Topic: Primecoin GPU miner: 9.1 CPD on a 280x / pool / 2% dev.fee - page 13. (Read 100895 times)
ye please add pool support with 10% fee
I get an error as well if I use the primegpu file in 2.02. Also, CPU usage seems to be lower than previous versions at the same usage setting.
Will this next version have a pool option?
We have some progress in this direction, but I'm not sure about the next version.Is the default -cpuusage=6?
Yep.In the future, will there include hardware stats, ie. temp, clock speed, etc...
It's in the todo list, but with low priority.I get an error run the primegpu.exe and have to use the one from the v2.00 to get it working.
What kind of an error? I was under impression that it's exactly the same file as in 2.00. 
I have 3 different models of cards in one machine. Is there a way to run separate server instances for each card or a way to differentiate settings for each card? Any changes in the works for this type of situation?
Earlier today I planned to include this functionallity in today's build. 
Most probably it'll be included in the next one.
Will this next version have a pool option? Is the default -cpuusage=6? In the future, will there include hardware stats, ie. temp, clock speed, etc...
I get an error run the primegpu.exe and have to use the one from the v2.00 to get it working.
Good news! Thanks.
I have 3 different models of cards in one machine. Is there a way to run separate server instances for each card or a way to differentiate settings for each card? Any changes in the works for this type of situation?
Earlier today I planned to include this functionallity in today's build. Most probably it'll be included in the next one.
I have 3 different models of cards in one machine. Is there a way to run separate server instances for each card or a way to differentiate settings for each card? Any changes in the works for this type of situation?
Updated and did see performance increases with the update. Thanks again!
Updated and did see performance increases with the update. Thanks again!
any speed increase for 290?
It should be 15% for any card.any speed increase for 290?
It should be 15% for any card. Version 2.02 is available:
- 15% speedup, up to 2.9 CPD on a 280x
- "-cpuusage=0" command-line option for low-end CPUs
Dowload free version:
http://primegpu.com/files/prime-gpu-free.rar
Download paid version:
http://primegpu.com/files/prime-gpu-package.zip
- 15% speedup, up to 2.9 CPD on a 280x
- "-cpuusage=0" command-line option for low-end CPUs
Dowload free version:
http://primegpu.com/files/prime-gpu-free.rar
Download paid version:
http://primegpu.com/files/prime-gpu-package.zip
any speed increase for 290?
Version 2.02 is available:
- 15% speedup, up to 2.9 CPD on a 280x
- "-cpuusage=0" command-line option for low-end CPUs
Dowload free version:
http://primegpu.com/files/prime-gpu-free.rar
Download paid version:
http://primegpu.com/files/prime-gpu-package.zip
Edit: GPU usage is now 99%, so you may need to lower core clock a bit.
- 15% speedup, up to 2.9 CPD on a 280x
- "-cpuusage=0" command-line option for low-end CPUs
Dowload free version:
http://primegpu.com/files/prime-gpu-free.rar
Download paid version:
http://primegpu.com/files/prime-gpu-package.zip
Edit: GPU usage is now 99%, so you may need to lower core clock a bit.
Can i connect couple of rigs to one client/wallet?
like claymore's miner in this graph?
We'll try to make something similar in a future version. like claymore's miner in this graph?
Can i connect couple of rigs to one client/wallet?
like claymore's miner in this graph?
please share with my your bat files for couple of 280xs with pentium haswell
like claymore's miner in this graph?
please share with my your bat files for couple of 280xs with pentium haswell
Ask a few questions: 1, CPD TIME these parameters is what mean? The better value? For example, 280X is how much?
2, the CpuUsage parameter is the "-cpuusage=X" in BAT?
3 this is the 3X280X 1150/1500 14.3
Bat: prime-gpu-so-280x.2.01 pause
Primecoin GPU miner ver. 2.01
Position
Mining time: 0.68 hours
Est. Average Chains Per Day (CPD): 3.54
Est. Spot Chains Per Day (CPD): 3.82
Pass: 925
GPU #0 time: 244
GPU #1 time: 229
GPU #2 time: 204
10-ch found: 0 expected: 0.101
Blocks found: 0 expected: 0.010
Note: Catalyst 14.3+ is required. No blocks will be found with older versions
Shown above is correct?
Your CPD is 1/2 of what it should be. Check you CPU usage, it should be under 60% - probably it's the bottleneck.2, the CpuUsage parameter is the "-cpuusage=X" in BAT?
3 this is the 3X280X 1150/1500 14.3
Bat: prime-gpu-so-280x.2.01 pause
Primecoin GPU miner ver. 2.01
Position
Mining time: 0.68 hours
Est. Average Chains Per Day (CPD): 3.54
Est. Spot Chains Per Day (CPD): 3.82
Pass: 925
GPU #0 time: 244
GPU #1 time: 229
GPU #2 time: 204
10-ch found: 0 expected: 0.101
Blocks found: 0 expected: 0.010
Note: Catalyst 14.3+ is required. No blocks will be found with older versions
Shown above is correct?
We will publish a new version today. Besides a 15-20% speedup, it will have support for "-cpuusage=0" command-line option that will allow the miner to run with good performance on low-end CPUs.
Ask a few questions: 1, CPD TIME these parameters is what mean? The better value? For example, 280X is how much?
2, the CpuUsage parameter is the "-cpuusage=X" in BAT?
3 this is the 3X280X 1150/1500 14.3
Bat: prime-gpu-so-280x.2.01 pause
Primecoin GPU miner ver. 2.01
Position
Mining time: 0.68 hours
Est. Average Chains Per Day (CPD): 3.54
Est. Spot Chains Per Day (CPD): 3.82
Pass: 925
GPU #0 time: 244
GPU #1 time: 229
GPU #2 time: 204
10-ch found: 0 expected: 0.101
Blocks found: 0 expected: 0.010
Note: Catalyst 14.3+ is required. No blocks will be found with older versions
Shown above is correct?
2, the CpuUsage parameter is the "-cpuusage=X" in BAT?
3 this is the 3X280X 1150/1500 14.3
Bat: prime-gpu-so-280x.2.01 pause
Primecoin GPU miner ver. 2.01
Position
Mining time: 0.68 hours
Est. Average Chains Per Day (CPD): 3.54
Est. Spot Chains Per Day (CPD): 3.82
Pass: 925
GPU #0 time: 244
GPU #1 time: 229
GPU #2 time: 204
10-ch found: 0 expected: 0.101
Blocks found: 0 expected: 0.010
Note: Catalyst 14.3+ is required. No blocks will be found with older versions
Shown above is correct?
I don't know when I find the block, how to get the block! Transferred to my wallet?
Yes, it will be in your wallet. You can stop the miner and open your wallet - it'll be there.And Claymore SOLO settings are not the same as! I will try, see what good performance! Thank you very much
I don't know when I find the block, how to get the block! Transferred to my wallet?
Yes, it will be in your wallet. You can stop the miner and open your wallet - it'll be there.
how many blocks have you guys found since free version out?
Hello I'm currently testing the free version.
Is it normal that I can't run the wallet simultaneous to the miner ?
Yes, the miner locks the database.Is it normal that I can't run the wallet simultaneous to the miner ?
Sorry what do you mean and actually what was the qn? wallet and miner has to be running? wallet should run first of course
I don't know when I find the block, how to get the block! Transferred to my wallet?
Hello I'm currently testing the free version.
Is it normal that I can't run the wallet simultaneous to the miner ?
Yes, the miner locks the database.Is it normal that I can't run the wallet simultaneous to the miner ?
Sorry what do you mean and actually what was the qn? wallet and miner has to be running? wallet should run first of course
Jump to: