Road to RX 570/580 7 GPU MINING RIG - page 14.

Gigasnike95

newbie

Activity: 36

Merit: 0

Quote from: pulec777 on April 29, 2017, 07:44:16 AM

Quote from: Gigasnike95 on April 29, 2017, 06:13:59 AM

Quote from: pulec777 on April 29, 2017, 05:33:45 AM

Quote from: Gigasnike95 on April 29, 2017, 04:38:13 AM

Quote from: fathal on April 29, 2017, 04:01:02 AM

Yes. My team is working with You!

We will give a try this evening, so be atempt to read this post later, maybe we have fixed the problem

Let me know. I also solve the problem. My solution is 5x 570 + 2x 1060 gtx for now.

5x29MHs + 2x 23.5 MHs per rig, works fine.

How did you get it? When we install 5x 570 it works fine, but if we reboot, sometimes it works, sometimes windows reports error 43, it isn't stable.

In ethOS or simpleminingOS, we need to activate 4g decoding to use more than 4 GPUs but it fails and it doesn't boot

Yes after the first or second restart again 43. I will restore the patch and immediately new patch application. Then everything works fine. Now I've done 3 restarts behind and it's still working.

I tried and you were right

pulec777

newbie

Activity: 27

Merit: 0

Quote from: Gigasnike95 on April 29, 2017, 06:13:59 AM

Quote from: pulec777 on April 29, 2017, 05:33:45 AM

Quote from: Gigasnike95 on April 29, 2017, 04:38:13 AM

Quote from: fathal on April 29, 2017, 04:01:02 AM

Yes. My team is working with You!

We will give a try this evening, so be atempt to read this post later, maybe we have fixed the problem

Let me know. I also solve the problem. My solution is 5x 570 + 2x 1060 gtx for now.

5x29MHs + 2x 23.5 MHs per rig, works fine.

How did you get it? When we install 5x 570 it works fine, but if we reboot, sometimes it works, sometimes windows reports error 43, it isn't stable.

In ethOS or simpleminingOS, we need to activate 4g decoding to use more than 4 GPUs but it fails and it doesn't boot

Yes after the first or second restart again 43. I will restore the patch and immediately new patch application. Then everything works fine. Now I've done 3 restarts behind and it's still working.

Gigasnike95

newbie

Activity: 36

Merit: 0

Quote from: LegendaryMembership on April 29, 2017, 03:50:27 AM

Quote from: fathal on April 29, 2017, 03:31:04 AM

The same issue on Gygabyte Z170 Gaming K3 and 6 cards Aorus RX570 4gb.
Windows 10 is working good with only 5 and with 6th is reseting.

All checked
- other risers - not work
- other power suply - not work
- other (same) mMotherboard - not work
- other 6 cards - not work.

Did any of You overcome the problem?

i think you must check your pcie setting, set the pcie to x1 x2 x3 or auto (find the best) then you can disable wlan too at bios, disable onboard vga

the only thing we can do is to disable wlan, we cant do the other settings in this mboard

Gigasnike95

newbie

Activity: 36

Merit: 0

Quote from: pulec777 on April 29, 2017, 05:33:45 AM

Quote from: Gigasnike95 on April 29, 2017, 04:38:13 AM

Quote from: fathal on April 29, 2017, 04:01:02 AM

Yes. My team is working with You!

We will give a try this evening, so be atempt to read this post later, maybe we have fixed the problem

Let me know. I also solve the problem. My solution is 5x 570 + 2x 1060 gtx for now.

5x29MHs + 2x 23.5 MHs per rig, works fine.

How did you get it? When we install 5x 570 it works fine, but if we reboot, sometimes it works, sometimes windows reports error 43, it isn't stable.

In ethOS or simpleminingOS, we need to activate 4g decoding to use more than 4 GPUs but it fails and it doesn't boot

fathal

newbie

Activity: 49

Merit: 0

Quote from: pulec777 on April 29, 2017, 05:33:45 AM

Quote from: Gigasnike95 on April 29, 2017, 04:38:13 AM

Quote from: fathal on April 29, 2017, 04:01:02 AM

Yes. My team is working with You!

We will give a try this evening, so be atempt to read this post later, maybe we have fixed the problem

Let me know. I also solve the problem. My solution is 5x 570 + 2x 1060 gtx for now.

5x29MHs + 2x 23.5 MHs per rig, works fine.

Great Amigo! Lets Fight wit it and Win!

pulec777

newbie

Activity: 27

Merit: 0

Quote from: Gigasnike95 on April 29, 2017, 04:38:13 AM

Quote from: fathal on April 29, 2017, 04:01:02 AM

Yes. My team is working with You!

We will give a try this evening, so be atempt to read this post later, maybe we have fixed the problem

Let me know. I also solve the problem. My solution is 5x 570 + 2x 1060 gtx for now.

5x29MHs + 2x 23.5 MHs per rig, works fine.

Gigasnike95

newbie

Activity: 36

Merit: 0

Quote from: fathal on April 29, 2017, 04:01:02 AM

Yes. My team is working with You!

We will give a try this evening, so be atempt to read this post later, maybe we have fixed the problem

fathal

newbie

Activity: 49

Merit: 0

Yes. My team is working with You!

Gigasnike95

newbie

Activity: 36

Merit: 0

Quote from: fathal on April 29, 2017, 03:31:04 AM

The same issue on Gygabyte Z170 Gaming K3 and 6 cards Aorus RX570 4gb.
Windows 10 is working good with only 5 and with 6th is reseting.

All checked
- other risers - not work
- other power suply - not work
- other (same) mMotherboard - not work
- other 6 cards - not work.

Did any of You overcome the problem?

I think that at this moment nobody did it, but pay attention to this threat, we all can fin together the solution

LegendaryMembership

member

Activity: 109

Merit: 10

Quote from: fathal on April 29, 2017, 03:31:04 AM

The same issue on Gygabyte Z170 Gaming K3 and 6 cards Aorus RX570 4gb.
Windows 10 is working good with only 5 and with 6th is reseting.

All checked
- other risers - not work
- other power suply - not work
- other (same) mMotherboard - not work
- other 6 cards - not work.

Did any of You overcome the problem?

i think you must check your pcie setting, set the pcie to x1 x2 x3 or auto (find the best) then you can disable wlan too at bios, disable onboard vga

LegendaryMembership

member

Activity: 109

Merit: 10

i have try it with msi gaming motherboard with 7gpu rx 470, but its very hard to get 7vga running all, now im using only 6vga.
i think better we mining with simple setting, so we not wasting our time to build mining farm

Gigasnike95

newbie

Activity: 36

Merit: 0

Quote from: Pennywis3 on April 29, 2017, 02:08:26 AM

Good thing you opened a thread about this problem so we can solve it.

Already had 2 frames ready for 12x570, i now made one more so i can run 4 cards per frame heh.

I will try to help in resolving this issue, we realy don't want 4gpu rigs when we can have 6 or more Grin

Did you try flashing them to 470 bioses?

No, i'm trying it this evening and i'll write how does it work, but guys, you better think un other way to solve the issue becouse maybe it doesnt work, whatever you think that mayor work, tell me

fathal

newbie

Activity: 49

Merit: 0

The same issue on Gygabyte Z170 Gaming K3 and 6 cards Aorus RX570 4gb.
Windows 10 is working good with only 5 and with 6th is reseting.

All checked
- other risers - not work
- other power suply - not work
- other (same) mMotherboard - not work
- other 6 cards - not work.

Did any of You overcome the problem?

Pennywis3

full member

Activity: 327

Merit: 100

Good thing you opened a thread about this problem so we can solve it.

Already had 2 frames ready for 12x570, i now made one more so i can run 4 cards per frame heh.

I will try to help in resolving this issue, we realy don't want 4gpu rigs when we can have 6 or more Grin

Did you try flashing them to 470 bioses?

GPUM1ner

newbie

Activity: 39

Merit: 0

I heard flashing the 570 cards to 470 (Force flash option in atiflash)

PetrMiner

newbie

Activity: 7

Merit: 0

Hello,

I have 5 XFX RX 580 GPU on same configuration working normal, after plux sixth card windows dont boot.

4G decoding on
GEN1 set up

I install 5 cards fist
plug sixth
windows boot normaly
after driver automatic installation blue screen : Driver try to rewrite memory of system (something like that)
after that i cant boot too.

creepas

member

Activity: 67

Merit: 10

I personaly think that the only way now is to flash RX 570 to RX 470 i see no other way. I hope we can try it tomorow.

cReepas

Gigasnike95

newbie

Activity: 36

Merit: 0

In this thread i want to explain how i build a 7x RX 570 mining rig step by step, but as you may know, there's an issue with the driver, and in the moment i plug a 5th GPU, windows doesnt work in the way it should, the same in simpleminingOS and ethOS. I must say that 4 GPU are working good, here you have some pics of my rig and a list:

.PSU: EVGA G2 1600W
.VGA: SASPHIRE RX 570 PULSE 4GB
.VGA DRIVER: 17.4.3
.MOBO: MSI Z170A PRO CARBON
.MOBO BIOS VERSION: 1.81 Creepas MOD
.CPU: INTEL PENTIUM G4400 SKYLAKE
.HDD: SAMSUNG 120 GB SSD
.RAM: 4GB CORSAIR

. Driver 17.4.3 not working
. Driver 17.4.4(Beta) not working
. Ethos with more than 4 GPUs not working
.Simple mining os with more than 4 GPUs not working

My bios settings:

.4G decoding on
. PEG0 and PEG1 GEN 1 and GEN2 not working

I just want you guys to help me to fix the issue with 570/580 and i will write a guide step by step, tomorrow i will try to flash a modified BIOS that will try windows to recognize 570 as a 470, then i will be able to use 7 570 with the 470 driver

thanks @creepas for your support, this is his post:
https://bitcointalksearch.org/topic/m.18124988

UPDATE 1:

Quote from: pulec777 on April 29, 2017, 07:44:16 AM

Quote from: Gigasnike95 on April 29, 2017, 06:13:59 AM

Quote from: pulec777 on April 29, 2017, 05:33:45 AM

Quote from: Gigasnike95 on April 29, 2017, 04:38:13 AM

Quote from: fathal on April 29, 2017, 04:01:02 AM

Yes. My team is working with You!

We will give a try this evening, so be atempt to read this post later, maybe we have fixed the problem

Let me know. I also solve the problem. My solution is 5x 570 + 2x 1060 gtx for now.

5x29MHs + 2x 23.5 MHs per rig, works fine.

How did you get it? When we install 5x 570 it works fine, but if we reboot, sometimes it works, sometimes windows reports error 43, it isn't stable.

In ethOS or simpleminingOS, we need to activate 4g decoding to use more than 4 GPUs but it fails and it doesn't boot

Yes after the first or second restart again 43. I will restore the patch and immediately new patch application. Then everything works fine. Now I've done 3 restarts behind and it's still working.

this works guys! we have 5 working GPUs

Topic: Road to RX 570/580 7 GPU MINING RIG - page 14. (Read 83760 times)