Quote
Automatic payouts are processed every 10 minutes
But novacoins did not send me !!!!!!
Confirmed reward = 23.64696808 !!!!
Payout threshold = 10.00 !!!
I waited for an hour!!!!!!!!!
Send me my novacoins very very quickly! NOW!!!!
Topic: [POOL] --- Coinotron --- RavenCoin PPS: 1.5% ----- PPLNS, RBPPS: 0% --------- - page 93. (Read 295324 times)
February 12, 2013, 06:39:54 PM
But novacoins did not send me !!!!!!
Confirmed reward = 23.64696808 !!!!
Payout threshold = 10.00 !!!
I waited for an hour!!!!!!!!!
Send me my novacoins very very quickly! NOW!!!!
February 12, 2013, 05:15:28 PM
scrypty meant sorry getting others mixed up lol.. Am thinking of RUCoin lol opps.
CoinTron any chance of RuCoin been added to pool options ?
Hard to say. I don't even know if source code is available
February 12, 2013, 05:07:47 PM
We have started NovaCoin pool.
Remarks:
- currently only getwork protocol is supported
- payouts are disabled until we are sure that everything works correctly.
Remarks:
- currently only getwork protocol is supported
- payouts are disabled until we are sure that everything works correctly.
Are you providing this on SHA256D or scrypty or both.
Do you need any details to setup or are you all good.
What are the pool diff going to be for each one or one or the other as you can mine both with them as they have sha and scrypt with both been 2 separate difficult
scrypty meant sorry getting others mixed up lol.. Am thinking of RUCoin lol opps.
CoinTron any chance of RuCoin been added to pool options ?
February 12, 2013, 05:06:12 PM
We have started NovaCoin pool.
Remarks:
- currently only getwork protocol is supported
- payouts are disabled until we are sure that everything works correctly.
Remarks:
- currently only getwork protocol is supported
- payouts are disabled until we are sure that everything works correctly.
Are you providing this on SHA256D or scrypty or both.
Do you need any details to setup or are you all good.
What are the pool diff going to be for each one or one or the other as you can mine both with them as they have sha and scrypt with both been 2 separate difficult
February 12, 2013, 04:49:32 PM
We have started NovaCoin pool.
Remarks:
- currently only getwork protocol is supported
- payouts are disabled until we are sure that everything works correctly.
Remarks:
- currently only getwork protocol is supported
- payouts are disabled until we are sure that everything works correctly.
Are you providing this on SHA256D or scrypty or both.
Do you need any details to setup or are you all good.
What are the pool diff going to be for each one or one or the other as you can mine both with them as they have sha and scrypt with both been 2 separate difficult
February 12, 2013, 04:43:30 PM
We have started NovaCoin pool.
Remarks:
- port 9322 or 8322
- you should use cgminer with --scrypt option
- currently only getwork protocol is supported
- payouts are disabled until we are sure that everything works correctly.
Remarks:
- port 9322 or 8322
- you should use cgminer with --scrypt option
- currently only getwork protocol is supported
- payouts are disabled until we are sure that everything works correctly.
February 12, 2013, 03:56:14 PM
I'm getting the 2% stales with cgminer and stratum. How do you use stratum with Reaper v13? I couldn't find any information on it...
Hope it gets fixed soon. 2.10.5 doesn't seem to make any difference to me.
Hope it gets fixed soon. 2.10.5 doesn't seem to make any difference to me.
There is special version of Reaper made by Balthazar : https://bitcointalksearch.org/topic/m.1417172
It should work, but I didn't test it.
February 12, 2013, 02:54:34 PM
I'm getting the 2% stales with cgminer and stratum. How do you use stratum with Reaper v13? I couldn't find any information on it...
Hope it gets fixed soon. 2.10.5 doesn't seem to make any difference to me.
Hope it gets fixed soon. 2.10.5 doesn't seem to make any difference to me.
February 11, 2013, 06:35:24 PM
Dear coinotron,
I'm using stratum proxy with reaper to mine LTC. It is working well, however, the difficulty is
never increasing above 16. Isn't difficulty supposed to change dynamically? If so, how is this
accomplished?
Thanks,
rustyh17
I'm using stratum proxy with reaper to mine LTC. It is working well, however, the difficulty is
never increasing above 16. Isn't difficulty supposed to change dynamically? If so, how is this
accomplished?
Thanks,
rustyh17
Hey rustyh17
Currently difficulty is not variable. It is 16 for all miners.
Best regards
PS
Variable diff will be introduced in future.
February 11, 2013, 12:17:52 PM
Dear coinotron,
I'm using stratum proxy with reaper to mine LTC. It is working well, however, the difficulty is
never increasing above 16. Isn't difficulty supposed to change dynamically? If so, how is this
accomplished?
Thanks,
rustyh17
I'm using stratum proxy with reaper to mine LTC. It is working well, however, the difficulty is
never increasing above 16. Isn't difficulty supposed to change dynamically? If so, how is this
accomplished?
Thanks,
rustyh17
February 08, 2013, 06:33:47 AM
FYI
Week after introduction of Stratum LTC pool:
35% of LTC miners use stratum
Average efficiency = 99.5 % ( getwork 97.5%)
Some miners have got high rate of rejected shares (2%-3%). It is probably related to bug in cgminer
I've reported it to cgminer developer ckovalis:
https://bitcointalksearch.org/topic/m.1500519
New version 2.10.5 improves things a little bit, but doesn't eradicate it.
However there are miners who have almost 0% rejected shares and are using cgminer.
Maybe problem is caused by too high cgminer's settings ?
Week after introduction of Stratum LTC pool:
35% of LTC miners use stratum
Average efficiency = 99.5 % ( getwork 97.5%)
Some miners have got high rate of rejected shares (2%-3%). It is probably related to bug in cgminer
I've reported it to cgminer developer ckovalis:
https://bitcointalksearch.org/topic/m.1500519
New version 2.10.5 improves things a little bit, but doesn't eradicate it.
However there are miners who have almost 0% rejected shares and are using cgminer.
Maybe problem is caused by too high cgminer's settings ?
February 06, 2013, 12:22:20 PM
I am having a problem with the BTC shares. No matter how I configure my miners, your site is not giving me my shares. I currently have only one GPU mining on cgminer for testing, here is the config;
cgminer -o stratum+tcp://coinotron.com:3333 -u modcom.mc1b -p xxxx --shaders 1408 -I 12 -g 1 -w 64
I show approx 300Mh'/s, you site shows about the same. But no shares that are being accepted are increasing my share counter. I have been trying to get this up and running for the last day to no avail. I tried guiminer as well, still no luck on share counts. I feel as though I’m giving away my shares, because your pool site is not recording them.
At one point I pointed all my miners at your site, for BTC, showing 1.9 Gh/s and still no BTC shares were being recorded in my account.
Any and all help would be appreciated.
cgminer -o stratum+tcp://coinotron.com:3333 -u modcom.mc1b -p xxxx --shaders 1408 -I 12 -g 1 -w 64
I show approx 300Mh'/s, you site shows about the same. But no shares that are being accepted are increasing my share counter. I have been trying to get this up and running for the last day to no avail. I tried guiminer as well, still no luck on share counts. I feel as though I’m giving away my shares, because your pool site is not recording them.
At one point I pointed all my miners at your site, for BTC, showing 1.9 Gh/s and still no BTC shares were being recorded in my account.
Any and all help would be appreciated.
BTC rewards are calculated every 3 hours. Other coins every 2 minutes. That is probably the reason of you not seeing changes in your balance.
Few months ago rewards in BTC pool were calculated using DGM method. It was affecting pool's performance, so I introduced this 3 hours refreshing period.
Anyway, I changed refreshing period to 10 min.
February 06, 2013, 12:05:48 PM
FYI
Efficiency of Stratum pools :
BTC pool efficiency = 0.22%
LTC pool efficienfy = 0.6%
TRC pool efficiency = 0.64%
Efficiency of Stratum pools :
BTC pool efficiency = 0.22%
LTC pool efficienfy = 0.6%
TRC pool efficiency = 0.64%
do you mean:
BTC pool efficiency = 99.78%
LTC pool efficienfy = 99.4%
TRC pool efficiency = 99.36%
??
p.s.
my average ping to coinotron is 39ms and im getting about 2% reject at LTC - 1080rej @ 49000acc :
but stales are rare, most rejects are "incorrect extraonce size" or "ntime out of range" :
what can be the problem ?
Yes, my mistake. I was thinking about stales
Anyway, corrected.Regarding 2% reject rate, please find out my question on cgminer's thread and following messages.
Problem seems to be related to cgminer. Author is hopefully investigating this issue.
https://bitcointalksearch.org/topic/m.1500519
February 06, 2013, 12:00:05 PM
I am having a problem with the BTC shares. No matter how I configure my miners, your site is not giving me my shares. I currently have only one GPU mining on cgminer for testing, here is the config;
cgminer -o stratum+tcp://coinotron.com:3333 -u modcom.mc1b -p xxxx --shaders 1408 -I 12 -g 1 -w 64
I show approx 300Mh'/s, you site shows about the same. But no shares that are being accepted are increasing my share counter. I have been trying to get this up and running for the last day to no avail. I tried guiminer as well, still no luck on share counts. I feel as though I’m giving away my shares, because your pool site is not recording them.
At one point I pointed all my miners at your site, for BTC, showing 1.9 Gh/s and still no BTC shares were being recorded in my account.
Any and all help would be appreciated.
cgminer -o stratum+tcp://coinotron.com:3333 -u modcom.mc1b -p xxxx --shaders 1408 -I 12 -g 1 -w 64
I show approx 300Mh'/s, you site shows about the same. But no shares that are being accepted are increasing my share counter. I have been trying to get this up and running for the last day to no avail. I tried guiminer as well, still no luck on share counts. I feel as though I’m giving away my shares, because your pool site is not recording them.
At one point I pointed all my miners at your site, for BTC, showing 1.9 Gh/s and still no BTC shares were being recorded in my account.
Any and all help would be appreciated.
I may be able to give you somewhat of an answer until coinotron gives a more definitive one. I have noticed when I am mining alt coins at coinotron the counters update every few minutes. But I have noticed when mining BTC that the counters take a long time to update. You're still getting credit, it just isn't showing.
February 06, 2013, 08:55:35 AM
I am having a problem with the BTC shares. No matter how I configure my miners, your site is not giving me my shares. I currently have only one GPU mining on cgminer for testing, here is the config;
cgminer -o stratum+tcp://coinotron.com:3333 -u modcom.mc1b -p xxxx --shaders 1408 -I 12 -g 1 -w 64
I show approx 300Mh'/s, you site shows about the same. But no shares that are being accepted are increasing my share counter. I have been trying to get this up and running for the last day to no avail. I tried guiminer as well, still no luck on share counts. I feel as though I’m giving away my shares, because your pool site is not recording them.
At one point I pointed all my miners at your site, for BTC, showing 1.9 Gh/s and still no BTC shares were being recorded in my account.
Any and all help would be appreciated.
cgminer -o stratum+tcp://coinotron.com:3333 -u modcom.mc1b -p xxxx --shaders 1408 -I 12 -g 1 -w 64
I show approx 300Mh'/s, you site shows about the same. But no shares that are being accepted are increasing my share counter. I have been trying to get this up and running for the last day to no avail. I tried guiminer as well, still no luck on share counts. I feel as though I’m giving away my shares, because your pool site is not recording them.
At one point I pointed all my miners at your site, for BTC, showing 1.9 Gh/s and still no BTC shares were being recorded in my account.
Any and all help would be appreciated.
February 06, 2013, 08:49:34 AM
FYI
Efficiency of Stratum pools :
BTC pool efficiency = 0.22%
LTC pool efficienfy = 0.6%
TRC pool efficiency = 0.64%
Efficiency of Stratum pools :
BTC pool efficiency = 0.22%
LTC pool efficienfy = 0.6%
TRC pool efficiency = 0.64%
do you mean:
BTC pool efficiency = 99.78%
LTC pool efficienfy = 99.4%
TRC pool efficiency = 99.36%
??
p.s.
my average ping to coinotron is 39ms and im getting about 2% reject at LTC - 1080rej @ 49000acc :
but stales are rare, most rejects are "incorrect extraonce size" or "ntime out of range" :
what can be the problem ?
February 05, 2013, 06:23:00 AM
FYI
Efficiency of Stratum pools :
BTC pool efficiency = 99.78%
LTC pool efficienfy = 99.4%
TRC pool efficiency = 99.36%
Efficiency of Stratum pools :
BTC pool efficiency = 99.78%
LTC pool efficienfy = 99.4%
TRC pool efficiency = 99.36%
February 02, 2013, 10:22:49 AM
Will you be adding Stratum to the remaining pools, too?
Lets take a look at figures:
PPC pool has 30 stales / 6000 shares ie 0.5%, FRC 0 stales / 10000 shares = 0.0%
I don't think stratum will improve much effectiveness of those pools.
Of course we will introduce stratum when we observe significant performance degradation.
February 02, 2013, 06:01:54 AM
Will you be adding Stratum to the remaining pools, too?
February 02, 2013, 05:53:14 AM
We have added Stratum support to BTC pool. So now we have stratum in BTC, LTC, TRC !
1. Please use latest versions of following miners: cgminer, bfgminer, guiminer, poclbm
2. Stratum mining is available in the following pools:
BTC = coinotron.com:3333
LTC = coinotron.com:3334
TRC = coinotron.com:3335
3. Share difficulty may differ from main getwork pool.
1. Please use latest versions of following miners: cgminer, bfgminer, guiminer, poclbm
2. Stratum mining is available in the following pools:
BTC = coinotron.com:3333
LTC = coinotron.com:3334
TRC = coinotron.com:3335
3. Share difficulty may differ from main getwork pool.
Jump to: