Primecoin GPU miner: 9.1 CPD on a 280x / pool / 2% dev.fee - page 14.

jgle

member

Activity: 85

Merit: 10

Quote from: primeGPU on April 29, 2014, 07:56:25 AM

Quote from: Nico59 on April 29, 2014, 07:42:33 AM

Hello I'm currently testing the free version.
Is it normal that I can't run the wallet simultaneous to the miner ?

Yes, the miner locks the database.

Without the addition of wallet address? If you find a piece of XPM how to purse?
SOLO free version of the program can read address is automatically transferred to the wallet, purse the inside address?

jgle

member

Activity: 85

Merit: 10

Quote from: Nico59 on April 29, 2014, 08:20:05 AM

Quote from: jgle on April 29, 2014, 08:05:35 AM

How to use SOLO Free Edition?

Synchronize your wallet, put a primecoin.conf in your AppData/Roaming/Primecoin folder with :
rpcuser=user
rpcpassword=x
rpcallowip=127.0.0.1
rpcport=7332
server=1

close your wallet and run the miner matching your card.

1, server configuration file (the username and password of IP port)
2, run the wallet file update data.
3, run SOLO version of the program
The problem is: 1, as long as the operation of the wallet and SOLO programs can? Don't run in the server? 2 procedures

csa1234

full member

Activity: 287

Merit: 100

O2-Protocol.com Carbon Offset DeFi

same happened again, after 8 hours of mining (all night) all it found was 1x 10-ch block which was found at 10 min of starting mining, after then, nothing... any support is welcome, cant even find driver 14.3 any more since ATI posted 14.4

Nico59

newbie

Activity: 3

Merit: 0

Quote from: jgle on April 29, 2014, 08:05:35 AM

How to use SOLO Free Edition?

Synchronize your wallet, put a primecoin.conf in your AppData/Roaming/Primecoin folder with :
rpcuser=user
rpcpassword=x
rpcallowip=127.0.0.1
rpcport=7332
server=1

close your wallet and run the miner matching your card.

jgle

member

Activity: 85

Merit: 10

Quote from: primeGPU on April 29, 2014, 07:56:25 AM

Quote from: Nico59 on April 29, 2014, 07:42:33 AM

Hello I'm currently testing the free version.
Is it normal that I can't run the wallet simultaneous to the miner ?

Yes, the miner locks the database.

How to use SOLO Free Edition?

primeGPU

full member

Activity: 196

Merit: 100

Quote from: Nico59 on April 29, 2014, 07:42:33 AM

Hello I'm currently testing the free version.
Is it normal that I can't run the wallet simultaneous to the miner ?

Yes, the miner locks the database.

Nico59

newbie

Activity: 3

Merit: 0

Hello I'm currently testing the free version.
Is it normal that I can't run the wallet simultaneous to the miner ?

primer10

sr. member

Activity: 249

Merit: 250

btw, remember to encrypt your wallet (more so if you are using your main wallet) when you turn on the RPC. Some ppl might not be aware that rogue program can issue commands to transfer your coins out. Need not be the miner itself.

kev7112001

sr. member

Activity: 479

Merit: 250

Quote from: Bkos83 on April 29, 2014, 04:03:04 AM

Quote from: kev7112001 on April 29, 2014, 03:36:44 AM

Quote from: Bkos83 on April 29, 2014, 02:37:12 AM

help! run prime-gpu-so-7950.2.01 and i have error:
http://prntscr.com/3eh633

did u even read it

basically it says u have no conf file which you need for solomining anycoin
eg

rpcuser=xxxxxxx
rpcpassword=xxxxxxxxxxx
rpcallowip=127.0.0.1
rpcport=xxxxxxx
server=1

where I specify my wallet?

u make a text file with that and rename it to primecoin.conf
then put that in the appdata/roaming primecoin folder

u can use any name/password

make sure u have show extensions enable in your folders so it wont be like this primecoin.conf.txt

in explorer go to folder and search options from the organize menu then click view under that will be hide extensions for known file types un check that

jgle

member

Activity: 85

Merit: 10

I download this version of the prime-gpu-free, which is free of charge! But I put him such errors in BAT:
Error: incorrect rpcuser or rpcpassword (authorization failed) I set the IP port user name password wallet also set up a wallet
Prime-gpu-so-280x.2.01 -o 127.0.0.1:7332 -u uuio -p 123 -xpm AUkNcEgAH7dZAM8WaNt8zVGXP77oK7wQgJ -cpuusage=8
Pause
Help me: Thank you

Bkos83

newbie

Activity: 3

Merit: 0

Quote from: kev7112001 on April 29, 2014, 03:36:44 AM

Quote from: Bkos83 on April 29, 2014, 02:37:12 AM

help! run prime-gpu-so-7950.2.01 and i have error:
http://prntscr.com/3eh633

did u even read it

basically it says u have no conf file which you need for solomining anycoin
eg

rpcuser=xxxxxxx
rpcpassword=xxxxxxxxxxx
rpcallowip=127.0.0.1
rpcport=xxxxxxx
server=1

where I specify my wallet?

kev7112001

sr. member

Activity: 479

Merit: 250

Quote from: Bkos83 on April 29, 2014, 02:37:12 AM

help! run prime-gpu-so-7950.2.01 and i have error:
http://prntscr.com/3eh633

did u even read it

basically it says u have no conf file which you need for solomining anycoin
eg

rpcuser=xxxxxxx
rpcpassword=xxxxxxxxxxx
rpcallowip=127.0.0.1
rpcport=xxxxxxx
server=1

Bkos83

newbie

Activity: 3

Merit: 0

help! run prime-gpu-so-7950.2.01 and i have error:
http://prntscr.com/3eh633

csa1234

full member

Activity: 287

Merit: 100

O2-Protocol.com Carbon Offset DeFi

Quote from: primeGPU on April 29, 2014, 12:02:26 AM

Quote from: csa1234 on April 28, 2014, 11:07:26 PM

this is not my best day... miner stats shows 2x blocks + 3x 10-ch found.... however on my Primecoin wallet, nothing was mined, no BLOCK at all.... orpahned?

Please send me %AppData%\Roaming\Primecoin\debug.log so I could check what happened.

e-mail sent

primeGPU

full member

Activity: 196

Merit: 100

Quote from: csa1234 on April 28, 2014, 11:07:26 PM

this is not my best day... miner stats shows 2x blocks + 3x 10-ch found.... however on my Primecoin wallet, nothing was mined, no BLOCK at all.... orpahned?

Please send me %AppData%\Roaming\Primecoin\debug.log so I could check what happened.

csa1234

full member

Activity: 287

Merit: 100

O2-Protocol.com Carbon Offset DeFi

this is not my best day... miner stats shows 2x blocks + 3x 10-ch found.... however on my Primecoin wallet, nothing was mined, no BLOCK at all.... orpahned?

csa1234

full member

Activity: 287

Merit: 100

O2-Protocol.com Carbon Offset DeFi

it does update, im retrying again...

primeGPU

full member

Activity: 196

Merit: 100

Quote from: csa1234 on April 28, 2014, 02:58:05 PM

primeGPU the miner seems to get freezed after a few hours... what could cause this? could this be the core clock or mem clock? im using 1150 core/1500 mem

Does it update 'Pass' value? If not, it indeed stopped mining. The clocks are probably ok for a good card, but each unit is different, so it could be too OC'ed.

csa1234

full member

Activity: 287

Merit: 100

O2-Protocol.com Carbon Offset DeFi

primeGPU the miner seems to get freezed after a few hours, miners keep mining, pass keep moving and so does all the numbers on the miner stats, but no more block or chain are found, ... what could cause this? could this be the core clock or mem clock? im using 1150 core/1500 mem Catalyst 14.4

kev7112001

sr. member

Activity: 479

Merit: 250

Quote from: primeGPU on April 28, 2014, 11:22:43 AM

Quote from: kev7112001 on April 28, 2014, 11:14:29 AM

i get 5.6 CPD on 2 290x's with 2 opterons x6 at 2ghz cpuusage 9 up doesnt really change anything
4.6 with 2 7970's on a fx-8320 at 4.2ghz
and 2.3 with 1 7970 with a 3.8ghz phenom ii

but i do have to restart the miner after a while still its random on each rig

What core/mem clocks do you use?

Quote from: kev7112001 on April 28, 2014, 11:14:29 AM

are there any specific ports that i should not be using

The paid version uses 4646 and 4647, and no specific ports are used in the free version.

1120/1400 on 290x
1185/1785 7970's

still playing with the clocks for each type of cpu

Topic: Primecoin GPU miner: 9.1 CPD on a 280x / pool / 2% dev.fee - page 14. (Read 100895 times)