Topic: [RADS] Radium - Decentralized Identities, Custom Assets, Elections, and More! - page 34. (Read 579184 times)

Seems things are going to change quite soon as per the quote " By the end of 2018, Radium will deliver a number of our core product offerings " .

Great job by our Radium team to keep everyone in the loop. I'm Excited about the rewards all this hard work is going to bring.

We are alive and kicking. Snowball is starting to move downhill. Keep up the great work and constant updates. I will tell more friends.

Radium is growing, evolving, advancing. We've updated our roadmap to show you where we are and where we're headed. Have a look here!

https://blog.radiumcore.org/radium-2-0-development-expansion-roadmap-updated-dec-2018-46e89b5419b4

$RADS $BTC #radium #bitcoin #blockchain #fintech #crypto #roadmap #identity #voting #elections #data #mobile #ipfs

I love when a project takes part actively in the giving of information updates to the community without having to be asked. This would be a good thing for the project, I will be here aware of any information provided.

Radium is growing, evolving, advancing. We've updated our roadmap to show you where we are and where we're headed. Have a look here!

https://blog.radiumcore.org/radium-2-0-development-expansion-roadmap-updated-dec-2018-46e89b5419b4

$RADS $BTC #radium #bitcoin #blockchain #fintech #crypto #roadmap #identity #voting #elections #data #mobile #ipfs

Radium is growing, evolving, advancing. We've updated our roadmap to show you where we are and where we're headed. Have a look here!

https://blog.radiumcore.org/radium-2-0-development-expansion-roadmap-updated-dec-2018-46e89b5419b4

$RADS $BTC #radium #bitcoin #blockchain #fintech #crypto #roadmap #identity #voting #elections #data #mobile #ipfs

If you have another operating system and not all dependencies, then the wallet file will not start.
I did not make a demon purse, but a graphical shell.
Do everything according to this instruction.

Instructions for launching a purse at the Raspberry Pi 3.

Configuring Raspberry Pi 3
What do we need:
- Raspberry itself with power cable;
- SD card and computer with card reader;
- USB keyboard and mouse;
- HDMI cable;
- monitor with HDMI input.

1. Download from here: http://downloads.raspberrypi.org/raspbian/images/raspbian-2017-07-05/2017-07-05-raspbian-jessie.zip.torrent
2. Insert the SD card into the card reader. To save the system to a card, use Win32 Disk Imager.
Download link - https://sourceforge.net/projects/win32diskimager/
3. Select the unpacked image, then the flash drive, then click "Write" and wait.

4. After completing the recording process, you can insert the card into Raspberry.
5. Connect the monitor, mouse, keyboard and power.

Login: pi
Password: raspberry

Remember them, you will have to enter often. You can change the password in Settings - Raspberry Pi Configuration.

Here it is better to disable Splash Screen splash screen.
6. Connect the Internet, wi-fi or wired. Here everything is simple, as in Windows.

7. After the appearance of the Internet, you can set the desired locale and time zone in Raspberry Pi Configuration.

8. Start the terminal

9. Updated:
sudo apt-get update
sudo apt-get dist-upgrade

10. We put the remote access:
sudo apt-get install tightvncserver
sudo apt-get install xrdp

11. Increase SWAP:
sudo nano /etc/dphys-swapfile
Change the value of CONF_SWAPSIZE = 100 to 1000. To save the file, press Ctrl + X followed by Y then Enter.

12. Connect SWAP:
sudo dphys-swapfile setup
sudo dphys-swapfile swapon

13. Now you can disconnect the mouse, keyboard, monitor and connect from a regular computer. Run in Windows Start - All Programs - Standard - "Remote Desktop Connection" or Start - Run - mstsc
Enter the IP address of Raspberry, click Connect and enter login and password (pi raspberry).

Now you can start installing the purse RadiumCoin.
1. Start the terminal.
2. Set the dependencies:

sudo apt-get install qt4-qmake libqt4-dev build-essential libboost-dev libboost-system-dev \
libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev \
libssl-dev libdb4.8 ++ - dev

3. And this:
1: sudo apt-get install autoconf libtool libssl-dev libboost-all-dev libminiupnpc-dev -y
2: mkdir ~/bin
cd ~/bin
3: wget http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz
tar -xzvf db-4.8.30.NC.tar.gz
cd db-4.8.30.NC/build_unix/
../dist/configure --enable-cxx
make -j4
sudo make install

4. And this:
sudo apt-get install libdb5.3++-dev libdb++-dev libdb5.3-dev libdb-dev && ldconfig

5. To enable port forwarding, install UPnP:
sudo apt-get install miniupnpc

could someone enlighten me on the uses of the Multi-sig transaction builder within the Zero Client UX:
And when it will be available for use.