Can someone tell me what is the current recommended driver for AMD RX480 8GB cards to be used with PhoenixMiner?
Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 74. (Read 784985 times)
April 17, 2021, 05:19:37 AM
April 17, 2021, 02:37:25 AM
A beta version was supposed to come out this week, meaning the full release of the next version may not come out for another 3-4 weeks. Beta is NOT a full release and may not even be an open beta for EVERYONE to get access to(the nature of beta itself isn't always an open one).
LET'S GO, WAITING FOR TOMORROW FOR THE NEW VERSION OF PHOENIXMINER
Phoenixminer *.*
Someone told me it might be delayed for 3 or 4 weeks,
Not sure if that is totally correct however.
LET'S GO, WAITING FOR TOMORROW FOR THE NEW VERSION OF PHOENIXMINER
Phoenixminer *.*
Someone told me it might be delayed for 3 or 4 weeks,
Not sure if that is totally correct however.
April 16, 2021, 04:13:05 PM
LET'S GO, WAITING FOR TOMORROW FOR THE NEW VERSION OF PHOENIXMINER
Phoenixminer *.*
April 16, 2021, 09:12:14 AM
Anyone know if it's possible for PhoenixMiner to remember the 'Maximum difficulty of found share' value between sessions?
I was quite proud of my 98.0 TH (!!!) but after rebooting for a Windows update it has forgotten the max value.
I was quite proud of my 98.0 TH (!!!) but after rebooting for a Windows update it has forgotten the max value.
April 15, 2021, 08:34:40 PM
You need to remove the '#' sign from the beginning of each line. That comments out the line so that it is not read.
April 15, 2021, 08:09:23 PM
I've looked online first and didn't find an answer, I've put the following in, it mines but nothing is coming up on Ethermine as that anything is mining, I'm honestly at a lost if anyone can help me.
#-pool us1.ethermine.org -itismine.workername us1.ethermine.org:4444
#-wal "my personal wallet code would go here"
#-proto 3
#-cdm 2
When I put in that wallet on Ethermine it keeps showing inactive.
#-pool us1.ethermine.org -itismine.workername us1.ethermine.org:4444
#-wal "my personal wallet code would go here"
#-proto 3
#-cdm 2
When I put in that wallet on Ethermine it keeps showing inactive.
April 15, 2021, 05:11:59 PM
Does anyone have the Powercolor Red Devil 5700XT using Phoenix 5.5c?
What drivers to use, and what config in Afterburner are the best?
From the last two weeks i got a lot errors in AMD drivers, and the miner closes.
Im with 1880 Memory clock, 1350 core clock and 750w.
I've test with 1860, 1375 and 800w and happens the same.
With drivers 20.12.1, but i test 20.9.1 also and the same problem.
What shoud i do better to resolve this problem?
What drivers to use, and what config in Afterburner are the best?
From the last two weeks i got a lot errors in AMD drivers, and the miner closes.
Im with 1880 Memory clock, 1350 core clock and 750w.
I've test with 1860, 1375 and 800w and happens the same.
With drivers 20.12.1, but i test 20.9.1 also and the same problem.
What shoud i do better to resolve this problem?
Also
got a new strange problem and have no idea how to fix it. phoenix 5.5c amd 20.5.1 windows 10 fall creator update. 7x ref vega 56/64 all with morpheus coolers (so no temp problem). the system was mining for a month stable but now every 1-2 days gpu1 sais 4556765645 mh/s and crashes the miner. drivers do not reset, i just need to wait till windows closes the miner so i can restart it. any ideas?
I have a powercolor 5700XT and a Sapphire 5700xt - the Powercolor crashed every 6 or seven hours with an AMD error popup. I ran the registry update file included with teamredminer and haven't had any problems since. I'm running all my AMDs on teamredminer for the next month or so as a thank you.
April 15, 2021, 02:21:16 PM
Hello!
One of my rigs has a problem with 2-3 of 5 geforce gtx1060 cards.
Everytime I start the miner I get the error: "unable to get temperature"
I already made newest version of drivers and phoenixminer.
How can I solve this problem ?
Thanks for help
downgrade your driver. Better look what phoenix recommends. It means 5.5c not supporting that driver. One of my rigs has a problem with 2-3 of 5 geforce gtx1060 cards.
Everytime I start the miner I get the error: "unable to get temperature"
I already made newest version of drivers and phoenixminer.
How can I solve this problem ?
Thanks for help
April 15, 2021, 09:09:28 AM
Hello!
One of my rigs has a problem with 2-3 of 5 geforce gtx1060 cards.
Everytime I start the miner I get the error: "unable to get temperature"
I already made newest version of drivers and phoenixminer.
How can I solve this problem ?
Thanks for help
One of my rigs has a problem with 2-3 of 5 geforce gtx1060 cards.
Everytime I start the miner I get the error: "unable to get temperature"
I already made newest version of drivers and phoenixminer.
How can I solve this problem ?
Thanks for help
April 15, 2021, 08:07:27 AM
Got a good deal on a 1080 Ti Founders Edition. When mining I sometimes can't get the DAG to go past 54% for some reason.
Sometimes restarting the miner works but often I would have to restart the computer just to get the miner to build the DAG and finally get mining.
These are the flags I use:
-nvKernel 3 -nvdo 1 -straps 2 -cclock +320 -mclock -50 -powlim -25 -fanmin 65 -tt 68 -hstats 2 -lidag 1
Is there anything I'm missing here?
EDIT: figured it out, -cclock shouldn't go past 290
I think it will be better if you add some memory clock and less core clock for eth. and use -nvmem 2 -straps 2Sometimes restarting the miner works but often I would have to restart the computer just to get the miner to build the DAG and finally get mining.
These are the flags I use:
-nvKernel 3 -nvdo 1 -straps 2 -cclock +320 -mclock -50 -powlim -25 -fanmin 65 -tt 68 -hstats 2 -lidag 1
Is there anything I'm missing here?
EDIT: figured it out, -cclock shouldn't go past 290
What speed you getting now?
I ended up with:
-nvKernel 3 -nvdo 1 -straps 2 -cclock +275 -mclock +50 -powlim -26 -fanmin 65 -tt 68 -hstats 2
And got me an average of 44.5 MHs at 185 watts. Temps at a constant 67C with the single fan going 65% to 70% depending on ambient temps. I'll try -nvmem 2 on the next pay cycle (or perhaps when the beta of the new PM version is released).
April 15, 2021, 06:16:11 AM
Does anyone have the Powercolor Red Devil 5700XT using Phoenix 5.5c?
What drivers to use, and what config in Afterburner are the best?
From the last two weeks i got a lot errors in AMD drivers, and the miner closes.
Im with 1880 Memory clock, 1350 core clock and 750w.
I've test with 1860, 1375 and 800w and happens the same.
With drivers 20.12.1, but i test 20.9.1 also and the same problem.
What shoud i do better to resolve this problem?
What drivers to use, and what config in Afterburner are the best?
From the last two weeks i got a lot errors in AMD drivers, and the miner closes.
Im with 1880 Memory clock, 1350 core clock and 750w.
I've test with 1860, 1375 and 800w and happens the same.
With drivers 20.12.1, but i test 20.9.1 also and the same problem.
What shoud i do better to resolve this problem?
Lower Memory clock to 1800, from what i know that is the most stable mclock setting with the 5700xt's and then slowly go higher till you see problems.
April 14, 2021, 11:52:04 PM
Does anyone have the Powercolor Red Devil 5700XT using Phoenix 5.5c?
What drivers to use, and what config in Afterburner are the best?
From the last two weeks i got a lot errors in AMD drivers, and the miner closes.
Im with 1880 Memory clock, 1350 core clock and 750w.
I've test with 1860, 1375 and 800w and happens the same.
With drivers 20.12.1, but i test 20.9.1 also and the same problem.
What shoud i do better to resolve this problem?
What drivers to use, and what config in Afterburner are the best?
From the last two weeks i got a lot errors in AMD drivers, and the miner closes.
Im with 1880 Memory clock, 1350 core clock and 750w.
I've test with 1860, 1375 and 800w and happens the same.
With drivers 20.12.1, but i test 20.9.1 also and the same problem.
What shoud i do better to resolve this problem?
>>Im with 1880 Memory clock, 1350 core clock and 750w.
1880 mem clock seems way too much, I cannot belive that this worked in the first place,
I cannot go over 1832. Driver version does not matter.
April 14, 2021, 07:25:12 PM
Does anyone have the Powercolor Red Devil 5700XT using Phoenix 5.5c?
What drivers to use, and what config in Afterburner are the best?
From the last two weeks i got a lot errors in AMD drivers, and the miner closes.
Im with 1880 Memory clock, 1350 core clock and 750w.
I've test with 1860, 1375 and 800w and happens the same.
With drivers 20.12.1, but i test 20.9.1 also and the same problem.
What shoud i do better to resolve this problem?
What drivers to use, and what config in Afterburner are the best?
From the last two weeks i got a lot errors in AMD drivers, and the miner closes.
Im with 1880 Memory clock, 1350 core clock and 750w.
I've test with 1860, 1375 and 800w and happens the same.
With drivers 20.12.1, but i test 20.9.1 also and the same problem.
What shoud i do better to resolve this problem?
April 14, 2021, 11:41:27 AM
got a new strange problem and have no idea how to fix it. phoenix 5.5c amd 20.5.1 windows 10 fall creator update. 7x ref vega 56/64 all with morpheus coolers (so no temp problem). the system was mining for a month stable but now every 1-2 days gpu1 sais 4556765645 mh/s and crashes the miner. drivers do not reset, i just need to wait till windows closes the miner so i can restart it. any ideas?
I've gotten this error on my Radeon VII when I push the OC just a hair too high on the core. My other GPU's continue to report normally, so your GPU 1 may have degraded slightly.
Try scaling back the core freq on that unit 100 mhz and see if everything stabilizes.
April 13, 2021, 04:38:25 AM
Gminer is a tiny bit faster. On 8 x 1080 i went up 5 MH/s or so.
SimpleMining
+---+-----+----+---+-----------+--------+----+-----+-----+-------------+
| 0 1080 58 C 0 % 30.47 MH/s 246/0/0 1657 4519 102 W 298.75 KH/W |
| 1 1080 59 C 0 % 30.54 MH/s 215/0/0 1632 4519 102 W 299.42 KH/W |
| 2 1080 57 C 0 % 30.20 MH/s 200/0/0 1657 4519 102 W 296.08 KH/W |
| 3 1080 53 C 0 % 30.72 MH/s 191/0/0 1670 4519 102 W 301.22 KH/W |
| 4 1080 52 C 0 % 30.17 MH/s 209/0/0 1620 4519 102 W 295.80 KH/W |
| 5 1080 55 C 0 % 30.73 MH/s 214/0/0 1670 4519 102 W 301.30 KH/W |
| 6 1080 55 C 0 % 30.47 MH/s 173/0/0 1670 4519 102 W 298.68 KH/W |
| 7 1080 56 C 0 % 30.54 MH/s 177/0/0 1670 4519 102 W 299.40 KH/W |
| 243.85 MH/s 1625/0/0 816 W 298.83 KH/W |
+---+-----+----+---+-----------+--------+----+-----+-----+-------------+
SimpleMining
+---+-----+----+---+-----------+--------+----+-----+-----+-------------+
| 0 1080 58 C 0 % 30.47 MH/s 246/0/0 1657 4519 102 W 298.75 KH/W |
| 1 1080 59 C 0 % 30.54 MH/s 215/0/0 1632 4519 102 W 299.42 KH/W |
| 2 1080 57 C 0 % 30.20 MH/s 200/0/0 1657 4519 102 W 296.08 KH/W |
| 3 1080 53 C 0 % 30.72 MH/s 191/0/0 1670 4519 102 W 301.22 KH/W |
| 4 1080 52 C 0 % 30.17 MH/s 209/0/0 1620 4519 102 W 295.80 KH/W |
| 5 1080 55 C 0 % 30.73 MH/s 214/0/0 1670 4519 102 W 301.30 KH/W |
| 6 1080 55 C 0 % 30.47 MH/s 173/0/0 1670 4519 102 W 298.68 KH/W |
| 7 1080 56 C 0 % 30.54 MH/s 177/0/0 1670 4519 102 W 299.40 KH/W |
| 243.85 MH/s 1625/0/0 816 W 298.83 KH/W |
+---+-----+----+---+-----------+--------+----+-----+-----+-------------+
April 13, 2021, 02:59:41 AM
got a new strange problem and have no idea how to fix it. phoenix 5.5c amd 20.5.1 windows 10 fall creator update. 7x ref vega 56/64 all with morpheus coolers (so no temp problem). the system was mining for a month stable but now every 1-2 days gpu1 sais 4556765645 mh/s and crashes the miner. drivers do not reset, i just need to wait till windows closes the miner so i can restart it. any ideas?
April 12, 2021, 05:11:37 PM
anyone tried to compare hashrate on GTX 1080 vs gminer?
Phoenix does not win for all miners, there are faster ones. But so far, I only trust him, well, I'm used to Claymore (and they are similar) April 12, 2021, 05:07:58 PM
Hi @Poenix
When new version is ?
Personally, I think the other day! We are waiting!!!When new version is ?
April 12, 2021, 05:07:03 PM
Hi @Poenix
When new version is ?
Personally, I think the other day! We are waiting!!! When new version is ?
April 12, 2021, 05:05:53 PM
anyone tried to compare hashrate on GTX 1080 vs gminer?
Jump to: