Primecoin GPU miner: 9.1 CPD on a 280x / pool / 2% dev.fee - page 15.

Stratobitz

legendary

Activity: 1022

Merit: 1010

Quote from: primeGPU on April 28, 2014, 11:00:21 AM

Quote from: Stratobitz on April 28, 2014, 10:46:29 AM

Roughly 16.4 CPD with (4) 280x Cards. 4.1 CPD per card.
So 4 blocks in about 28 hours.

I'm 99% sure it's just a bug in the reporting, but anyway... what number of 10-chains it found?

3 10 ch
2 blocks

Pending confirmation in wallet.

First run was I think 4 10 ch. 2 blocks. Both blocks confirmed.

primeGPU

full member

Activity: 196

Merit: 100

Quote from: Stratobitz on April 28, 2014, 10:46:29 AM

Roughly 16.4 CPD with (4) 280x Cards. 4.1 CPD per card.
So 4 blocks in about 28 hours.

I'm 99% sure it's just a bug in the reporting, but anyway... what number of 10-chains it found?
What CPD did you have with version 1.4?

ozzy1926

sr. member

Activity: 378

Merit: 250

Quote from: Stratobitz on April 28, 2014, 10:46:29 AM

Quote from: primeGPU on April 28, 2014, 10:22:43 AM

Quote from: kev7112001 on April 28, 2014, 10:14:29 AM

i get 5.6 CPD on 2 290x's with 2 opterons x6 at 2ghz cpuusage 9 up doesnt really change anything
4.6 with 2 7970's on a fx-8320 at 4.2ghz
and 2.3 with 1 7970 with a 3.8ghz phenom ii

but i do have to restart the miner after a while still its random on each rig

What core/mem clocks do you use?

Quote from: kev7112001 on April 28, 2014, 10:14:29 AM

are there any specific ports that i should not be using

The paid version uses 4646 and 4647, and no specific ports are used in the free version.

2 more blocks. New adjustments I made yield same as before.

Roughly 16.4 CPD with (4) 280x Cards. 4.1 CPD per card.

So 4 blocks in about 28 hours. Is the source available for this?

how you manage to do 16.4CPD with 4x 280x?

Stratobitz

legendary

Activity: 1022

Merit: 1010

Quote from: primeGPU on April 28, 2014, 10:22:43 AM

Quote from: kev7112001 on April 28, 2014, 10:14:29 AM

i get 5.6 CPD on 2 290x's with 2 opterons x6 at 2ghz cpuusage 9 up doesnt really change anything
4.6 with 2 7970's on a fx-8320 at 4.2ghz
and 2.3 with 1 7970 with a 3.8ghz phenom ii

but i do have to restart the miner after a while still its random on each rig

What core/mem clocks do you use?

Quote from: kev7112001 on April 28, 2014, 10:14:29 AM

are there any specific ports that i should not be using

The paid version uses 4646 and 4647, and no specific ports are used in the free version.

2 more blocks. New adjustments I made yield same as before.

Roughly 16.4 CPD with (4) 280x Cards. 4.1 CPD per card.

So 4 blocks in about 28 hours. Is the source available for this?

primeGPU

full member

Activity: 196

Merit: 100

Quote from: kev7112001 on April 28, 2014, 10:14:29 AM

i get 5.6 CPD on 2 290x's with 2 opterons x6 at 2ghz cpuusage 9 up doesnt really change anything
4.6 with 2 7970's on a fx-8320 at 4.2ghz
and 2.3 with 1 7970 with a 3.8ghz phenom ii

but i do have to restart the miner after a while still its random on each rig

What core/mem clocks do you use?

Quote from: kev7112001 on April 28, 2014, 10:14:29 AM

are there any specific ports that i should not be using

The paid version uses 4646 and 4647, and no specific ports are used in the free version.

kev7112001

sr. member

Activity: 479

Merit: 250

i get 5.6 CPD on 2 290x's with 2 opterons x6 at 2ghz cpuusage 9 up doesnt really change anything
4.6 with 2 7970's on a fx-8320 at 4.2ghz
and 2.3 with 1 7970 with a 3.8ghz phenom ii

but i do have to restart the miner after a while still its random on each rig

are there any specific ports that i should not be using

ozzy1926

sr. member

Activity: 378

Merit: 250

Quote from: primeGPU on April 28, 2014, 10:06:27 AM

Quote from: ozzy1926 on April 28, 2014, 09:56:44 AM

yes, sorry for double post is this normal for your miner to create a new adress ?

Yes, that's how it was done in hp11 on which we're basing this functionallity.
We didn't recieve complains about this before, but if it's an issue for you, we will add it to our todo list.

no thats ok, i was just worried when i couldnt see the transaction on my adress but when i close the program and opened the wallet i see my coins

primeGPU

full member

Activity: 196

Merit: 100

Quote from: ozzy1926 on April 28, 2014, 09:56:44 AM

yes, sorry for double post is this normal for your miner to create a new adress ?

Yes, that's how it was done in hp11 on which we're basing this functionallity.
We didn't recieve complains about this before, but if it's an issue for you, we will add it to our todo list.

ozzy1926

sr. member

Activity: 378

Merit: 250

Quote from: primeGPU on April 28, 2014, 09:53:04 AM

Quote from: ozzy1926 on April 28, 2014, 09:29:31 AM

i dont see the any coin transaction in my wallet Huh

?

Is this the wallet?
https://coinplorer.com/XPM/Addresses/AT7e6QZX8c4caUqvGU1viVg4MAD89E8jES

yes, sorry for double post is this normal for your miner to create a new adress ?Because my adress was AYRox9zxnKmHf5gCGhKpP6t9KGU54okTUe with the claymores

primeGPU

full member

Activity: 196

Merit: 100

Quote from: ozzy1926 on April 28, 2014, 09:29:31 AM

i dont see the any coin transaction in my wallet Huh

?

Is this the wallet?
https://coinplorer.com/XPM/Addresses/AT7e6QZX8c4caUqvGU1viVg4MAD89E8jES

ozzy1926

sr. member

Activity: 378

Merit: 250

is this normal to miner get a new wallet adress when find a block?

ozzy1926

sr. member

Activity: 378

Merit: 250

Quote from: primeGPU on April 28, 2014, 09:20:09 AM

Quote from: ozzy1926 on April 28, 2014, 09:15:18 AM

what should i look for, to know which block i found?

Search for 'proof-of-work found'. Somewhere below this line will be a 'SetBestChain' record with the new 'height' value.

i dont see the any coin transaction in my wallet Huh

?

Code:

SetBestChain: new best=da5a69afae444e8c74bfe0c2724bf6b6becdf8e461e977e537551ba41295e30b  height=515086  difficulty=10.839885 log2Work=30.423826  log2ChainWork=46.824771  tx=1117138  date=2014-04-28 14:00:11 progress=0.011540
ProcessBlock: ACCEPTED
getblocks 229234 to 8a64ccb9c7655b4e0d8ef5a8e42b17327040b24dd893c12dd790f065ebb9afa6 limit 500
  getblocks stopping at limit 229733 c3de27dac68a7fd3df549d44f7b1cb5046d85457caa9192e9655d4ee444760dd
getblocks 229235 to d88f202dce924243dd566fa498a85e58d3d5674e2cfa56eb391956a19705c420 limit 500
  getblocks stopping at 229253 d88f202dce924243dd566fa498a85e58d3d5674e2cfa56eb391956a19705c420
received getdata for: block c3de27dac68a7fd3df549d44f7b1cb5046d85457caa9192e9655d4ee444760dd
getblocks -1 to 0000000000000000000000000000000000000000000000000000000000000000 limit 500
getblocks 229235 to c3de27dac68a7fd3df549d44f7b1cb5046d85457caa9192e9655d4ee444760dd limit 500
  getblocks stopping at 229733 c3de27dac68a7fd3df549d44f7b1cb5046d85457caa9192e9655d4ee444760dd
getblocks 229235 to 8a64ccb9c7655b4e0d8ef5a8e42b17327040b24dd893c12dd790f065ebb9afa6 limit 500
  getblocks stopping at limit 229734 2c9d9ac70c1825a98958838bef8660ea3f7b0614614c1193b4edd69508c3b2c0
getblocks -1 to 0000000000000000000000000000000000000000000000000000000000000000 limit 500
getblocks -1 to 0000000000000000000000000000000000000000000000000000000000000000 limit 500
PrimecoinMiner: 
PrimecoinMiner:
proof-of-work found  
  target: 0a.d7024d
  multiplier: 1b2d4c6354c
  CBlock(hash=b1b58bf6ae972f4e35bedd70457fc53dd1f6e55e975e2a8fbb8ccaf37dd249cd, hashBlockHeader=ac3be552579801fae9e727740c474fee8b7d492b1ecf50aa18be32b0118f41f2, ver=2, hashPrevBlock=da5a69afae444e8c74bfe0c2724bf6b6becdf8e461e977e537551ba41295e30b, hashMerkleRoot=aec88b86d918292b058955c5186f9c8836b61e48174259762f841313d7d7a74d, nTime=1398693598, nBits=0ad7024d, nNonce=710225248, vtx=1)
  CTransaction(hash=aec88b86d918292b058955c5186f9c8836b61e48174259762f841313d7d7a74d, ver=1, vin.size=1, vout.size=2, nLockTime=0)
    CTxIn(COutPoint(0000000000000000000000000000000000000000000000000000000000000000, 4294967295), coinbase 030fdc07010100062f503253482f)
    CTxOut(nValue=7.65000000, scriptPubKey=02cbef956b5b31db945407ded37c8b)
    CTxOut(nValue=0.85000000, scriptPubKey=OP_DUP OP_HASH160 fbf840d75326)
  vMerkleTree: aec88b86d918292b058955c5186f9c8836b61e48174259762f841313d7d7a74d 
generated 7.65
keypool keep 2
AddToWallet aec88b86d918292b058955c5186f9c8836b61e48174259762f841313d7d7a74d  new
Committing 1 changed transactions to coin database...

primeGPU

full member

Activity: 196

Merit: 100

Quote from: ozzy1926 on April 28, 2014, 09:15:18 AM

what should i look for, to know which block i found?

Search for 'proof-of-work found'. Somewhere below this line will be a 'SetBestChain' record with the new 'height' value.

ozzy1926

sr. member

Activity: 378

Merit: 250

Quote from: primeGPU on April 28, 2014, 09:07:29 AM

Quote from: ozzy1926 on April 28, 2014, 09:03:39 AM

it says block found see debug.log for details. where can i see the debug.log?

%AppData%\Roaming\Primecoin\

what should i look for, to know which block i found?

primeGPU

full member

Activity: 196

Merit: 100

Quote from: ozzy1926 on April 28, 2014, 09:03:39 AM

it says block found see debug.log for details. where can i see the debug.log?

%AppData%\Roaming\Primecoin\

ozzy1926

sr. member

Activity: 378

Merit: 250

Quote from: primeGPU on April 28, 2014, 08:27:09 AM

Quote from: ozzy1926 on April 28, 2014, 08:15:28 AM

thanks also i am using catalyst 14.3 is that ok or the driver version must be bigger than 14.3?

We're testing it with 14.3, so yes, it is ok.

it says block found see debug.log for details. where can i see the debug.log?

primeGPU

full member

Activity: 196

Merit: 100

Quote from: ozzy1926 on April 28, 2014, 08:15:28 AM

thanks also i am using catalyst 14.3 is that ok or the driver version must be bigger than 14.3?

We're testing it with 14.3, so yes, it is ok.

ozzy1926

sr. member

Activity: 378

Merit: 250

Quote from: primeGPU on April 28, 2014, 06:36:31 AM

Quote from: ozzy1926 on April 28, 2014, 02:31:41 AM

i am confused:i was using 950-960 watts from the wall (3x290)with claymore v 4.0 total cpd was around 7.5-7.7and usually i was finding 2 blocks per day untill today.With this i am using 820-830 watts from the wall cpd is 8.74.Will this be faster?

Yes, it will be faster.

thanks also i am using catalyst 14.3 is that ok or the driver version must be bigger than 14.3?

primeGPU

full member

Activity: 196

Merit: 100

Quote from: csa1234 on April 28, 2014, 07:59:15 AM

for some unknown reason after 24 hours of mining there was zero 10-ch found and zero block, i dont know whats going on, before when i first started it found 4 10-ch + 1 block after that, 24 hours later nothing.... driver is 14.4

PM sent

csa1234

full member

Activity: 289

Merit: 100

O2-Protocol.com Carbon Offset DeFi

for some unknown reason after 24 hours of mining there was zero 10-ch found and zero block, i dont know whats going on, before when i first started it found 4 10-ch + 1 block after that, 24 hours later nothing.... driver is 14.4

Topic: Primecoin GPU miner: 9.1 CPD on a 280x / pool / 2% dev.fee - page 15. (Read 100955 times)