◀ PrimeChain | Verify Prime Numbers | LESS THAN 500 COINS CREATED PER DAY ▶ - page 12.

MoreBloodWine

legendary

Activity: 1050

Merit: 1001

Quote from: cjmoles on September 16, 2015, 05:41:22 PM

Quote from: MoreBloodWine on September 16, 2015, 03:04:25 PM

Quote from: cjmoles on September 16, 2015, 05:11:52 AM

Quote from: MoreBloodWine on September 16, 2015, 12:41:08 AM

@IGS

Noticed you removed your out of town post that you'd be keeping an eye on the thread.

Anyway, the previous install it ran fine for a while. Re DL'd the client from the main post here.

On a brand new install with nothing done but MBAM, MS Security Ess., and BTC, DOGE, LTC & GRID clients.

It's doing it again but with this "new" little window.

Try this: Open and Run your command prompt as administrator (Your PC's cmd.exe NOT the wallet console)

At the prompt type: BCDedit.exe /set increaseUserVA 2800

Hit: enter

Prompt should read: "The operation completed successfully."

Restart your machine.

The error should be fixed.

That'll do what exactly ?

Before the fresh os, it did the "stop" thing. The cc++ thing started after the clean os install.

Did you try it? It just releases more memory for your cache....Your Boot Configuration Data...too much to get into...just try it...you can always reset back to default.

Tried with no change, same c++ and "stopped" thing.

So how do I default bcd ?

cjmoles

legendary

Activity: 1176

Merit: 1017

Quote from: MoreBloodWine on September 16, 2015, 03:04:25 PM

Quote from: cjmoles on September 16, 2015, 05:11:52 AM

Quote from: MoreBloodWine on September 16, 2015, 12:41:08 AM

@IGS

Noticed you removed your out of town post that you'd be keeping an eye on the thread.

Anyway, the previous install it ran fine for a while. Re DL'd the client from the main post here.

On a brand new install with nothing done but MBAM, MS Security Ess., and BTC, DOGE, LTC & GRID clients.

It's doing it again but with this "new" little window.

Try this: Open and Run your command prompt as administrator (Your PC's cmd.exe NOT the wallet console)

At the prompt type: BCDedit.exe /set increaseUserVA 2800

Hit: enter

Prompt should read: "The operation completed successfully."

Restart your machine.

The error should be fixed.

That'll do what exactly ?

Before the fresh os, it did the "stop" thing. The cc++ thing started after the clean os install.

Did you try it? It just releases more memory for your cache....Your Boot Configuration Data...too much to get into...just try it...you can always reset back to default.

MoreBloodWine

legendary

Activity: 1050

Merit: 1001

Quote from: cjmoles on September 16, 2015, 05:11:52 AM

Quote from: MoreBloodWine on September 16, 2015, 12:41:08 AM

@IGS

Noticed you removed your out of town post that you'd be keeping an eye on the thread.

Anyway, the previous install it ran fine for a while. Re DL'd the client from the main post here.

On a brand new install with nothing done but MBAM, MS Security Ess., and BTC, DOGE, LTC & GRID clients.

It's doing it again but with this "new" little window.

Try this: Open and Run your command prompt as administrator (Your PC's cmd.exe NOT the wallet console)

At the prompt type: BCDedit.exe /set increaseUserVA 2800

Hit: enter

Prompt should read: "The operation completed successfully."

Restart your machine.

The error should be fixed.

That'll do what exactly ?

Before the fresh os, it did the "stop" thing. The cc++ thing started after the clean os install.

AngelLox

sr. member

Activity: 466

Merit: 250

Quote from: dennislevy on September 16, 2015, 11:47:52 AM

Okay, tried adding conf file with no luck. Still zero connections. Not sure what extension I should use.
Tried .txt and .conf neither names in roaming app, seems to work. Had no conf file before, just stopped downloading
new blocks, with zero connections. Nothing in RPC commands allows one to add nodes that way either. Not pinging
to try and find connections either.

Make sure your conf name is right with capitol letters and everything? To be sure i always use the exact name of the wallet folder for the .confs

pjcltd

legendary

Activity: 1778

Merit: 1003

NodeMasters

Quote from: dennislevy on September 16, 2015, 11:47:52 AM

Quote from: nikkers on September 16, 2015, 11:09:49 AM

Quote from: dennislevy on September 16, 2015, 11:03:17 AM

My wallet has not found a new block for 10 hours. Also has zero active connections.
Wallet worked fine for past 10 days, then have zero connections now. Checked
Bittrex, their wallet seems to be working, last block was 8 minutes ago.
On windows 7/64 bit no blocks downloaded for past 10 hours.

Peace, Dennis

28 active connections here, gimme a few i'll make a list of addnodes if you want, although i'm not using any conf myself :S (on win10 pro 64bit)

Code:

Addnode=66.222.226.245
Addnode=79.70.75.238
Addnode=151.80.206.101
Addnode=85.25.199.215
Addnode=54.149.225.204
Addnode=68.196.27.118
Addnode=107.130.201.180
Addnode=50.54.81.39
Addnode=149.202.2.191
Addnode=205.251.171.136
Addnode=104.238.176.251
Addnode=82.47.20.169
Addnode=76.90.105.71
Addnode=81.227.243.16
Addnode=173.71.86.43
Addnode=45.32.237.28
Addnode=23.115.188.142
Addnode=104.200.154.17
Addnode=71.120.122.57
Addnode=68.203.198.73
Addnode=110.174.193.68
Addnode=69.165.47.72
Addnode=79.108.2.227
Addnode=73.203.5.98
Addnode=82.211.30.147
Addnode=76.26.93.255
Addnode=104.40.62.98
Addnode=136.169.60.25

Okay, tried adding conf file with no luck. Still zero connections. Not sure what extension I should use.
Tried .txt and .conf neither names in roaming app, seems to work. Had no conf file before, just stopped downloading
new blocks, with zero connections. Nothing in RPC commands allows one to add nodes that way either. Not pinging
to try and find connections either.

Hi I'll help out if I can get connected to your PC with teamviewer?
I'm sure it's something daft

Thanks
Paul

dennislevy

sr. member

Activity: 300

Merit: 250

Quote from: nikkers on September 16, 2015, 11:09:49 AM

Quote from: dennislevy on September 16, 2015, 11:03:17 AM

My wallet has not found a new block for 10 hours. Also has zero active connections.
Wallet worked fine for past 10 days, then have zero connections now. Checked
Bittrex, their wallet seems to be working, last block was 8 minutes ago.
On windows 7/64 bit no blocks downloaded for past 10 hours.

Peace, Dennis

28 active connections here, gimme a few i'll make a list of addnodes if you want, although i'm not using any conf myself :S (on win10 pro 64bit)

Code:

Addnode=66.222.226.245
Addnode=79.70.75.238
Addnode=151.80.206.101
Addnode=85.25.199.215
Addnode=54.149.225.204
Addnode=68.196.27.118
Addnode=107.130.201.180
Addnode=50.54.81.39
Addnode=149.202.2.191
Addnode=205.251.171.136
Addnode=104.238.176.251
Addnode=82.47.20.169
Addnode=76.90.105.71
Addnode=81.227.243.16
Addnode=173.71.86.43
Addnode=45.32.237.28
Addnode=23.115.188.142
Addnode=104.200.154.17
Addnode=71.120.122.57
Addnode=68.203.198.73
Addnode=110.174.193.68
Addnode=69.165.47.72
Addnode=79.108.2.227
Addnode=73.203.5.98
Addnode=82.211.30.147
Addnode=76.26.93.255
Addnode=104.40.62.98
Addnode=136.169.60.25

Okay, tried adding conf file with no luck. Still zero connections. Not sure what extension I should use.
Tried .txt and .conf neither names in roaming app, seems to work. Had no conf file before, just stopped downloading
new blocks, with zero connections. Nothing in RPC commands allows one to add nodes that way either. Not pinging
to try and find connections either.

nikkers

hero member

Activity: 566

Merit: 500

Quote from: SecretsOfCrypto on September 16, 2015, 11:32:17 AM

Where is the source code???

evreything prime related can be found here :http://primechain.website/index.html

source code:https://github.com/iGotSpots/PrimeChain

SecretsOfCrypto

sr. member

Activity: 466

Merit: 250

Twitter Follow for no BS crypto: @SecretsOfCrypto

Where is the source code???

nikkers

hero member

Activity: 566

Merit: 500

Quote from: dennislevy on September 16, 2015, 11:03:17 AM

My wallet has not found a new block for 10 hours. Also has zero active connections.
Wallet worked fine for past 10 days, then have zero connections now. Checked
Bittrex, their wallet seems to be working, last block was 8 minutes ago.
On windows 7/64 bit no blocks downloaded for past 10 hours.

Peace, Dennis

28 active connections here, gimme a few i'll make a list of addnodes if you want, although i'm not using any conf myself :S (on win10 pro 64bit)

Code:

Addnode=66.222.226.245
Addnode=79.70.75.238
Addnode=151.80.206.101
Addnode=85.25.199.215
Addnode=54.149.225.204
Addnode=68.196.27.118
Addnode=107.130.201.180
Addnode=50.54.81.39
Addnode=149.202.2.191
Addnode=205.251.171.136
Addnode=104.238.176.251
Addnode=82.47.20.169
Addnode=76.90.105.71
Addnode=81.227.243.16
Addnode=173.71.86.43
Addnode=45.32.237.28
Addnode=23.115.188.142
Addnode=104.200.154.17
Addnode=71.120.122.57
Addnode=68.203.198.73
Addnode=110.174.193.68
Addnode=69.165.47.72
Addnode=79.108.2.227
Addnode=73.203.5.98
Addnode=82.211.30.147
Addnode=76.26.93.255
Addnode=104.40.62.98
Addnode=136.169.60.25

dennislevy

sr. member

Activity: 300

Merit: 250

My wallet has not found a new block for 10 hours. Also has zero active connections.
Wallet worked fine for past 10 days, then have zero connections now. Checked
Bittrex, their wallet seems to be working, last block was 8 minutes ago.
On windows 7/64 bit no blocks downloaded for past 10 hours.

Peace, Dennis

cjmoles

legendary

Activity: 1176

Merit: 1017

Quote from: MoreBloodWine on September 16, 2015, 12:41:08 AM

@IGS

Noticed you removed your out of town post that you'd be keeping an eye on the thread.

Anyway, the previous install it ran fine for a while. Re DL'd the client from the main post here.

On a brand new install with nothing done but MBAM, MS Security Ess., and BTC, DOGE, LTC & GRID clients.

It's doing it again but with this "new" little window.

Try this: Open and Run your command prompt as administrator (Your PC's cmd.exe NOT the wallet console)

At the prompt type: BCDedit.exe /set increaseUserVA 2800

Hit: enter

Prompt should read: "The operation completed successfully."

Restart your machine.

The error should be fixed.

fonzerrellie

legendary

Activity: 1190

Merit: 1000

Kaspa

thats weird I'm on win 7 64.

and to those who don't think they are staking have you checked the "stake predictor" ? it seems to take a while to build weight. I reset all my coins a few days ago and it took quite a few days before I started finding more than 1 or 2 blocks a day

MoreBloodWine

legendary

Activity: 1050

Merit: 1001

@IGS

Noticed you removed your out of town post that you'd be keeping an eye on the thread.

Anyway, the previous install it ran fine for a while. Re DL'd the client from the main post here.

On a brand new install with nothing done but MBAM, MS Security Ess., and BTC, DOGE, LTC & GRID clients.

It's doing it again but with this "new" little window.

MoreBloodWine

legendary

Activity: 1050

Merit: 1001

Welp, did a full wipe, re installed 7 64bit... if this doesnt work on a clean install then it is far from user error ;-/

iGotSpots

legendary

Activity: 2548

Merit: 1054

CPU Web Mining 🕸️ on webmining.io

Quote from: forzendiablo on September 15, 2015, 03:01:18 PM

Quote from: iGotSpots on September 14, 2015, 09:48:49 PM

Quote from: forzendiablo on September 14, 2015, 09:12:44 PM

something is wrong here guys....

?

its not stakign to me nor others

Less than 500 blocks per day are found and competition is getting higher by the day

forzendiablo

legendary

Activity: 1526

Merit: 1000

the grandpa of cryptos

Quote from: iGotSpots on September 14, 2015, 09:48:49 PM

Quote from: forzendiablo on September 14, 2015, 09:12:44 PM

something is wrong here guys....

?

its not stakign to me nor others

fonzerrellie

legendary

Activity: 1190

Merit: 1000

Kaspa

my windows wallet hasn't had a hiccup yet... only 1 or 2 orphans since the start as well

iGotSpots

legendary

Activity: 2548

Merit: 1054

CPU Web Mining 🕸️ on webmining.io

Quote from: forzendiablo on September 14, 2015, 09:12:44 PM

something is wrong here guys....

?

forzendiablo

legendary

Activity: 1526

Merit: 1000

the grandpa of cryptos

something is wrong here guys....

MoreBloodWine

legendary

Activity: 1050

Merit: 1001

Quote from: iGotSpots on September 14, 2015, 08:42:45 PM

Quote from: MoreBloodWine on September 14, 2015, 08:41:31 PM

Quote from: iGotSpots on September 14, 2015, 08:31:47 PM

I have two wallets, one on Mint and one on the same OS as you, neither have ever crashed. If anyone else is getting this often you should post, but I very much think this is a local issue

Even if it is local, xp mode and the DEP thing should have stopped it from happening but hasn't and I'm getting frustrated because I have 25k I can't stake ;-/

XP mode was just a guess because I know it works for some people on other coins, BUCKS included, I'm not sure what it actually helps honestly

I might say f'it and do an os wipe and start clean witghb just backing up the various wallet folders. My luck that won't help.. But ya I'm frustrated as all hell.

Topic: ◀ PrimeChain | Verify Prime Numbers | LESS THAN 500 COINS CREATED PER DAY ▶ - page 12. (Read 76749 times)