Topic: R9 Nano Modded Rom - page 2. (Read 60873 times)
Eliovp which ones of your roms would you recommend? Iv seen you posted a few roms on 1st page and also somewhere on page 15 i think? Which drivers are best?
I have my nano's running with a custom timing which also improves quite a bit.
Due to the work that i have already put into all of this, i'm not going to release this for free.
I will however release other things in the future
Greetings!
haha lulz "its not free" custom bios inst hard job Due to the work that i have already put into all of this, i'm not going to release this for free.
I will however release other things in the future
Greetings!
Well, no one is stopping you from doing it yourself
400 MHz timing (or even custom timings if you can do it) in conjunction with 500 MHz memory frequency plus the lowest possible core voltage that allows you to run 900MHz core clock - this is sweet spot for fiji. I confirm that.
What drivers are best? Iv tried alot od different drivers and it doesnt seem to make any difference?
I have my nano's running with a custom timing which also improves quite a bit.
Due to the work that i have already put into all of this, i'm not going to release this for free.
I will however release other things in the future
Greetings!
haha lulz "its not free" custom bios inst hard job Due to the work that i have already put into all of this, i'm not going to release this for free.
I will however release other things in the future
Greetings!
400 MHz timing (or even custom timings if you can do it) in conjunction with 500 MHz memory frequency plus the lowest possible core voltage that allows you to run 900MHz core clock - this is sweet spot for fiji. I confirm that.
Anyone else got any news for the nanos? I mean what is the best setting for mining zec?
I have my nano's running with a custom timing which also improves quite a bit.
Due to the work that i have already put into all of this, i'm not going to release this for free.
I will however release other things in the future
Greetings!
Due to the work that i have already put into all of this, i'm not going to release this for free.
I will however release other things in the future
Greetings!
What speed and wattage are you getting with the new mod?
How much would it cost for the mod?
I should do some new tests as i have made new improvements regarding custom timings.
I will, as soon as i find some time :p
Greetings!
I have my nano's running with a custom timing which also improves quite a bit.
Due to the work that i have already put into all of this, i'm not going to release this for free.
I will however release other things in the future
Greetings!
Due to the work that i have already put into all of this, i'm not going to release this for free.
I will however release other things in the future
Greetings!
What speed and wattage are you getting with the new mod?
How much would it cost for the mod?
Iv found 900 mhz gpu clock and 400 mhz memory clock to be the best setting for the nano. I can only undeevolt -72mv using trixx 3.0 but is there any other program i can use to undervolt further? Or do i gave to make custom bios? If so how to i go about that? Thank you
Hey, sorry for not being very active in my own thread here..
You can just use afterburner (go to settings and unlock those voltages "you'll need to restart though").
After that, you'll be able to go to -100mV (which is also the most stable setting).
Good luck!
Greetings!
Iv found 900 mhz gpu clock and 400 mhz memory clock to be the best setting for the nano. I can only undeevolt -72mv using trixx 3.0 but is there any other program i can use to undervolt further? Or do i gave to make custom bios? If so how to i go about that? Thank you
I cant seem to get msi to work on my nanos... the voltage button is like transparent so cant move slider?
Silly question guys but if you use a custom rom that has undervolt set to lets say -125mv
Lets say you try undervolt that card with custom rom using trixx to -72.... what happens then? Or should we not attemt any other undervolt? Also what is the best undervoltung software? I can only get -72mv using trixx on stock bios
Lets say you try undervolt that card with custom rom using trixx to -72.... what happens then? Or should we not attemt any other undervolt? Also what is the best undervoltung software? I can only get -72mv using trixx on stock bios
that will be -200 mV effectively. I use the MSI afterburner, it is better than trixx.
Silly question guys but if you use a custom rom that has undervolt set to lets say -125mv
Lets say you try undervolt that card with custom rom using trixx to -72.... what happens then? Or should we not attemt any other undervolt? Also what is the best undervoltung software? I can only get -72mv using trixx on stock bios
Lets say you try undervolt that card with custom rom using trixx to -72.... what happens then? Or should we not attemt any other undervolt? Also what is the best undervoltung software? I can only get -72mv using trixx on stock bios
2520h with 7 nanos @1500w -96 volt 1035mhz
What is the speed of the memory?
2520h with 7 nanos @1500w -96 volt 1035mhz
That is very efficient.
2520h with 7 nanos @1500w -96 volt 1035mhz
Is that 400mhz for the memory clock? What is the best undervolt setting?
I get 1270 sol/s using 670 watts at wall using 4x nanos
What are you guys getting?
I get 1270 sol/s using 670 watts at wall using 4x nanos
What are you guys getting?
That is quite good. I have 1900H with 1000W. With 920/380MHz for core and memory. That is 6x nano.
Is that 400mhz for the memory clock? What is the best undervolt setting?
I get 1270 sol/s using 670 watts at wall using 4x nanos
What are you guys getting?
I get 1270 sol/s using 670 watts at wall using 4x nanos
What are you guys getting?
I have my nano's running with a custom timing which also improves quite a bit.
Due to the work that i have already put into all of this, i'm not going to release this for free.
I will however release other things in the future
Greetings!
Due to the work that i have already put into all of this, i'm not going to release this for free.
I will however release other things in the future
Greetings!
How faster for ZEC mining?
It seems like 400MHz strap helps a bit, but it may be just placebo effect.
The speed at 400Mhz is faster than 440 Mhz when mining the ZEC.
Jump to: