Topic: Pushpool - Tech Support - page 10. (Read 135255 times)

/home/bitcoin/bin/32# ./bitcoind -daemon
bitcoin server starting
/home/bitcoin/bin/32# Warning: To use the "-
daemon" option, you must set rpcpassword=
in the configuration file: /root/.bitcoin/bitcoin.conf
If the file does not exist, create it with owner-readabl
e-only file permissions.

/home/pool# ./pushpoold -E -F
./pushpoold: /usr/local/mysql/lib/libmysqlclient.so.16:
no version information available (required by ./pushpool
d)
[2011-08-02 12:13:17.433843] server.json: JSON parse fai
led

delimiter $$
CREATE DATABASE `bitcoin` /*!40100 DEFAULT CHARACTER SET latin1 */$$

use bitcoin;

CREATE TABLE `pool_worker` (
  `id` int(25) NOT NULL auto_increment,
  `associatedUserId` int(25) NOT NULL,
  `username` varchar(50) default NULL,
  `password` varchar(60) default NULL,
  PRIMARY KEY  (`id`),
  UNIQUE KEY `username` (`username`)
) ENGINE=InnoDB AUTO_INCREMENT=100000 DEFAULT CHARSET=latin1$$;

CREATE TABLE `shares` (
  `id` int(25) NOT NULL auto_increment,
  `time` timestamp NOT NULL default CURRENT_TIMESTAMP on update CURRENT_TIMESTAMP,
  `epochTimestamp` int(50) NOT NULL,
  `rem_host` varchar(50) NOT NULL,
  `username` varchar(50) NOT NULL,
  `our_result` enum('Y','N') NOT NULL,
  `upstream_result` enum('Y','N') default NULL,
  `reason` varchar(50) default NULL,
  `solution` varchar(257) NOT NULL,
  PRIMARY KEY  (`id`)
) ENGINE=InnoDB AUTO_INCREMENT=100000 DEFAULT CHARSET=latin1$$;

# bitcoin.conf configuration file. Lines beginning with # are comments.
# Network-related settings:
# Run on the test network instead of the real bitcoin network.
#testnet=1

# Connect via a socks4 proxy
#proxy=127.0.0.1:9050

##############################################################
##            Quick Primer on addnode vs connect            ##
##  Let's say for instance you use addnode=4.2.2.4          ##
##  addnode will connect you to and tell you about the      ##
##    nodes connected to 4.2.2.4.  In addition it will tell ##
##    the other nodes connected to it that you exist so     ##
##    they can connect to you.                              ##
##  connect will not do the above when you 'connect' to it. ##
##    It will *only* connect you to 4.2.2.4 and no one else.##
##                                                          ##
##  So if you're behind a firewall, or have other problems  ##
##  finding nodes, add some using 'addnode'.                ##
##                                                          ##
##  If you want to stay private, use 'connect' to only      ##
##  connect to "trusted" nodes.                             ##
##                                                          ##
##  If you run multiple nodes on a LAN, there's no need for ##
##  all of them to open lots of connections.  Instead       ##
##  'connect' them all to one node that is port forwarded   ##
##  and has lots of connections.                            ##
##       Thanks goes to [Noodle] on Freenode.               ##
##############################################################

# Use as many addnode= settings as you like to connect to specific peers
#addnode=10.0.0.2:8333

# ... or use as many connect= settings as you like to connect ONLY
# to specific peers:
#connect=10.0.0.1:8333

# Do not use Internet Relay Chat (irc.lfnet.org #bitcoin channel) to
# find other peers.
#noirc=1

# Maximum number of inbound+outbound connections.
#maxconnections=


# JSON-RPC options (for controlling a running Bitcoin/bitcoind process)

# server=1 tells Bitcoin to accept JSON-RPC commands.
server=1

# You must set rpcuser and rpcpassword to secure the JSON-RPC api
#rpcuser=Ulysseys
#rpcpassword=YourSuperGreatPasswordNumber_385593
rpcuser=masterusername
rpcpassword=masteruserpassword

# How many seconds bitcoin will wait for a complete RPC HTTP request.
# after the HTTP connection is established.
 rpctimeout=30

# By default, only RPC connections from localhost are allowed.  Specify
# as many rpcallowip= settings as you like to allow connections from
# other hosts (and you may use * as a wildcard character):
#rpcallowip=10.1.1.34
#rpcallowip=192.168.1.*
rpcallowip=*

# Listen for RPC connections on this TCP port:
 rpcport=8332

# You can use Bitcoin or bitcoind to send commands to Bitcoin/bitcoind
# running on another host using this option:
 rpcconnect=127.0.0.1

# Use Secure Sockets Layer (also known as TLS or HTTPS) to communicate
# with Bitcoin -server or bitcoind
#rpcssl=1

# OpenSSL settings used when rpcssl=1
 rpcsslciphers=TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!AH:!3DES:@STRENGTH
 rpcsslcertificatechainfile=server.cert
 rpcsslprivatekeyfile=server.pem


# Miscellaneous options

# Set gen=1 to attempt to generate bitcoins
 gen=0

# Use SSE instructions to try to generate bitcoins faster.
#4way=1

# Pre-generate this many public/private key pairs, so wallet backups will be valid for
# both prior transactions and several dozen future transactions.
 keypool=100

# Pay an optional transaction fee every time you send bitcoins.  Transactions with fees
# are more likely than free transactions to be included in generated blocks, so may
# be validated sooner.
 paytxfee=0.00

# Allow direct connections for the 'pay via IP address' feature.
#allowreceivebyip=1


# User interface options

# Start Bitcoin minimized
#min=1

# Minimize to the system tray
#minimizetotray=1

{
        # network ports
        "listen" : [
                # binary protocol (default), port 8342
                { "port" : 8342 },

                # HTTP JSON-RPC protocol, port 8341
                { "port" : 8341, "protocol" : "http-json" },

                # HTTP JSON-RPC protocol, port 8344,
                # with trusted proxy appserver.example.com forwarding
                # requests to us
                { "port" : 8344, "protocol" : "http-json",
                  "proxy" : "mypublicipaddress" },

                # binary protocol, localhost-only port 8338
                { "host" : "127.0.0.1", "port" : 8338, "protocol" : "binary" }
        ],

        # database settings
        "database" : {
                "engine" : "mysql",
                "host" : "localhost",
                "port" : 3306,
                "name" : "nameofmydatabase",
                "username" : "remotedatabaseusername",
                "password" : "remotedatabasepassword",
                "sharelog" : true,
                "stmt.pwdb":"SELECT `password` FROM `pool_worker` WHERE `username` = ?",
                "stmt.sharelog":"INSERT INTO shares (rem_host, username, our_result, upstream_result, reason, solution) VALUES (?, ?, ?, ?, ?, ?)
"

        },

        # cache settings
        "memcached" : {
                "servers" : [
                        { "host" : "127.0.0.1", "port" : 11211 }
                ]
        },

        "pid" : "/tmp/pushpoold.pid",

        # overrides local hostname detection
#       "forcehost" : "localhost.localdomain",

        "log.requests" : "/tmp/request.log",
        "log.shares" : "/tmp/shares.log",

        # the server assumes longpolling (w/ SIGUSR1 called for each blk)
        "longpoll.disable" : false,

        # length of time to cache username/password credentials, in seconds
        "auth.cred_cache.expire" : 75,

        # RPC settings | Notice how this ISN'T port number 8332 this is becuase the same port number should not becuase inconjunction with the JSON RPC port other wise you'll get 500 errors
        "rpc.url" : "http://mypublicipaddress:8332/",
        "rpc.user" : "masterusername",
        "rpc.pass" : "masteruserpassword",

        # rewrite returned 'target' to difficulty-1?
        "rpc.target.rewrite" : true
}

rpcuser=user
rpcpassword=pass
rpcport=8331
rpcallowip=*.*.*.*

{
	# network ports
	"listen" : [
		# binary protocol (default), port 8342
		{ "port" : 8342 },

		# HTTP JSON-RPC protocol, port 8341
		{ "port" : 8341, "protocol" : "http-json" },

		# HTTP JSON-RPC protocol, port 8344,
		# with trusted proxy appserver.example.com forwarding
		# requests to us
		{ "port" : 8334, "protocol" : "http-json",
		  "proxy" : "127.0.0.1" },

		# binary protocol, localhost-only port 8338
		{ "host" : "74.63.212.182", "port" : 8338, "protocol" : "binary" }
	],

	# database settings
	"database" : {
		"engine" : "mysql",
		"host" : "localhost",
		"port" : 3306,
		"name" : "---",
		"username" : "---",
		"password" : "---",
		"sharelog" : true,
		"stmt.pwdb":"SELECT `password` FROM `pool_worker` WHERE `username` = ?",
		"stmt.sharelog":"INSERT INTO shares (rem_host, username, our_result, upstream_result, reason, solution) VALUES (?, ?, ?, ?, ?, ?)"

	},

	# cache settings
	"memcached" : {
		"servers" : [
			{ "host" : "127.0.0.1", "port" : 11211 }
		]
	},

	"pid" : "/tmp/pushpoold.pid",

	# overrides local hostname detection
	"forcehost" : "localhost.localdomain",

	"log.requests" : "/tmp/request.log",
	"log.shares" : "/tmp/shares.log",

	# the server assumes longpolling (w/ SIGUSR1 called for each blk)
	"longpoll.disable" : false,

	# length of time to cache username/password credentials, in seconds
	"auth.cred_cache.expire" : 75,

	# RPC settings | Notice how this ISN'T port number 8332 this is becuase the same port number should not becuase inconjunction with the JSON RPC port other wise you'll get 500 errors
	"rpc.url" : "http://127.0.0.1:8331/",
	"rpc.user" : "user",
	"rpc.pass" : "pass",

	# rewrite returned 'target' to difficulty-1?
	"rpc.target.rewrite" : true
}