Hello.
Could me write the "extra code" for SHA-256 mining, please?.
I don't found it in the website.
Thank you in advance.
Antuam
Topic: [POOL] YAAMP.COM multipool multialgo profit switch with exchange - page 55. (Read 181280 times)
April 30, 2015, 07:48:14 PM
Seems to be working again 
April 30, 2015, 05:47:23 PM
But what about random drops in btc?
April 30, 2015, 05:42:49 PM
question, is there any another multi algo for quark and qubit pool?, I only know this, I have set up as backup another pool but it is only X11, and X11 is not very efficient lately 
I prefer yaamp of course, but, just to have a backup for situations like this.
I prefer yaamp of course, but, just to have a backup for situations like this.
April 30, 2015, 04:41:11 PM
first strange change of balance, then miners are disconnected...
Yes, I noticed this too.
First, I noticed reduction of balance at the 15:30 payout - but never received payout.
Then an hour later, I noticed the miners disconnected and balance page continually flipping around.
Now everything is down.
Hopefully it gets rectified, was a good day for scrypt with SPHR coin mining.
Been mining YAAMP on and off for 3 days Scrypt, and this is the second problem already. Bummed.
Might have to remove it from my list of pools to mine from if its this problematic.
April 30, 2015, 03:57:10 PM
first strange change of balance, then miners are disconnected...
April 30, 2015, 03:53:49 PM
down here since 16:09
April 30, 2015, 03:52:00 PM
service down?
my miners are sending shares but in the page says no miners activity so I don't know if it is working or not 
[EDIT] MINERS NOT WORKING, connection rejected.
anybody else?
April 30, 2015, 03:39:08 PM
service down?
April 30, 2015, 10:36:36 AM
Hello,
I am new to this pool. Could anybody help me configuring a KNC Titan to work with this pool using Scrypt Mining?
Which firmware should be used?
Thank you!
I am new to this pool. Could anybody help me configuring a KNC Titan to work with this pool using Scrypt Mining?
Which firmware should be used?
Thank you!
https://bitcointalksearch.org/topic/m.11183406
search not hurt
April 30, 2015, 04:03:11 AM
Hello,
I am new to this pool. Could anybody help me configuring a KNC Titan to work with this pool using Scrypt Mining?
Which firmware should be used?
Thank you!
I am new to this pool. Could anybody help me configuring a KNC Titan to work with this pool using Scrypt Mining?
Which firmware should be used?
Thank you!
April 30, 2015, 02:51:46 AM
We get lower rates on the quark pool because of this:
Looks like you mine 2 coins with different extranounce size, and send a msg to the mining software 2 times a second.
Looks like you mine 2 coins with different extranounce size, and send a msg to the mining software 2 times a second.
April 29, 2015, 03:03:42 PM
hi,
ETSu3CXvbwyB3eNnvUU8UQQ9ngUXoKq8zb this wallet is EnigmaCoin but ur site shows Viacoion ? pls chance it.
ETSu3CXvbwyB3eNnvUU8UQQ9ngUXoKq8zb this wallet is EnigmaCoin but ur site shows Viacoion ? pls chance it.
April 29, 2015, 10:05:56 AM
weird...about .2 btc lost from my page during the night???
-at around the 4 hr mark??
-at around the 4 hr mark?
? April 29, 2015, 09:12:37 AM
@ yaamp
Do I need to set a difficulty for my Gaw Fury miners? I get a lot of:
gridseed detect (1:4) failed to initualise (incorrect device)
Zeus detect (1:3) failed to initialise (incorrect device)
I have changed nothing from any previous bat settings to this one. I am mining on the scrypt pool only.
Edit: My hash on the network is also no where near what it should be.
Do I need to set a difficulty for my Gaw Fury miners? I get a lot of:
gridseed detect (1:4) failed to initualise (incorrect device)
Zeus detect (1:3) failed to initialise (incorrect device)
I have changed nothing from any previous bat settings to this one. I am mining on the scrypt pool only.
Edit: My hash on the network is also no where near what it should be.
i'd so much like to help you. i know some other people had issues with their asics too. but honestly, i have no clue. if one of you guys has some time to help, we can install a debugging setup and get some more info. i'll try to hang in freenode irc channel #yaamp (part time) so we can coordinate if that happens.
I just unplugged and replugged all my Gaw Furries and it works now. Minus my rejects
April 29, 2015, 08:33:51 AM
Yaamp, do you have any plans for the fhirlpoolx algorithm, and what is the situation with the groestl?
Thank you!
Thank you!
hello,
i dont think we'll add whirlpoolx or zr5 soon as they changed the regular rpc api quite a lot. but groestl is just a matter of testing it. none of my installed miners software support groestl. we'll be looking at it.
Just remember that, while groestlcoin and diamond use the same hashing algorythm, they use a different transaction hash. It doesn't matter if you use getwork but it matters if you use stratum.
See this message and related posts on the same thread:
https://bitcointalk.org/index.php?topic=580725.msg6731722;topicseen#msg6731722
April 29, 2015, 07:43:51 AM
@ yaamp
Do I need to set a difficulty for my Gaw Fury miners? I get a lot of:
gridseed detect (1:4) failed to initualise (incorrect device)
Zeus detect (1:3) failed to initialise (incorrect device)
I have changed nothing from any previous bat settings to this one. I am mining on the scrypt pool only.
Edit: My hash on the network is also no where near what it should be.
Do I need to set a difficulty for my Gaw Fury miners? I get a lot of:
gridseed detect (1:4) failed to initualise (incorrect device)
Zeus detect (1:3) failed to initialise (incorrect device)
I have changed nothing from any previous bat settings to this one. I am mining on the scrypt pool only.
Edit: My hash on the network is also no where near what it should be.
i'd so much like to help you. i know some other people had issues with their asics too. but honestly, i have no clue. if one of you guys has some time to help, we can install a debugging setup and get some more info. i'll try to hang in freenode irc channel #yaamp (part time) so we can coordinate if that happens.
April 29, 2015, 07:27:43 AM
Yaamp, do you have any plans for the fhirlpoolx algorithm, and what is the situation with the groestl?
Thank you!
Thank you!
hello,
i dont think we'll add whirlpoolx or zr5 soon as they changed the regular rpc api quite a lot. but groestl is just a matter of testing it. none of my installed miners software support groestl. we'll be looking at it.
April 29, 2015, 07:19:16 AM
we received an email from our server provider a few days ago saying that yamp.com has been the target of a ddos attack and network communications were shutdown automatically for a few hours. that explains the blackout we had a few days ago.
we should now be looking at ddos protection solutions.
we should now be looking at ddos protection solutions.
April 29, 2015, 07:11:27 AM
Hello Yaamp :-)
Would it be possible to provide miner statistics in the API? Especially the hashrate of each miner?
That would allow to compare accepted hashrate to what's reported by the miner and adjust our estimations.
Maybe just a big hash with all the stats under http://yaamp.com/api/miners?address=BITCOIN_WALLET
Would it be possible to provide miner statistics in the API? Especially the hashrate of each miner?
That would allow to compare accepted hashrate to what's reported by the miner and adjust our estimations.
Maybe just a big hash with all the stats under http://yaamp.com/api/miners?address=BITCOIN_WALLET
Hello,
we added the walletex api function.
Jump to: