Hi, guys!
I have Gigabyte GV-RX560 GAMING OC-4GD (Hynix(((), without overclocking I have 10.6 Mh/s.
Overclocking memory to 2000, brings an insignificant result. I have over9000 times tried to flash BIOS with different timings, but without success. Once I saw 16 Mh/s, but the driver left at once.
Substituting timings from Micron got 14 Mh/s at 2000 memory frequency it seems kind of stable, but HWinfo shows a lot of memory errors.
The best that could be achieved is 12.9 Mh/s and the overclocking of the memory of 1850 (with a small number of errors). I did not see in this topic that someone paid attention to memory errors. The question is: why does no one monitor errors? P.S.: GPU8 is 1050Ti. P.P.S: Sorry for my french.
Try to downclock core clock to 1050 - 1059. You will see higher rate and a little bit lower power comsumption
Reducing the core frequency to 1050 has really slightly increased the Hash rate, now with a memory frequency of 1900 I have 13.5 Mh/s, with practically no memory errors, more has not yet been achieved. Thank you! The BIOS inserts values from the GPU with Micron memory
https://cloud.mail.ru/public/ERgR/GpdGBMexD.
get back initial strap 1500 timing. after that you will be able to increase memory speed more than 2000+
Nukl, thank you very much for your advice! Now I can access the 2020 Mhz Memory Clock, and I have 14.4 Mh/s, that's enough for me (Claymore's 9. 8 ). Maybe my BIOS will be useful to someone (GV-RX560GAMING-OC-4GD (Hynix)).
https://cloclo9.datacloudmail.ru/weblink/thumb/xw1/7qBU/R63dT3HVj/rx560.jpg?x-email=undefined,
https://cloud.mail.ru/public/JUgC/uwfjv8sJR.
Much appreciated for sharing!
Was your card with the 6pin or without? Your mod was the first to actually give my MSI Aero ITX (Hynix with no 6pin) a solid boost. All the others I've tried seemed to just bump me up around 1Mh/s or actually drop my hash rate. With your mod I went from ~10.9 to ~14.3.
BUT it soon crashes afterwards, so just unsure if I need to try and feed it more power limit, or try and drop the mem clock a bit... Or totally avoid trying to use your bios (hopefully not haha).
What I took from your bios was copying 1500 strap upwards, and copying your max mem freq of 2250. The rest of our #s seemed to line up.
In my quick troubleshooting so far I had tried bumping power limit to 20%, and then 50%, and then max 75%, but all still result in crashing. And since those attempts failed, I'm assuming that means you have the 6pin power
So certainly not looking for you troubleshoot, but if you had any suggestions for my course of action I'd be extra thankful. Really not skilled with modding the bios besides copy/paste, so even just hearing a simple "it wont work regardless" would be beneficial.
Anyways, thanks again for sharing!
