[POOL] YAAMP.COM multipool multialgo profit switch with exchange - page 57.

unitedminers

full member

Activity: 241

Merit: 100

Quote from: dexu on April 24, 2015, 09:32:29 AM

Got this firmware - https://github.com/KnCMiner/titan/releases/download/v1.97/titan-upgrade-1.97.bin works best for me.

And stratum+tcp://pool-adress:port/#xnsub#skipcbcheck#notls as pool adress and [F]ailover only enabled
.. that's it Wink

First of all thank you for sharing your settings!

After 5 minutes I'm hashing with about 3-5 percent rejects and decreasing. I'm still at version 1.94 beta, added /#xnsub#skipcbcheck#notls and switched from "Load balance" to "Failover".

After 16 minutes only 1.6 percent reject rate

BTW why have you chosen Litecoins for the payout?

dexu

full member

Activity: 155

Merit: 100

Quote from: unitedminers on April 24, 2015, 09:28:03 AM

Quote from: dexu on April 24, 2015, 03:42:58 AM

My titan doing well on this pool - http://yaamp.com/?address=LYjbFTuz5VfWazBR1mVfuxrDSBCgWGYXyL

What's your Titan firmware? Any extra settings?

Got this firmware - https://github.com/KnCMiner/titan/releases/download/v1.97/titan-upgrade-1.97.bin works best for me.

And stratum+tcp://pool-adress:port/#xnsub#skipcbcheck#notls as pool adress and [F]ailover only enabled
.. that's it Wink

Regards.

unitedminers

full member

Activity: 241

Merit: 100

Quote from: dexu on April 24, 2015, 03:42:58 AM

My titan doing well on this pool - http://yaamp.com/?address=LYjbFTuz5VfWazBR1mVfuxrDSBCgWGYXyL

What's your Titan firmware? Any extra settings?

dexu

full member

Activity: 155

Merit: 100

My titan doing well on this pool - http://yaamp.com/?address=LYjbFTuz5VfWazBR1mVfuxrDSBCgWGYXyL

Hey Yaamp, please add MONA coin to this awesome pool

Best Regards.

unitedminers

full member

Activity: 241

Merit: 100

Quote from: phila on April 23, 2015, 07:41:34 PM

Would really like to mine scrypt at yaamp as well, all my GPU's are hashing here and my Titan is missing out on all the action.

I have exactly the same problem with Titan 1.94 beta. High reject rate (till 20%), many disconnects (Europe), stops hashing. No Problems with other pools.

phila

newbie

Activity: 30

Merit: 0

Quote

Quote from: MarvinO on April 22, 2015, 05:18:26 AM

Could you please try to find out why Titan firmware v2.00 (meaning bfgminer 5.1.0-titan-2.00) has horrible reject ratio with both scrypt and scryptn having a lot of "invalid time rolling" jobs. This is the only pool where I have seen this error (no problems on p2pool, litecoinpool, nicehash, etc). And the reject ratio is crazy, over 20% and speed of under 300MH/s for scrypt.

When I used the bfgminer from Titan firmware v1.97 (meaning bfgminer 5.0.0-titan-1.96, notice KnC did not change the version number there from 1.96) the "invalid time rolling" does not happen and I get the usual ~340MH/s.

Got the same problem here, only on yaamp pool.

Also same... including:

Quote

[2015-04-24 00:01:12] Pool 1 is sending mismatched block contents to us (0 is n
ot 1-1)

With me it's 30% rejects and Titan bombs out after a minute or so, after which I cant connect to it until I switch pool or reboot. Usually reboot instead since after all the "invalid time rolling" and BFG disconnecting it struggles to perform or even to start hashing again at any other pool right after.

Would really like to mine scrypt at yaamp as well, all my GPU's are hashing here and my Titan is missing out on all the action.

_javi_

hero member

Activity: 968

Merit: 624

Still a manic miner

is it normal..?? i get lots of "quark extranonce change requested". (sgminer 5.1, win7 64)

dexu

full member

Activity: 155

Merit: 100

Downgraded and its ok ..

dexu

full member

Activity: 155

Merit: 100

Quote from: ?? on ??

Could you please try to find out why Titan firmware v2.00 (meaning bfgminer 5.1.0-titan-2.00) has horrible reject ratio with both scrypt and scryptn having a lot of "invalid time rolling" jobs. This is the only pool where I have seen this error (no problems on p2pool, litecoinpool, nicehash, etc). And the reject ratio is crazy, over 20% and speed of under 300MH/s for scrypt.

When I used the bfgminer from Titan firmware v1.97 (meaning bfgminer 5.0.0-titan-1.96, notice KnC did not change the version number there from 1.96) the "invalid time rolling" does not happen and I get the usual ~340MH/s.

Got the same problem here, only on yaamp pool.

xrnath

member

Activity: 80

Merit: 10

Code:

503 Service Unavailable

No server is available to handle this request.

Receiving the aforementioned error when trying to access http://www.yaamp.com.

DougB62

hero member

Activity: 672

Merit: 500

Banned: For Your Protection

Quote from: xalen on April 21, 2015, 08:55:04 PM

Hello. Did anyone knows why on graph Pending goes down while Balance didn't rise up

The "Pending" most likely fell due to an orphaned block. Your 'Balance" (the blue line) will rise as the blocks mature, and are exchanged. (This takes a while, and is always behind the "pending")

xalen

newbie

Activity: 20

Merit: 0

Hello. Did anyone knows why on graph Pending goes down while Balance didn't rise up

http://i60.tinypic.com/2zptkdl.jpg

DougB62

hero member

Activity: 672

Merit: 500

Banned: For Your Protection

Wow! You're quick!! Grin

Thanks for adding that!!!

DougB62

hero member

Activity: 672

Merit: 500

Banned: For Your Protection

Hey yaamp ops - new qubit launch any moment - https://bitcointalksearch.org/topic/ann-droidz-drzqubitwallet-wbittrex-c-cex-alertyobit-c-cex-bittrex-1024845

thevictimofuktyranny

legendary

Activity: 1092

Merit: 1004

Quote from: SRBOOTH on April 21, 2015, 12:27:08 AM

Anyone get ahold of ccminer for neoscrypt yet?? Roll Eyes

Or does anyone have best miner ( with extranonce.subscribe ) and settings for Nvidia 750ti, thanks.

Yeah, djm34 is doing a crowd-funding campaign for it, you can buy it for 0.02BTC.

This link:

https://bitcointalksearch.org/topic/neoscrypt-algo-for-ccminer-and-nvidia-card-call-for-donation-916336

SRBOOTH

sr. member

Activity: 309

Merit: 250

Anyone get ahold of ccminer for neoscrypt yet?? Roll Eyes

Or does anyone have best miner ( with extranonce.subscribe ) and settings for Nvidia 750ti, thanks.

smokiepot

member

Activity: 74

Merit: 10

maybe its because yaamp dont mine with the x14 algo. so yaamp dont accept your passwort and let you only mine the first alive algo ?

SRBOOTH

sr. member

Activity: 309

Merit: 250

Quote from: SRBOOTH on April 19, 2015, 01:02:58 PM

Trying to use ccminer with algo-switch per pool instructions:

:start

ccminer.exe -r 0 -a x11 -o stratum+tcp://yaamp.com:3533 -u joe -p x11,x13,x14,x15,quark,lyra2
ccminer.exe -r 0 -a x13 -o stratum+tcp://yaamp.com:3633 -u joe -p x11,x13,x14,x15,quark,lyra2
ccminer.exe -r 0 -a x14 -o stratum+tcp://yaamp.com:3933 -u joe -p x11,x13,x14,x15,quark,lyra2
ccminer.exe -r 0 -a x15 -o stratum+tcp://yaamp.com:3733 -u joe -p x11,x13,x14,x15,quark,lyra2
ccminer.exe -r 0 -a lyra2 -o stratum+tcp://yaamp.com:4433 -u joe -p x11,x13,x14,x15,quark,lyra2
ccminer.exe -r 0 -a quark -o stratum+tcp://yaamp.com:4033 -u joe -p x11,x13,x14,x15,quark,lyra2

sleep 5000
goto start

However my miner does not switch algo along with pool, could someone please offer advice , thanks.

Sorry to have taken up space on the forum...it is all good , I somehow missed the switch happening in the past, I get the dunce cap of the day Roll Eyes

SRBOOTH

sr. member

Activity: 309

Merit: 250

Quote from: smokiepot on April 19, 2015, 01:05:04 PM

who is joe ? Wink

try your wallet adress. how should yaamp know who joe is ?

You soooo funny , lol, but....really?

smokiepot

member

Activity: 74

Merit: 10

who is joe ? Wink

try your wallet adress. how should yaamp know who joe is ?

Topic: [POOL] YAAMP.COM multipool multialgo profit switch with exchange - page 57. (Read 181320 times)