Oh didn't see that.
Still curious about my november shipment order...
ORDER REFERENCE DATE TOTAL PRICE PAYMENT: STATUS INVOICE
NLTALAEYM 2013-11-23 1 985,10€ bitpay Payment accepted Invoice PDF details Reorder
Topic: Re: [ANN] Technobit HEX16A2 - 24 Ghs - 50 EUR 48 h shippment - page 49. (Read 104890 times)
December 17, 2013, 03:08:17 PM
December 17, 2013, 05:58:59 AM
Hi Marto,
the website still states that they can be chained and only one USB cable can be used. You might want to correct that.
Bye
Michael :-)
10x the website still states that they can be chained and only one USB cable can be used. You might want to correct that.
Bye
Michael :-)
December 17, 2013, 05:38:31 AM
Hi Marto,
the website still states that they can be chained and only one USB cable can be used. You might want to correct that.
Bye
Michael :-)
the website still states that they can be chained and only one USB cable can be used. You might want to correct that.
Bye
Michael :-)
December 17, 2013, 05:31:39 AM
How can I link the 4x HEX16A2 boards, is there a special cable I have to buy?
You have to use USB hub December 17, 2013, 05:00:14 AM
How can I link the 4x HEX16A2 boards, is there a special cable I have to buy?
December 16, 2013, 06:16:42 PM
Still no answer on the "end of november shipment" orders though....
I today recieved an email from technobit support. My order (#2 batch november) will be shipped till end of december.
Emailbot?
Ref MIWHIUTDK
December 16, 2013, 06:16:18 PM
order ref ?
I'll quote my own message again so you get my story (and see that I understand the december shipments)Order JTVEEGAXQ
Hi Marto,
I've read all your posts and the newsletter about shipments, but I have a question and I hope you can answer
OSPRSHZDH 2013-11-28 1 426,50€ PayPal Payment accepted
LKUPFIGKK 2013-11-20 1 029,30€ PayPal Payment accepted
JTVEEGAXQ 2013-11-15 357,30€ PayPal Payment accepted
The one from 15-11 is a hex16a2 (batch 2 end of nov shipment!) and a USB miner (2nd week dec shipment)
The one from 20-11 is more hex16a2 (1/2 week dec shipment) and more USB miners (2nd week dec shipment)
The one from 28-11 is even more hex16a2 (december shipment)
So I won't complain about the 2nd and 3rd order as you've clearly said they'll be shipped before Christmas.
However, the 1st order contains a hex16a2 from the 2nd batch which should've been shipped long ago now...
Only thing I can think of is that because of that single USB miner in that order, it's not shipped yet.
If this is the case, could you please just send the board and move the USB miner to the 2nd order? (with the other miners)
I've paid shipping costs for each order so it shouldn't matter.
I hope you have time to reply to this so I know what I'm up to.
Thanks
I've read all your posts and the newsletter about shipments, but I have a question and I hope you can answer
OSPRSHZDH 2013-11-28 1 426,50€ PayPal Payment accepted
LKUPFIGKK 2013-11-20 1 029,30€ PayPal Payment accepted
JTVEEGAXQ 2013-11-15 357,30€ PayPal Payment accepted
The one from 15-11 is a hex16a2 (batch 2 end of nov shipment!) and a USB miner (2nd week dec shipment)
The one from 20-11 is more hex16a2 (1/2 week dec shipment) and more USB miners (2nd week dec shipment)
The one from 28-11 is even more hex16a2 (december shipment)
So I won't complain about the 2nd and 3rd order as you've clearly said they'll be shipped before Christmas.
However, the 1st order contains a hex16a2 from the 2nd batch which should've been shipped long ago now...
Only thing I can think of is that because of that single USB miner in that order, it's not shipped yet.
If this is the case, could you please just send the board and move the USB miner to the 2nd order? (with the other miners)
I've paid shipping costs for each order so it shouldn't matter.
I hope you have time to reply to this so I know what I'm up to.
Thanks
December 16, 2013, 02:33:41 PM
Oh didn't see that.
Still curious about my november shipment order...
order ref ? Still curious about my november shipment order...
December 16, 2013, 05:24:02 AM
Oh didn't see that.
Still curious about my november shipment order...
Still curious about my november shipment order...
December 16, 2013, 05:22:32 AM
Hey Martin!
I have sent an email and multiple PMs here and haven't had a reply.
I have an order for 4 boards which were to be shipped 1/2 week of december and i still haven't received anything.
They were payed in full with shipping cost : reference FXJWEGLKS
Please let me know
I have sent an email and multiple PMs here and haven't had a reply.
I have an order for 4 boards which were to be shipped 1/2 week of december and i still haven't received anything.
They were payed in full with shipping cost : reference FXJWEGLKS
Please let me know
It's already said all december orders will be shipped before Christmas.
Still no answer on the "end of november shipment" orders though....
In one of his last update he changed the "until christmas" to "All December orders will be shipped until end of December"
So if he keeps his promis, all orders with december shipping , wil be shipped before the end of the year
December 16, 2013, 04:43:45 AM
reimburse the money I promised yesterday
and still not returned anything
connects and does not answer the pm
not answering emails
told him I would open a police investigation for fraud and you give equal
I told him I was a cop and you're stealing my money
and does not return
you and written more than 5 pm and connects and does not answer
I hope to resolve this and refund me the money amicably
without having to open a police investigation for fraud
answer the pm and returns the money and forget all this
answer thanks
and still not returned anything
connects and does not answer the pm
not answering emails
told him I would open a police investigation for fraud and you give equal
I told him I was a cop and you're stealing my money
and does not return
you and written more than 5 pm and connects and does not answer
I hope to resolve this and refund me the money amicably
without having to open a police investigation for fraud
answer the pm and returns the money and forget all this
answer thanks
He has taken BTC from many and not delivered (me too) so make an entry to his trust so others are protected.
December 16, 2013, 04:37:16 AM
Hey Martin!
I have sent an email and multiple PMs here and haven't had a reply.
I have an order for 4 boards which were to be shipped 1/2 week of december and i still haven't received anything.
They were payed in full with shipping cost : reference FXJWEGLKS
Please let me know
I have sent an email and multiple PMs here and haven't had a reply.
I have an order for 4 boards which were to be shipped 1/2 week of december and i still haven't received anything.
They were payed in full with shipping cost : reference FXJWEGLKS
Please let me know
It's already said all december orders will be shipped before Christmas.
Still no answer on the "end of november shipment" orders though....
December 16, 2013, 04:20:11 AM
Hey Martin!
I have sent an email and multiple PMs here and haven't had a reply.
I have an order for 4 boards which were to be shipped 1/2 week of december and i still haven't received anything.
They were payed in full with shipping cost : reference FXJWEGLKS
Please let me know
I have sent an email and multiple PMs here and haven't had a reply.
I have an order for 4 boards which were to be shipped 1/2 week of december and i still haven't received anything.
They were payed in full with shipping cost : reference FXJWEGLKS
Please let me know
December 16, 2013, 12:35:50 AM
For all my friends here, Merry Christmas & Happy New Year 2014.
December 15, 2013, 02:24:26 PM
All December orders will be shipped until end of December.
Dear Martin,
When will november orders be shipped? -jk
Please have a (2nd) look at MIWHIUTDK. You allready looked at the order and noticed it should have been shipped and promised shippment for "monday morning"- that monday morning passed nearly two weeks ago, status still "payment accepted".
Maybe you should drain some more resources for support and shippment of TECHNOMACHINEX?
Thank you
daniel
December 14, 2013, 03:50:51 PM
Use Wmware for separate linux, patch cgminer why as on tplink. And then all would great:)
ah y and pass usb to the vm, thanks for the tip!
December 14, 2013, 12:36:48 PM
Sorry too busy to answer each one of you
From today there is one member of the team dedicated to go trough customer support, hope it'll make things better.
In the product page it is written the shipment month.
@ the moment we are selling January shipment.
You can order 10 or 20.
We are not answering if you ask us for earlier delivery as far we have already late orders to finish.
All December orders will be shipped until end of December.
All orders are accepted only trough website.
We ship orders with transport cost paid.
If you ordered with packing only option you'll get an e-mail when your order is ready with address for pick up.
We ship first the orders that have paid transport.
Sending us more and more e-mails as kind for exact delivery date is only filling our inbox
Best Martin
From today there is one member of the team dedicated to go trough customer support, hope it'll make things better.
In the product page it is written the shipment month.
@ the moment we are selling January shipment.
You can order 10 or 20.
We are not answering if you ask us for earlier delivery as far we have already late orders to finish.
All December orders will be shipped until end of December.
All orders are accepted only trough website.
We ship orders with transport cost paid.
If you ordered with packing only option you'll get an e-mail when your order is ready with address for pick up.
We ship first the orders that have paid transport.
Sending us more and more e-mails as kind for exact delivery date is only filling our inbox
Best Martin
December 14, 2013, 06:35:11 AM
Use Wmware for separate linux, patch cgminer why as on tplink. And then all would great:)
The voltage of 1.0.0.3 can be changed if you start hexminer_old.exe, change the voltage there and then start hexminer 1.0.0.3
But a major issue seems to be stability of either the software or the miner. Me and a collegue of mine have the same problem:
The miner is now running at 1450Mh/chip @ 1.1V, but even at 1400/1V I can't seem to get it stable under windows. Every few hours the hexminer program crashes (Both 1.0.0.2 and 1.0.0.3 with the serial reset). I have to plug the device in another usb port and start hexminer again.
Is there a way to start hexminer from the command line? If I could kill and start it with a scheduled script I would get a lot more mining hours.
But a major issue seems to be stability of either the software or the miner. Me and a collegue of mine have the same problem:
The miner is now running at 1450Mh/chip @ 1.1V, but even at 1400/1V I can't seem to get it stable under windows. Every few hours the hexminer program crashes (Both 1.0.0.2 and 1.0.0.3 with the serial reset). I have to plug the device in another usb port and start hexminer again.
Is there a way to start hexminer from the command line? If I could kill and start it with a scheduled script I would get a lot more mining hours.
December 14, 2013, 06:30:58 AM
Those boards do include the chips? Ready to plug and play?
There is 2 product in technobit site. One is assembly service only & you need provide the chips(199,3 EUR). Other one is complete miner(299,3 EUR)
Many customer had confuse by this & choose assembly service but asking for complete miner.
And it's not ready stock, they need up to 4 week process after receive payment
December 14, 2013, 04:32:29 AM
The voltage of 1.0.0.3 can be changed if you start hexminer_old.exe, change the voltage there and then start hexminer 1.0.0.3
But a major issue seems to be stability of either the software or the miner. Me and a collegue of mine have the same problem:
The miner is now running at 1450Mh/chip @ 1.1V, but even at 1400/1V I can't seem to get it stable under windows. Every few hours the hexminer program crashes (Both 1.0.0.2 and 1.0.0.3 with the serial reset). I have to plug the device in another usb port and start hexminer again.
Is there a way to start hexminer from the command line? If I could kill and start it with a scheduled script I would get a lot more mining hours.
But a major issue seems to be stability of either the software or the miner. Me and a collegue of mine have the same problem:
The miner is now running at 1450Mh/chip @ 1.1V, but even at 1400/1V I can't seem to get it stable under windows. Every few hours the hexminer program crashes (Both 1.0.0.2 and 1.0.0.3 with the serial reset). I have to plug the device in another usb port and start hexminer again.
Is there a way to start hexminer from the command line? If I could kill and start it with a scheduled script I would get a lot more mining hours.
Jump to: