Pages:
Author

Topic: [Review] Avalon 6 Miner - Winter Mining - Notlist3d - Also FAQ and Help - page 37. (Read 79378 times)

legendary
Activity: 1456
Merit: 1000
Bad news team - I've been in contact with BlocC who said that smart fan speed is integral to it's operation and I doubt we'll have control over it :/

I hope that you are wrong and that true under volt + down clock  is available.

It was available on the avalon 4.

But if you are correct  then these will never work as well as I hoped for.  I am glad to have the 2.  And I will now consider more options.  I may get a hosted s-7.

I'm hoping the same his time is odd at releasing info.  Getting info at Saturday night is just normally not the time they would be sending out support info.

Who are you talking to at BlockC bonez?  Can you post email or picture of email?  The fact you spelled BlockC wrong and time you posted just does not give me ton of confidence in your info.
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
Bad news team - I've been in contact with BlocC who said that smart fan speed is integral to it's operation and I doubt we'll have control over it :/

I hope that you are wrong and that true under volt + down clock  is available.

It was available on the avalon 4.

But if you are correct  then these will never work as well as I hoped for.  I am glad to have the 2.  And I will now consider more options.  I may get a hosted s-7.
legendary
Activity: 1456
Merit: 1000
cool it takes a village but it now works.

@ notlist  you should add something in the thread title

 some FAQ's on av-6

or

some support av-6

thread will get more hits like my old  sp20 thread.


https://bitcointalksearch.org/topic/unofficial-spondoolies-sp20-thread-872014

Good idea I changed it a little bit.   I'm happy to have any and all talk about AV6 in it.  It is meant to help people is main goal.

So thanks for idea!
member
Activity: 70
Merit: 10
Bad news team - I've been in contact with BlocC who said that smart fan speed is integral to it's operation and I doubt we'll have control over it :/
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
cool it takes a village but it now works.

@ notlist  you should add something in the thread title

 some FAQ's on av-6

or

some support av-6

thread will get more hits like my old  sp20 thread.


https://bitcointalksearch.org/topic/unofficial-spondoolies-sp20-thread-872014
member
Activity: 91
Merit: 10
great! glad i could help out.

sorry to Notlist3d for all this in your thread. We should have taken it to pm. Might help someone else though.
newbie
Activity: 14
Merit: 0
there is a jumper plug in a clear bag. that goes on the other end and connects the green wire to ground, which tells the psu to turn on.
yes! thanks so much for your help! the miner did it's initial checks and it's running fine now!
member
Activity: 91
Merit: 10
there is a jumper plug in a clear bag. that goes on the other end and connects the green wire to ground, which tells the psu to turn on.
newbie
Activity: 14
Merit: 0
the black 24 pin jumper plug that tells the psu to turn on. should be in the box with the cables.
.

ok i connected the 24 pin to the section for the mobo and the other end is not connected. nothing happens on turn on
member
Activity: 91
Merit: 10
the black 24 pin jumper plug that tells the psu to turn on. should be in the box with the cables.
newbie
Activity: 14
Merit: 0
do you have the jumper plugged in?

the cable connected to the miner?
member
Activity: 91
Merit: 10
do you have the jumper plugged in?
newbie
Activity: 14
Merit: 0
what psu? if you have voltmeter check the pcie connectors and see what the voltage is. Does the psu even turn on?

EVGA 1300. I plugged it into the wall and switched to power on, but no fans spinning or anything.
member
Activity: 91
Merit: 10
what psu? if you have voltmeter check the pcie connectors and see what the voltage is. Does the psu even turn on?
newbie
Activity: 14
Merit: 0
it will run no matter what. it just wont hash without cgminer.

yeah nothing happens. i'm suspecting either the miner or psu is defective
member
Activity: 91
Merit: 10
it will run no matter what. it just wont hash without cgminer.
newbie
Activity: 14
Merit: 0
whats the miner do when you turn on the psu? It should go through an initialization where the fan runs and the lights on the back flash and change colors.

it actually doesn't do anything. I thought it would run as soon as the cgminer runs. I'll try re-plugging the psu.
member
Activity: 91
Merit: 10
whats the miner do when you turn on the psu? It should go through an initialization where the fan runs and the lights on the back flash and change colors.
newbie
Activity: 14
Merit: 0
does the miner turn on at all?

I don't know. It should have been tested before they sold it to me.
I switched from static ip to DHCP and now it shows this:

Code:
[Firmware Version] => Avalon Firmware - 20151111
   luci: b101100
   cgminer: b9d9dd2
   cgminer-packages: d33729e

Reply was 'STATUS=S,When=1448749543,Code=70,Msg=CGMiner stats,Description=cgminer 4.9.0|STATS=0,ID=AV40,Elapsed=330,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,MM Count=0,Automatic Voltage=false,Smart Speed=true,Nonce check=true,AUC VER=AUC-20141122,AUC I2C Speed=400000,AUC I2C XDelay=19200,AUC ADC=16032,USB Pipe=0,USB Delay=r0 0.000000 w0 0.000000,USB tmo=0 0|STATS=1,ID=POOL0,Elapsed=330,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=127.99804688,Min Diff=127.99804688,Max Diff=127.99804688,Min Diff Count=184,Max Diff Count=184,Times Sent=3,Bytes Sent=192,Times Recv=12,Bytes Recv=9582,Net Bytes Sent=192,Net Bytes Recv=9582|'
[STATUS] =>
(
   [STATUS] => S
   [When] => 1448749543
   [Code] => 70
   [Msg] => CGMiner stats
   [Description] => cgminer 4.9.0
)
[STATS0] =>
(
   [STATS] => 0
   [ID] => AV40
   [Elapsed] => 330
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [MM Count] => 0
   [Automatic Voltage] => false
   [Smart Speed] => true
   [Nonce check] => true
   [AUC VER] => AUC-20141122
   [AUC I2C Speed] => 400000
   [AUC I2C XDelay] => 19200
   [AUC ADC] => 16032
   [USB Pipe] => 0
   [USB Delay] => r0 0.000000 w0 0.000000
   [USB tmo] => 0 0
)
[STATS1] =>
(
   [STATS] => 1
   [ID] => POOL0
   [Elapsed] => 330
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [Pool Calls] => 0
   [Pool Attempts] => 0
   [Pool Wait] => 0.000000
   [Pool Max] => 0.000000
   [Pool Min] => 99999999.000000
   [Pool Av] => 0.000000
   [Work Had Roll Time] => false
   [Work Can Roll] => false
   [Work Had Expire] => false
   [Work Roll Time] => 0
   [Work Diff] => 127.99804688
   [Min Diff] => 127.99804688
   [Max Diff] => 127.99804688
   [Min Diff Count] => 184
   [Max Diff Count] => 184
   [Times Sent] => 3
   [Bytes Sent] => 192
   [Times Recv] => 12
   [Bytes Recv] => 9582
   [Net Bytes Sent] => 192
   [Net Bytes Recv] => 9582
)
[/code]
member
Activity: 91
Merit: 10
does the miner turn on at all?
Pages:
Jump to: