RX 560 4GB Ethereum - page 17. | Bitcointalksearch.org

Biglife66

newbie

Activity: 10

Merit: 0

This might be out of topic, but had to ask how about RX 480? Please elaborate if it would be better if I can use RX 480??

I am very new

grafviktor

newbie

Activity: 3

Merit: 0

Quote from: infPICO on November 28, 2017, 06:25:41 PM

Yes, just copy value. And rise max memory clock to be able to go above 2000.
Well maybe you should start using Claymore, because i am getting 408 hs in claymore and 345 hs in xmr-stk-amd with same settings. Otherwise you can tune clocks in lot of softwares like msi afterburner, atitool etc...it is much easier to control your clocks from OS, because you need to tune card and adjust by small steps to find what you card can handle. You dont want to flash every card for each 10mhz change.

I find memory clock 2040 (not much for micron tbh) as stable with hashrate of 408 hs XMR and 12.1 mhs ETH...

Thanks for your help infPICO! The problem is my miners are built on linux and these flags -mvddc and -cvddc are unavailable for linux platform.

By the way, if I set memory clock on my card above 2000 my machine just dying with black screen right after miner starting to work. It seems that I have different memory revision if I just copy timing value from 1425 to 1500 my hashrate becomes slower. Maximum I was able to get from this card is 400h\s in Windows, using Claymore with your flags and the timing from my previous post. Thanks!

infPICO

newbie

Activity: 32

Merit: 0

Quote from: grafviktor on November 28, 2017, 03:44:36 PM

Quote from: infPICO on November 28, 2017, 02:54:10 PM

Anyway ETH is 12,1 MHS and XMR is 405 h/s.
using straps from 1425 and claymore:

-mclock 2060
-mvddc 1000

-cclock 1080
-cvddc 925

I apologize for the noob question, but I just want to clarify for myself - Have you just copied the timing value from 1425 to 1500? Also, is that possible to put the clock settings right into firmware ? The thing is I don't use claymore... Thank you.

Yes, just copy value. And rise max memory clock to be able to go above 2000.
Well maybe you should start using Claymore, because i am getting 408 hs in claymore and 345 hs in xmr-stk-amd with same settings. Otherwise you can tune clocks in lot of softwares like msi afterburner, atitool etc...it is much easier to control your clocks from OS, because you need to tune card and adjust by small steps to find what you card can handle. You dont want to flash every card for each 10mhz change.

I find memory clock 2040 (not much for micron tbh) as stable with hashrate of 408 hs XMR and 12.1 mhs ETH...

To sumarize this card I think cooling is nice, temps are low and fan is not noicy. They do quite nice hashrate in CryptoNight (they do more then 50% of usual RX580 output for less then 50% price and at very low power consump.), but below avarage (for micron) in Ethash.

grafviktor

newbie

Activity: 3

Merit: 0

Quote from: infPICO on November 28, 2017, 02:54:10 PM

Anyway ETH is 12,1 MHS and XMR is 405 h/s.
using straps from 1425 and claymore:

-mclock 2060
-mvddc 1000

-cclock 1080
-cvddc 925

I apologize for the noob question, but I just want to clarify for myself - Have you just copied the timing value from 1425 to 1500? Also, is that possible to put the clock settings right into firmware ? The thing is I don't use claymore... Thank you.

spring07

member

Activity: 140

Merit: 10

0x5A165891De2a2c8B82c7De19486277e0d5b644DF

Hmmmmn. Interesting and enlightening stuffs here.

infPICO

newbie

Activity: 32

Merit: 0

Quote from: [DeCo] on November 22, 2017, 04:52:46 PM

Ok i check the memmory it's the micron D9TRZ --> MT51J256M32HF-60S:A so yeah it's a 1500 Mhz chips on this card.

I'm still happy with it it goes up to 1800 with changed timings.

So beware of Saphire 560 pulse 11267-18-20G, Do not buy it!!! Wink

Just bought this card today lol !!! First i was happy about micron memory, then i realized max strap 1500, 14 compute units and shaders from rx460!!! What a tricky mess. This is realy some hybrid.

Anyway ETH is 12,1 MHS and XMR is 405 h/s.
using straps from 1425 and claymore:

-mclock 2060
-mvddc 1000

-cclock 1080
-cvddc 925

will test it further. But for monero it is quite high output.

btw: i dont get why this card needs 6pin connector?

grafviktor

newbie

Activity: 3

Merit: 0

Quote from: [DeCo] on November 22, 2017, 04:52:46 PM

Ok i check the memmory it's the micron D9TRZ --> MT51J256M32HF-60S:A so yeah it's a 1500 Mhz chips on this card.

I'm still happy with it it goes up to 1800 with changed timings.

So beware of Saphire 560 pulse 11267-18-20G, Do not buy it!!! Wink

Quote from: [DeCo] on November 22, 2017, 06:47:14 AM

Actually i put stock saphire pulse 560 bios which i found on internet and so far works ok.

1300 clocks ,1750 mem all shaders.

Works without errors even if i push it up to 1800.

Hi everyone!
Unfortunately I read this topic too late and managed to get 2 such cards. I used this value - 777000000000000022AA1C0073626C41B0551016BA0D260B0060060004061420EA8940AA0300000 01914292EB22E3B16 for 1500 timing, but it gave me just +15h\s on monero(it was 290, it is now 305) which is awful, in my humble opinion. Could you please point me to exact BIOS version you used to overlock this card ? In stock BIOS the highest timing is 1500. Thank you in advance!

[DeCo]

newbie

Activity: 5

Merit: 0

Ok i check the memmory it's the micron D9TRZ --> MT51J256M32HF-60S:A so yeah it's a 1500 Mhz chips on this card.

I'm still happy with it it goes up to 1800 with changed timings.

So beware of Saphire 560 pulse 11267-18-20G, Do not buy it!!! Wink

[DeCo]

newbie

Activity: 5

Merit: 0

Quote from: gregfromo on November 22, 2017, 04:32:39 AM

for testing use original bios and you could copy the lower straps to 1500 and see how it performs, lock gpuspeed max at 1100 @ 0,9v and check for memory erros and hashrate

Actually i put stock saphire pulse 560 bios which i found on internet and so far works ok.

1300 clocks ,1750 mem all shaders.

Works without errors even if i push it up to 1800.

Still haven't got tools to put heatsink down to check memory chips. So i'm little bit afraid to put 1500 timing to 1625 and up.

12 Mh, before was 9 -10. so atm i'm happy. But if chips are 1750 will mode it more Wink

gregfromo

member

Activity: 134

Merit: 10

Quote from: R0land on November 22, 2017, 06:05:46 AM

Quote from: Branko on November 22, 2017, 05:49:52 AM

Very misleading, they also sell RX580 nitro+ special edition, lite retail, but its actually BETTER than normal card,
having 2100MHz memory insetad 2000MHz

https://www.protis.hr/products/details/graficka-kartica-amd-sapphire-radeon-rx-580-nitro-se-lite-8gb-gddr5/121490

It looks like a very good card, but why they call it lite? Be carefull ! Roll Eyes

"lite retails" is without games and adapters/cables, only cd and handbuch

R0land

jr. member

Activity: 208

Merit: 3

Quote from: Branko on November 22, 2017, 05:49:52 AM

Very misleading, they also sell RX580 nitro+ special edition, lite retail, but its actually BETTER than normal card,
having 2100MHz memory insetad 2000MHz

https://www.protis.hr/products/details/graficka-kartica-amd-sapphire-radeon-rx-580-nitro-se-lite-8gb-gddr5/121490

It looks like a very good card, but why they call it lite? Be carefull ! Roll Eyes

Branko

sr. member

Activity: 2562

Merit: 321

Quote from: R0land on November 22, 2017, 04:38:49 AM

Quote from: Branko on November 22, 2017, 03:49:24 AM

Interesting card indeed, looks like some mix between 560, 560D and 460

It´s an official Card, you can buy it here:
https://www.mindfactory.de/product_info.php/4GB-Sapphire-Radeon-RX-560-Pulse-4GD5-Aktiv-PCIe-3-0-x16--Lite-Retail-_1211387.html

It´s a Baffin XL Chip, also used in RX 560D ... they call it RX 560 Lite Retail now.

Very misleading, they also sell RX580 nitro+ special edition, lite retail, but its actually BETTER than normal card,
having 2100MHz memory instead 2000MHz

https://www.protis.hr/products/details/graficka-kartica-amd-sapphire-radeon-rx-580-nitro-se-lite-8gb-gddr5/121490

R0land

jr. member

Activity: 208

Merit: 3

Quote from: Branko on November 22, 2017, 03:49:24 AM

Interesting card indeed, looks like some mix between 560, 560D and 460

It´s an official Card, you can buy it here:
https://www.mindfactory.de/product_info.php/4GB-Sapphire-Radeon-RX-560-Pulse-4GD5-Aktiv-PCIe-3-0-x16--Lite-Retail-_1211387.html

It´s a Baffin XL Chip, also used in RX 560D ... they call it RX 560 Lite Retail now.

gregfromo

member

Activity: 134

Merit: 10

Quote from: [DeCo] on November 21, 2017, 02:31:31 PM

Quote from: ?? on ??

Hi guys, I have 4 Sapphire rx 560 cards and but also a problem with one of them: when the Claymore SW starts it indicates that 1 of them has only
14 compute units
whereas the other 3 have
16 compute units

I was wondering if this is a configuration problem or a problem related to the card hardware...

Any help?

Thank you in advance

I want to turn back to this, i'm shocked!

Just want to warn you guys about this saphire card 11267-18-20G

It's very funny it's rx 560 release date is aug 2016, has less shaders , les tmu, and 1500 Mhz memory actually it's worse than 460

Now what do you think, should i just flash it over with normal saphire 560, i'm woried about ram speed too much since it's only 1500 now....

thanks

for testing use original bios and you could copy the lower straps to 1500 and see how it performs, lock gpuspeed max at 1100 @ 0,9v and check for memory erros and hashrate

Branko

sr. member

Activity: 2562

Merit: 321

Interesting card indeed, looks like some mix between 560, 560D and 460

[DeCo]

newbie

Activity: 5

Merit: 0

check again my first post i can now see the image if i click on link.

Anway seems like 560D but clocks are higher 1226.

Checked the original box again, no sign of 560D it's plain pulse box.

I feel riped off Cheesy

I will put heatsink down and check on memory modules what type they are.

Branko

sr. member

Activity: 2562

Merit: 321

Quote from: [DeCo] on November 21, 2017, 02:41:48 PM

Quote from: Branko on November 21, 2017, 02:38:05 PM

Quote from: [DeCo] on November 21, 2017, 02:31:31 PM

Quote from: ?? on ??

Hi guys, I have 4 Sapphire rx 560 cards and but also a problem with one of them: when the Claymore SW starts it indicates that 1 of them has only
14 compute units
whereas the other 3 have
16 compute units

I was wondering if this is a configuration problem or a problem related to the card hardware...

Any help?

Thank you in advance

I want to turn back to this, i'm shocked!

Just want to warn you guys about this saphire card 11267-18-20G

It removes image i dono why :S

http[Suspicious link removed]b.jpg

Now what do you think, should i just flash it over with normal saphire 560, i'm woried about ram speed too much since it's only 1500 now....

thanks

Not quite sure wheres the problem?

1500Mhz ram, 56 tmu , 896 shaders ... it's worse than 460.

Dono if u see picture cuz i just registered but hashrate is terrible

No picture, but maybe you bought 560D, not 560...those really ARE worse than RX460

[DeCo]

newbie

Activity: 5

Merit: 0

Quote from: Branko on November 21, 2017, 02:38:05 PM

Quote from: [DeCo] on November 21, 2017, 02:31:31 PM

Quote from: ?? on ??

Hi guys, I have 4 Sapphire rx 560 cards and but also a problem with one of them: when the Claymore SW starts it indicates that 1 of them has only
14 compute units
whereas the other 3 have
16 compute units

I was wondering if this is a configuration problem or a problem related to the card hardware...

Any help?

Thank you in advance

I want to turn back to this, i'm shocked!

Just want to warn you guys about this saphire card 11267-18-20G

http://http[Suspicious link removed]b.jpg

It removes image i dono why :S

http[Suspicious link removed]b.jpg

Now what do you think, should i just flash it over with normal saphire 560, i'm woried about ram speed too much since it's only 1500 now....

thanks

Not quite sure wheres the problem?

1500Mhz ram, 56 tmu , 896 shaders ... it's worse than 460.

Dono if u see picture cuz i just registered but hashrate is terrible

Branko

sr. member

Activity: 2562

Merit: 321

Quote from: [DeCo] on November 21, 2017, 02:31:31 PM

Quote from: ?? on ??

Hi guys, I have 4 Sapphire rx 560 cards and but also a problem with one of them: when the Claymore SW starts it indicates that 1 of them has only
14 compute units
whereas the other 3 have
16 compute units

I was wondering if this is a configuration problem or a problem related to the card hardware...

Any help?

Thank you in advance

I want to turn back to this, i'm shocked!

Just want to warn you guys about this saphire card 11267-18-20G

It removes image i dono why :S

http[Suspicious link removed]b.jpg

Now what do you think, should i just flash it over with normal saphire 560, i'm woried about ram speed too much since it's only 1500 now....

thanks

Not quite sure wheres the problem?

[DeCo]

newbie

Activity: 5

Merit: 0

Quote from: ?? on ??

Hi guys, I have 4 Sapphire rx 560 cards and but also a problem with one of them: when the Claymore SW starts it indicates that 1 of them has only
14 compute units
whereas the other 3 have
16 compute units

I was wondering if this is a configuration problem or a problem related to the card hardware...

Any help?

Thank you in advance

I want to turn back to this, i'm shocked!

Just want to warn you guys about this saphire card 11267-18-20G

It's very funny it's rx 560 release date is aug 2016, has less shaders , les tmu, and 1500 Mhz memory actually it's worse than 460

http://shrani.si/f/1x/u5/3B7CHo03/saphire560.jpg

Now what do you think, should i just flash it over with normal saphire 560, i'm woried about ram speed too much since it's only 1500 now....

thanks

Topic: RX 560 4GB Ethereum - page 17. (Read 212704 times)