU6: 37C 60%
BAT: -pool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -wal nicehashwallet -pass x -proto 4 -stales 0 -amd
any ideas appreciated!
1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)[/b]
17604:04:37:32.720: main GPU1: 32C 0%, GPU2: 25C 70%, GPU3: 23C 75%, GPU4: 21C 75%, GPU5: 26C 95%, GPU6: 37C 60%
BAT: -pool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -wal nicehashwallet -pass x -proto 4 -stales 0 -amd
any ideas appreciated!
Mind if I ask why you are mining on nicehash? I mean your earnings will be slightly less compared to any ethereum pool like nanopool and nicehash pays Bitcoin which is higher transaction fees....
Yes, that´s a reasonable question. It is a temporary solution. Right now ETH/BTC rate is relatively high - 0,076, so I "exchange" it right away for BTC. When eth/btc rate drops until let´s say, 0,05 or lower, I mine ETH coins and exchange then against BTC at higher rates, like it is now... I could do I manually of course, but don´t want to bother changing every 0,1 or 0,2 ETH for BTC. To withdraw money from mining, it has to be in BTC anyway..
March 14, 2018, 08:47:42 AM
what the fuck is wrong with these people posting whole log content? you deserve to have lots of problems.
I just don´t know which row of text could provide clues for more experienced people to solve that issue.
March 14, 2018, 08:20:23 AM
Tried to use phoenix miner for the first time today, got 0,00 MHS for some reason
1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)[/b]
17604:04:37:32.720: main GPU1: 32C 0%, GPU2: 25C 70%, GPU3: 23C 75%, GPU4: 21C 75%, GPU5: 26C 95%, GPU6: 37C 60%
BAT: -pool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -wal nicehashwallet -pass x -proto 4 -stales 0 -amd
any ideas appreciated!
1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)[/b]
17604:04:37:32.720: main GPU1: 32C 0%, GPU2: 25C 70%, GPU3: 23C 75%, GPU4: 21C 75%, GPU5: 26C 95%, GPU6: 37C 60%
BAT: -pool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -wal nicehashwallet -pass x -proto 4 -stales 0 -amd
any ideas appreciated!
Mind if I ask why you are mining on nicehash? I mean your earnings will be slightly less compared to any ethereum pool like nanopool and nicehash pays Bitcoin which is higher transaction fees....
Some times I mine there to just get the bitcoin directly.
Jump to: