Topic: Review of Panda Miner coming up. - page 12. (Read 30761 times)

Mining equipment is quite another
it does not pass certification ..

  Well, my point is poor QA assurance from panda miner or any company from american, chinese or timbucktu are usually are from new start up. Just hope if the rom/firmware can fix the language issue.. if it dont a change of the main board or return for a newer version of miner.  sounds like inventory control shipped a few "prototypes" by accident.. i heard that excuse before..   

and for your information im a registered independent and Obama is a good president   

Mining equipment is quite another
it does not pass certification ..

felix73

 i quoted "from my experiences from using other Chinese hardware" I was referring to routers and point of sales devices i installed and serviced that are from china "lenovo" and others. Software  in varies countries are not affected but a year ago , alot of pre install software like windows, linux, ect ect had language issues here in California..  especially the routers .. I dont think your mining industry is any different 

do not know how in English ...
but in Russian it 's called - stupid and not wise
philipma1957 haves not prototype model miner this series
you just do not realize that only 4-5 % of ALL miners gets into the whole world.
everything is done for CHINA
any miners equipment
and I was especially funny when they saw that the window 10 is not a license
Only in the United States think about it

PS/ say hello to Obama Trump cure you

maybe philipma1957 haves a prototype model of his miner.. from my experiences from using other Chinese hardware, software varies from one week to another. sometimes its best if your planing to buy a few is to buy all at once so software differences are minimal 

hey do not owe anything to anyone
  all products are China
Only by chance it is in Rosiii incredible price of my efforts and remember that the cost to beg on the demo test in the United States


there is even a child who realizes in the computer will be able to download any language that is needed

you are doing something wrong !!!
Where did the French, if you put the English?
I made 10 pieces pandamayner of Chinese in English and Russian.
Remain in Chinese only file names.

I followed that and did get an English pack to install.

However there is a lot of Chinese mixed in plus a tiny bit of French.

I think I hit a wrong setting to get that French.

I am still waiting for a part to make a full clone of the msata ssd.

Once I have a full clone. I will Report back on if I can upgrade from enterprise LTSB to just


window 10 enterprise. I have a source for a real key for that build.

I just did a build from win 10 pro to win 10 enterprise. And I activated with a enterprise key.

That was on a z270 that I am reviewing for newegg.

So I may be able to fully activate the panda miner to windows 10 enterprise legit and legal

 installed ANY language with no problem to Pandaminer

https://www.youtube.com/watch?v=kKUQMje4--Q

perhaps there is a one string CLI verbose mode that does this changes automatically rather than trying to navigate the GUI and do trial and error

Here is some command that should help.

open a command prompt, and use.


or with regedit


You can also use the regedit mode to change the settings.


you can change the pagefile location, also the numbers are "starting virtual memory" & "max virtual memory"

hope it helps

Guys - I missed major part on difficulties with Win 10 Ent and language packs.

But reading Russian forum I did not notice that.

They installed Russia language with no problem

Phil -- did you see if the windows build had been pre-setup with 16GB windows virtual memory -- to support Claymore miners?

I tried to navigate control panel but get stuck halfway due to language pack - its really 50-50% guess game for me. I think I have done the ENG pack but its still mostly Mandarin to me.

yes I think  .975 volts  vs 1.050  stock

Yup, you are right. Eliovp did report that the GPUs were already modded before he further did some mod improvements.

These are not a stock settings - the cards in Panda Miner are already with modded roms

Tried Niceheash Windows Miner v 1.7.3.11 -- running normally - will run overnight to see if it can hold.

During installation, required .NET 3.5 installation as prerequisite.

GPU benchmark listed only Dagger-Hashimoto and Equihash coins.

Strange - running this NH miner on normal rig lists more than this 2 algorithms.

However, if you choose to also include CPU mining, it will list more algos like LYRA2RE, HODL and Cryptonite.

This version supports 3rd party miners like latest versions of Claymore ETH and ZEC miners.

At stock settings, benchmarking shows 27.596 MH/s for ETH and 209 H/s for each card.

Not bad for stock settings.

This NH Windows Miner is probably the most easiest to set up and ideal for mining newbies.

I bricked all 8 cards when an amd upgrade popped up.  I lost all my drivers  for all eight cards.

I booted with the restart option and everything was restored.

I am not a software guy but the os on the panda is sophisticated in recovery mode.  a good thing.

I still want the linux and I think I would keep my panda miner master sitting off in a little box just incase the linux master had an issue.

right now the zec miner works best really stable and I was able to upgrade from 9.1 included to 9.3 claymore.

the eth crashes every 3 to 5 hours.

I can not fully view the cards  or the card temps but I do know the watts jump from 1050 to 1150.

So I have to think the gear from the factory while good gear is only okay software. 

It would be nice if panda miner simply paid for the linux and put it in all miners.

At the moment  my miner is happy doing zec.  and my miner was provided up front to me. I did not pay but agreed to pay for the miner when I fully tested it.  So it passes on zec and fails on eth .. I will test xmr and other shit the next few days.

I really urge panda miner to allow the linux developer to put the miner out there for buyer and to allow say ½ of the 2180 I owe  panda miner to go to the linux developer .  This is a win for everyone.

panda miner gets a good software.
little guys get a good flexible miner
the linux + driver + rom builder gets some coin in his pocket.

Once again I could use a good translator to help here.

Please look at the pictures

 two  24 gpu racks with six four card mobos using 6 atx machine 6 ethernet cables

total of 48 gpu's 12 mobos 12 cpus  12 sticks of ram 12 ethernet cables

replaced by

six panda miners with 3 psus ( ibm 2880 )    3 cpus 3 sticks of ram 6 ethernet cables

after restarting sgminer-gm.... the GPU shows up again (not DEAD).

I can only conclude that there is something not right with status reporting of GPUs - the GPU roms were already modded according to Eliovp.

Likely that ... maybe... temps was high and fans reported wrong readings resulting inconclusive results and sgminer-gm could not get stats from that particular GPU thus resulting dead status..... anyways I will surely keep an eye on the this GPU.

Also, I examined the contents of the mSata and found a copy on Polaris BIOS editor too... hmmm.... why leave it there if not used for something.

Ouch,  Looks like maybe the first case where someone has to find out if the warranty is good or not.  Dead GPU already... That sucks!  What is the process with PM to get support?